Preparation of Microcrystals of Piroxicam Monohydrate by Antisolvent Precipitation via Microfabricated Metallic Membranes with Ordered Pore Arrays

Development of long-acting injectable suspensions by continuous antisolvent crystallization: An integrated bottom-up process

Our present work elucidated the operational feasibility of direct generation and stabilization of long-acting injectable (LAI) suspensions of a practically insoluble drug, itraconazole (ITZ), by combining continuous liquid antisolvent crystallization with downstream processing (i.e., centrifugal filtration and reconstitution). A novel microchannel reactor-based bottom-up crystallization setup was assembled and optimized for the continuous production of micro-suspension. Based upon the solvent screening and solubility study, N-methyl pyrrolidone (NMP) was selected as the optimal solvent and an impinging jet Y-shaped microchannel reactor (MCR) was selected as the fluidic device to provide a reproducible homogenous mixing environment. Operating parameters such as solvent to antisolvent ratio (S/AS), total jet liquid flow rates (TFRs), ITZ feed solution concentration and the maturation time in spiral tubing were tailored to 1:9 v/v, 50 mL/min, 10 g/100 g solution, and 96 h, respectively. Vitamin E TPGS (0.5% w/w) was found to be the most suitable excipient to stabilize ITZ particles amongst 14 commonly used stabilizers screened. The effect of scaling up from 25 mL to 15 L was evaluated effectively with in situ monitoring of particle size distribution (PSD) and solid-state form. Thereafter, the suspension was subjected to centrifugal filtration to remove excess solvent and increase ITZ solid fraction. As an alternative, an even more concentrated wet pellet was reconstituted with an aqueous solution of 0.5% w/w Vitamin E TPGS as resuspending agent. The ITZ LAI suspension (of 300 mg/mL solid concentration) has the optimal PSD with a D10 of 1.1 ± 0.3 µm, a D50 of 3.53 ± 0.4 µm and a D90 of 6.5 ± 0.8 µm, corroborated by scanning electron microscopy (SEM), as remained stable after 548 days of storage at 25 °C. Finally, in vitro release methods using Dialyzer, dialysis membrane sac were investigated for evaluation of dissolution of ITZ LAI suspensions. The framework presented in this manuscript provides a useful guidance for development of LAI suspensions by an integrated bottom-up approach using ITZ as model API.

Antisolvent Crystallization of Telmisartan Using Stainless-Steel Micromixing Membrane Contactors

Controlled continuous crystallization of the active pharmaceutical ingredient (API) telmisartan (TEL) has been conducted from TEL/DMSO solutions by antisolvent crystallization in deionized water using membrane micromixing contactors. The purpose of this work was to test stainless-steel membranes with ordered 10 μm pores spaced at 200 μm in a stirred-cell (batch, LDC-1) and crossflow (continuous, AXF-1) system for TEL formation. By controlling the feed flow rate of the API and solvent, through the membrane pores as well as the antisolvent flow, it was possible to tightly control the micromixing and with that to control the crystal nucleation and growth. Batch crystallization without the membrane resulted in an inhomogeneous crystallization process, giving a mixture of crystalline and amorphous TEL materials. The rate of crystallization was controlled with a higher DMSO content (4:1 DMSO/DI water), resulting in slower crystallization of the TEL material. Both membrane setups, stirred batch and the crossflow, yielded the amorphous TEL particles when deionized water was used, while a crystalline material was produced when a mixture of DI water and DMSO was used.

Recent Progress of Antisolvent Crystallization

Antisolvent crystallization is a significant unit operation in the pharmaceutical industry, especially on drug crystal properties optimization. This paper firstly highlights the applications of antisolvent crystallization in crystal engineering. Antisolvent...

Osteogenic effects in a rat osteoporosis model and femur defect model by simvastatin microcrystals

Simvastatin is a translational drug that may be used to induce local bone formation. In this study, simvastatin microcrystals were made by a wet media milling method, and then we verified the osteogenic effect of the microcrystals in rat ovariectomy (OVX)-induced osteoporosis and femur defect models. For the osteoporosis model, we delivered simvastatin microcrystals to the tibia with poloxamer hydrogels via an intraosseous injection. Bone mineral density and the ultimate force of the treated tibia were significantly improved after injection of simvastatin microcrystals at 0.5 and 1 mg compared with the OVX or 0-mg control groups. For the femur defect model, simvastatin microcrystals were incorporated in clinically used calcium phosphate cements (CPCs) as an implant. Quantitative analysis of bone regeneration by microcomputed tomography (μCT) showed improved bone morphology with simvastatin microcrystals at 50 and 100 μg, compared with the CPC vehicle. A semiquantitative scale for histology assessment further demonstrated a higher bone regeneration score in the drug-loaded groups. Our study shows that simvastatin microcrystals can promote bone formation by local delivery using a poloxamer hydrogel or CPC, which may be translationally useful.

Preventing Crystal Agglomeration of Pharmaceutical Crystals Using Temperature Cycling and a Novel Membrane Crystallization Procedure for Seed Crystal Generation

In this work, a novel membrane crystallization system was used to crystallize micro-sized seeds of piroxicam monohydrate by reverse antisolvent addition. Membrane crystallization seeds were compared with seeds produced by conventional antisolvent addition and polymorphic transformation of a fine powdered sample of piroxicam form I in water. The membrane crystallization process allowed for a consistent production of pure monohydrate crystals with narrow size distribution and without significant agglomeration. The seeds were grown in 350 g of 20:80 w/w acetone-water mixture. Different seeding loads were tested and temperature cycling was applied in order to avoid agglomeration of the growing crystals during the process. Focused beam reflectance measurement (FBRM); and particle vision and measurement (PVM) were used to monitor crystal growth; nucleation and agglomeration during the seeded experiments. Furthermore; Raman spectroscopy was used to monitor solute concentration and estimate the overall yield of the process. Membrane crystallization was proved to be the most convenient and consistent method to produce seeds of highly agglomerating compounds; which can be grown via cooling crystallization and temperature cycling.