Chemi- and Bioluminescence of Cyclic Peroxides

A novel dual-activatable ultrasensitive chemiluminescent probe for mercury (II) monitoring: From rational design to multiple application

Real-time optical sensing of mercury has been developed rapidly in recent years but remains challenging such as bearing background interference. Herein, a Hg2+ and base dual-activatable ultrasensitive chemiluminescent probe CL-Hg based on benzothiazole-phenoxyl-dioxetane with profits of excitation light-free and minimal interference is presented. The photophysical properties study and sensing performance verified CL-Hg is coupled with unique advantages of long-term detection (more than 400 min), ultrahigh sensitivity (LOD = 0.52 nM), and high specificity to Hg2+, and visualization detection by the paper-based test strips. More importantly, CL-Hg showed the qualitative and quantitative detection capability for Hg2+ with great recyclability in real samples of water, seafood, and beverages, holding great potential for on-site monitoring of Hg2+ levels in the actual samples. To our knowledge, this is the first work achieving the detection of Hg2+ by chemiluminescence. Overall, the Hg2+-activated visualization platform offers a practical method for detecting Hg2+ in various application scenarios.

Mechanistic Investigation into Chemiluminescence from 1,4-Benzoquinone

Tetrahalogen-1,4-benzoquinone (THBQ) represents a category of H2O2-dependent substrates for chemiluminescence (CL), including tetrafluoro-, tetrachloro-, tetrabromo-, and tetraiodo-1,4-benzoquinone (TFBQ, TCBQ, TBBQ, and TIBQ). A deep understanding of the CL mechanism of THBQ is essential for all H2O2-dependent CL and even some bioluminescence. This article systematically investigates the CL process of THBQ by density functional theory and multireference state theory. The theoretical results confirm the generality of the CL mechanism previously proposed in studies on TCBQ and TBBQ. The dissociation steps producing the emitter of light from dihalogenquinone dioxetane (DHD) and its anion (DHD-), formed by the oxidation of THBQ, were carefully considered. Findings show that the dissociation of DHD/DHD- follows the entropy trap/gradually reversible charge-transfer-induced luminescence (GRCTIL) mechanisms. The dissociation of DHD- is kinetically more advantageous compared with that of DHD. At the practical experimental pH value, the decrease in the electron-withdrawing inductive effect from F to I substituents results in the decrease in the proportions of easily dissociated DHD-, and the increase in the heavy-atom effect from F to I substituents leads to the increase in the phosphorescence emission. These combined factors successively decrease the CL intensity from TFBQ to TCBQ, TBBQ, and TIBQ. The conclusions are verified by the previous experiments on TCBQ and TBBQ, and they are expected to be confirmed by future experiments on TFBQ and TIBQ.

Sonosynthetic Cyanobacteria Oxygenation for Self-Enhanced Tumor-Specific Treatment

Photosynthesis, essential for life on earth, sustains diverse processes by providing nutrition in plants and microorganisms. Especially, photosynthesis is increasingly applied in disease treatments, but its efficacy is substantially limited by the well-known low penetration depth of external light. Here, ultrasound-mediated photosynthesis is reported for enhanced sonodynamic tumor therapy using organic sonoafterglow (ultrasound-induced afterglow) nanoparticles combined with cyanobacteria, demonstrating the proof-of-concept sonosynthesis (sonoafterglow-induced photosynthesis) in cancer therapy. Chlorin e6, a typical small-molecule chlorine, is formulated into nanoparticles to stimulate cyanobacteria for sonosynthesis, which serves three roles, i.e., overcoming the tissue-penetration limitations of external light sources, reducing hypoxia, and acting as a sonosensitizer for in vivo tumor suppression. Furthermore, sonosynthetic oxygenation suppresses the expression of hypoxia-inducible factor 1α, leading to reduced stability of downstream SLC7A11 mRNA, which results in glutathione depletion and inactivation of glutathione peroxidase 4, thereby inducing ferroptosis of cancer cells. This study not only broadens the scope of microbial nanomedicine but also offers a distinct direction for sonosynthesis.

Plasmalogen oxidation induces the generation of excited molecules and electrophilic lipid species

Plasmalogens are glycerophospholipids with a vinyl ether linkage at the sn-1 position of the glycerol backbone. Despite being suggested as antioxidants due to the high reactivity of their vinyl ether groups with reactive oxygen species, our study reveals the generation of subsequent reactive oxygen and electrophilic lipid species from oxidized plasmalogen intermediates. By conducting a comprehensive analysis of the oxidation products by liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS), we demonstrate that singlet molecular oxygen [O2 (1Δg)] reacts with the vinyl ether bond, producing hydroperoxyacetal as a major primary product (97%) together with minor quantities of dioxetane (3%). Furthermore, we show that these primary oxidized intermediates are capable of further generating reactive species including excited triplet carbonyls and O2 (1Δg) as well as electrophilic phospholipid and fatty aldehyde species as secondary reaction products. The generation of excited triplet carbonyls from dioxetane thermal decomposition was confirmed by light emission measurements in the visible region using dibromoanthracene as a triplet enhancer. Moreover, O2 (1Δg) generation from dioxetane and hydroperoxyacetal was evidenced by detection of near-infrared light emission at 1,270 nm and chemical trapping experiments. Additionally, we have thoroughly characterized alpha-beta unsaturated phospholipid and fatty aldehydes by LC-HRMS analysis using two probes that specifically react with aldehydes and alpha-beta unsaturated carbonyls. Overall, our findings demonstrate the generation of excited molecules and electrophilic lipid species from oxidized plasmalogen species unveiling the potential prooxidant nature of plasmalogen-oxidized products.

Organocatalyzed Photoelectrochemistry for the Generation of Acyl and Phosphoryl Radicals through Hydrogen Atom-Transfer Process

An organocatalyzed photoelectrochemical method for the generation of acyl and phosphoryl radicals from formamides, aldehydes, and phosphine oxides has been developed. This protocol utilizes 9,10-phenanthrenequinone (PQ) as both a molecular catalyst and a hydrogen atom-transfer (HAT) reagent, eliminating the requirement for external metal-based reagents, HAT reagents, and oxidants. The generated acyl radicals can be applied to a range of radical-mediated transformation reactions, including C-H carbamoylation of heteroarenes, intermolecular tandem radical cyclization of CF3-substituted N-arylacrylamides, as well as intramolecular cyclization reactions. The use of acyl radicals in these transformations offers an efficient and sustainable approach to accessing structurally diverse carbonyl compounds.

Bioluminescence - The Vibrant Glow of Nature and its Chemical Mechanisms

Bioluminescence, the mesmerizing natural phenomenon where living organisms produce light through chemical reactions, has long captivated scientists and laypersons alike, offering a rich tapestry of insights into biological function, ecology, evolution as well as the underlying chemistry. This comprehensive introductory review systematically explores the phenomenon of bioluminescence, addressing its historical context, geographic dispersion, and ecological significance with a focus on their chemical mechanisms. Our examination begins with terrestrial bioluminescence, discussing organisms from different habitats. We analyze thefireflies of Central Europe's meadows and the fungi in the Atlantic rainforest of Brazil. Additionally, we inspect bioluminescent species in New Zealand, specifically river-dwelling snails and mosquito larvae found in Waitomo Caves. Our exploration concludes in the Siberian Steppes, highlighting the area's luminescent insects and annelids. Transitioning to the marine realm, the second part of this review examines marine bioluminescent organisms. We explore this phenomenon in deep-sea jellyfish and their role in the ecosystem. We then move to Toyama Bay, Japan, where seasonal bioluminescence of dinoflagellates and ostracods present a unique case study. We also delve into the bacterial world, discussing how bioluminescent bacteria contribute to symbiotic relationships. For each organism, we contextualize its bioluminescence, providing details about its discovery, ecological function, and geographical distribution. A special focus lies on the examination of the underlying chemical mechanisms that enables these biological light displays. Concluding this review, we present a series of practical bioluminescence and chemiluminescence experiments, providing a resource for educational demonstrations and student research projects. Our goal with this review is to provide a summary of bioluminescence across the diverse ecological contexts, contributing to the broader understanding of this unique biological phenomenon and its chemical mechanisms serving researchers new to the field, educators and students alike.

Mechanistic Insights into the Bacterial Luciferase-based Bioluminescence Resonance Energy Transfer Luminescence: The Role of Protein Complex Dimer

Bacterial bioluminescence holds significant potential in the realm of optical imaging due to the inherent advantages of bioluminescence and ease of operation. However, its practical utility is hindered by its low light intensity. The fusion of bacterial luciferase with a highly fluorescent protein has been demonstrated to significantly enhance autonomous luminescence. Nevertheless, the underlying mechanism behind this enhancement remains unclear, and there is a dearth of research investigating the mechanistic aspects of bioluminescence resonance energy transfer (BRET) luminescence, whether it occurs naturally or can be achieved through experimental means. In this study, we investigated the phenomenon of bacterial luciferase-based BRET luminescence employing a range of computational techniques, including structural modeling, molecular docking, molecular dynamics simulations, as well as combined quantum mechanics and molecular mechanics calculations. The theoretical findings suggest that the BRET luminescence occurs through resonance energy transfer between the excited bioluminophore and the ground chromophore within the protein complex dimer. The proposed mechanism of the protein complex dimer offers a microscopic understanding of the intriguing BRET phenomenon and has the potential to inspire further practical applications in the field of optical imaging.

Molybdenum disulfide nanosheet induced reactive oxygen species for high-efficiency luminol chemiluminescence

BACKGROUND

Luminol chemiluminescence (CL) sensing system remains an excellent candidate for application in bioanalysis due to its good water solubility. However, traditional luminol CL system usually requires the addition of oxidizing agents and sensitizers to obtain high efficiency for the improvement of detection sensitivity. Although numerous studies on the nanomaterial-enhanced luminol CL systems have been carried out, there is still great potential to develop inexpensive, readily available and easily handled catalysts to construct simple and effective CL platform for biomolecular sensing.

RESULTS

Few-layered MoS2 nanosheets (NS) prepared by sonication-assisted exfoliation of commercially available bulk MoS2 were found to significantly enhance the CL of luminol‒dissolved oxygen in the absence of additional oxidants. The mechanism study demonstrated that exfoliated MoS2 NS could catalyze the decomposition of dissolved oxygen by virtue of its exposed active sites on the surface, generating increased reactive oxygen intermediates, which then oxidize luminol and produce intense CL emission. The proposed high-efficiency luminol CL system was then employed for the extremely sensitive identification of dopamine based on the quenching of CL by dopamine. The limit of detection (LOD) for dopamine can be as low as 2.07 nM. Besides, it also works well in the actual urine sample with good recoveries (99.6-100.6 %), confirming the practicability of the method.

SIGNIFICANCE

As a new type of CL catalyst, MoS2 NS developed in this work are easy to obtain, simple to prepare and can be produced in large quantities, which lays a foundation for extending applicability of MoS2 NS in the CL field, and provides a new idea for developing simple and highly sensitive CL sensing system.

Nanomaterials for light-mediated therapeutics in deep tissue

Light-mediated therapeutics, including photodynamic therapy, photothermal therapy and light-triggered drug delivery, have been widely studied due to their high specificity and effective therapy. However, conventional light-mediated therapies usually depend on the activation of light-sensitive molecules with UV or visible light, which have poor penetration in biological tissues. Over the past decade, efforts have been made to engineer nanosystems that can generate luminescence through excitation with near-infrared (NIR) light, ultrasound or X-ray. Certain nanosystems can even carry out light-mediated therapy through chemiluminescence, eliminating the need for external activation. Compared to UV or visible light, these 4 excitation modes penetrate more deeply into biological tissues, triggering light-mediated therapy in deeper tissues. In this review, we systematically report the design and mechanisms of different luminescent nanosystems excited by the 4 excitation sources, methods to enhance the generated luminescence, and recent applications of such nanosystems in deep tissue light-mediated therapeutics.

A Self-Sustaining Near-Infrared Afterglow Chemiluminophore for High-Contrast Activatable Imaging

Afterglow imaging holds great promise for ultrasensitive bioimaging due to its elimination of autofluorescence. Self-sustaining afterglow molecules (SAMs), which enable all-in-one photon sensitization, chemical defect formation and afterglow generation, possess a simplified, reproducible, and efficient superiority over commonly used multi-component systems. However, there is a lack of SAMs, particularly those with much brighter near-infrared (NIR) emission and structural flexibility for building high-contrast activatable imaging probes. To address these issues, this study for the first time reports a methylene blue derivative-based self-sustaining afterglow agent (SAN-M) with brighter NIR afterglow chemiluminescence peaking at 710 nm. By leveraging the structural flexibility and tunability, an activatable nanoprobe (SAN-MO) is customized for simultaneously activatable fluoro-photoacoustic and afterglow imaging of peroxynitrite (ONOO- ), notably with a superior activation ratio of 4523 in the afterglow mode, which is at least an order of magnitude higher than other reported activatable afterglow systems. By virtue of the elimination of autofluorescence and ultrahigh activation contrast, SAN-MO enables early monitoring of the LPS-induced acute inflammatory response within 30 min upon LPS stimulation and precise image-guided resection of tiny metastatic tumors, which is unattainable for fluorescence imaging.

Comparative investigation into the anticancer activity of analogs of marine coelenterazine and coelenteramine

Cancer is still one of the most challenging diseases to treat, making the pursuit for novel molecules with potential anticancer activity an important research topic. Herein, we have performed a comparative investigation into the anticancer activity of analogs of marine coelenterazine and coelenteramine. The former is a well-known bioluminescent substrate, while the latter is a metabolic product of the resulting bioluminescent reaction. While both types of analogs showed anticancer activity toward lung and gastric cancer cell lines, we have obtained data that highlight relevant differences between the activity of these two types of compounds. More specifically, we observed relevant differences in structure-activity relationships between these types of compounds. Also, coelenteramine analogs showed time-dependent activity, while coelenterazine-based compounds usually present time-independent activity. Coelenterazine analogs also appear to be relatively safer toward noncancer cells than coelenteramine analogs. There was also seen a correlation between the activity of the coelenterazine-based compounds and their light-emission properties. Thus, these results further indicate the potential of the marine coelenterazine chemi-/bioluminescent system as a source of new molecules with anticancer activity, while providing more insight into their modes of action.

Bioluminescence of (R)-Cypridina Luciferin with Cypridina Luciferase

Cypridina luciferin (CypL) is a marine natural product that functions as the luminous substrate for the enzyme Cypridina luciferase (CypLase). CypL has two enantiomers, (R)- and (S)-CypL, due to its one chiral center at the sec-butyl moiety. Previous studies reported that (S)-CypL or racemic CypL with CypLase produced light, but the luminescence of (R)-CypL with CypLase has not been investigated. Here, we examined the luminescence of (R)-CypL, which had undergone chiral separation from the enantiomeric mixture, with a recombinant CypLase. Our luminescence measurements demonstrated that (R)-CypL with CypLase produced light, indicating that (R)-CypL must be considered as the luminous substrate for CypLase, as in the case of (S)-CypL, rather than a competitive inhibitor for CypLase. Additionally, we found that the maximum luminescence intensity from the reaction of (R)-CypL with CypLase was approximately 10 fold lower than that of (S)-CypL with CypLase, but our kinetic analysis of CypLase showed that the Km value of CypLase for (R)-CypL was approximately 3 fold lower than that for (S)-CypL. Furthermore, the chiral high-performance liquid chromatography (HPLC) analysis of the reaction mixture of racemic CypL with CypLase showed that (R)-CypL was consumed more slowly than (S)-CypL. These results indicate that the turnover rate of CypLase for (R)-CypL was lower than that for (S)-CypL, which caused the less efficient luminescence of (R)-CypL with CypLase.

Antiradical capacity assay for hydrophobic substances using hemin-catalyzed luminol chemiluminescence in cationic micelles

Antioxidant substances which can diminish the steady-state concentration of free radicals in vivo are important in the human dietary to diminish the deleterious effects of oxidative stress. As the potential of certain substances as antioxidants is difficult to be verified in vivo, simple chemical in vitro assays which test the potential of substances as antioxidants are of great importance for the screening of new antioxidants. These assays measure the capacity of a substance to suppress free radicals. We describe here an antiradical capacity assay, based on luminol chemiluminescence, in cationic micellar medium, allowing the capacity determination of hydrophobic compounds. The antiradical capacity of antioxidants is determined using the Trolox standard by the measurement of the light emission inhibition area caused by the addition of different antiradical concentrations. The obtained results are compared to the values determined using the scavenging of stable free radicals be the substances and shown to be similar for compounds like uric acid, rutin, and quercetin. However, for vitamin E, the luminol assay results in a considerably higher antiradical capacity than the assay with a stable free radical, which is rationalized by the higher reactivity of the radical generated in the luminol assay and a specific localization of vitamin E in the micellar medium.

Dissociation Time, Quantum Yield, and Dynamic Reaction Pathways in the Thermolysis of trans-3,4-Dimethyl-1,2-dioxetane

The thermolysis of trans-3,4-dimethyl-1,2-dioxetane is studied by trajectory surface hopping. The significant difference between long and short dissociation times is rationalized by frustrated dissociations and the time spent in triplet states. If the C-C bond breaks through an excited state channel, then the trajectory passes over a ridge of the potential energy surface of that state. The calculated triplet quantum yields match the experimental results. The dissociation half-times and quantum yields follow the same ascending order as per the product states, justifying the conjecture that the longer dissociation time leads to a higher quantum yield, proposed in the context of the methylation effect. The populations of the molecular Coulomb Hamiltonian and diagonal states reach equilibrium, but the triplet populations with different Sz components fluctuate indefinitely. Certain initial velocities, leading the trajectories to given product states, can be identified as the most characteristic features for sorting trajectories according to their product states.

Investigation of the Chemiluminescent Reaction of a Fluorinated Analog of Marine Coelenterazine

Bioluminescence (BL) and chemiluminescence (CL) are remarkable processes in which light is emitted due to (bio)chemical reactions. These reactions have attracted significant attention for various applications, such as biosensing, bioimaging, and biomedicine. Some of the most relevant and well-studied BL/CL systems are that of marine imidazopyrazine-based compounds, among which Coelenterazine is a prime example. Understanding the mechanisms behind efficient chemiexcitation is essential for the optimization and development of practical applications for these systems. Here, the CL of a fluorinated Coelenterazine analog was studied using experimental and theoretical approaches to obtain insight into these processes. Experimental analysis revealed that CL is more efficient under basic conditions than under acidic ones, which could be attributed to the higher relative chemiexcitation efficiency of an anionic dioxetanone intermediate over a corresponding neutral species. However, theoretical calculations indicated that the reactions of both species are similarly associated with both electron and charge transfer processes, which are typically used to explain efficiency chemiexcitation. So, neither process appears to be able to explain the relative chemiexcitation efficiencies observed. In conclusion, this study provides further insight into the mechanisms behind the chemiexcitation of imidazopyrazinone-based systems.

Formation of free acetaldehydes derived from lipid peroxidation in U937 monocyte-like cells

Acetaldehyde can be found in human cells as a byproduct of various metabolic pathways, including oxidative processes such as lipid peroxidation. This secondary product of lipid peroxidation plays a role in various pathological processes, leading to various types of civilization diseases. In this study, the formation of free acetaldehyde induced by oxygen-centred radicals was studied in monocyte-like cell line U937. Exposure of U937 cells to peroxyl/alkoxyl radicals induced by azocompound resulted in the formation of free acetaldehyde. Acetaldehyde is formed by the cleavage of fatty acids, which represents the breakdown of fatty acids into smaller fragments initiated by the cyclization of lipid peroxyl radical and β-scission of lipid alkoxyl radical. The cleavage of fatty acids alters the integrity of the plasma and nuclear membrane, leading to the loss of cell viability. Understanding the pathological processes of acetaldehyde formation is an active area of research with potential implications for preventing and treating various diseases associated with oxidative stress.

Spirostrain-Accelerated Chemiexcitation of Dioxetanes Yields Unprecedented Detection Sensitivity in Chemiluminescence Bioassays

Chemiluminescence is a fascinating phenomenon that involves the generation of light through chemical reactions. The light emission from adamantyl-phenoxy-1,2-dioxetanes can glow from minutes to hours depending on the specific substituent present on the dioxetane molecule. In order to improve the light emission properties produced by these chemiluminescent luminophores, it is necessary to induce the chemiexcitation rate to a flash mode, wherein the bulk of light is emitted instantly rather than slowly over time. We report the realization of this goal through the incorporation of spirostrain release into the decomposition of 1,2-dioxetane luminophores. DFT computational simulations provided support for the hypothesis that the spiro-cyclobutyl substituent accelerates chemiexcitation as compared to the unstrained adamantyl substituent. Spiro-linking of cyclobutane and oxetane units led to greater than 100-fold and 1000-fold emission enhancement, respectively. This accelerated chemiexcitation rate increases the detection sensitivity for known chemiluminescent probes to the highest signal-to-noise ratio documented to date. A turn-ON probe, containing a spiro-cyclobutyl unit, for detecting the enzyme β-galactosidase exhibited a limit of detection value that is 125-fold more sensitive than that for the previously described adamantyl analogue. This probe was also able to instantly detect and image β-gal activity with enhanced sensitivity in E. coli bacterial assays.

Boosting Photon Emission from the Chemiluminescence of Luminol Based on Host-Guest Recognition for the Determination of Dopamine

Modulating the photon emission of the luminophore for boosting chemiluminescence (CL) response is very crucial for the construction of highly sensitive sensors via the introduction of functionalized materials. Herein, the integration of the emitter and coreactant accelerator into one entity is realized by simply assembling cucurbit[7]uril (CB[7]) on the surface of gold nanoparticles (AuNPs) through simple assembly via a Au-O bond. The loaded CB[7] on the AuNPs improves their catalytic capacity for the generation of hydroxyl radicals(•OH). Moreover, the host-guest recognition interaction between luminol and CB[7] enables the capture of luminol on AuNPs efficiently. Also, the intramolecular electron-transfer reaction between the luminol and •OH enables the CL response more effectively in the entity, which greatly boosts photon emission ca 100 folds compared with the individual luminol/H2O2. The host-guest recognition between luminol and CB[7] is revealed by Fourier transform infrared spectroscopy, electrochemical, and thermogravimetric characterization. Moreover, the proposed CL system is successfully used for the sensitive and selective determination of dopamine (DA) based on a synergistic quenching mechanism including the competition quenching and radical-scavenging effect from DA. The present amplified strategy by integrating recognized and amplified elements within one entity simplifies the sensing process and holds great potential for sensitive analysis based on the self-enhanced strategies.

Ligation-Based High-Performance Mimetic Enzyme Sensing Platform for Nucleic Acid Detection

G-quadruplex (G4)/hemin DNAzyme is a promising candidate to substitute horseradish peroxidase in biosensing systems, especially for the detection of nucleic acids. However, the relatively suboptimal catalytic capacity limits its potential applications. This makes it imperative to develop an ideal signal for the construction of highly sensitive biosensing platforms. Herein, we integrated a novel chimeric peptide-DNAzyme (CPDzyme) with the ligase chain reaction (LCR) for the cost-efficient and highly sensitive detection of nucleic acids. By employing microRNA (miRNA) and single-nucleotide polymorphism detection as the model, we designed a G4-forming sequence on the LCR probe with a terminally labeled amino group. Subsequently, asymmetric hemin with carboxylic arms allowed assembly with the LCR products and peptide to form CPDzyme, followed by the magnetic separation of the extraneous components and chemiluminescence detection. Compared with the conventional G4/hemin signaling-based method, the LCR-CPDzyme system demonstrated 3 orders of magnitude improved sensitivity, with accurate quantification of as low as 25 aM miRNA and differentiation of 0.1% of mutant DNA from the pool containing a large amount of wild-type DNA. The proposed LCR-CPDzyme strategy is a potentially powerful method for in vitro diagnostics and serves as a reference for the development of other ligation- or hybridization-based nucleic acid amplification assays.

Chemiluminescence of a Firefly Luciferin Analogue Reveals that Formation of the Key Intermediate Responsible for Excited State Generation Occurs on a Fully Concerted Step

The chemiluminescence (CL) reaction of eight different 2-(4-hydroxyphenyl)-4,5-dihydrothiazole-4-carboxylate esters with an organic superbase and oxygen was investigated through a kinetic and computational study. These esters are all analogues to the luciferin substrate involved in efficient firefly bioluminescence. The kinetic data obtained from CL emission and light absorption assays were used in the context of linear free energy relationships (LFER); we obtained the Hammett reaction constant ρ = +1.62 ± 0.09 and the Brønsted constant βlg = -0.39 ± 0.04. These observations from LFER, together with activation parameters obtained from Arrhenius plots, suggest that the formation of the high-energy intermediate (HEI) 1,2-dioxetanone occurs via a concerted mechanism during the rate-determining step of the reaction. Calculations performed using density functional theory support a late transition state for HEI formation within the reaction mechanism pathway, which was described considering geometric parameters, Wiberg bond indices from natural bond order analysis, and the atomic charges derived from the electrostatic potential.

Quantification strategy of absolute chemiluminescence efficiency for systems of luminol with hydrogen peroxide

An important feature to be determined in mechanistic studies on chemiluminescence (CL) is its quantum efficiency, which can give significant chemical reaction information on the influence of the reactant structures and reaction conditions. However, most of the previous quantitative measurements of luminescence and quantum efficiencies are complex and incomplete. To overcome the inconvenience and underestimated quantum efficiency in each measurement, we report a simple and highly effective strategy to determine the absolute CL quantum efficiencies for three systems of luminol with hydrogen peroxide by means of a spectrometer along with an integrating sphere. The integrating sphere facilitated collection of all the emitted light and then transferred it to the spectrometer via an optical fiber proportionally. The CL quantum efficiency was determined by taking the ratio of total photons generated in the reaction system to the number of the limiting reactant molecules consumed. Absolute CL efficiencies of three luminol-H2O2 reaction systems with varied reactant concentrations or coreactants were found to be 37 %, 7.0 % and 6.6 % in a time course, which are much higher than those previously reported values of 1.0-1.3 %. Due to our complete photon collection design, a higher absolute CL efficiency can be realized. Furthermore, spooling CL spectra also provided a powerful visualization tool to observe the real-time CL evolution and devolution, allowing the study on kinetics of CL reaction systems. The above investigations are anticipated to promote further development of CL methodologies and their applications.

Chemical Mechanism of Fireworm Bioluminescence - A Theoretical Proposition

Odontosyllis undecimdonta is a marine worm, commonly known as a fireworm, that exhibits bluish-green bioluminescence (BL). The luciferin (L) and oxyluciferin (OL) during fireworm BL have been experimentally identified in vitro. The L and OL are the respective starting point and ending point of a series of complicated chemical reactions in the BL. However, the chemical mechanism of the fireworm BL remains largely unknown. Before the experiments provided strong evidence for the mechanism, based on our previously successful studies on several bioluminescent systems, we theoretically proposed the chemical mechanism of the fireworm BL in this article. By means of the spin-flip and time-dependent density functional calculations, we clearly described the complete process from L to OL: under the catalysis of luciferase, L undergoes deprotonation and reacts with 3O2 to form a dioxetanone anion via the single-electron transfer mechanism; the dioxetanone anion decomposes into the OL at the first singlet excited state (S1) by the gradually reversible charge-transfer-induced luminescence mechanism; and the S1-OL emits light and deexcites to OL in the ground state.

Cavity-Modified Chemiluminescent Reaction of Dioxetane

Chemiluminescence is a thermally activated chemical process that emits a photon of light by forming a fraction of products in the electronic excited state. A well-known example of this spectacular phenomenon is the emission of light in the firefly beetle, where the formation of a four-membered cyclic peroxide compound and subsequent dissociation produce a light-emitting product. The smallest cyclic peroxide, dioxetane, also exhibits chemiluminescence but with a low quantum yield as compared to that of firefly dioxetane. Employing the strong light-matter coupling has recently been found to be an alternative strategy to modify the chemical reactivity. In the presence of an optical cavity, the molecular degrees of freedom greatly mix with the cavity mode to form hybrid cavity-matter states called polaritons. These newly generated hybrid light-matter states manipulate the potential energy surfaces and significantly change the reaction dynamics. Here, we theoretically investigate the effects of a strong light-matter interaction on the chemiluminescent reaction of dioxetane using the extended Jaynes-Cummings model. The cavity couplings corresponding to the electronic and vibrational degrees of freedom have been included in the interaction Hamiltonian. We explore how the cavity alters the ground- and excited-state path energy barriers and reaction rates. Our results demonstrate that the formation of excited-state products in the dioxetane decomposition process can be either accelerated or suppressed, depending on the molecular orientation with respect to the cavity polarization.

Two-dimensional metal-organic framework catalyzed chemiluminescent reaction for alpha-glucosidase inhibitor screening

α-Glucosidase inhibitors (AGIs) are oral antidiabetic drugs used in the treatment of type Ⅱ diabetes. It is integral to establish methods for AGIs screening. For the detection of α-glucosidase (α-Glu) activity and screening of AGIs, a chemiluminescence (CL) platform was established based on cascade enzymatic reactions. Firstly, the catalytic activity of a two-dimensional (2D) metal-organic framework (MOF) with iron as central metal atoms and 1,3,5-benzene tricarboxylic acid as a ligand (denoted as 2D Fe-BTC) in the luminol-hydrogen peroxide (H2O2) CL reaction were studied. Mechanism studies showed that the Fe-BTC may react with H2O2 to produce ·OH and act as catalase to facilitate the decomposition of H2O2 to produce O2, thus showing good catalytic activity in the luminol-H2O2 CL reaction. The proposed luminol-H2O2-Fe-BTC CL system exhibited an outstanding response to glucose with the aid of glucose oxidase (GOx). The luminol-GOx-Fe-BTC system showed a detection linear range from 50 nM to 10 μM with a detection limit (LOD) of 3.62 nM for glucose detection. Then, the luminol-H2O2-Fe-BTC CL system was applied to the detection of α-glucosidase (α-Glu) activity and screening of AGIs based on cascade enzymatic reactions using acarbose and voglibose as model drugs. The IC50 of acarbose and voglibose was 7.39 μM and 1.89 mM, respectively.

Biological Auto(chemi)luminescence Imaging of Oxidative Processes in Human Skin

Oxidative processes in all types of organisms cause the chemical formation of electronically excited species, with subsequent ultraweak photon emission termed biological auto(chemi)luminescence (BAL). Imaging this luminescence phenomenon using ultrasensitive devices could potentially enable monitoring of oxidative stress in optically accessible areas of the human body, such as skin. Although oxidative stress induced by UV light has been explored, for chemically induced stress, there is no in vivo-quantified imaging of oxidative processes in human skin using BAL under the controlled extent of oxidative stress conditions. Furthermore, the mechanisms and dynamics of BAL from the skin have not been fully explored. Here, we demonstrate that different degrees of chemically induced oxidative stress on the skin can be spatially resolved quantitatively through noninvasive label-free BAL imaging. Additionally, to gain insight into the underlying mechanisms, a minimal chemical model of skin based on a mixture of lipid, melanin, and water was developed and used to show that it can be used to reproduce essential features of the response of real skin to oxidative stress. Our results contribute to novel, noninvasive photonic label-free methods for quantitative sensing of oxidative processes and oxidative stress.

Circularly polarized chemiluminescence from planar chiral bis(adamantylidene-1,2-dioxetane)s

Bis(adamantylidene-1,2-dioxetane), upon conjugation to a planar chiral scaffold of [2.2]paracyclophane, gave chemical-triggerable circularly polarized chemiluminescence with a dissymmetry factor of 1.1 × 10-3 scale, to which exciton chirality upon chemiexcitation was assigned as the origin.

Much Stronger Chemiluminescence of 9-Mesityl-10-methylacridinium Ion than Lucigenin at Neutral Conditions for Co2+ Detection

9-Mesityl-10-methylacridinium ion (Acr+-Mes) is a donor-acceptor molecule with a much longer lifetime and a higher energy electron transfer excited state than natural photosynthetic reaction centers. Unlike lucigenin with a coplanar geometry, Acr+-Mes has an orthogonal geometry. There is no π conjugation between Acr+ and Mes. Due to its special electron donor-acceptor structure, it does not rely on strong alkalinity to generate an electron transfer state like lucigenin, which makes it possible to achieve chemiluminescence (CL) under weakly alkaline or neutral conditions. In this study, we report Acr+-Mes CL for the first time. Acr+-Mes generates about 400 times stronger CL intensity than lucigenin under neutral conditions (pH = 7) using KHSO5 as the coreactant. Moreover, Co2+ can enhance Acr+-Mes/KHSO5 CL remarkably. Acr+-Mes/KHSO5 CL enables Co2+ detection with a linear range of 0.5-500 nM and a limit of detection of 28 pM (S/N = 3). This method was tested for the detection of Co2+ in lake water, and the standard recovery rate of 96.8-107% was achieved. This study provides a new way to develop efficient CL systems in neutral solutions.

Recent Advancements on Self-Immolative System Based on Dynamic Covalent Bonds for Delivering Heterogeneous Payloads

The precisely spatial-temporal delivery of heterogeneous payloads from a single system with the same pulse is in great demand in realizing versatile and synergistic functions. Very few molecular architectures can satisfy the strict requirements of dual-release translated from single triggers, while the self-immolative systems based on dynamic covalent bonds represent the "state-of-art" of ultimate solution strategy. Embedding heterogeneous payloads symmetrically onto the self-immolative backbone with dynamic covalent bonds as the trigger, can respond to the quasi-bio-orthogonal hallmarks which are higher at the disease's microenvironment to simultaneously yield the heterogeneous payloads (drug A/drug B or drug/reporter). In this review, the modular design principles are concentrated to illustrate the rules in tailoring useful structures, then the rational applications are enumerated on the aspects of drug codelivery and visualized drug-delivery. This review, hopefully, can give the general readers a comprehensive understanding of the self-immolative systems based on dynamic covalent bonds for delivering heterogeneous payloads.

Synchrotron-based FTIR evaluation of biochemical changes in cancer and noncancer cells induced by brominated marine coelenteramine

The mode of action toward gastric cancer cells of brominated Coelenteramine, an analog of a metabolic product of a marine bioluminescent reaction, was investigated by synchrotron radiation-based FTIR. This method revealed that the anticancer activity of brominated Coelenteramine is closely connected with cellular lipids, by affecting their organization and composition. More specifically, there is an increasing extent of oxidative stress, which result in changes in membrane polarity, lipid chain packing and lipid composition. However, this effect was not observed in a noncancer cell line, helping to explain its selectivity profile. Thus, synchrotron radiation-based FTIR helped to identity the potential of this Coelenteramine analog in targeting membrane lipids, while proving to be a powerful technique to probe the mechanism of anticancer drugs.

Smooth Things Come in Threes: A Diabatic Surrogate Model for Conical Intersection Optimization

The optimization of conical intersection structures is complicated by the nondifferentiability of the adiabatic potential energy surfaces. In this work, we build a pseudodiabatic surrogate model, based on Gaussian process regression, formed by three smooth and differentiable surfaces that can adequately reproduce the adiabatic surfaces. Using this model with the restricted variance optimization method results in a notable decrease of the overall computational effort required to obtain minimum energy crossing points.

Enhanced Photon Emission of Chemiluminescent Luminophore for Ultra-Fast and Semi-Automatic Immunoassay toward Single Molecule Detection

Optical single molecule detection is normally achieved via amplifying the total emission of photons of luminophores and is strongly anticipated to extend the commercialized application of chemiluminescence (CL). To overcome the limited CL photons of molecule luminophores, herein, a nanocrystal (NC) luminophore self-amplified strategy is proposed to repetitively excite CL luminophores for amplifying the total CL photons per luminophore, which can be exploited to perform CL immunoassays (CLIAs) toward single molecule detection via employing KMnO₄ as the CL triggering agent and the dual-stabilizer-capped CdTe NCs as the CL luminophore. KMnO₄ can oxidize the S element from each stabilizer of mercaptopropionic acid (MPA) and release enough energy to excite the CdTe core for flash CL. The substantial MPA around each CdTe core enables every CdTe luminophore to be repetitively excited and give off amplified total CL photons in a self-enhanced way. The CL of CdTe NCs/KMnO₄ can release all photons rapidly, and the collection of all these photons can be utilized to determine the model analyte of thyroid-stimulating hormone antigen (TSH) with a limit of detection of 5 ag/mL (S/N = 3), which is corresponding to about 2-4 TSH molecules in a 20 μL sample. The whole immunologic operating process can be terminated within 6 min. This strategy of repetitively breaking the CL reaction involving chemical bonds within one luminophore is promising for semi-automatic as well as fully automatic single molecule detection and extends the commercialized application of CL immunodiagnosis.

Kinetic Intricacies of the Light Emission and Antiradical Influence of Exogenous Bioantioxidants Transformation Products in the Chemiluminescence Bioantioxidant Assay

The subject matter of the reported work refers to studying the interactions followed by the excited-state generation, which are chemical models of oxidative processes leading to a weak light emission emerging from living cells, and to explore the possibilities of using them as tools for evaluating the activity of oxygen-metabolism modulators, most prominently, natural bioantioxidants of biomedical value in particular. Methodologically, major attention is paid to analyzing the shapes of the time profiles of the light emission derived from a model sensory system in the presence of lipid samples of vegetable and animal (fish) origin rich in bioantioxidants. As a result, a modified reaction mechanism involving 12 elementary steps is proposed to rationalize the light-emission kinetics in the presence of natural bioantioxidants. We conclude that free radicals formed from bioantioxidants and their dimerization products contribute significantly to the general antiradical activity of lipid samples, which should be taken into account in developing efficient bioantioxidant assays for biomedical applications and while establishing the mechanisms of bioantioxidant effects on metabolic processes in vivo.

The Molecular Basis of Organic Chemiluminescence

Bioluminescence (BL) and chemiluminescence (CL) are interesting and intriguing phenomena that involve the emission of visible light as a consequence of chemical reactions. The mechanistic basis of BL and CL has been investigated in detail since the 1960s, when the synthesis of several models of cyclic peroxides enabled mechanistic studies on the CL transformations, which led to the formulation of general chemiexcitation mechanisms operating in BL and CL. This review describes these general chemiexcitation mechanisms-the unimolecular decomposition of cyclic peroxides and peroxide decomposition catalyzed by electron/charge transfer from an external (intermolecular) or an internal (intramolecular) electron donor-and discusses recent insights from experimental and theoretical investigation. Additionally, some recent representative examples of chemiluminescence assays are given.

A Green-Emitting Luminol Analogue as the Next-Generation Chemiluminescent Substrate in Biochemical Analysis

Luminol and its derivatives are extensively used as chemiluminogenic substrates in bioimaging and biochemical analysis. Luminol reagents can typically emit blue chemiluminescence (CL), whose wavelength is normally outside the most sensitive detection range of human naked eyes and most CL analyzers with silicon-based charge-coupled device (CCD) detectors. Development of luminol analogues with longer wavelength emission is thus attractive. Herein, four new phthalhydrazide CL probes (GL-1/2/3/4) have been prepared through the derivatization of luminol. The most promising one, 5-(4-hydroxy-1,3-dioxoisoindolin-2-yl)-2,3-dihydrophthalazine-1,4-dione (GL-1), emits bright green CL upon oxidation and shows enhanced CL performance compared to its parent luminol. Bloodstain imaging, horseradish peroxidase (HRP)-based immunoassay, and the analysis of glucose/glucose oxidase reaction have been performed using the GL-1 reagent. These results indicate that GL-1 is a new chemiluminogenic luminol analogue with great potential in real analytical applications and will be an alternative to replace luminol in practical CL analysis.

Nitrogen- and sulfur-doped graphene quantum dots for chemiluminescence

Graphene quantum dots (GQDs), as one of the most promising luminescent nanomaterials, have been receiving increasing attention in various applications. However, it is still a challenge to improve their chemiluminescence (CL) quantum efficiency. Herein, the CL emissions of nitrogen- and sulfur-doped GQDs (NS-GQDs), nitrogen-doped GQDs (N-GQDs) and undoped GQDs synthesized through one-pot high-temperature pyrolysis are investigated in their chemical reactions with bis(2-carbopentyloxy-3,5,6-trichlorophenyl) oxalate (CPPO) and hydrogen peroxide (H₂O₂). A bright blue emission, and yellowish green and yellowish white light from NS-GQDs, N-GQDs and GQDs can be observed, respectively, in the mixture solutions with CPPO and H₂O₂. For the first time, spooling CL spectroscopy was used to investigate the CL reaction mechanisms, illuminant decays and the absolute CL efficiencies of these three GQD systems. Compared with the same system of undoped GQDs, it has been found that the NS-GQDs not only present slower illuminant decay, but also display an absolute CL quantum efficiency of 0.01%, 5-fold enhancement, due to the increase in N and S doping for a well-defined band gap energy. Moreover, three peak wavelengths attributed to intrinsic emission at 425 nm, aggregation-induced emission (AIE) at 575 nm and S-doped emissive surface states at 820 nm are observed for the first time in the NS-GQD system. The CL spectrum of N-GQDs displays two emission peaks at 395 and 575 nm attributed to intrinsic emission and AIE, whereas the CL spectrum of undoped GQDs demonstrates 500 nm and 600 nm peak wavelengths attributed to core emission and AIE. Absolute CL quantum efficiencies from these emissions at these various peaks can be determined quantitatively. This study provides guidance on tuning the surface states of GQD for more conducive injection of electrons and holes, facilitating the production of CL emission, which is beneficial for promoting the development of optical, bioassay and energy conversion applications.

Hydrogen-bond-driven self-assembly of chemiluminophore affording long-lasting in vivo imaging

Developing chemiluminescence probe with a slow kinetic profile, even a constant emission within analytical time, would improve the analytical sensitivity, but still remains challenging. This work reports a novel strategy to afford long-lasting in vivo imaging by developing a self-assembled chemiluminophore HPQCL-Cl via the introduction of the hydrogen-bond-driven self-assembled dye HPQ to Schaap's dioxetane. Compared with classical chemiluminophore HCL, self-assembled HPQCL-Cl was isolated from the physiological environment, thereby lowering its deprotonation and prolonging its half-life. Based on HPQCL-Cl, the long-lasting in vivo imaging of 9L-lacz tumor was achieved by developing a β-gal-responsive probe. Its signals remained constant (<5% change) for about 20 min, which may provide a wide time window for the determination of β-gal. This probe also showed high tumor-to-normal tissue ratio throughout tumor resection, highlighting its potential in image-guided clinical surgery.

Exploring the Structural Space of Chemiluminescent 1,2-Dioxetanes

Chemiluminescent molecules which emit light in response to a chemical reaction are powerful tools for the detection and measurement of biological analytes and enable the understanding of complex biochemical processes in living systems. Triggerable chemiluminescent 1,2-dioxetanes have been studied and tuned over the past decades to advance quantitative measurement of biological analytes and molecular imaging in live cells and animals. A crucial determinant of success for these 1,2-dioxetane based sensors is their chemical structure, which can be manipulated to achieve desired chemical properties. In this Perspective, we survey the structural space of triggerable 1,2-dioxetane and assess how their design features affect chemiluminescence properties including quantum yield, emission wavelength, and decomposition kinetics. Based on this appraisal, we identify some structural modifications of 1,2-dioxetanes that are ripe for exploration in the context of chemiluminescent biological sensors.

Chemiluminescent polymeric nanoprobes for tumor diagnosis: A mini review

Chemiluminescence (CL), a distinct luminescent process by taking advantage of chemical reactions rather than external light source, has recently attracted considerable research interests due to its high sensitivity and low background signal. The sensitivity and specificity of chemiluminescent signals in complex tumor microenvironment provide a sound basis for accurate detection of tumors. Various chemiluminescent nanoprobes with superior performance have been obtained by structural modification of chemiluminescent units or introduction of fluorescent dyes. In this review, we focused on the recent progress of chemiluminescent polymeric systems based on various chromophore substrates, including luminol, peroxyoxalates, 1, 2-dioxetanes and their derivatives for tumor detecting. And we also emphasized the design strategies, mechanisms and diagnostic applications of representative chemiluminescent polymeric nanoprobes. Finally, the critical challenges and perspectives of chemiluminescent systems usage in tumor diagnosis were also discussed.

Combined Experimental and Theoretical Investigation into the Photophysical Properties of Halogenated Coelenteramide Analogs

Marine Coelenterazine is one of the most well-known chemi-/bioluminescent systems, and in which reaction the chemi-/bioluminophore (Coelenteramide) is generated and chemiexcited to singlet excited states (leading to light emission). Recent studies have shown that the bromination of compounds associated with the marine Coelenterazine system can provide them with new properties, such as anticancer activity and enhanced emission. Given this, our objective is to characterize the photophysical properties of a previously reported brominated Coelenteramide analog, by employing a combined experimental and theoretical approach. To better analyze the potential halogen effect, we have also synthesized and characterized, for the first time, two new fluorinated and chlorinated Coelenteramide analogs. These compounds show similar emission spectra in aqueous solution, but with different fluorescence quantum yields, in a trend that can be correlated with the heavy-atom effect (F > Cl > Br). A blue shift in emission in other solvents is also verified with the F−Cl−Br trend. More relevantly, the fluorescence quantum yield of the brominated analog is particularly sensitive to changes in solvent, which indicates that this compound has potential use as a microenvironment fluorescence probe. Theoretical calculations indicate that the observed excited state transitions result from local excitations involving the pyrazine ring. The obtained information should be useful for the further exploration of halogenated Coelenteramides and their luminescent properties.

Conical Intersection in Chemiluminescence of Cyclic Peroxides

Chemiluminescence (CL) utilizing chemiexcitation for energy transformation is one of the most highly sensitive and useful analytical techniques. The chemiexcitation is a chemical process of a ground-state reactant producing an excited-state product, in which a nonadiabatic event is facilitated by conical intersections (CIs), the specific molecular geometries where electronic states are degenerated. Cyclic peroxides, especially 1,2-dioxetane/dioxetanone derivatives, are the iconic chemiluminescent substances. In this Perspective, we concentrated on the CIs in the CL of cyclic peroxides. We first present a computational overview on the role of CIs between the ground (S₀) state and the lowest singlet excited (S₁) state in the thermolysis of cyclic peroxides. Subsequently, we discuss the role of the S₀/S₁ CI in the CL efficiency and point out misunderstandings in some theoretical studies on the singlet chemiexcitations of cyclic peroxides. Finally, we address the challenges and future prospects in theoretically calculating S₀/S₁ CIs and simulating the dynamics and chemiexcitation efficiency in the CL of cyclic peroxides.

Investigation of the Anticancer and Drug Combination Potential of Brominated Coelenteramines toward Breast and Prostate Cancer

Cancer is a very challenging disease to treat, both in terms of therapeutic efficiency and harmful side effects, which continues to motivate the pursuit for novel molecules with potential anticancer activity. Herein, we have designed, synthesized, and evaluated the cytotoxicity of different brominated coelenteramines, which are metabolic products and synthesis precursors of the chemi-/bioluminescent system of marine coelenterazine. The evaluation of the anticancer potential of these molecules was carried out for both prostate and breast cancer, while also exploring their potential for use in combination therapy. Our results provided further insight into the structure-activity relationship of this type of molecule, such as their high structural specificity, as well highlighting the 4-bromophenyl moiety as essential for the anticancer activity. The obtained data also indicated that, despite their similarity, the anticancer activity displayed by both brominated coelenteramines and coelenterazines should arise from independent mechanisms of action. Finally, one of the studied coelenteramines was able to improve the profile of a known chemotherapeutic agent, even at concentrations in which its anticancer activity was not relevant. Thus, our work showed the potential of different components of marine chemi-/bioluminescent systems as novel anticancer molecules, while providing useful information for future optimizations.

Development of lucigenin-N-hydroxyphthalimide chemiluminescence system and its application to sensitive detection of Co2

N-hydroxyphthalimide (NHPI) is an efficient organic catalyst and an important chemical raw material which can be used as an intermediate in organic synthesis of drugs and pesticides. In this study, NHPI has been used as a coreactant of lucigenin chemiluminescence (CL) for the first time. The CL of the developed system is significantly enhanced in the presence of Co²⁺. Therefore, we developed a novel lucigenin-NHPI CL method coupled with flow injection analysis for the sensitive, precise, and selective determination of Co²⁺. The linear range of this method is 1-1000 nM, and the detection limit is 67 pM (S/N = 3). In addition, this method has a good selectivity for Co²⁺. It has been applied to the detection of Co²⁺ in lake water, and the standard recovery rate is 95.9-103.2%, indicating that the method is feasible.

Cancer therapeutics based on diverse energy sources

Light-based phototherapy has been developed for cancer treatment owing to its non-invasiveness and spatiotemporal control. Despite the unique merits of phototherapy, one critical disadvantage of light is its limited penetration depth, which restricts its application in cancer treatment. Although many researchers have developed various strategies to deliver light into deep-seated tumors with two-photon and near-infrared light irradiation, phototherapy encounters the peculiar limitations of light. In addition, high oxygen dependency is another limitation of photodynamic therapy to treat hypoxic tumors. To overcome the drawbacks of conventional treatments, various energy sources have been developed for cancer treatment. Generally, most energy sources, such as ultrasound, chemiluminescence, radiation, microwave, electricity, and magnetic field, are relatively free from the restraint of penetration depth. Combining other strategies or therapies with other energy-source-based therapies improves the strength and compensates for the weakness. This tutorial review focuses on recent advances in the diverse energy sources utilized in cancer treatment and their future perspectives.

Chemiluminescent Cucurbit[n]uril-Based Chemosensor for the Detection of Drugs in Biofluids

Chemiluminescence-based detection methods offer a superior signal-to-noise ratio and are commonly adopted for biosensors. This work presents the design and implementation of a supramolecular assay based on a chemiluminescent chemosensor. Specifically, an indicator displacement assay (IDA) with the supramolecular host-guest complex of chemiluminescent phenoxy 1,2-dioxetane and cucurbit[8]uril enables the low-micromolar detection of drugs in human urine and human serum samples. Cucurbit[8]uril thereby acts as a non-surfactant chemiluminescence enhancer and a synthetic receptor. Additionally, we show that adding an equimolar amount of cucurbit[8]uril to a commercially available dioxetane used in standard enzymatic chemiluminescence immunoassays enhances the chemiluminescence by more than 15 times. Finally, we demonstrate that a chemiluminescence resonance energy transfer between a unimolecular macrocyclic cucurbit[7]uril-dye conjugate and a phenoxy 1,2-dioxetane can be utilized to detect the herbicide paraquat at a micromolar concentration in aqueous media.

Progress and Challenges of Point-of-Need Photonic Biosensors for the Diagnosis of COVID-19 Infections and Immunity

The new coronavirus disease, COVID-19, caused by SARS-CoV-2, continues to affect the world and after more than two years of the pandemic, approximately half a billion people are reported to have been infected. Due to its high contagiousness, our life has changed dramatically, with consequences that remain to be seen. To prevent the transmission of the virus, it is crucial to diagnose COVID-19 accurately, such that the infected cases can be rapidly identified and managed. Currently, the gold standard of testing is polymerase chain reaction (PCR), which provides the highest accuracy. However, the reliance on centralized rapid testing modalities throughout the COVID-19 pandemic has made access to timely diagnosis inconsistent and inefficient. Recent advancements in photonic biosensors with respect to cost-effectiveness, analytical performance, and portability have shown the potential for such platforms to enable the delivery of preventative and diagnostic care beyond clinics and into point-of-need (PON) settings. Herein, we review photonic technologies that have become commercially relevant throughout the COVID-19 pandemic, as well as emerging research in the field of photonic biosensors, shedding light on prospective technologies for responding to future health outbreaks. Therefore, in this article, we provide a review of recent progress and challenges of photonic biosensors that are developed for the testing of COVID-19, consisting of their working fundamentals and implementation for COVID-19 testing in practice with emphasis on the challenges that are faced in different development stages towards commercialization. In addition, we also present the characteristics of a biosensor both from technical and clinical perspectives. We present an estimate of the impact of testing on disease burden (in terms of Disability-Adjusted Life Years (DALYs), Quality Adjusted Life Years (QALYs), and Quality-Adjusted Life Days (QALDs)) and how improvements in cost can lower the economic impact and lead to reduced or averted DALYs. While COVID19 is the main focus of these technologies, similar concepts and approaches can be used and developed for future outbreaks of other infectious diseases.