Exposure Assessment of Toxicologically Relevant Volatile Organic Compounds Emitted from Polymer-Based Costume Masks

Enhancing Odor Analysis with Gas Chromatography-Olfactometry (GC-O): Recent Breakthroughs and Challenges

Gas chromatography-olfactometry (GC-O) has made significant advancements in recent years, with breakthroughs in its applications and the identification of its limitations. This technology is widely used for analyzing complex odor patterns. The review begins by explaining the principles of GC-O, including sample preparation, separation methods, and olfactory evaluation techniques. It then explores the diverse range of applications where GC-O has found success, such as food and beverage industries, environmental monitoring, perfume and aroma development, and forensic analysis. One of the major breakthroughs in GC-O analysis is the improvement in separation power and resolution of odorants. Techniques like rapid GC, comprehensive two-dimensional GC, and multidimensional GC have enhanced the identification and quantification of odor-active chemicals. However, GC-O also has limitations. These include the challenges in detecting and quantifying trace odorants, dealing with matrix effects, and ensuring the repeatability and consistency of results across laboratories. The review examines these limitations closely and discusses potential solutions and future directions for improvement in GC-O analysis. Overall, this review presents a comprehensive overview of the recent advances in GC-O, covering breakthroughs, applications, and limitations. It aims to promote the wider usage of GC-O analysis in odor analysis and related industries. Researchers, practitioners, and anyone interested in leveraging the capabilities of GC-O in analyzing complex odor patterns will find this review a valuable resource. The article highlights the potential of GC-O and encourages further research and development in the field.

Microplastics and volatile organic compounds released from face masks after disinfection: Layers and materials differences

Effective disinfection methods are critical for ensuring the reusability of masks, yet these methods may inadvertently introduce health concerns associated with microplastics (MPs) and volatile organic compounds (VOCs). This study investigated the impact of ultraviolet germicidal irradiation (UVGI) and sodium hypochlorite (NaClO) bleaching on mask filter layers composed of four distinct materials. Our results revealed that UVGI induced more pronounced damage compared to bleaching, leading to the significant release of both MPs and VOCs. After UVGI treatment at conventional disinfection doses, meltblown (MB) fabrics released MPs reaching 864 ± 182 μg/g (92 ± 19 particles/g). For all filter layers, the quantity of released MPs followed the order: MB > HDPE>PU ≈ NW. These MPs were identified as degraded debris from the mask filter layers. The specific VOCs generated varied depending on the material composition. Non-woven (NW) and MB fabrics, both comprised of polypropylene, predominantly produced various branched aliphatic hydrocarbons and their derivative oxides. The cotton-like fabric, composed of high-density polyethylene, primarily emitted different linear aliphatic hydrocarbons and oxygenates. In contrast, the polyurethane filter layer of reusable masks released aromatic compounds, nitrogenous compounds, and their oxidation products. The formation of VOCs was primarily attributed to bond breakage and oxidative damage to the filter structure resulting from the disinfection process. In summary, as UVGI induced higher yields of MPs and VOCs compared to bleaching, the latter would be a safer option for mask disinfection.

Chemometrics-based Discrimination of Virgin and Recycled Acrylonitrile-Butadiene-Styrene Plastics Toys via Non-targeted Screening of Volatile Substances

Owing to the growing emphasis on child safety, it is greatly urgent to identify and assess the unknown compounds and discriminate the recycled materials for plastic toys. In this study, gas chromatography mass spectrometry coupled with static headspace has been optimized by response surface methodology for non-targeted screening of unknown volatiles in acrylonitrile-butadiene-styrene (ABS) plastic toys. Optimum conditions for static headspace were 120 °C for extraction temperature and 48 min for extraction time. A total of 83 volatiles in 11 categories were qualitatively identified by matching the NIST database library, retention index and standard materials. Considering high positive rate and potential toxicity, high-risk volatiles in ABS plastic toys were listed and traced for safety pre-warning. Moreover, the differential volatiles between virgin and recycled ABS plastics were screened out by orthogonal partial least-squares discrimination analysis. Principal component analysis, hierarchical cluster analysis and linear discrimination analysis were employed to successfully discriminate recycled ABS plastic toys based on the differential volatiles. The proposed strategy represents an effective and promising analytical method for non-targeted screening and risk assessment of unknown volatiles and discrimination of recycled materials combining with various chemometric techniques for children's plastic products to safeguard children's health.

Face Mask as a Versatile Sampling Device for the Assessment of Personal Exposure to 54 Toxic Compounds in Environmental Tobacco Smoke

Exposure to environmental tobacco smoke (ETS), which contains hundreds of toxic compounds, significantly increases the risk of developing many human diseases, including lung cancer. The most common method of assessing personal exposure to ETS-borne toxicants is by sampling sidestream smoke generated by a smoking machine through a sorbent tube or filter, followed by solvent extraction and instrumental analysis. However, the ETS sampled may not truly represent the ETS in the ambient environment, due to complicating factors from the smoke released by the burning end of the cigarette and from the absorption of the chemicals in the respiratory tract of the smoker. In this study, we developed and validated an alternative air sampling method involving breathing through a face mask to simultaneously determine personal exposure to 54 ETS-borne compounds, including polycyclic aromatic hydrocarbons, aromatic amines, alkaloids, and phenolic compounds in real smoking scenarios. The newly developed method was used to evaluate the risk associated with exposure to ETS released from conventional cigarettes (CCs) and that from novel tobacco products such as e-cigarettes (ECs) and heated tobacco products (HTPs), with the observation of cancer risk associated with exposure to ETS released from CCs significantly higher than that from ECs and HTPs. It is anticipated that this method offers a convenient and sensitive way to collect samples for assessing the health impacts of ETS exposure.

Volatile Compound Emissions from Stereolithography Three-Dimensional Printed Cured Resin Models for Biomedical Applications

Stereolithography three-dimensional printing is used increasingly in biomedical applications to create components for use in healthcare and therapy. The exposure of patients to volatile organic compounds (VOCs) emitted from cured resins represents an element of concern in such applications. Here, we investigate the biocompatibility in relation to inhalation exposure of volatile emissions of three different cured commercial resins for use in printing a mouthpiece adapter for sampling exhaled breath. VOC emission rates were estimated based on direct analysis using a microchamber/thermal extractor coupled to a proton transfer reaction-mass spectrometer. Complementary analyses using comprehensive gas chromatography-mass spectrometry aided compound identification. Major VOCs emitted from the cured resins were associated with polymerization agents, additives, and postprocessing procedures and included alcohols, aldehydes, ketones, hydrocarbons, esters, and terpenes. Total VOC emissions from cubes printed using the general-purpose resin were approximately an order of magnitude higher than those of the cubes printed using resins dedicated to biomedical applications at the respective test temperatures (40 and 25 °C). Daily inhalation exposures were estimated and compared with daily tolerable intake levels or standard thresholds of toxicological concerns. The two resins intended for biomedical applications were deemed suitable for fabricating an adapter mouthpiece for use in breath research. The general-purpose resin was unsuitable, with daily inhalation exposures for breath sampling applications at 40 °C estimated at 310 μg day^-1 for propylene glycol (tolerable intake (TI) limit of 190 μg day^-1) and 1254 μg day^-1 for methyl acrylate (TI of 43 μg day^-1).

Sampling Volatile Organic Compound Emissions from Consumer Products: A Review

Volatile organic compounds (VOCs) are common constituents of many consumer products. Although many VOCs are generally considered harmless at low concentrations, some compound classes represent substances of concern in relation to human (inhalation) exposure and can elicit adverse health effects, especially when concentrations build up, such as in indoor settings. Determining VOC emissions from consumer products, such as toys, utensils or decorative articles, is of utmost importance to enable the assessment of inhalation exposure under real-world scenarios with respect to consumer safety. Due to the diverse sizes and shapes of such products, as well as their differing uses, a one-size-fits-all approach for measuring VOC emissions is not possible, thus, sampling procedures must be chosen carefully to best suit the sample under investigation. This review outlines the different sampling approaches for characterizing VOC emissions from consumer products, including headspace and emission test chamber methods. The advantages and disadvantages of each sampling technique are discussed in relation to their time and cost efficiency, as well as their suitability to realistically assess VOC inhalation exposures.

Polyurethane Foam Face Masks as a Dosimeter for Quantifying Personal Exposure to Airborne Volatile and Semi-Volatile Organic Compounds

Airborne volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) are commonly quantitated by collecting the analytes on solid sorbent tubes or passive air samplers, followed by solvent extraction and instrumental analysis, or by grab bag/canister measurements. We report herein a user-friendly sampling method by breathing through polyurethane foam (PUF) face masks to collect airborne VOCs and SVOCs for chemical analysis. Specifically, dibasic esters, phthalate esters, polycyclic aromatic hydrocarbons, linalool, and nicotine trapped on PUF masks were quantitated by gas chromatography-mass spectrometry analysis as model VOCs and SVOCs. Results showed that the amount of these model VOCs and SVOCs trapped on PUF masks is proportional to the exposure duration. After cross-validation by parallel sampling using XAD-2 packed sorbent tubes, the method was used to quantitate VOCs and SVOCs in a variety of indoor and outdoor environments with varying air concentrations of analytes, temperature, humidity, and wind speed. Because air pollution is considered a major cause of many human diseases and premature deaths and the developed PUF mask sampling method showed high trapping efficiencies for both VOCs and SVOCs, it is believed that the developed sampling method will find wide application in assessing air pollution-associated disease risks with possible extension to more classes of VOCs and SVOCs when coupled with suitable instrumental detection methods.

On the Flip Side of Mask Wearing: Increased Exposure to Volatile Organic Compounds and a Risk-Reducing Solution

Surgical masks have been worn by the public worldwide during the COVID-19 pandemic, yet hazardous chemicals in the petroleum-derived polymer layer of masks are currently ignored and unregulated. These organic compounds pose potential health risks to the mask wearer through dermal contact or inhalation. Here, we show that surgical masks from around the world are loaded with semivolatile and volatile organic compounds (VOCs), including alkanes, polycyclic aromatic hydrocarbons (PAHs), phthalate esters, and reactive carbonyls at ng to μg/mask levels. Naphthalene was the most abundant mask-borne PAH, accounting for over 80% of total PAH levels; acrolein, a mutagenic carbonyl, was detected in most of the mask samples, and di(2-ethylhexyl) phthalate, an androgen antagonist, was detected in one-third of the samples. Furthermore, there is large mask-to-mask variability of the residue VOCs, revealing the uneven quality of masks. We confirm that masks containing more residue VOCs lead to significantly higher exposure levels and associated disease risks to the wearer, which should warrant the attention of the general public and regulatory agencies. We find that heating the masks at 50 °C for as short as 60 min lowers the total VOC content by up to 80%, providing a simple method to limit our exposure to mask-borne VOCs.