Coordinatively Unsaturated Selenides over CuFeSe2 toward Highly Efficient Mercury Immobilization

Adsorption removal of mercury from flue gas by metal selenide: A review

Mercury (Hg) pollution has been a global concern in recent decades, posing a significant threat to entire ecosystems and human health due to its cumulative toxicity, persistence, and transport in the atmosphere. The intense interaction between mercury and selenium has opened up a new field for studying mercury removal from industrial flue gas pollutants. Besides the advantages of good Hg° capture performance and low secondary pollution of the mineral selenium compounds, the most noteworthy is the relatively low regeneration temperature, allowing adsorbent regeneration with low energy consumption, thus reducing the utilization cost and enabling recovery of mercury resources. This paper reviews the recent progress of mineral selenium compounds in flue gas mercury removal, introduces in detail the different types of mineral selenium compounds studied in the field of mercury removal, reviews the adsorption performance of various mineral selenium compounds adsorbents on mercury and the influence of flue gas components, such as reaction temperature, air velocity, and other factors, and summarizes the adsorption mechanism of different fugitive forms of selenium species. Based on the current research progress, future studies should focus on the economic performance and the performance of different carriers and sizes of adsorbents for the removal of Hg0 and the correlation between the gas-particle flow characteristics and gas phase mass transfer with the performance of Hg0 removal in practical industrial applications. In addition, it remains a challenge to distinguish the oxidation and adsorption of Hg0 quantitatively.

FeSe2 and Its Composites for Pollutants Removal: Synthesis, Mechanisms, and Application Potential

In recent years, the research of FeSe2 and its composites in environmental remediation has been gradually carried out. And the FeSe2 materials show great catalytic performance in photocatalysis, electrocatalysis, and Fenton-like reactions for pollutants removal. Therefore, the studies and applications of FeSe2 materials are reviewed in this work, including the common synthesis methods, the role of Fe and Se species as well as the catalyst structure, and the potential for practical environmental applications. Hereinto, it is worth noting in particular that the lower-valent Se (Se2-), unsaturated Se (Se-), and Se vacancies (VSe) can play different roles in promoting pollutants removal. In addition, the FeSe2 material also demonstrates high stability, reusability, and adaptability over a wider pH range as well as universality to different pollutants. In view of the overall great properties and performance of FeSe2 materials compared with other typical Fe-based materials, it deserves and needs further research. And finally, this paper presents some challenges and perspectives in future development, looking forward to providing helpful guidance for the subsequent research of FeSe2 and its composites for environmental application.

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas

The substantial amount of mercury emissions from coal-fired flue gas causes severe environmental contamination. With the Minamata Convention now officially in force, it is critical to strengthen mercury pollution control. Existing activated carbon injection technologies suffer from poor desulfurization performance and risk secondary-release risks. Therefore, considering the potential industrial application of adsorbents, we selected cost-effective and readily available activated coke (AC) as the carrier in this study. Four metal selenides-copper, iron, manganese, and tin-were loaded onto the AC to overcome the application problems of existing technologies. After 120 min of adsorption, the CuSe/AC exhibited the highest efficiency in removing Hg0, surpassing 80% according to the experimental findings. In addition, the optimal adsorption temperature window was 30-120 °C, the maximum adsorption rate was 2.9 × 10-2 mg·g-1·h-1, and the effectiveness of CuSe/AC in capturing Hg0 only dropped by 5.2% in the sulfur-containing atmosphere. The physicochemical characterization results indicated that the AC surface had a uniform loading of CuSe with a nanosheet structure resembling polygon and that the Cu-to-Se atomic ratio was close to 1:1. Finally, two possible Hg0 reaction pathways on CuSe/AC were proposed. Moreover, it was elucidated that the highly selective binding of Hg0 with ligand-unsaturated Se- was the key factor in achieving high adsorption efficiency and sulfur resistance in the selenium-functionalized AC adsorbent. This finding offers substantial theoretical support for the industrial application of this adsorbent.

Nano‑selenium functionalized chitosan gel beads for Hg(II) removal from apple juice

The presence of potentially toxic elements and compounds poses threats to the quality and safety of fruit juices. Among these, Hg(II) is considered as one of the most poisonous heavy metals to human health. Traditional chitosan-based and selenide-based adsorbents face challenges such as poor adsorption capacity and inconvenient separation in juice applications. In this study, we prepared nano‑selenium functionalized chitosan gel beads (nanoSe@CBs) and illustrated the synergistic promotions between chitosan and nanoSe in removing Hg(II) from apple juice. The preparation conditions, adsorption behaviors, and adsorption mechanism of nanoSe@CBs were systematically investigated. The results revealed that the adsorption process was primarily controlled by chemical adsorption. At the 0.1 % dosage, the adsorbent exhibited high uptake, and the maximum adsorption capacity from the Langmuir isotherm model could reach 376.5 mg/g at room temperature. The adsorbent maintained high adsorption efficiency (> 90 %) across a wide range of Hg(II) concentrations (0.01 to 10 mg/L) and was unaffected by organic acids present in apple juice. Additionally, nanoSe@CBs showed negligible effects on the quality of apple juice. Overall, nanoSe@CBs open up possibilities to be used as a safe, low-cost and highly-efficient adsorbent for the removal of Hg(II) from juices and other liquid foods.

Biomimetic mercury immobilization by selenium functionalized polyphenylene sulfide fabric

Highly efficient decontamination of elemental mercury (Hg0) remains an enormous challenge for public health and ecosystem protection. The artificial conversion of Hg0 into mercury chalcogenides could achieve Hg0 detoxification and close the global mercury cycle. Herein, taking inspiration from the bio-detoxification of mercury, in which selenium preferentially converts mercury from sulfoproteins to HgSe, we propose a biomimetic approach to enhance the conversion of Hg0 into mercury chalcogenides. In this proof-of-concept design, we use sulfur-rich polyphenylene sulfide (PPS) as the Hg0 transporter. The relatively stable, sulfur-linked aromatic rings result in weak adsorption of Hg0 on the PPS rather than the formation of metastable HgS. The weakly adsorbed mercury subsequently migrates to the adjacent selenium sites for permanent immobilization. The sulfur-selenium pair affords an unprecedented Hg0 adsorption capacity and uptake rate of 1621.9 mg g-1 and 1005.6 μg g-1 min-1, respectively, which are the highest recorded values among various benchmark materials. This work presents an intriguing concept for preparing Hg0 adsorbents and could pave the way for the biomimetic remediation of diverse pollutants.

Multimedia Mercury Recovery from Coal-Fired Power Plants Utilizing N-Containing Conjugated Polymer Functionalized Fly Ash

To recover multimedia mercury from coal-fired power plants, a novel N-containing conjugated polymer (polyaniline and polypyrrole) functionalized fly ash was prepared, which could continuously adsorb 99.2% of gaseous Hg0 at a high space velocity of 368,500 h-1 and nearly 100% of aqueous Hg2+ in the solution pH range of 2-12. The adsorption capacities of Hg0 and Hg2+ reach 1.62 and 101.36 mg/g, respectively. Such a kind of adsorbent has good environmental applicability, i.e. good resistance to coexisting O2/NO/SO2 and coexisting Na+/K+/Ca2+/Mg2+/SO42-. This adsorbent has very low specific resistances (6 × 106-5 × 109 Ω·cm) and thus can be easily collected by an electrostatic precipitator under low-voltage (0.1-0.8 kV). The Hg-saturated adsorbent can desorb almost 100% Hg under relatively low temperature (<250 °C). Characterization and theoretical calculations reveal that conjugated-N is the critical site for adsorbing both Hg0 and Hg2+ as well as activating chlorine. Gaseous Hg0 is oxidized and adsorbed in the form of HgXClX(ad), while aqueous Hg2+ is adsorbed to form a complex with conjugated-N, and parts of Hg2+ are reduced to Hg+ by conjugated-N. This adsorbent can be easily large-scale manufactured; thus, this novel solid waste functionalization method is promising to be applied in coal-fired power plants and other Hg-involving industrial scenes.

Design of Ion Channel Confined Binary Metal Cu-Fe Selenides for All-Climate, High-Capacity Sodium Ion Batteries

Exploring special anode materials with high capacity, stable structure, and extreme temperature feasibility remains a great challenge in secondary sodium based energy systems. Here, a bimetallic Cu-Fe selenide nanosheet with refined nanostructure providing confined internal ion transport channels are reported, in which the structure improves the pseudocapacitance and reduces the charge transfer resistance for making a significant contribution to accelerating the reaction dynamics. The CuFeSe2 nanosheets have a high initial specific capacity of 480.4 mAh g-1 at 0.25 A g-1 , showing impressively excellent rate performance and ultralong cycling life over 1000 cycles with 261.1 mAh g-1 at 2.5 A g-1 . Meanwhile, it exhibits a good sodium storage performance at extreme temperatures from -20 °C to 50 °C, supporting at least 500 cycles. Besides, the CuFeSe2 ||Na3 V2 (PO4 )3 /C full cell delivers a high specific capacity of 168.5 mAh g-1 at 0.5 A g-1 and excellent feasibility for over 600 cycles long cycling. Additionally, the Na+ storage mechanisms are further revealed by ex situ X-ray diffraction (XRD) and in situ transmission electron microscopy (TEM) techniques. A feasible channelized structural design strategy is provided that inspires new instruction into the development of novel materials with high structural stability and low volume expansion rate toward the application of other secondary batteries.

Self-Constructing 100% Water-Resistant Metal Sulfides through In Situ Acid Etching for Effective Elemental Mercury (Hg0) Capture

Metal sulfides (MSs) can efficiently entrap thiophilic components, such as elemental mercury (Hg0), and realize environmental remediation. However, there is still a critical problem challenging the extensive application of MSs in related areas, i.e., how to self-regulate their water (H2O) resistance without complexing the sorbent preparation procedure. This work for the first time developed an in situ acid-etching method that self-engineered the water affinity of MSs through changing the interfacial interaction between MSs and Hg0/H2O. The introduction of abundant, undercoordinated sulfur onto the sorbent surface was the primary reason accounting for the significantly improved H2O resistance. The high surface coverage of undercoordinated sulfur induced the formation of polysulfur chains (Sx2-) that stabilized Hg0 via a bridging bond and repelled H2O, attributed to the favorable electron configurations. These properties made the surface of MSs highly hydrophobic and increased the adsorption selectivity toward Hg0 over H2O. The MSs exhibited 100% H2O resistance even in the presence of 20% H2O, which is much higher than the H2O concentration under most practical scenarios. From these perspectives, this work for the first time overcame the detrimental effects of H2O on MSs through a self-regulating way that is scalable and negligibly complexes the sorbent preparation pathway. The highly water-resistant and cost-effective MSs as prepared can serve as efficient Hg0 removal from industrial flue gas in the future.

Constructing the coordination environment of Se-O in Cu2-xSe for electrochemical hydrogen evolution

In this work, a Se-O bond is introduced by a simple oxidation method to realize the structural transformation from Cu2-xSe to Cu2O(SeO3) for enhanced electrocatalytic hydrogen evolution reaction (HER). The experiment and calculation results showed that Cu2O(SeO3) facilitated charge transfer and possessed a small barrier during the HER.

To be support or promoter: the mode of introducing ceria into commercial V2O5/TiO2 catalyst for enhanced Hg0 oxidation

Ce-modified commercial vanadium-based catalysts are still in a rapid development stage in terms of optimizing Hg⁰ oxidation performance. Due to the universal property of ceria, it can act as either support or promoter to supported vanadium-based catalysts. However, the introduction mode of Ce on the Hg⁰ oxidation is still unclarified. Herein, introducing Ce to vanadium-based catalysts as a promoter (VCe/Ti) plays a more effective role in the Hg⁰ oxidation than only doping Ce into TiO₂ support (V/CeTi). It is revealed that the strong interaction between V and Ce increases the orbital hybridization, and reduces the lowest unoccupied molecular orbital (LUMO) of V, which is conducive to adsorbing and activating HCl. The excellent performance of the VCe/Ti catalyst can be ascribed to its superior redox ability, stronger HCl adsorption capacity, abundant surface oxygen vacancies, and the redox equilibrium (Ce³⁺ + V⁵⁺ ↔ Ce⁴⁺ + V⁴⁺), which improves electron transfer, and thus the catalytic activity. This work provides the potential application of Ce-modified V-based catalysts for the simultaneous control of NO_x and Hg⁰ in stationary sources.

Effecting pattern study of SO2 on Hg0 removal over α-MnO2 in-situ supported magnetic composite

α-MnO₂ was in-situ supported onto silica coated magnetite nanoparticles (MagS-Mn) to study the adsorption and oxidation of Hg⁰ as well as the effecting patterns of SO₂ and O₂ on Hg⁰ removal. MagS-Mn showed Hg⁰ removal capacity of 1122.6 μg/g at 150 °C with the presence of SO₂. Hg⁰ adsorption and oxidation efficiencies were 2.4% and 90.6%, respectively. Hg⁰ removal capability deteriorated at elevated temperatures. Surface oxygen and manganese chemistry analysis indicated that SO₂ inhibited the Hg⁰ removal through consumption of adsorbed oxygen and reduction of high valence manganese. This inhibiting effect was observed to be counteracted by O₂ at lower temperatures. O₂ tended to compete with SO₂ for active sites and further create additional adsorbed oxygen sites for Hg⁰ surface reaction via surface dissociative adsorption rather than replenish the active sites consumed by SO₂. The high valence manganese was also preserved by O₂ which was essential to Hg⁰ oxidation. The intervention of O₂ in the inhibition of SO₂ on Hg⁰ removal was weakened at temperatures higher than 250 °C. Aa a result, Hg⁰ tends to be catalytic oxidized in the condition of low reaction temperatures and with the presence of O₂ over α-MnO₂ oriented composites.

Application of graphene aerogels in oil spill recovery: A review

Oil spills have long been a serious threat to marine environment. Physical recovery is the safest and most efficient method in the emergency disposal of offshore oil spill. Graphene aerogel (GA) has a wide application prospect in offshore oil spill emergency recovery and disposal given its unique structural characteristics. In this article, the preparation methods of GA adsorbent are summarized. On this basis, in the background of the application of offshore oil spill recovery, the related properties and targeted modification schemes of GA, such as adsorption, mechanical, and magnetic properties, as well as photothermal conversion properties for disposal of oil spills with high viscosity, are discussed. The Joule heating/photothermal conversion scheme can improve the recovery efficiency of offshore high viscosity oil spills, and adding metal composite materials can increase the magnetic performance and surface roughness of GA and facilitate positioning and recovery after offshore oil spills disposal. The challenges and prospects of modification research are also highlighted, and guidance for further optimizing the performance of GA in offshore oil spill recovery is provided.

Simultaneous Adsorption of Gaseous Hg0 and Hg(II) by Regenerable Monolithic FeMoSx/TiO2: Mechanism and its Application in the Centralized Control of Hg Pollution in Coal-Fired Flue Gas

FeMoS_x/TiO₂ was investigated as a regenerable sorbent to simultaneously adsorb Hg⁰ and Hg(II) from coal-fired flue gas for the centralized control of Hg pollution discharged from coal-fired power plants. The performance of FeMoS_x/TiO₂ for Hg(II) and/or Hg⁰ adsorption was evaluated on a fixed-bed reactor at 80 ^oC, and the mutual interference between Hg⁰ adsorption and Hg(II) adsorption was analyzed using individual adsorption, simultaneous adsorption, and two-stage adsorption. FeMoS_x/TiO₂ displayed an excellent capacity for individual Hg⁰ adsorption (41.8 mg g^-1) and a moderate capacity for individual Hg(II) adsorption (0.48 mg g^-1). Two types of adsorption sites were present on FeMoS_x/TiO₂ for gaseous Hg adsorption (S⁰ and FeS₂/MoS₃ sites). X-ray photoelectron spectroscope and kinetic analyses demonstrated that Hg⁰ and Hg(II) could adsorb onto S⁰ sites, whereas only Hg⁰ was adsorbed onto FeS₂/MoS₃ sites. As Hg⁰ competed with Hg(II) for the S⁰ sites, the amount of Hg(II) adsorbed slightly decreased by 16% in the presence of Hg⁰. However, Hg⁰ adsorption onto the FeS₂/MoS₃ sites predominated over the Hg⁰ adsorption onto FeMoS_x/TiO₂ and it was not inhibited in the presence of Hg(II). Therefore, the amount of Hg⁰ adsorbed on FeMoS_x/TiO₂ was only decreased by 2% in the presence of Hg(II).

Structure-Directing Role of Support on Hg0 Oxidation over V2O5/TiO2 Catalyst Revealed for NOx and Hg0 Simultaneous Control in an SCR Reactor

The crystal structure of TiO₂ strongly influences the physiochemical properties of supported active sites and thus the catalytic performance of the as-synthesized catalyst. Herein, we synthesized TiO₂ with different crystal forms (R = rutile, A = anatase, and B = brookite), which were used as supports to prepare vanadium-based catalysts for Hg⁰ oxidation. The Hg⁰ oxidation efficiency over V₂O₅/TiO₂-B was the best, followed by V₂O₅/TiO₂-A and V₂O₅/TiO₂-R. Further experimental and theoretical results indicate that gaseous Hg⁰ reacts with surface-active chlorine species produced by the adsorbed HCl and the reaction orders of Hg⁰ oxidation over V₂O₅/TiO₂ catalyst with respect to HCl and Hg⁰ concentration were approximately 0 and 1, respectively. The excellent Hg⁰ oxidation efficiency over V₂O₅/TiO₂-B can be attributed to lower redox temperature, larger HCl adsorption capacity, and more oxygen vacancies. This work suggests that to achieve the best simultaneous removal of NO_x and Hg⁰ on state-of-the-art V₂O₅/TiO₂ catalyst, a combination of anatase and brookite TiO₂-supported vanadyl tandem catalysts is supposed to be employed in the SCR reactor, and the brookite-type catalyst should be on the downstream of the anatase-based catalyst due to the inhibition of NH₃ on Hg⁰ oxidation.