Thermoresponsive Surfaces Grafted by Shrinkable Hydrogel Poly(N-isopropylacrylamide) for Controlling Microalgae Cells Adhesion during Biofilm Cultivation

Temperature-controlled microalgal biofilm detachment and harvesting assisted by ultrasonic from 3D porous substrates grafted with thermosensitive gels

Microalgae have been renowned as the most promising energy organism with significant potential in carbon fixation. In the large-scale cultivation of microalgae, the 3D porous substrate with higher specific surface area is favorable to microalgae adsorption and biofilm formation, whereas difficult for biofilm detachment and microalgae harvesting. To solve this contradiction, N-isopropylacrylamide, a temperature-responsive gels material, was grafted onto the inner surface of the 3D porous substrate to form temperature-controllable interface wettability. The interfacial free energy between microalgae biofilm and the substrates increased from -63.02 mJ/m2 to -31.89 mJ/m2 when temperature was lowered from 32 °C to 17 °C, weakening the adsorption capacity of cells to the surface, and making the biofilm detachment ratio increased to 50.8%. When further cooling the environmental temperature to 4 °C, the detachment capability of microalgae biofilm kept growing. 91.6% of the cells in the biofilm were harvesting from the 3D porous substrate. And the biofilm detached rate was up to 19.84 g/m2/h, realizing the temperature-controlled microalgae biofilm harvesting. But, microalgae growth results in the secretion of extracellular polymeric substances (EPS), which enhanced biofilm adhesion and made cell detachment more difficult. Thus, ultrasonic vibration was used to reinforce biofilm detachment. With the help of ultrasonic vibration, microalgae biofilm detached rate increased by 143.45% to 41.07 g/m2/h. These findings provide a solid foundation for further development of microalgae biofilm detachment and harvesting technology.

Artificial neural networks prediction and optimization based on four light regions for light utilization from Synechocystis sp. PCC 6803

Light is crucial in microalgae growth. However, dividing the microalgae growth region into light and dark regions has limitations. In this study, the light response of Synechocystis sp. PCC 6803 was investigated to define four light regions (FLRs): light compensation region, light limitation region, light saturation region, and photoinhibition region. The proportions of cells' residence time in the FLRs and the number of times cells (NTC) passed through the FLRs in photobioreactors were calculated by using MATLAB. Based on the FLRs and NTC passed through the FLRs, a growth model was established by using artificial neural network (ANN).The ANN model had a validation R2 value of 0.97, which was 76.36% higher than the model based on light-dark regions. The high accuracy of the ANN model was further verified through dynamic adjustment of light intensity experiments.This study confirmed the importance of the FLRs for studying microalgae growth dynamics.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Research progress in decellularized extracellular matrix hydrogels for intervertebral disc degeneration

As one of the most common clinical disorders, low back pain (LBP) influences patient quality of life and causes substantial social and economic burdens. Many factors can result in LBP, the most common of which is intervertebral disc degeneration (IDD). The progression of IDD cannot be alleviated by conservative or surgical treatments, and gene therapy, growth factor therapy, and cell therapy have their own limitations. Recently, research on the use of hydrogel biomaterials for the treatment of IDD has garnered great interest, and satisfactory treatment results have been achieved. This article describes the classification of hydrogels, the methods of decellularized extracellular matrix (dECM) production and the various types of gel formation. The current research on dECM hydrogels for the treatment of IDD is described in detail in this article. First, an overview of the material sources, decellularization methods, and gel formation methods is given. The focus is on research performed over the last three years, which mainly consists of bovine and porcine NP tissues, while for decellularization methods, combinations of several approaches are primarily used. dECM hydrogels have significantly improved mechanical properties after the polymers are cross-linked. The main effects of these gels include induction of stem cell differentiation to intervertebral disc (IVD) cells, good mechanical properties to restore IVD height after polymer cross-linking, and slow release of exosomes. Finally, the challenges and problems still faced by dECM hydrogels for the treatment of IDD are summarised, and potential solutions are proposed. This paper is the first to summarise the research on dECM hydrogels for the treatment of IDD and aims to provide a theoretical reference for subsequent studies.

Temperature-controlled microalgae biofilm adsorption/desorption in a thermo-responsive light-guided 3D porous photo-bioreactor for CO2 fixation

Microalgae biofilm-based culture provides an efficient CO₂ reduction and wastewater treatment method for its high photosynthetic efficiency and density. As supporting substrates for microalgae biofilm, porous materials have a big available adsorption area, but mutual shading makes it difficult to transmit external light to the internal surface for attached cells' photosynthesis. Thus, light-guided particles (SiO₂) were introduced into photosensitive resin to fabricate a light-guided ordered porous photobioreactor (PBR) by 3D printing technology in this study. The space utilization of the PBR was significantly enhanced and the effective microalgae adsorption area was increased by 13.6 times. Further, a thermo-responsive hydrogel was grafted onto the surface of the substrate to form a smart temperature-controllable interface that could enhance microalgae adsorption and desorption in both directions. When the thermo-responsive layer received light, it would generate heat due to the hydrogel's photo-thermal effect. And the surface temperature would then raise to 33 °C, higher than the hydrogel phase transition point of 32 °C, making the surface shrinking and more hydrophobicity for microalgae cells attachment. The microalgae cells' adsorption capacity increased by 103%, resulting in a high microalgae growth rate of 3.572 g m^-2 d^-1. When turning off the light, the surface temperature would cool down to below 20 °C, the surface would shrink. And the biofilm shows a 564.7% increase in desorption ability, realizing temperature-controlled microalgae harvesting.

Insight into the comprehensive effect of carbon dioxide, light intensity and glucose on heterotrophic-assisted phototrophic microalgae biofilm growth: A multifactorial kinetic model

Heterotrophic-assisted photoautotrophic microalgae biofilm cultivation was an alternative way to realize CO₂ reduction and wastewater treatment. Growth kinetics supplied a channel to better understand how the cultivation conditions affect microalgal growth and CO₂ reduction. However, the two growth modes (heterotroph and photoautotroph) have different needs for organic and inorganic nutrients. Thus, combining the threshold theory and multiplication theory, an integral multifactorial kinetic model that looking insight into the comprehensive effect of glucose, CO₂, light intensity, and nitrate was developed for heterotrophic-assisted photoautotrophic microalgae biofilm growth in this study. R² between model and experiment was 0.99. It predicted the maximum specific growth rate and maximum CO₂ consumption rate of heterotrophic-assisted photoautotrophic microalgae biofilm was 1.868 h^-1 and 1.02 h^-1, respectively. This model fully explained the influence of the main factors on microalgae biofilm growth and reasonably predicted the growth rate of microalgae biofilm under different growth conditions.

Microalgae as Soft Permeable Particles

The colloidal stability of non-motile algal cells in water drives their distribution in space. An accurate description of the interfacial properties of microalgae is therefore critical to understand how microalgae concentrations can change in their biotope or during harvesting processes. Here, we probe the surface charges of three unicellular algae─Chlorella vulgaris, Nannochloropsis oculata, and Tetraselmis suecica─through their electrophoretic mobility. Ohshima's soft particle theory describes the electrokinetic properties of particles covered by a permeable polyelectrolyte layer, a usual case for biological particles. The results appear to fit the predictions of Ohshima's theory, proving that all three microalgae behave electrokinetically as soft particles. This allowed us to estimate two characteristic parameters of the polyelectrolyte external layer of microalgae: the volume charge density and the hydrodynamic penetration length. Results were compared with transmission electron microscopy observations of the algal cells' surfaces, and in particular of their extracellular polymeric layer, which was identified with the permeable shell evidenced by electrophoretic measurements. Noticeably, the algal surface potentials estimated from electrophoretic mobility using the soft particle theory are less negative than the apparent zeta potentials. This finding indicates that electrostatics are expected to play a minor role in phenomena of environmental and industrial importance, such as microalgae aggregation or adhesion.

Phage Predation Promotes Filamentous Bacterium Piscinibacter Colonization and Improves Structural and Hydraulic Stability of Microbial Aggregates

Although bacteria-phage interactions have broad environmental applications and ecological implications, the influence of phage predation on bacterial aggregation and structural stability remains largely unexplored. Herein, we demonstrate that inefficient lytic phage predation can promote host filamentous bacterium Piscinibacter colonization onto non-host Thauera aggregates, improving the structural and hydraulic stability of the dual-species aggregates. Specifically, phage predation at 10³-10⁴ PFU/mL (i.e., multiplication of infection at 0.01-0.1) promoted initial Piscinibacter colonization by 10-15 folds and resulted in 29-31% higher abundance of Piscinibacter in the stabilized aggregates than that in the control aggregates without phage predation. Transcriptomic analysis revealed upregulated genes related to quorum sensing (by 15-92 folds) and polysaccharide secretion (by 10-90 folds) within the treated aggregates, which was consistent with 120-172% higher content of polysaccharides for the treated dual-species aggregates. Confocal laser scanning microscopic images further confirmed the increase of filamentous bacteria and polysaccharides (both with wider distribution) within the dual-species aggregates. Accordlingly, the aggregates' structural strength (via atomic force microscopes) and shear resistance (via hydraulic stress tests) increased by 77 and 42%, respectively, relative to the control group. In the long-term experiments, the enhanced hydraulic stability of the treated aggregates could facilitate dwelling bacteria propagation in flow-through conditions. Overall, our study demonstrates that phage predation can promote bacterial aggregation and enhance aggregate structural stability, revealing the beneficial role of lytic phage predation on bacterial symbiosis and environmental adaptivity.

Air-liquid interface cultivation of Navicula incerta using hollow fiber membranes

Microalgae cultivation in open ponds requires a large footprint, while most photobioreactors need improvement in the ratio of surface to volume and energy consumption. In this study, polyethersulfone (PES) and poly(vinylidene fluoride) (PVDF) hollow fiber membranes with a large surface area were rearranged into open-ended and dead-ended configurations to improve the air-liquid interface cultivation of Navicula incerta. N. incerta were successfully grown on the porous membrane surface with the nutrients circulating inside the lumen. Fourier-transform infrared spectra showed the accumulation of polysaccharides, proteins and humic acids. Hydrophilic polysaccharides reduced water contact angles on PES and PVDF membranes to 37.2 ± 2.6° and 55.7 ± 3.3°, respectively. However, the porosity of PES (80.1 ± 1.1%) and PVDF (61.3 ± 4.5%) membranes were not significantly affected even after cultivation and harvesting of N. incerta. Scanning electron images further confirmed that N. incerta, cell debris and extracellular organic matter accumulated on the membrane. With large pores and a hydrophobic surface, PVDF hollow fiber membranes offered a greater improvement in N. incerta cell growth rate compared to PES hollow fiber membranes despite using different configurations. In the dead-ended configuration, they even attained the greatest improvement in N. incerta growth rate, up to 54.0%. However, PES hollow fiber membranes only achieved improvement in harvesting efficiency within the range of 18.7-38.0% due to weak cell adhesion. PVDF hollow fiber membranes significantly promoted the growth of microalgae N. incerta through the air-liquid interface system, leading to potential applications in wastewater treatment.

Granular indigenous microalgal-bacterial consortium for wastewater treatment: Establishment strategy, functional microorganism, nutrient removal, and influencing factor

Granular indigenous microalgal-bacterial consortium (G-IMBC) system integrates the advantages of the MBC and granular activated sludge technologies, also with superior microalgal wastewater adaptation capacity. In this review, the concept of IMBC was firstly described, followed by its establishment and acclimation strategies. Characteristics and advantages of G-IMBC system compared to other IMBC systems (i.e., attached and floc IMBC systems) were then introduced. Moreover, the involved functional microorganisms and their interactions, as well as nutrient removal mechanisms were systematically and critically reviewed. Finally, the influencing factors including wastewater characteristics and operation factors were discussed. This study aims to provide a comprehensive up-to-date summary of the G-IMBC system for sustainable wastewater treatment.

How Interfacial Properties Affect Adhesion: An Analysis from the Interactions between Microalgal Cells and Solid Substrates

Microalgal biofilm, a stable community of many algal cells attached to a solid substrate, plays a significant role in the efficient accumulation of renewable energy feedstocks, wastewater treatment, and carbon reduction. The adhesion tendency of microalgal cells on solid substrates is the basis for controlling the formation and development of microalgal biofilm. To promote the adhesion of microalgal cells on solid substrates, it is necessary to clarify which surface properties have to be changed in the most critical factors affecting the adhesion. However, there have been few systematic discussions on what surface properties influence the adhesion tendency of algal cells on solid substrates. In this study, the essential principle of microalgal cell adhesion onto solid substrates was explored from the perspective of the interaction energy between microalgal cells and solid substrates. The influence of surface properties between microalgal cells and solid substrates on interaction energies was discussed via extended Derjaguin-Landau-Verwey-Overbeek (eDLVO) theory and a sensitivity analysis. The results showed that surface properties, including surface potential (ξ) and surface free energy components, significantly affect the adhesion tendency of microalgal cells on different solid substrates. When the solid surface possesses positive charges (ξ > 0), reducing ξ or the electron donor components of the solid substrate (γ_s^-) is an effective measure to promote microalgal cell adhesion onto the solid substrate. When the solid surface possesses negative charges (ξ < 0), an increase in either γ_s^- or the absolute value of ξ should be avoided in the process of microalgae adhesion. Overall, this research provides a direction for the selection of solid substrates and a direction for surface modification to facilitate the adhesion tendency of microalgal cells on solid substrates under different scenarios.

Revealing the synergistic effects of cells, pigments, and light spectra on light transfer during microalgae growth: A comprehensive light attenuation model

As the sole energy for photosynthesis, light decrease rapidly with path due to absorption by pigments and scattering by cells in microalgal suspensions. By comprehensively considering cell concentrations, pigment components, and light spectra, a modified Cornet model for light transmission in microalgal suspensions is established. The developed model better fits experimental data with a higher adjusted R², which is 5% higher than the model that is based only on cell concentration. The attenuation of blue light is the most severe, followed by red and green light. Among the three main pigments, total carotenoids contribute the most to the absorption of blue and green light (with contribution coefficients of 89.26 ± 4.53% and 46.04 ± 3.77%, respectively), and chlorophyll a contributes the most to the absorption of red light (with a contribution coefficient of 75.33 ± 5.08%). This study provides a better understanding and prediction of light transmission during microalgal cultivation.