Suspect Screening of Liquid Crystal Monomers (LCMs) in Sediment Using an Established Database Covering 1173 LCMs

Unraveling the Pollution and Discharge of Aminophenyl Sulfone Compounds, Sulfonamide Antibiotics, and Their Acetylation Products in Municipal Wastewater Treatment Plants

Aminophenyl sulfone compounds (ASCs) are widely used in various fields, such as the pharmaceutical and textile industries. ASCs and their primary acetylation products are inevitably discharged into the environment. However, the high toxicity of ASCs could be released from the deacetylation of acetylation products. Still, the occurrence and ecological risks of ASCs and their acetylation products remain largely unknown. Here, we integrated all of the existing ASCs based on the core structure, together with their potential acetylation products, to establish a database covering 1105 compounds. By combining the database with R programming, 45 ASCs, sulfonamides, and their acetylation products were identified in the influent and effluent of 19 municipal wastewater treatment plants in 4 cities of China. 13 of them were detected for the first time in the aquatic environment, and 12 acetylation products were newly identified. The cumulative concentrations of 45 compounds in the influent and effluent were in the range of 231-9.96 × 103 and 26-2.70 × 103 ng/L, respectively. The proportion of the unrecognized compounds accounted for 60.6% of the influent and 62.8% of the effluent. Furthermore, nearly half of the ASCs (46.7%), other sulfonamides (49.9%), and their acetylation products (46.2%) were discharged from the effluent, posing a low-to-medium risk to aquatic organisms. The results provide a guideline for future monitoring programs, particularly for sulfadiazine and dronedarone, and emphasize that the ecological risk of ASCs, sulfonamides, and their acetylation products needs to be considered in the aquatic environment.

A new approach to monitoring typical organophosphorus compounds (OPs) in environmental media: From database building to suspect screening

Organophosphorus compounds (OPs) are widely used as flame retardants (FRs) and plasticizers, yet strategies for comprehensively screening of suspect OPs in environmental samples are still lacking. In this work, a neoteric, robust, and general suspect screening technique was developed to identify novel chemical exposures by use of ultra-high performance liquid chromatography-Q Exactive hybrid quadrupole-Orbitrap high resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS). We firstly established a suspect chemical database which had 7,922 OPs with 4,686 molecular formulas, and then conducted suspect screening in n = 50 indoor dust samples, n = 76 sediment samples, and n = 111 water samples. By use of scoring criteria such as retention time prediction models, we successfully confirmed five compounds by comparison with their authentic standards, and prioritized three OPs candidates including a nitrogen/fluorine-containing compound, that is dimethyl {1H-indol-3-yl[3-(trifluoromethyl)anilino]methyl} phosphonate (DMITFMAMP). Given that the biodegradation half-life values in water (t1/2,w) of DMITFMAMP calculated by EPI Suite is 180 d, it is considered to be potentially persistent. This strategy shows promising potential in environmental pollution assessment, and can be expected to be widely used in future research.

Degradation of conjugated estrogen in visible light-driven intimately coupled photocatalysis and biodegradation system

Visible light-driven intimately coupled photocatalysis and biodegradation (VDICPB) is an efficient technology for removing recalcitrant contaminants, but the degradation pathway on 17β-estradiol 3-Sulfate (E2-3S) is still not clear. In this study, VDICPB based on N-doped TiO2 as a photocatalyst was established to investigate the removal and transformation of E2-3S in synthetic wastewater. VDICPB showed a satisfactory removal efficiency of 97.8 ± 0.4 %, which was much higher than that of independent photocatalysis (84.0 ± 2.2 %) or biodegradation system (71.4 ± 1.8 %). Steroid C/D-rings of E2-3S was broken in VDICPB since the transformation process reached terminal central pathway. Primary metabolites did not accumulate in VDICPB, resulting in a low expression of functional genes. E2-3S was mainly removed by cooperative interaction of photocatalysis and co-metabolism of biofilm. Photocatalysis led to deconjugation and microbes acted to mineralization. This study provides technical reference and theoretical support for the removal of new pollutants.

Characteristic structures of liquid crystal monomers in EI-MS analysis and the potential application in suspect screening

Liquid crystal monomers (LCMs) are of emerging concern due to their ubiquitous presence in indoor and outdoor environments and their potential negative impacts on human health and ecosystems. Suspect screening approaches have been developed to monitor thousands of LCMs that could enter the environment, but an updated suspect list of LCMs is difficult to maintain given the rapid development of material innovations. To facilitate suspect screening for LCMs, in-silico mass fragmentation model and quantitative structure-activity relationship (QSPR) models were applied to predict electron ionization (EI) mass spectra of LCMs. The in-silico model showed limited predictive power for EI mass spectra, while the QSPR models trained with 437 published mass spectra of LCMs achieved an acceptable absolute error of 12 percentage points in predicting the relative intensity of the molecular ion, but failed to predict the mass-to-charge ratio of the base peak. A total of 41 characteristic structures were identified from an updated suspect list of 1606 LCMs. Multi-phenyl groups form the rigid cores of 85% of LCMs and produce 154 characteristic peaks in EI mass spectra. Monitoring the characteristic structures and fragments of LCMs may help identify new LCMs with the same rigid cores as those in the suspect list.

Investigation of the Role of Distances from Liquid Crystal Monomer (LCM) Factories on Distribution of LCMs in Surface Soil Samples

Liquid crystal monomers (LCMs), which are commonly used in electronic device screens, have attracted attention as a potential class of emerging organic pollutants with persistent, bioaccumulative, and toxic (PBT) properties. This study involved the collection of 54 surface soil samples around one LC industrial park at increasing spatial distances within 1 km, 1-3 km, and 3-5 km from the center of the LC industrial park. Our observations revealed the presence of LCMs in 46 of 54 surface soil samples examined. Of the 39 target LCMs, 36 were identified, comprising 14 non-fluorinated and 22 fluorinated LCMs. Nine LCMs were detected at frequencies exceeding 50%, with 3bcHdFB exhibiting the highest detection frequency of 59% in the soil samples. The total LCM concentrations across the 46 sampling locations varied from 0.0072 to 17.24 ng/g dw, with the highest total concentrations at sampling sites within 1 km of the liquid crystal plant, suggesting that manufacturing processes may be a potential source for LCM release into the environment. Differences were observed in the LCM contamination patterns among the three sampling areas. Additionally, we observed a decrease in the median LCM concentration with increasing distance from the center of the LC industrial park. However, no statistically significant differences (p > 0.05) in LCM concentrations were observed across the three distances assessed in this study. This may be owing to the limited variety of target compounds analyzed and the limited number of soil samples. Our results emphasize that further studies on the emissions and pollution characteristics of LCMs during production are warranted.

Accumulation characteristics of liquid crystal monomers in plants: A multidimensional analysis

Liquid crystal monomers (LCMs), identified as emerging contaminations, have been detected in soils and plants, but their accumulation characteristics in plants haven't been studied. Therefore, this study systematically investigated the accumulation characteristics of LCMs in plants from four dimensions (i.e., plant fruit species, soil types, plant growth stages, and LCMs categories) for the first time. The LCMs concentrations (9.96 × 10-4 to 114.608 ng/g) in 22 plant fruits were predicted by the partition-limited model. Grains with the highest lipid content showed the highest LCMs accumulation propensity. Plants grown in paddy soil showed a strong LCMs accumulation capacity. Results showed that the LCMs accumulation capacity in plants from soils decreased when the soil organic matter content increased. A preferential accumulation of LCMs in plant root systems during growth was found by the molecular dynamics simulations. Compared to polychlorinated biphenyls (as the reference contaminants of LCMs), LCMs exhibit higher accumulation in plant roots and lower translocation to shoots. For the fourth dimension, lipophilicity was found to be the main reason of LCMs accumulation by intergraded stepwise linear regression with sensitivity analysis. This is the inaugural research concentrating on LCMs accumulation in plants, providing insights and theoretical guidance for future LCMs management strategies multidimensionally.

Liquid crystal monomers (LCMs) in indoor residential dust from Beijing, China: occurrence and human exposure

Liquid crystal monomers (LCMs) are widely used in electronic devices and emerging as an environmental pollutant, while their occurrence in indoor environments is still less studied. In this study, 32 out of 37 target LCMs were detected in indoor residential dust samples (n = 112) from Beijing, China. Concentrations of Σ32LCMs ranged from 17.8 to 197 ng/g, with a median value of 54.7 ng/g. Fluorinated biphenyls and analogs (FBAs) and cyanobiphenyls and analogs (CBAs), with median concentrations of 22.8 and 15.9 ng/g, respectively, were the main kinds of LCMs. Although 32 LCMs can be detected, four monomers with the highest contamination levels contributed to almost 70% of the total LCMs. Spearman correlation analysis found significant correlations among some monomers, which indicated that they might share similar sources in the residential environment. Estimated daily intakes (EDIs) of LCMs via indoor dust for Beijing residents were calculated, and the results showed that dust ingestion and dermal contact were both main intake pathways to LCMs, and younger people may face higher exposure to LCMs. A comparison to the results of China's total diet study showed that EDIs of LCMs via food consumption might be higher than that via dust intake, while health risks caused by exposure of LCMs for the general population, both through food and dust, were insignificant at present.

Establishment of compound database of emerging antioxidants and high-resolution mass spectrometry screening in lake sediment from Taihu Lake Basin, China

Antioxidants are ubiquitous in various environmental samples, leading to increasing concern regarding their potential risk to environments or humans. However, there is dearth of information regarding the environmental fate of antioxidants and unknown/unexpected antioxidants in the environment. Here, we established a compound database (CDB) containing 320 current-used antioxidants by collecting the chemicals from EPA's functional use database and published documents. Physical-chemical characteristics of these antioxidants were estimated, and 19 ones were considered as persistent and bioaccumulative (P&B) substances. This CDB was further coupled with high resolution mass spectrometry (HRMS) technique, which was employed for suspect screening of antioxidants in extracts of sediments (n = 88) collected from Taihu Lake basin. We screened 119 HRMS features that can match 135 chemical formulas in the CDB, and 20 out of them exhibited the detection frequencies ≥ 90%. The total concentrations of suspect antioxidants in sediments ranged from 6.41 to 830 ng/g dw. Statistical analysis demonstrated that concentrations of suspect antioxidants in Taihu Lake were statistically significantly lower than those in Shihu and Jiulihu Lake, but greater than those from other small lakes. Collectively, this study provided a CDB that could be helpful for further monitoring studies of antioxidant in the environments, and also provided the first evidence regarding the ubiquity of antioxidants in aquatic environment of Taihu Lake basin.

Comprehensive Characterization of Organic Light-Emitting Materials in Breast Milk by Target and Suspect Screening

Organic light-emitting materials (OLEMs) are emerging contaminants in the environment and have been detected in various environment samples. However, limited information is available regarding their contamination within the human body. Here, we developed a novel QuEChERS (quick, easy, cheap, effective, rugged, and safe) method coupled with triple quadrupole/high-resolution mass spectrometry to determine OLEMs in breast milk samples, employing both target and suspect screening strategies. Our analysis uncovered the presence of seven out of the 39 targeted OLEMs in breast milk samples, comprising five liquid crystal monomers and two OLEMs commonly used in organic light-emitting diode displays. The cumulative concentrations of the seven OLEMs in each breast milk sample ranged from ND to 1.67 × 103 ng/g lipid weight, with a mean and median concentration of 78.76 and 0.71 ng/g lipid weight, respectively, which were higher compared to that of typical organic pollutants such as polychlorinated biphenyls and polybrominated diphenyl ethers. We calculated the estimated daily intake (EDI) rates of OLEMs for infants aged 0-12 months, and the mean EDI rates during lactation were estimated to range from 30.37 to 54.89 ng/kg bw/day. Employing a suspect screening approach, we additionally identified 66 potential OLEMs, and two of them, cholesteryl hydrogen phthalate and cholesteryl benzoate, were further confirmed using pure reference standards. These two substances belong to cholesteric liquid crystal materials and raise concerns about potential endocrine-disrupting effects, as indicated by in silico predictive models. Overall, our present study established a robust method for the identification of OLEMs in breast milk samples, shedding light on their presence in the human body. These findings indicate human exposure to OLEMs that should be further investigated, including their health risks.

Liquid crystal monomers in soils near the e-waste recycling site and liquid crystal display manufacturer: Exponential decrease with distance

Liquid crystal monomers (LCMs) have been recognized as contaminants of emerging concerns. E-waste recycling sites and liquid crystal displays (LCDs) manufacturers are supposed to be critical sources. However, information regarding LCM contaminations in soils surrounding these sites are currently unavailable. In this study, soil samples were collected from two distinct areas in South China: e-waste recycling area (n = 36) and LCD manufacturer (n = 41), and 60 target LCMs (including 13 biphenyl and analogs (BAs), 10 cyanobiphenyl and analogs (CBAs), and 37 fluorinated biphenyl and analogs (FBAs)) were determined. The concentrations of LCMs in the soils from near the e-waste recycling area (0.32-18 ng/g, average: 4.2 ng/g) were higher than those surrounding the LCD manufacturer (ND - 7.2 ng/g, average: 1.5 ng/g). The compositional profiles of LCMs in soil samples from these two typical point sources were considerably different. The concentrations of FBAs exponentially decreased with distance from the e-waste recycling park, by >90 % within 2 km. The levels of BAs exhibited a similar exponential decrease with distance from the LCD manufacturer. The inventories of LCMs were estimated to be 21.0 kg in the e-waste recycling area and 10.8 kg in the LCD manufacturer area. Remarkably, the inventory of LCMs in soils from e-waste recycling area was one order of magnitude larger than that of hexabromocyclododecanes (HBCDs) in the same region, and 0.2 to 20 times the annual global emissions of LCMs from discarded LCD panels. More studies are required to elucidate the environmental occurrence, behavior, and fate of LCMs in multimedia environment surrounding typical point sources.

Particle size-dependent and route-specific exposure to liquid crystal monomers in indoor air: Implications for human health risk estimations

In indoor environments, liquid crystal monomers (LCMs) released from display devices is a significant concern, necessitating a comprehensive investigation into their distribution behaviors and potential health risks. Herein, we examined various LCMs in educational and workplace air and compared their associated health risks through inhalation and dermal absorption routes. 4-propyl-4'-vinylbicyclohexyl (3VbcH) and 4,4'-bis(4-propylcyclohexyl) biphenyl (b3CHB) with median concentrations of 101 and 1460 pg m-3, were the predominant LCMs in gaseous and particulate phases, respectively. Composition and concentration of LCMs differed substantially between sampling locations due to the discrepancy in the quantity, types, and brands of electronic devices in each location. Three models were further employed to estimate the gas-particle partitioning of LCMs and compared with the measured data. The results indicated that the HB model exhibited the best overall performance, while the LMY model provided a good fit for LCMs with higher log Koa (>12.48). Monte Carlo simulation was used to estimate and compared the probabilistic daily exposure dose and potential health risks. Inhalation exposure of LCMs was significantly greater than the dermal absorption by approximately 1-2 orders of magnitude, implying that it was the primary exposure route of human exposure to airborne LCMs. However, certain LCMs exhibited comparable or higher exposure levels via the dermal absorption route due to the significant overall permeability coefficient. Furthermore, the particle size was discovered to impact the daily exposure dose, contingent on the particle mass-transfer coefficients and accumulation of LCMs on diverse particle sizes. Although the probabilistic non-carcinogenic risks of LCMs were relatively low, their chronic effects on human beings merit further investigations. Overall, this study provides insights into the contamination and potential health risks of LCMs in indoor environments, underscoring the importance of considering particle sizes and all possible exposure pathways in estimating human health risks caused by airborne organic contaminants.

Aerobic Microbial Transformation of Fluorinated Liquid Crystal Monomer: New Pathways and Mechanism

Fluorinated liquid crystal monomers (FLCMs) have been suggested as emerging contaminants, raising global concern due to their frequent occurrence, potential toxic effects, and endurance capacity in the environment. However, the environmental fate of the FLCMs remains unknown. To fill this knowledge gap, we investigated the aerobic microbial transformation mechanisms of an important FLCM, 4-[difluoro(3,4,5-trifluorophenoxy)methyl]-3, 5-difluoro-4'-propylbiphenyl (DTMDPB), using an enrichment culture termed as BG1. Our findings revealed that 67.5 ± 2.1% of the initially added DTMDPB was transformed in 10 days under optimal conditions. A total of 14 microbial transformation products obtained due to a series of reactions (e.g., reductive defluorination, ether bond cleavage, demethylation, oxidative hydroxylation and aromatic ring opening, sulfonation, glucuronidation, O-methylation, and thiolation) were identified. Consortium BG1 harbored essential genes that could transform DTMDPB, such as dehalogenation-related genes [e.g., glutathione S-transferase gene (GST), 2-haloacid dehalogenase gene (2-HAD), nrdB, nuoC, and nuoD]; hydroxylating-related genes hcaC, ubiH, and COQ7; aromatic ring opening-related genes ligB and catE; and methyltransferase genes ubiE and ubiG. Two DTMDPB-degrading strains were isolated, which are affiliated with the genus Sphingopyxis and Agromyces. This study provides a novel insight into the microbial transformation of FLCMs. The findings of this study have important implications for the development of bioremediation strategies aimed at addressing sites contaminated with FLCMs.

Aquatic toxicity, ecological effects, human exposure pathways and health risk assessment of liquid crystal monomers

Liquid crystal monomers (LCMs), one of the key materials for liquid crystal displays, have been considered as emerging pollutants in recent years. However, the environmental behaviors of LCMs have not yet been well investigated. The toxicity data of 1173 LCMs were calculated by integrated computational simulation methods in this study. It showed that 64.6% LCMs exhibited PBT (persistent, bioaccumulative, and toxic) properties. Based on the results, 1173 LCMs were identified as molecules possessing the highest level of acute toxicity to aquatic organisms. Among which, and a human health risk priority control list about LCMs was generated in this study, among which 435 were classified as requiring priority control LCMs. It was confirmed that LCMs could eventually accumulate in the human body along the aquatic food chain or penetrate the bloodstream through the dermis, thereby causing harm to health by identifying the exposure pathways of LCMs in humans. Additionally, the electronegativity of the side chain group of LCMs is the main factor causing toxicity differences; therefore, the LCMs containing halogens presented significant acute and chronic toxic effects. This study provided a more comprehensive understanding of LCMs for the public and scientific strategies for controlling LCMs.

Occurrence, behavior and fate of liquid crystal monomers in municipal wastewater

Liquid crystal monomers (LCMs), the essential substances used in the display screen of electronic devices, have been proposed as a class of emerging chemicals of concern. Despite their detection in various environmental matrices, little is known about the presence of LCMs in municipal sewage systems. This study aimed to investigate the occurrence, distribution, and fate of 64 LCMs released into the aqueous environment from a municipal wastewater treatment plant (WWTP) in Hong Kong, China. In total 14 LCMs were detected in WWTP samples. Specifically, the Σ14LCMs concentrations in crude influent, final effluent, and final sludge were found to be 16.8 ± 0.3 ng/L, 2.71 ± 0.05 ng/L, and 19.2 ± 1.0 ng/g dry weight, respectively. Among them, 10 fluorinated LCMs (F-LCMs) were determined to be present at concentrations of 8.90 ± 0.10 ng/L, 1.69 ± 0.05 ng/L, and 9.94 ± 1.00 ng/g dry weight, respectively. The predominant non-fluorinated LCMs (NF-LCMs) detected in all samples were 3OCB and EPhEMOB, while 2OdF3B was the dominant F-LCM. The overall removal rate of total LCMs was 83.8 ± 0.3 %, with 25.4 ± 4.8 % being removed by biodegradation and UV treatment. Compared to NF-LCMs, F-LCMs were more resistant to biodegradation. Despite the significant removal of LCMs through WWTP, the remaining LCMs in final effluent could result in an annual emission of 3.04 kg of total LCMs from the population of Hong Kong. This study provides the first evidence of LCMs contamination in municipal wastewater, possibly arising from routine electronic devices usage. Further investigation is needed to elucidate the potential impact of LCMs emission via WWTP effluent on the aquatic receiving ecosystem.

A review of liquid crystal monomers: Environmental occurrence, degradation, toxicity, and human exposure of an emerging class of E-waste pollutants

Liquid crystal monomers (LCMs) are a class of organic compounds with diphenyl or dicyclohexane as the skeleton structure, which are widely used in the manufacturing of liquid crystal displays. They are recognized as novel organic compounds with persistence, bioaccumulation, toxicity, and potential for long-range transport. LCMs are inevitably released into the environment throughout the life cycle of electronic products, and their presence has been found in various abiotic matrixes (air, dust, sediment, leachate, soil) and biotic matrixes (aquatic organisms, human serum, and human skin wipe). Given that studies on LCMs are still in their infancy, this review comprehensively summarizes the extensive literature data on LCMs and identifies key knowledge gaps and future research needs. The physicochemical properties, production, and usage of LCMs are described. Their environmental distribution, degradation, toxicity, and human exposure are also discussed based on the available data and results. Existing data show that LCMs have large-scale environmental pollution and may pose potential ecological and health risks, but it is still insufficient to accurately assess their risks due to the lack of knowledge on LCMs in many areas, such as global contamination trend, environmental behavior, toxic effects, and human exposure assessment. We believe that future studies of LCMs need to investigate LCMs pollution on a large geographic scale, explore their sources, behavior, and fate in the environment, and assess their potential health hazards to organisms and humans.

Identification and Prioritization of Environmental Organic Pollutants: From an Analytical and Toxicological Perspective

Exposure to environmental organic pollutants has triggered significant ecological impacts and adverse health outcomes, which have been received substantial and increasing attention. The contribution of unidentified chemical components is considered as the most significant knowledge gap in understanding the combined effects of pollutant mixtures. To address this issue, remarkable analytical breakthroughs have recently been made. In this review, the basic principles on recognition of environmental organic pollutants are overviewed. Complementary analytical methodologies (i.e., quantitative structure-activity relationship prediction, mass spectrometric nontarget screening, and effect-directed analysis) and experimental platforms are briefly described. The stages of technique development and/or essential parts of the analytical workflow for each of the methodologies are then reviewed. Finally, plausible technique paths and applications of the future nontarget screening methods, interdisciplinary techniques for achieving toxicant identification, and burgeoning strategies on risk assessment of chemical cocktails are discussed.

Tunable Fluorine-Functionalized Scholl-Coupled Microporous Polymer for the Selective Adsorption and Ultrasensitive Analysis of Environmental Liquid-Crystal Monomers

Liquid-crystal monomers (LCMs), especially fluorinated biphenyls and analogues (FBAs), are identified to be an emerging generation of persistent organic pollutants. However, there is a dearth of information about their occurrence and distribution in environmental water and lacustrine soil samples. Herein, a series of fluorine-functionalized Scholl-coupled microporous polymers (FSMP-X, X = 1-3) were designed and synthesized for the highly efficient and selective enrichment of FABs. Their hydrophobicity, porosity, chemical stability, and adsorption performance (capacity, rate, and selectivity) were regulated preciously. The best-performing material (FSMP-2) was employed as the on-line fluorous solid-phase extraction (on-line FSPE) adsorbent owing to its high adsorption capacity (313.68 mg g^-1), fast adsorption rate (1.05 g h^-1), and specific selectivity for FBAs. Notably, an enrichment factor of up to 590.2 was obtained for FSMP-2, outperforming commercial C₁₈ (12.6-fold). Also, the underlying adsorption mechanism was uncovered by density functional theory calculations and experiments. Based on this, a novel and automated on-line FSPE-high-performance liquid chromatography method was developed for ultrasensitive (detection limits: 0.0004-0.0150 ng mL^-1) and low matrix effect (73.79-113.3%) determination of LCMs in lake water and lacustrine soils. This study offers new insight into the highly selective quantification of LCMs and the first evidence for their occurrence and distribution in these environmental samples.

Environmental behaviors of emerging contaminants in freshwater ecosystem dominated by submerged plants: A review

Persistent exposure of emerging contaminants (ECs) in freshwater ecosystem has initiated intense global concerns. Freshwater ecosystem dominated by submerged plants (SP-FES) has been widely constructed to control eutrophic water. However, the environmental behaviors (e.g. migration, transformation, and degradation) of ECs in SP-FES have rarely been concerned and summarized. This review briefly introduced the sources of ECs, the pathways of ECs entering into SP-FES, and the constituent elements of SP-FES. And then the environmental behaviors of dissolved ECs and refractory solid ECs in SP-FES were comprehensively summarized, and the feasibility of removing ECs from SP-FES was critically evaluated. Finally, the challenges and perspectives on the future development for ECs removal from SP-FES were prospected, giving possible research gaps and key directions. This review will provide theoretical and technical support for the effective removal of ECs in freshwater ecosystem, especially in SP-FES.

Percutaneous Penetration of Liquid Crystal Monomers (LCMs) by In Vitro Three-Dimensional Human Skin Equivalents: Possible Mechanisms and Implications for Human Dermal Exposure Risks

Liquid crystal monomers (LCMs) are indispensable materials in liquid crystal displays, which have been recognized as emerging persistent, bioaccumulative, and toxic organic pollutants. Occupational and nonoccupational exposure risk assessment suggested that dermal exposure is the primary exposure route for LCMs. However, the bioavailability and possible mechanisms of dermal exposure to LCMs via skin absorption and penetration remain unclear. Herein, we used EpiKutis 3D-Human Skin Equivalents (3D-HSE) to quantitatively assess the percutaneous penetration of nine LCMs, which were detected in e-waste dismantling workers' hand wipes with high detection frequencies. LCMs with higher log K_ow and greater molecular weight (MW) were more difficult to penetrate through the skin. Molecular docking results showed that ABCG2 (an efflux transporter) may be responsible for percutaneous penetration of LCMs. These results suggest that passive diffusion and active efflux transport may be involved in the penetration of LCMs across the skin barrier. Furthermore, the occupational dermal exposure risks evaluated based on the dermal absorption factor suggested the underestimation of the continuous LCMs' health risks via dermal previously.

Predicted health and environmental hazards of liquid crystal materials via quantitative structure-property relationship modeling

Liquid crystal materials (LCMs) are considered as emerging contaminants with high persistent and bioaccumulative potentials, but their toxicological effects are not well understood. To address this issue, a list of 1431 LCMs commercially available in the market was established through literature reviews and surveys of LCM suppliers. Toxicological properties of 221 target LCMs were derived from the Classification and Labeling Inventory by the European Chemicals Agency. More than 80 % of target LCMs likely pose adverse effects on human health or aquatic ecosystems. Two quantitative structure-property relationship (QSPR) models developed from the toxicological properties of LCMs achieved approximately 90 % accuracy in external data sets. The probability-based approach was more efficient in defining the applicability domain for the QSPR models than a range- or distance-based approach. The highest accuracy was achieved for chemicals within the probability-based applicability domain. The QSPR models were applied to predict health and environmental hazards of 1210 LCMs that had not been notified to the Classification and Labeling Inventory, and 301 and 94 LCMs were recognized as posing potential hazards to human health and the environment, respectively. The present study highlights the potential detrimental effects of LCMs and offers a specific in silico technique for screening hazardous LCMs.

Liquid Crystal Monomer: A Potential PPARγ Antagonist

Liquid crystal monomers (LCMs) are a large family of artificial ingredients that have been widely used in global liquid crystal display (LCD) industries. As a major constituent in LCDs as well as the end products of e-waste dismantling, LCMs are of growing research interest with regard to their environmental occurrences and biochemical consequences. Many studies have analyzed LCMs in multiple environmental matrices, yet limited research has investigated the toxic effects upon exposure to them. In this study, we combined in silico simulation and in vitro assay validation along with omics integration analysis to achieve a comprehensive toxicity elucidation as well as a systematic mechanism interpretation of LCMs for the first time. Briefly, the high-throughput virtual screen and reporter gene assay revealed that peroxisome proliferator-activated receptor gamma (PPARγ) was significantly antagonized by certain LCMs. Besides, LCMs induced global metabolome and transcriptome dysregulation in HK2 cells. Notably, fatty acid β-oxidation was conspicuously dysregulated, which might be mediated through multiple pathways (IL-17, TNF, and NF-kB), whereas the activation of AMPK and ligand-dependent PPARγ antagonism may play particularly important parts. This study illustrated LCMs as a potential PPARγ antagonist and explored their toxicological mode of action on the trans-omics level, which provided an insightful overview in future chemical risk assessment.

Target and suspect analysis of liquid crystal monomers in soil from different urban functional zones

Recent studies have reported the occurrence of liquid crystal monomers (LCMs) in sediment, indoor dust, hand wipes, and human serum samples; however, information regarding their contamination status in soil is currently unavailable. The concentrations of 39 target LCMs were determined in n = 96 surface soil samples collected from five different urban functional zones including agricultural, scenic, industrial, commercial, and residential zones. We observed that 76 of 96 surface soil samples contained at least 19, 13, 16, 19, and 14 of the 39 target LCMs that were detectable in samples from agricultural, scenic, industrial, commercial, and residential zones, respectively. The LCMs in the samples from the agricultural zone exhibited the highest mean concentrations of 12.9 ng/g dry weight (dw), followed by those from commercial (5.23 ng/g dw), residential (3.30 ng/g dw), industrial (2.48 ng/g dw), and scenic zones (0.774 ng/g dw). Furthermore, strong and statistically significant (p < 0.05) correlations were observed for several pairs of LCMs (3cH2B vs. 5bcHdFB in the agricultural zone; 5bcHdFB vs. 2bcHdFB, 5bcHdFB vs. 3cH2B in the commercial zone; 5bcHdFB vs. 2bcHdFB in the industrial zone), indicating that they might have similar commercial applications and sources. Based on a newly established database containing 1173 LCMs, suspect screening was applied to discover other LCMs in these 96 soil samples using gas chromatograph coupled with quadrupole-time-of-flight mass spectrometry (GC-QTOF/MS). We tentatively identified 51 LCM formulas with 69 chemical structures. Collectively, this study provides the first evidence for the occurrence of LCMs in soil samples, and suggests that LCMs could be widely distributed across all five urban functional zones.

Direct evidence on occurrence of emerging liquid crystal monomers in human serum from E-waste dismantling workers: Implication for intake assessment

Liquid crystal monomers (LCMs) are widely used chemicals and ubiquitous emerging organic pollutants in the environment, some of which have persistent, bio-accumulative, and toxic potentials. Elevated levels of LCMs have been found in the e-waste dismantling associated areas. However, information on their internal exposure bio-monitoring is scarce. For the first time, occurrences of LCMs were observed in the serum samples of occupational workers (n = 85) from an e-waste dismantling area in South China. Twenty-nine LCMs were detected in serum samples of the workers, with a median value of 35.2 ng/mL (range: 7.78-276 ng/mL). Eight noticed LCMs were found to have relatively high detection frequencies ranging from 52.9% to 96.5%. The correlation analysis of individual LCMs indicated potential common applications and similar sources to the LCMs in occupational workers. Fluorinated LCMs were identified as the predominant monomers in the workers. Additionally, the estimated daily intake of the LCMs in the occupational workers was significantly higher than those in residents from the reference areas (p < 0.05, Mann-Whitney U Test, median values: 1.46 ng/kg bw/day versus 0.40 ng/kg bw/day), indicating a substantially higher exposure level to e-waste dismantling workers.