Acidity-Activated Charge-Convertible Silver Nanocomposites for Enhanced Bacteria-Specific Aggregation and Antibacterial Activity

Bactericidal Effect and Cytotoxicity of Graphene Oxide/Silver Nanocomposites

To tackle the proliferation of pathogenic microorganisms without relying on antibiotics, innovative materials boasting antimicrobial properties have been engineered. This study focuses on the development of graphene oxide/silver (GO/Ag) nanocomposites, derived from partially reduced graphene oxide adorned with silver nanoparticles. Various nanocomposites with different amounts of silver (GO/Ag-1, GO/Ag-2, GO/Ag-3, and GO/Ag-4) were synthesized, and their antibacterial efficacy was systematically studied. The silver nanoparticles were uniformly deposited on the partially reduced graphene oxide surface, exhibiting spherical morphologies with an average size of 25 nm. The nanocomposites displayed potent antibacterial properties against both gram-positive bacteria (S. aureus and B. subtilis) and gram-negative bacteria (E. coli and S. enterica) as confirmed by minimum inhibition concentration (MIC) studies and time-dependent experiments. The optimal MIC for Gram-positive bacteria was 62.5 μg/mL and for Gram-negative bacteria was 125 μg/mL for the GO/Ag nanocomposites. Bacterial cells that encountered the nanocomposite films exhibited significantly greater inhibitory effects compared to those exposed to conventional antibacterial materials. Furthermore, the cytotoxicity of these nanocomposites was assessed using human epithelial cells (HEC), revealing that GO/Ag-1 and GO/Ag-2 exhibited lower toxicity levels toward HEC and remained compatible even at higher dilution rates. This study underscores the potential of GO/Ag-based nanocomposites as versatile materials for antibacterial applications, particularly as biocompatible wound dressings, offering promising prospects for wound healing and infection control.

Bactericidal and biocatalytic temperature responsive microgel based self-cleaning membranes for water purification

The present study focuses on creating an antimicrobial and biocatalytic smart gating membrane by synthesizing unique core-shell microgels. The core-shell microgels are synthesized by grafting short chains of poly(ethylenimine) (PEI) onto a poly((N-isopropyl acrylamide)-co-glycidyl methacrylate)) (P(NIPAm-co-GMA)) core. Subsequently, the produced microgels are utilized as a substrate for synthesizing and stabilizing silver nanoparticles (Ag NPs) through an in-situ approach. These Ag NPs immobilized microgels are then suction filtered over a polyethylene terephthalate (PET) track-etched support to create cross-linked composite microgel membranes (CMMs). After structural and permeation characterization of the prepared CMMs, the laccase enzyme is then covalently grafted to the surface of the membrane and tested for its effectiveness in degrading Reactive red-120 dye. The laccase immobilized biocatalytic CMMs show effective degradation of the Reactive red-120 by 71%, 48%, and 34% at pH 3, 4, and 5, respectively. Furthermore, the immobilized laccase enzyme showed better activity and stability in terms of thermal, pH, and storage compared to the free laccase, leading to increased reusability. The unique combination of Ag NPs and laccase on a thermoresponsive microgel support resulted in a responsive self-cleaning membrane with excellent antimicrobial and dye degradation capabilities for environmentally friendly separation technology.

Dual-responsive antibiotic and baicalein co-delivery nanoparticles with enhanced synergistic antibacterial activity

Globally, due to the rapid development of bacterial resistance, bacterial infections lead to significant mortality and morbidity which require efficient strategies to eradicate these infections. Herein, we prepared a dual-responsive synergistic drug delivery nanoparticle carrier (NPS@Bai/Cip), which responds to sub-acid bacterial microenvironments and targets phosphatase or phospholipase at infection sites. Nanoparticles surfaces were positively (10.0 mV) charged under acidic conditions, leading to good bacterial adhesion and enhanced drug accumulation. NPS@Bai/Cip showed good antibacterial and anti-biofilm activity against drug-resistant Pseudomonas aeruginosa. NPS@Bai/Cip could inhibit the biofilm formation via affecting the swimming, swarming, and twitching motilities of P. aeruginosa. NPS@Bai/Cip was used to treat drug-resistance P. aeruginosa-induced infection in rats by improving wound healing and reducing inflammatory responses. Thus, NPS@Bai/Cip functioned as an antibacterial and antibiofilm agent with good potential for treating bacteria-induced infections.

Dual-Responsive Curcumin-Loaded Nanoparticles for the Treatment of Cisplatin-Induced Acute Kidney Injury

Acute kidney injury (AKI) has been a global public health concern leading to high patient morbidity and mortality in the world. Nanotechnology-mediated antioxidative therapy has facilitated the treatment of AKI. Herein, a hierarchical curcumin-loaded nanodrug delivery system (NPS@Cur) was fabricated for antioxidant therapy to ameliorate AKI. The nanoplatform could respond to subacidic and reactive oxygen species (ROS) microenvironments. The subacidic microenvironment led to a smaller size (from 140.9 to 99.36 nm) and positive charge (from -4.9 to 12.6 mV), contributing to the high accumulation of nanoparticles. An excessive ROS microenvironment led to nanoparticle degradation and drug release. In vitro assays showed that NPS@Cur could scavenge excessive ROS and relieve oxidative stress in H₂O₂-induced HK-2 cells through reduced apoptosis, activated autophagy, and decreased endoplasmic reticulum stress. Results from cisplatin-induced AKI models revealed that NPS@Cur could effectively alleviate mitochondria injury and protect kidneys via antioxidative protection, activated autophagy, decreased endoplasmic reticulum stress, and reduced apoptosis. NPS@Cur showed excellent biocompatibility and low toxicity to primary tissues in mice. These results revealed that NPS@Cur may be a potential therapeutic strategy for efficiently treating cisplatin or other cause-induced AKI.

Phosphorylcholine zwitterionic shell-detachable mixed micelles for enhanced cancerous cellular uptakes and increased DOX release

To further enhance the cancerous cellular uptakes and increase the drug release of the drug loaded micelles, herein, we fabricated a series of mixed micelles with different mass ratios using two amphiphilic copolymers P(DMAEMA-co-MaPCL) and PCL-SS-PMPC. The mixed micelles showed a prolonged circulation time due to the zwitterionic shells in a physiological environment (pH 7.4). In addition, because of the protonation of tertiary amine groups in PDMAEMA and the breakage of the disulfide bond in PMPC-SS-PCL in a tumor microenvironment, the mixed micelles aggregated, which led to enhanced cancerous cellular penetration and increased DOX release. Moreover, cytotoxicity assay showed that the mixed micelles had good biocompatibility to L929, HeLa and MCF-7 cells, even at a concentration of up to 1 mg mL^-1. Furthermore, enhanced antitumour activity and cellular uptake of HeLa and MCF-7 cells were detected after loading with DOX, which was determined by confocal laser scanning microscopy (CLSM) and flow cytometry (FC), especially for the DOX@MIX 3 micelles (20% mass ratio of the P(DMAEMA-co-MaPCL)). Therefore, the mixed strategy provides a simple and efficient ways to promote anticancer drug delivery.

Recent Advances and Mechanistic Insights into Antibacterial Activity, Antibiofilm Activity, and Cytotoxicity of Silver Nanoparticles

The substantial increase in multidrug-resistant (MDR) pathogenic bacteria is a major threat to global health. Recently, the Centers for Disease Control and Prevention reported possibilities of greater deaths due to bacterial infections than cancer. Nanomaterials, especially small-sized (size ≤10 nm) silver nanoparticles (AgNPs), can be employed to combat these deadly bacterial diseases. However, high reactivity, instability, susceptibility to fast oxidation, and cytotoxicity remain crucial shortcomings for their uptake and clinical application. In this review, we discuss various AgNPs-based approaches to eradicate bacterial infections and provide comprehensive mechanistic insights and recent advances in antibacterial activity, antibiofilm activity, and cytotoxicity (both in vitro and in vivo) of AgNPs. The mechanistic of antimicrobial activity involves four steps: (i) adhesion of AgNPs to cell wall/membrane and its disruption; (ii) intracellular penetration and damage; (iii) oxidative stress; and (iv) modulation of signal transduction pathways. Numerous factors affecting the bactericidal activity of AgNPs such as shape, size, crystallinity, pH, and surface coating/charge have also been described in detail. The review also sheds light on antimicrobial photodynamic therapy and the role of AgNPs versus Ag⁺ ions release in bactericidal activities. In addition, different methods of synthesis of AgNPs have been discussed in brief.

An acid-triggered BODIPY-based photosensitizer for enhanced photodynamic antibacterial efficacy

An acid-triggered photodynamic antibacterial nanoplatform (IBPAAs) was constructed by co-assembly of an acid-triggered photosensitizer BODIPY (I-NBDP) and the POEGMA-b-PDEAEMA block copolymer for enhancing the antibacterial efficacy.

Co-delivery of antibiotic and baicalein by using different polymeric nanoparticle cargos with enhanced synergistic antibacterial activity

To evaluate the effect of polymer structures on their unique characteristics and antibacterial activity, this study focused on developing amphiphilic copolymers by using three different molecules through RAFT polymerization. Three amphiphilic copolymers, namely, PBMA-b-(PDMAEMA-r-PPEGMA) (BbDrE), (PBMA-r-PDMAEMA)-b-PPEGMA (BrDbE), and PBMA-r-PDMAEMA-r-PPEGMA (BrDrE), are successfully self-assembled into spherical or oval shaped nanoparticles in aqueous solution and remain stable in PBS, LB, and 10% FBS solutions for at least 3 days. The critical micelle concentrations are 0.012, 0.025, and 0.041 mg/mL for BbDrE, BrDbE, and BrDrE, respectively. The zeta potential values under pH 5.5 and pH 7.4 conditions are 3.18/0.19, 8.57/0.046, and 2.54/-0.69 mV for BbDrE, BrDbE, and BrDrE nanoparticles, respectively. The three copolymers with similar monomer compositions show similar molecular weight and thermostability. Baicalein (BA) and ciprofloxacin (CPX) are encapsulated into the three nanoparticles to obtain BbDrE@BA/CPX, BrDbE@BA/CPX, and BrDrE@BA/CPX nanocomposites, with LC values of 63.9/78.3, 63.9/74.7, and 55.3/64.8, respectively. The two drugs are released from the three drug-loaded nanocomposites with 60%-95% release in pH 5.5 over 24 h and 15%-30% release in pH 7.4. The drug-loaded nanocomposites show synergistic antibacterial activity than the naked drug (2-8 fold reduction for CPX) or single drug-loaded nanocomposites (4-8 fold reduction for CPX) against Pseudomonas aeruginosa and Staphylococcus aureus. The drug-loaded nanocomposites inhibit the formation of bacterial biofilms above their MIC values and eliminate bacterial biofilms observed by fluorescent microscope. Finally, the nanocomposites improve the healing of infection induced by P. aeruginosa and S. aureus on rat dermal wounds. These results indicate that antimicrobial agents with different structures could be an alternative treatment strategy for bacteria-induced infection.

Surface Functional Nanofiber Membrane for Ultrasensitive and Naked-Eye Visualization of Bacterial Concentration

Bacterial contamination in water is a serious health risk to human beings, so it is very important to realize the point-of-care (POC) bacterial detection in water. However, the traditional bacterial detection methods are time-consuming, professional- and equipment-dependent, and do not meet the needs of POC detection. There is a pressing need to develop a platform for POC bacterial detection to defeat the increasing risk of bacterial infections. Herein, a surface functional nanofiber membrane (NFM) is prepared by layer-by-layer (LBL) self-assembly as a platform for POC detection of bacterial concentration; it is naked-eye visualization and ultrasensitive. The platform shows obvious bacterial responsiveness, which allows naked-eye visualization of bacterial concentration (10²-10⁶ CFU/mL) within 30 min and can quantitatively detect the bacterial concentration (10¹-10⁶ CFU/mL) by fluorescence within 5 min. The platform not only exhibits high efficiency but also has a low threshold for bacterial concentration detection. Furthermore, the platform shows good consistency with traditional methods in the detection of bacteria in practical water samples, and has the potential for use in detecting bacterial concentrations in water supplies to protect human beings from health hazards. This work also provides useful reference for research on bacterial detection, taking advantage of the surface characteristics of bacteria and the high sensitivity of NFM.

Antimicrobial Activity of Hybrid Nanomaterials Based on Star and Linear Polymers of N,N'-Dimethylaminoethyl Methacrylate with In Situ Produced Silver Nanoparticles

Well-defined linear and multi-arm star polymer structures were used as the templates for in situ synthesis and stabilization of silver nanoparticles (AgNPs). This approach led to hybrid nanomaterials with high stability and antibacterial activity to both Gram-positive and Gram-negative bacterial strains. The ecologically friendly so called “green” synthesis of nanomaterials was performed through AgNPs preparation in the aqueous solutions of star and linear poly(N,N′-dimethylaminoethyl methacrylate)s (PDMAEMAs); the process was followed with time. The size, shape, and zeta potential of the obtained hybrids were determined. To our knowledge, this is the first time that the antibacterial activity of PDMAEMA hybrid nanomaterial against Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa was investigated and assessed by minimum inhibitory concentration (MIC) and minimum biocidal concentration (MBC). Completely quaternized with ethyl bromide, star and linear PDMAEMAs were used in comparative biological tests. The modification of the polymers with in situ-formed AgNPs increased the antibacterial properties against all studied strains of bacteria by several times in comparison to non-modified polymers and quaternized polymers. These results yield novel nanohybrid materials that can be useful for applications in medicine and biology.

Protonation-Activity Relationship of Bioinspired Ionizable Glycomimetics for the Growth Inhibition of Bacteria

Variations in physiological parameters (i.e., pH, redox potential, and ions) for distinct types of diseases make them attractive targets. Ionizable groups capable of pH-dependent charge conversion impart pH-switchable materials under acid condition through the protonation effect, which stimulates the emergence of various pH-inspired materials. However, it is confusing to distinguish preferable groups for high-efficiency drug-delivery vehicles attributing to the lack of perceiving the relationship between protonation and activity. Herein, we developed a series of bioinspired ionizable glycomimetics responses to the ambient variation from physiological environment (pH 7.4) to bacterial infectious acidic microenvironment (pH 6.0) to explore the protonation-activity relationship of various ionizable groups. The nanoparticles are coated with bacterial adhesion molecules galactose and fucose to target Pseudomonas aeruginosa. Moreover, the particle cores were composed of ionizable polymers responding to acidic microenvironment changes and entrapped antibiotic payload. Ionizable glyconanoparticles targeted bacteria and local cues as triggers to transfer payloads in on-demand patterns for the inhibition of bacteria-related infection. Significantly, we find that the nanoparticles with the pH-sensitive block of ionizable poly(2-(diisopropylamino)ethyl methacrylate) (pDPA) exhibit predominant bacterial adhesion and killing and growth inhibition of biofilm in acid environment (pH 6.0) due to the ionizable polymer protonation effect with more positive charge cooperated with the lectin-targeted effect of polysaccharide causing a huge bacterial aggregation and a highly favorable germicidal effect. The nanoparticles with poly(2-(hexamethyleneimino)ethyl methacrylate) (pHMEMA) have suboptimal antibacterial activity but advanced protonation at pH 6.3 compared to pDPA at 6.1, suggesting its selection as an applicable pH-switchable group for a slightly higher acid microenvironment like tumor (pH 6.9-6.5) because of the efficient performance after protonation than at deprotonation. On the other hand, the glycomimetic containing poly(2-(dibutylamino)ethyl methacrylate) (pDBA) as a pH-sensitive moiety displayed weak antimicrobial activity and superior stability before protonation (pH 4.7), which make it possible to prevent premature drug leakage, suggesting that pDBA is a good candidate to be applied to construct pH-sensitive drug-delivery carriers for the treatment of bacteria-related infection with a low acidic microenvironment. Overall, the structure-activity relationship of ionizable glycomimetics for the inhibition of bacteria signifies not only the development of a drug-delivery system but also the mechanism-dependent treatment of nanomedicine for infectious diseases.

Ag-Conjugated graphene quantum dots with blue light-enhanced singlet oxygen generation for ternary-mode highly-efficient antimicrobial therapy

The increasing prevalence of antibiotic resistance highlights the need for new antibacterial drugs and, in particular, the development of alternative approaches such as photodynamic therapy (PDT) and photothermal therapy (PTT) to manage this growing issue. In the present study, a broad-spectrum antibacterial system was produced in which Ag nanoparticle-conjugated graphene quantum dots (GQD-AgNP) were utilised as a blue light-enhanced nanotherapeutic for efficient ternary-mode antimicrobial therapy. The successful conjugation of AgNPs onto the surface of GQDs can significantly improve the production of reactive oxygen species in light-activatable GQDs and the transformation of light energy to hyperthermia with high efficiency. There was a remarkable increase in the sample temperature of nearly 40 °C via photoexcitation after only 10 min of 450 nm laser exposure (14.2 mW cm^-2). The hybrids exhibited much more efficient bactericidal capability against both Gram-negative and Gram-positive bacteria compared with GQDs alone, using 450 nm light irradiation. This is likely a consequence of their enhanced PDT, concomitant PTT, and the synergistic function of AgNPs. The antibacterial mechanism of the new-style nanocomposites was found to irreversibly destroy the bacterial membrane structure, leading to the leaking out of the cytoplasmic contents and the death of the bacteria. At low doses, the biocompatible GQD-AgNP hybrids promoted healing in bacteria-infected rat wounds, with negligible adverse impact to the normal tissue, indicating a promising future for combined photodynamic and photothermal antibacterial applications in clinical medicine.