Horizontal Single-Walled Carbon Nanotube Arrays: Controlled Synthesis, Characterizations, and Applications

Orientation Sensitive SEIRA Sensors Based on Single-Walled Carbon Nanotube Near Fields

Molecular vibrations that bear information about intrinsic properties of chemical compounds are challenging to detect at submonolayer densities. Surface-enhanced infrared absorption (SEIRA) spectroscopy has been proven to be a viable approach to enhance and detect weak vibration signals. Here, we report a SEIRA sensor based on mid-infrared surface plasmon resonances supported by single-walled carbon nanotubes (SWCNTs). Due to the 1D nature of SWCNTs, their plasmon modes are highly polarized with the electromagnetic fields spatially confined to nanometer scales. Leveraging these characteristics of SWCNTs, we observe a polarization selective coupling between their surface plasmons and vibrational modes of chemical bonds introduced onto their surfaces. A maximum modulation of ∼15% to the plasmon resonance peak is obtained for a submonolayer chemical group coverage. These findings suggest that SWCNTs may potentially serve as a highly sensitive SEIRA platform for revealing intricate information about molecular compositions and bond orientations.

"Surface-Like Growth" Strategy for the Direct Synthesis of Horizontally Aligned Boron Nitride Nanotubes

The inherent properties of boron nitride nanotubes (BNNTs) can be further enhanced through the control of their anisotropy. In particular, horizontally aligned BNNTs (HABNNTs) exhibit considerable potential for various applications. However, directly synthesizing HABNNTs is difficult owing to the random floating of BNNTs and the absence of directional forces. Here, we employed a simple, efficient, and universal "surface-like growth" strategy to synthesize high-density and high-quality HABNNTs in the W2B5/Zn precursor system. First, the floating range of BNNTs was restricted to the vicinity of the precursor, and then, directional forces were applied to induce BNNT directional growth along the substrate surface. Experiments and simulations confirmed that the HABNNT orientation could be controlled through manipulation of the directional forces. Furthermore, the strategy was employed for HABNNTs synthesis using the MoB2/Zn, further demonstrating the universality of the approach. Overall, this work offers a fresh perspective on the synthesis of HABNNTs, further expanding their potential applications.

Post-Formation of Fused Pentagonal Structure on Fjord Region of Polyaromatic Hydrocarbons under Hydrothermal Conditions

This study explores the synthesis of cyclopenta-fused polyaromatic hydrocarbons (CP-PAHs) via Pt-catalyzed cyclization in water, focusing on the formation of fused pentagonal rings within heavily fused PAH frameworks. Utilizing platinum catalysts at lower temperatures (200-260 °C) in water, led to the successful synthesis of singly cyclized CP-PAHs. The reaction conditions facilitated the mono-cyclization of substrates such as dibenzo[g,p]chrysene and its isomers, yielding the desired products while suppressing the formation of bis-cyclized compounds. The use of Fe2O3 as an additive in conjunction with PtO2 was effective to suppress hydrogenation of the substrates and products. The products exhibited a redshift in UV-visible absorption and photoluminescence bands due to a decrease in the HOMO-LUMO energy gap. These findings highlight the potential of Pt-catalyzed cyclization for the controlled synthesis of CP-PAHs, with implications for various applications in materials science.

Orientation and stretching of supracolloidal chains of diblock copolymer micelles by spin-coating process

Supracolloidal chains consisting of nano- or micro-scale particles exhibit anisotropic properties not observed in individual particles. The orientation of the chains is necessary to manifest such characteristics on a macroscopic scale. In this study, we demonstrate the orientation of supracolloidal chains composed of nano-scale micelles of a diblock copolymer through spin-coating. We observed separate chains coated on a substrate with electron microscopy, and analyzed the orientation and stretching of the chains quantitatively with image analysis software. In drop-casting, the chains were coated randomly with no preferred orientation, and the degree of stretching exhibited an intrinsic semi-flexible nature. In contrast, spin-coated chains were aligned in the radial direction, and the apparent persistence length of the chain increased, confirming the stretching of the chain quantitatively. Furthermore, by incorporating fluorophores into supracolloidal chains and confirming the oriented chains with confocal fluorescence microscopy, it is demonstrated that oriented chains can be utilized as a template to align functional materials.

An efficient approach toward production of near-zigzag single-chirality carbon nanotubes

Synthesizing single-walled carbon nanotubes (SWCNTs) with a narrow chirality distribution is essential for obtaining pure chirality materials through postgrowth sorting techniques. Using carbon monoxide chemical vapor deposition, we devise a ruthenium (Ru) catalyst supported by silica for the bulk production of SWCNTs containing only a few (n, m) species. The result is attributed to the limited carbon dissociation on the supported Ru clusters, favoring the growth of only small-diameter SWCNTs at comparable growth rates. The resulting materials expedite high-purity single chirality separation using gel chromatography, leading to unprecedented yields of 3.5% for (9, 1) and 5.2% for (9, 2) nanotubes, which surpass those separated from HiPco SWCNTs by two orders of magnitude. This work sheds light on the large-quantity synthesis of SWCNTs with enriched species beyond near-armchair ones for their high-yield separation.

Nanotechnological advances in cancer: therapy a comprehensive review of carbon nanotube applications

Nanotechnology is revolutionising different areas from manufacturing to therapeutics in the health field. Carbon nanotubes (CNTs), a promising drug candidate in nanomedicine, have attracted attention due to their excellent and unique mechanical, electronic, and physicochemical properties. This emerging nanomaterial has attracted a wide range of scientific interest in the last decade. Carbon nanotubes have many potential applications in cancer therapy, such as imaging, drug delivery, and combination therapy. Carbon nanotubes can be used as carriers for drug delivery systems by carrying anticancer drugs and enabling targeted release to improve therapeutic efficacy and reduce adverse effects on healthy tissues. In addition, carbon nanotubes can be combined with other therapeutic approaches, such as photothermal and photodynamic therapies, to work synergistically to destroy cancer cells. Carbon nanotubes have great potential as promising nanomaterials in the field of nanomedicine, offering new opportunities and properties for future cancer treatments. In this paper, the main focus is on the application of carbon nanotubes in cancer diagnostics, targeted therapies, and toxicity evaluation of carbon nanotubes at the biological level to ensure the safety and real-life and clinical applications of carbon nanotubes.

Sorting of Cluster-Confined Metallic Single-Walled Carbon Nanotubes for Fabricating Atomically Vacant Uranium Oxide

Single-walled carbon nanotube (SWCNT) heterostructures have shown great potential in catalysis, magnetism, and nanofluidics, in which host SWCNTs with certain conductivity (metallic or semiconducting) are highly required. Herein, inspired by the large molecular weight and redox properties of polyoxometalate (POM) clusters, we reported the selective separation of POM encapsulated metallic SWCNTs (POM@m-SWCNTs) with a uniform diameter through density gradient ultracentrifugation (DGU). The confined POMs increased the SWCNT density and amplified the nanotubes' density difference, thus greatly lowering the centrifugal force (70,000g) of DGU. With this strategy, a series of POM@m-SWCNTs of ∼1.2 nm with high purity were sorted. The mechanism supported by theoretical and experimental evidence showed that the separation of m-SWCNTs depended on not only nanotube/cluster size but also the conductivity of SWCNTs. The smallest 1.2 nm m-SWCNT that can exactly accommodate a 0.9 nm-{Mo6} cluster exhibited the maximum electron transfer to inner clusters; thus, intertube π-π stacking of such m-SWCNTs was greatly loosened, leading to the preferential dispersion into individual ones and partitioning in the uppermost layer after DGU. As a proof-of-concept application, this sorting strategy was extended to separate heavy-element 238U-encapsulated m-SWCNTs. The phase-pure, tiny (1-2.5 nm) U4O9 crystals with atomic vacancy clusters were fabricated on m-SWCNTs through growth kinetic control. This work may provide a general way to construct desired actinide materials on specific SWCNTs.

Improved Characterization of Aqueous Single-Walled Carbon Nanotube Dispersions Using Dynamic Light Scattering and Analytical Centrifuge Methods

Aqueous dispersions of single-walled carbon nanotubes (SWCNTs) with a surfactant were studied by using a combination of differential sedimentation and dynamic light scattering methods. When applied to elongated particles like SWCNTs, the differential sedimentation method makes it possible to measure their diameters in dispersions, while the dynamic light scattering method allows to measure their lengths. Both methods have logarithmic dependence on the ratio between the length and diameter of the particles, and their simultaneous use improves the accuracy of measuring particles' dimensions. It was shown that sonication of dispersions leads not only to unbundling of agglomerates into individual nanotubes but also to a decrease in their lengths and the appearance of new defects detectable in increasing the D/G ratio in the Raman spectra. Unbundling into individual nanotubes occurs after exposure to 1 kWh/L energy density, and the single nanotube diameter with SDBS is ca. 3.3 nm larger than that of the naked nanotubes. Conductivity of thin SWCNT films made out of individual nanotubes demonstrates a power law dependence with the exponent close to the theoretical one for rigid rods.

A Review on 1-D Nanomaterials: Scaling-Up with Gas-Phase Synthesis

Nanowire-like materials exhibit distinctive properties comprising optical polarisation, waveguiding, and hydrophobic channelling, amongst many other useful phenomena. Such 1-D derived anisotropy can be further enhanced by arranging many similar nanowires into a coherent matrix, known as an array superstructure. Manufacture of nanowire arrays can be scaled-up considerably through judicious use of gas-phase methods. Historically, the gas-phase approach however has been extensively used for the bulk and rapid synthesis of isotropic 0-D nanomaterials such as carbon black and silica. The primary goal of this review is to document recent developments, applications, and capabilities in gas-phase synthesis methods of nanowire arrays. Secondly, we elucidate the design and use of the gas-phase synthesis approach; and finally, remaining challenges and needs are addressed to advance this field.

Growing Carbon Nanotubes In Situ Surrounding Carbon Fiber Surface via Chemical Vapor Deposition to Reinforce Flexural Strength of Carbon Fiber Composites

This study employed novel joint treatments to strengthen the carbon fiber reinforced polymer (CFRP) composites. Vertically aligned carbon nanotubes (VACNTs) were prepared in situ on the catalyst-treated CF surface via the chemical vapor deposition (CVD) method, intertwining into three-dimensional fiber-nets and fully surrounding CF to form an integrated structure. The resin pre-coating (RPC) technique was further used to guide diluted epoxy resin (without hardener) to flow into nanoscale and submicron spaces to eliminate void defects at the root of VACNTs. Three-point bending testing results showed the "growing CNTs and RPC"-treated CFRP composites yielded the best flexural strength, a 27.1% improvement over the specimens without treatment, while the failure modes indicated that the original delamination failure was changed into "flexural failure" with through-the-thickness crack propagation. In brief, growing VACNTs and RPC on the CF surface enabled toughening of the epoxy adhesive layer, reducing potential void defects and constructing the integrated quasi-Z-directional fiber bridging at the CF/epoxy interface for stronger CFRP composites. Therefore, the joint treatments of growing VACNTs in situ via the CVD method and RPC technique are very effective and have great potential in manufacturing high-strength CFRP composites for aerospace applications.

Determine the Complete Configuration of Single-Walled Carbon Nanotubes by One Photograph of Transmission Electron Microscopy

Developing a convenient method to determine the complete structure of single-walled carbon nanotubes (SWNTs) is important to achieve the fully controlled growth of this nanomaterial. However, approaches that can identify handedness at the atomic level with simple equipment, operation, and data analysis are still lacking. Here, the SWNTs/graphene (Gr) vertical heterostructures are artificially constructed with aligned interfaces to realize the lattice interpretation of SWNT upper and lower walls separately by only one transmission electron microscopy image, thus transforming the 3D handedness information to projected 2D space. Gr displays prominent out-of-plane deformation at the interface, promoting the energetic advantage for the aligned interface construction. The interfacial alignment between the SWNT and Gr shows no obvious dependence on either the helical angle or diameter of SWNTs. The half-wrapping of SWNTs by deformed Gr also triggers diversified alterations in electronic structures based on theoretical calculations. 27 specimens with SWNTs prepared by two disparate methods are examined, implying equal handedness distribution in the randomly aligned SWNTs grown on quartz and potential handedness enrichment in horizontal SWNT arrays grown on a-sapphire. This work provides a simple strategy for chiral discrimination and lays a characterization foundation for handedness-selective growth of nanomaterials.

Self-Assembled Crystalline Bundles in Soluble Metal-Organic Nanotubes

The use of nanotubes in the solution state is crucial not only for the exploration of physical and chemical behaviors at the molecular level but also for application such as thin-film fabrication. Surface modification is generally used to solubilize carbon nanotubes (CNTs) and various synthetic nanotubes; however, this method may affect the surface properties of the original nanotubes, and the detailed crystal structure obtained after modification is unclear. Here, we report the synthesis of a crystalline and soluble metal-organic nanotube consisting of a cationic tubular framework and an anion with a long alkyl chain. The nanotubular structures are formed not only in the solid state but also in the solution state, as confirmed by an X-ray structural analysis, optical measurements, and electron microscopy studies. This nanotube system is realized in different states without any surface modification, which is quite different from typical CNTs and synthetic nanotubes. In addition, self-assembled crystalline bundles are directly observed using transmission electron microscopy (TEM) for the first time in a metal-organic nanotube system. The bundle structures are also confirmed by atomic force microscopy (AFM) observations of thin nanotube films. We envisage a systematic design of such soluble metal-organic nanotubes that will enable direct observation of mass transport behavior in channels of bundles or a single nanotube, as well as a wide range of thin-film applications.

(n, m) Distribution of Single-Walled Carbon Nanotubes Grown from a Non-Magnetic Palladium Catalyst

Non-magnetic metal nanoparticles have been previously applied for the growth of single-walled carbon nanotubes (SWNTs). However, the activation mechanisms of non-magnetic metal catalysts and chirality distribution of synthesized SWNTs remain unclear. In this work, the activation mechanisms of non-magnetic metal palladium (Pd) particles supported by the magnesia carrier and thermodynamic stabilities of nucleated SWNTs with different (n, m) are evaluated by theoretical simulations. The electronic metal-support interaction between Pd and magnesia upshifts the d-band center of Pd, which promotes the chemisorption and dissociation of carbon precursor molecules on the Pd surface, making the activation of magnesia-supported non-magnetic Pd catalysts for SWNT growth possible. To verify the theoretical results, a porous magnesia supported Pd catalyst is developed for the bulk synthesis of SWNTs by chemical vapor deposition. The chirality distribution of Pd-grown SWNTs is understood by operating both Pd-SWNT interfacial formation energy and SWNT growth kinetics. This work not only helps to gain new insights into the activation of catalysts for growing SWNTs, but also extends the use of non-magnetic metal catalysts for bulk synthesis of SWNTs.

Overview of Engineering Carbon Nanomaterials Such As Carbon Nanotubes (CNTs), Carbon Nanofibers (CNFs), Graphene and Nanodiamonds and Other Carbon Allotropes inside Porous Anodic Alumina (PAA) Templates

The fabrication and design of carbon-based hierarchical structures with tailored nano-architectures have attracted the enormous attention of the materials science community due to their exceptional chemical and physical properties. The collective control of nano-objects, in terms of their dimensionality, orientation and size, is of paramount importance to expand the implementation of carbon nanomaterials across a large variety of applications. In this context, porous anodic alumina (PAA) has become an attractive template where the pore morphologies can be straightforwardly modulated. The synthesis of diverse carbon nanomaterials can be performed using PAA templates, such as carbon nanotubes (CNTs), carbon nanofibers (CNFs), and nanodiamonds, or can act as support for other carbon allotropes such as graphene and other carbon nanoforms. However, the successful growth of carbon nanomaterials within ordered PAA templates typically requires a series of stages involving the template fabrication, nanostructure growth and finally an etching or electrode metallization steps, which all encounter different challenges towards a nanodevice fabrication. The present review article describes the advantages and challenges associated with the fabrication of carbon materials in PAA based materials and aims to give a renewed momentum to this topic within the materials science community by providing an exhaustive overview of the current synthesis approaches and the most relevant applications based on PAA/Carbon nanostructures materials. Finally, the perspective and opportunities in the field are presented.

Research Progress on Graphite-Derived Materials for Electrocatalysis in Energy Conversion and Storage

High-performance electrocatalysts are critical to support emerging electrochemical energy storage and conversion technologies. Graphite-derived materials, including fullerenes, carbon nanotubes, and graphene, have been recognized as promising electrocatalysts and electrocatalyst supports for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO₂RR). Effective modification/functionalization of graphite-derived materials can promote higher electrocatalytic activity, stability, and durability. In this review, the mechanisms and evaluation parameters for the above-outlined electrochemical reactions are introduced first. Then, we emphasize the preparation methods for graphite-derived materials and modification strategies. We further highlight the importance of the structural changes of modified graphite-derived materials on electrocatalytic activity and stability. Finally, future directions and perspectives towards new and better graphite-derived materials are presented.

Sonication-Free Dispersion of Single-Walled Carbon Nanotubes for High-Sorption-Capacity Aerogel Fabrication

Homogenously dispersing single-walled carbon nanotubes (SWNTs) in solvents has been one critical step towards exploiting their exceptional properties in high-performance components. However, the solubility of SWNTs is severely limited by the inert tube surfaces and strong tube-tube van der Waals attractions. Starting with carbon nanotubides, i.e., negatively charged SWNTs reduced by alkali metals, we herein propose a sonication-free approach to prepare an aqueous dispersion of SWNTs. The approach combines the spontaneous dissolution of nanotubides in polar aprotic solvents with polyvinylpyrrolidone wrapping and dialysis in deionized H2O, which results in well-dispersed, neutralized SWNTs. The gelation of concentrated SWNT dispersion leads to the formation of hydrogels, which is subsequently transformed into SWNT aerogels through lyophilization. The prepared SWNT aerogels exhibit high-mass-sorption capacities for organic solvent absorption, paving the way towards harvesting the extraordinary properties of SWNTs.

Growth modes of single-walled carbon nanotubes on catalysts

Understanding the growth mechanism of single-walled carbon nanotubes (SWCNTs) and achieving selective growth requires insights into the catalyst structure-function relationship. Using an in situ aberration-corrected environmental transmission electron microscope, we reveal the effects of the state and structure of catalysts on the growth modes of SWCNTs. SWCNTs grown from molten catalysts via a vapor-liquid-solid process generally present similar diameters to those of the catalysts, indicating a size correlation between nanotubes and catalysts. However, SWCNTs grown from solid catalysts via a vapor-solid-solid process always have smaller diameters than the catalysts, namely, an independent relationship between their sizes. The diameter distribution of SWCNTs grown from crystalline Co₇W₆, which has a unique atomic arrangement, is discrete. In contrast, nanotubes obtained from crystalline Co are randomly dispersed. The different growth modes are linked to the distinct chiral selectivity of SWCNTs grown on intermetallic and monometallic catalysts. These findings will enable rational design of catalysts for chirality-controlled SWCNTs growth.

Efficient Selective Sorting of Semiconducting Carbon Nanotubes Using Ultra-Narrow-Band-Gap Polymers

Conjugated polymers with narrow band gaps are particularly useful for sorting and discriminating semiconducting single-walled carbon nanotubes (s-SWCNT) due to the low charge carrier injection barrier for transport. In this paper, we report two newly synthesized narrow-band-gap conjugated polymers (PNDITEG-TVT and PNDIC8TEG-TVT) based on naphthalene diimide (NDI) and thienylennevinylene (TVT) building blocks, decorated with different polar side chains that can be used for dispersing and discriminating s-SWCNT. Compared with the mid-band-gap conjugated polymer PNDITEG-AH, which is composed of naphthalene diimide (NDI) and head-to-head bithiophene building blocks, the addition of a vinylene linker eliminates the steric congestion present in head-to-head bithiophene, which promotes backbone planarity, extending the π-conjugation length and narrowing the band gap. Cyclic voltammetry (CV) and density functional theory (DFT) calculations suggest that inserting a vinylene group in a head-to-head bithiophene efficiently lifts the highest occupied molecular orbital (HOMO) level (-5.60 eV for PNDITEG-AH, -5.02 eV for PNDITEG-TVT, and -5.09 eV for PNDIC8TEG-TVT). All three polymers are able to select for s-SWCNT, as evidenced by the sharp transitions in the absorption spectra. Field-effect transistors (FETs) fabricated with the polymer:SWCNT inks display p-dominant properties, with higher hole mobilities when using the NDI-TVT polymers as compared with PNDITEG-AH (0.6 cm² V^-1 s^-1 for HiPCO:PNDITEG-AH, 1.5 cm² V^-1 s^-1 for HiPCO:PNDITEG-TVT, and 2.3 cm² V^-1 s^-1 for HiPCO:PNDIC8TEG-TVT). This improvement is due to the better alignment of the HOMO level of PNDITEG-TVT and PNDIC8TEG-TVT with that of the dominant SWCNT specie.

Single layer aligned semiconducting single-walled carbon nanotube array with high linear density

Highly ordered semiconducting single-walled carbon nanotubes(sc-SWCNTs) array with high purity, high linear density and controllable manner is strongly desired for carbon-based integrated circuits, yet it remains a big challenge. Herein, close-packed single layered and controllably aligned sc-SWCNTs arrays were obtained through dielectrophoresis using a high purity sc-SWCNT dispersion. Under optimized condition of length and average number of interconnecting junctions across the channel full of aligned sc-SWCNTs, field effect transistors (FETs) with high performance were achieved with both a high on/off current ratio and large carrier mobility. Based on the optimized channel length, by systematically optimizing the dielectrophoresis parameters of the frequency and duration of applied AC voltage (V_pp), the highly ordered sc-SWCNTs arrays with an ultra-high linear density of 54 ± 2 tubesμm^-1showed relatively high device performance of FET. The fabrication process optimized in this report can be further extended and applied in large-area, low-cost carbon-based integrated circuits.

Polyoxometalate steric hindrance driven chirality-selective separation of subnanometer carbon nanotubes

Subnanometer single-chirality single-walled carbon nanotubes (SWCNTs) are of particular interest in multiple applications. Inspired by the interdisciplinary combination of redox active polyoxometalates and SWCNTs, here we report a cluster steric hindrance strategy by assembling polyoxometalates on the outer surface of subnanometer SWCNTs via electron transfer and demonstrate the selective separation of monochiral (6,5) SWCNTs with a diameter of 0.75 nm by a commercially available conjugated polymer. The combined use of DFT calculations, TEM, and XPS unveils the mechanism that selective separation is associated with tube diameter-dependent interactions between the tube and clusters. Sonication drives the preferential detachment of polyoxometalate clusters from small-diameter (6,5) SWCNTs, attributable to weak tube–cluster interactions, which enables the polymer wrapping and separation of the released SWCNTs, while strong binding clusters with large-diameter SWCNTs provide steric hindrance and block the polymer wrapping. The polyoxometalate-assisted modulation, which can be rationally customized, provides a universal and robust pathway for the separation of SWCNTs.

We develop a cluster steric hindrance strategy by assembling polyoxometalates on subnanometer single-walled carbon nanotubes (SWCNTs) and demonstrate the selective separation of single-chirality (6,5) SWCNTs via polymer extraction.

Carbon Nanomaterials (CNMs) and Enzymes: From Nanozymes to CNM-Enzyme Conjugates and Biodegradation

Carbon nanomaterials (CNMs) and enzymes differ significantly in terms of their physico-chemical properties—their handling and characterization require very different specialized skills. Therefore, their combination is not trivial. Numerous studies exist at the interface between these two components—especially in the area of sensing—but also involving biofuel cells, biocatalysis, and even biomedical applications including innovative therapeutic approaches and theranostics. Finally, enzymes that are capable of biodegrading CNMs have been identified, and they may play an important role in controlling the environmental fate of these structures after their use. CNMs’ widespread use has created more and more opportunities for their entry into the environment, and thus it becomes increasingly important to understand how to biodegrade them. In this concise review, we will cover the progress made in the last five years on this exciting topic, focusing on the applications, and concluding with future perspectives on research combining carbon nanomaterials and enzymes.

Enrichment of high-purity large-diameter semiconducting single-walled carbon nanotubes

Semiconducting single-walled carbon nanotubes SWCNTs (s-SWCNTs) are considered one of the most promising alternatives to traditional silicon-based semiconductors. In particular, large-diameter s-SWCNTs (>1.2 nm) exhibit more advantages over small-diameter ones in high-performance electronic applications because of their higher charge carrier mobility and reduced Schottky barrier height. Great efforts have been made to enriching large-diameter s-SWCNTs from mass-produced raw CNTs that contain both metallic SWCNTs and s-SWCNTs. Among separation technologies, the effective and scalable ones are conjugated polymer wrapping (CPW), gel permeation chromatography (GC), aqueous two-phase extraction (ATPE), and density gradient ultracentrifugation (DGU). In this review, we survey recent progress on enriching large-diameter s-SWCNTs using those methods and outline the strategies and challenges in the separation according to the electronic type and chirality of SWCNTs. Finally, we highlight some applications of the enriched large-diameter s-SWCNTs and outlook for the future of SWCNT-based electronic devices.

Selective separation of single-walled carbon nanotubes in aqueous solution by assembling redox nanoclusters

The selective separation of soluble and individual single-walled carbon nanotubes (SWCNTs) in aqueous solution is a key step for harnessing the extraordinary properties of these materials. Manipulating the strong van der Waals intertube interactions between the SWCNT bundles is very important in selective separation, which is a long-standing challenge. Here we reported the ability of redox polyoxometalate clusters to modulate the intertube π-π stacking interaction through electron transfer and achieved the diameter-selective separation of SWCNTs in a surfactant aqueous solution. The large-diameter SWCNTs concentrated at ∼1.3-1.4 nm were selectively separated when ∼1 nm clusters encapsulated within the tube cavity, and the dispersion of subnanometer ∼0.7-0.9 nm SWCNTs was boosted when clusters were adsorbed on the outer surface of small-diameter nanotubes. The mechanism of diameter-selective separation of SWCNTs associated with the size-dependent interaction between cluster-tubes and the steric hindrance effect of clusters was revealed by optical absorption and Raman spectroscopy. This simple method thus enables the selective separation of individual high-quality SWCNTs in aqueous solutions without harsh sonication with the potential for other separation applications.

Dip-Coating Self-Assembly Fabrication and Polarization Sensitive Photoresponse of Aligned Single-Walled Carbon Nanotube Film

It is challenging to obtain wafer-scaled aligned films for completely exploiting the promising properties of semiconducting single-walled carbon nanotubes (s-SWCNTs). Aligned s-SWCNTs with a large area can be obtained by combining water evaporation and slow withdrawal-induced self-assembly in a dip-coating process. Moreover, the tunability of deposition morphology parameters such as stripe width and spacing is examined. The polarized Raman results show that s-SWCNTs can be aligned in ±8.6°. The derived two terminal photodetector shows both a high negative responsivity of 41 A/W at 520 nm and high polarization sensitivity. Our results indicate that aligned films with a large area may be useful to electronics- and optoelectronics-related applications.

Advances and Frontiers in Single-Walled Carbon Nanotube Electronics

Single-walled carbon nanotubes (SWCNTs) have been considered as one of the most promising electronic materials for the next-generation electronics in the more Moore era. Sub-10 nm SWCNT-field effect transistors (FETs) have been realized with several performances exceeding those of Si-based FETs at the same feature size. Several industrial initiatives have attempted to implement SWCNT electronics in integrated circuit (IC) chips. Here, the recent advances in SWCNT electronics are reviewed from in-depth understanding of the fundamental electronic structures, the carrier transport mechanisms, and the metal/SWCNT contact properties. In particular, the subthreshold switching properties are highlighted for low-power, energy-efficient device operations. State-of-the-art low-power SWCNT-based electronics and the key strategies to realize low-voltage and low-power operations are outlined. Finally, the essential challenges and prospects from the material preparation, device fabrication, and large-scale ICs integration for future SWCNT-based electronics are foregrounded.

Building a Bridge for Carbon Nanotubes from Nanoscale Structure to Macroscopic Application

Through 30 years of research, researchers have gained a deep understanding of the synthesis, characteristics, and applications of carbon nanotubes (CNTs). However, up to now, there are still few industries using CNT as the leading material. The difficulty of CNTs to be applied in industry is the gap between the properties of CNT-based aggregates and those of a single carbon nanotube. Therefore, how to maintain the intrinsic properties of CNTs when they are assembled into aggregates is of great significance. Herein, we summarize and analyze the research status of CNT materials applied in different fields from proven techniques to potential industries, including energy storage, electronics, mechanical and other applications. For each application, the intrinsic properties of CNTs and the real performances of their aggregates are compared to figure out the key problems in CNT synthesis. Finally, we give an outlook for building a bridge for CNTs from nanoscale structure to macroscopic application, giving inspiration to researchers making efforts toward the real application of carbon nanotubes.

Complete structural characterization of single carbon nanotubes by Rayleigh scattering circular dichroism

Non-invasive, high-throughput spectroscopic techniques can identify chiral indices (n,m) of carbon nanotubes down to the single-tube level^1-6. Yet, for complete characterization and to unlock full functionality, the handedness, the structural property associated with mirror symmetry breaking, also needs to be identified accurately and efficiently^7-14. So far, optical methods fail in the handedness characterization of single nanotubes because of the extremely weak chiroptical signals (roughly 10^-7) compared with the excitation light^15,16. Here we demonstrate the complete structure identification of single nanotubes in terms of both chiral indices and handedness by Rayleigh scattering circular dichroism. Our method is based on the background-free feature of Rayleigh scattering collected at an oblique angle, which enhances the nanotube's chiroptical signal by three to four orders of magnitude compared with conventional absorption circular dichroism. We measured a total of 30 single-walled carbon nanotubes including both semiconducting and metallic nanotubes and found that their absolute chiroptical signals show a distinct structure dependence, which can be qualitatively understood through tight-binding calculations. Our strategy enables the exploration of handedness-related functionality of single nanotubes and provides a facile platform for chiral discrimination and chiral device exploration at the level of individual nanomaterials.

Host-Guest Molecular Interaction Enabled Separation of Large-Diameter Semiconducting Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (s-SWCNTs) with a diameter of around 1.0-1.5 nm, which present bandgaps comparable to silicon, are highly desired for electronic applications. Therefore, the preparation of s-SWCNTs of such diameters has been attracting great attention. The inner surface of SWCNTs has a suitable curvature and large contacting area, which is attractive in host-guest chemistry triggered by electron transfer. Here we reported a strategy of host-guest molecular interaction between SWCNTs and inner clusters with designed size, thus selectively separating s-SWCNTs of expected diameters. When polyoxometalate clusters of ∼1 nm in size were filled in the inner cavities of SWCNTs, s-SWCNTs with diameters concentrated at ∼1.3-1.4 nm were selectively extracted with the purity of ∼98% by a commercially available polyfluorene derivative. The field-effect transistors built from the sorted s-SWCNTs showed a typical behavior of semiconductors. The sorting mechanisms associated with size-dependent electron transfer from nanotubes to inner polyoxometalate were revealed by the spectroscopic and in situ electron microscopic evidence as well as the theoretical calculation. The polyoxometalates with designable size and redox property enable the flexible regulation of interaction between the nanotubes and the clusters, thus tuning the diameter of sorted s-SWCNTs. The present sorting strategy is simple and should be generally feasible in other SWCNT sorting techniques, bringing both great easiness in dispersant design and improved selectivity.

Self-Assembling Peptides and Carbon Nanomaterials Join Forces for Innovative Biomedical Applications

Self-assembling peptides and carbon nanomaterials have attracted great interest for their respective potential to bring innovation in the biomedical field. Combination of these two types of building blocks is not trivial in light of their very different physico-chemical properties, yet great progress has been made over the years at the interface between these two research areas. This concise review will analyze the latest developments at the forefront of research that combines self-assembling peptides with carbon nanostructures for biological use. Applications span from tissue regeneration, to biosensing and imaging, and bioelectronics.