Dielectrophoresis-Based Universal Membrane Antifouling Strategy toward Colloidal Foulants

Electric Demulsification Membrane Technology for Confined Separation of Oil-Water Emulsions

Demulsification technology for separation of oil-water (O/W) emulsions, especially those stabilized by surfactants, is urgently needed yet remains highly challenging due to their inherent stability characteristics. Electrocoalescence has emerged as a promising solution owing to its simplicity, efficacy, and versatility, yet hindered by substantial energy consumption (e.g., >50 kWh/m3) along with undesirable Faradic reactions. Herein, we propose an innovative electric demulsification technology that leverages conductive membrane microchannels to confine oil droplets from the oil-water emulsion for achieving high energy-efficient coalescence of oil droplets. The proposed system reduces the required voltage down to 12 V, 2 orders of magnitude lower than that of conventional electrocoalescence systems, while achieving a similar separation efficacy of 91.4 ± 3.0% at a low energy consumption (3 kWh/m3) and an ultrahigh permeability >3000 L/(m2·h·bar). In situ fluorescence microscopy combined with COMSOL simulations provided insight into the fundamental mechanistic steps of an electric demulsification process confined to membrane microchannels: (1) rapid electric-field redistribution of oil droplet surfactant molecules, (2) enhanced collision probability due to confined oil droplet concentration under dielectrophoretic forces, and (3) increased collision efficacy facilitated by the membrane pore structure. This strategy may revolutionize the next generation of demulsification and oil-water separation innovations.

Pressure-induced piezoelectric response for mitigating membrane fouling in surface water treatment: Insights from continuous operation and biofouling characterization

Organic fouling and biofouling represents a critical challenge encountered by the membrane-based water treatment process. Herein, a piezoelectric PVDF membrane (PEM), capable of generating electrical responses to hydraulic pressure stimuli, was synthesized and employed for mitigating the fouling in surface water treatment. The surface-hydrophobilized PEM demonstrated sensitive and enhanced underwater output performance in response to increasing transmembrane pressure (TMP) during constant-flux filtration, with signals reaching up to ∼800 mV at a TMP of ∼80 kPa. This in-situ piezoelectric response significantly reduced TMP growth in both short-term (1 h) and long-term (15 days) filtration trials, demonstrating a strong capability to mitigate membrane fouling. Moreover, continuous piezoelectric stimulation effectively inhibited microbial activity and the accumulation of extracellular polymeric substances (EPS) on PEM surface, surpassing the dominant electrokinetic repulsion mechanisms observed in short-term trials. Microbial community analysis suggests that this evolution is primarily due to the targeted impact of piezoelectric stimulation on microbial metabolic behavior. The piezoelectric-induced electrical microenvironment inhibited the growth of microbes associated with high EPS production while promoting the proliferation of electrically active microbes involved in biopolymer digestion. In addition, the PEM demonstrated enhanced permeate quality throughout the filtration process, with DOC and UV254 removal rates increasing from 11.7 % and 15.6 % initially to 28.6 % and 19.5 % by the 15th day, respectively. Given the performance and self-powered capability of PEM compared to current electrified antifouling methods that require an external power supply, these attributes are anticipated to hold practical significance in developing innovative and energy-efficient strategies for mitigating both organic fouling and biofouling.

Durable Nano-Flower Structured Foam Coupled with Electrically-Driven in Situ Aeration Enable High-Flux Oil/Water Emulsion Separation with Dynamic Antifouling Ability

The conventional membranes used for separating oil/water emulsions are typically limited by the properties of the membrane materials and the impact of membrane fouling, making continuous long-term usage unachievable. In this study, a filtering electrode with synchronous self-cleaning functionality is devised, exhibiting notable antifouling ability and an extended operational lifespan, suitable for the continuous separation of oil/water emulsions. Compared with the original Ti foam, the in situ growth of NiTi-LDH (Layered double hydroxide) nano-flowers endows the modified Ti foam (NiTi-LDH/TF) with exceptional superhydrophilicity and underwater superoleophobicity. Driven by gravity, a rejection rate of over 99% is achieved for various emulsions containing oil content ranging from 1% to 50%, as well as oil/seawater emulsions. The flux recovery rate exceeds 90% after one hundred cycles and a 4-h filtration period. The enhanced separation performance is realized through the "gas bridge" effect during in situ aeration and electrochemical anodic oxidation. The internal aeration within the membrane pores contributes to the removal of oil foulants. This study underscores the potential of coupling foam metal filtration materials with electrochemical technology, providing a paradigm for the exploration of novel oil/water separation membranes.

Recent Advances in Dielectrophoretic Manipulation and Separation of Microparticles and Biological Cells

Dielectrophoresis (DEP) is an advanced microfluidic manipulation technique that is based on the interaction of polarized particles with the spatial gradient of a non-uniform electric field to achieve non-contact and highly selective manipulation of particles. In recent years, DEP has made remarkable progress in the field of microfluidics, and it has gradually transitioned from laboratory-scale research to high-throughput manipulation in practical applications. This paper reviews the recent advances in dielectric manipulation and separation of microparticles and biological cells and discusses in detail the design of chip structures for the two main methods, direct current dielectrophoresis (DC-DEP) and alternating current dielectrophoresis (AC-DEP). The working principles, technical implementation details, and other improved designs of electrode-based and insulator-based chips are summarized. Functional customization of DEP systems with specific capabilities, including separation, capture, purification, aggregation, and assembly of particles and cells, is then performed. The aim of this paper is to provide new ideas for the design of novel DEP micro/nano platforms with the desired high throughput for further development in practical applications.

Piezoceramic membrane with built-in ultrasound for reactive oxygen species generation and synergistic vibration anti-fouling

Piezoceramic membranes have emerged as a prominent solution for membrane fouling control. However, the prevalent use of toxic lead and limitations of vibration-based anti-fouling mechanism impede their wider adoption in water treatment. This study introduces a Mn/BaTiO3 piezoceramic membrane, demonstrating a promising in-situ anti-fouling efficacy and mechanism insights. When applied to an Alternating Current at a resonant frequency of 20 V, 265 kHz, the membrane achieves optimal vibration, effectively mitigating various foulants such as high-concentration oil (2500 ppm, including real industrial oil wastewater), bacteria and different charged inorganic colloidal particles, showing advantages over other reported piezoceramic membranes. Importantly, our findings suggest that the built-in ultrasonic vibration of piezoceramic membranes can generate reactive oxygen species. This offers profound insights into the distinct anti-fouling processes for organic and inorganic wastewater, supplementing and unifying the traditional singular vibrational anti-fouling mechanism of piezoceramic membranes, and potentially propelling the development of piezoelectric catalytic membranes.

Membrane processes enhanced by various forms of physical energy: A systematic review on mechanisms, implementation, application and energy efficiency

Membrane technologies in water and wastewater treatment have been eagerly pursued over the past decades, yet membrane fouling remains the major bottleneck to overcome. Membrane fouling control methods which couple membrane processes with online in situ application of external physical energy input (EPEI) are getting closer and closer to reality, thanks to recent advances in novel materials and energy deliverance methods. In this review, we summarized recent studies on membrane fouling control techniques that depend on (i) electric field, (ii) acoustic field, (iii) magnetic field, and (iv) photo-irradiation (mostly ultraviolet or visible light). Mechanisms of each energy input were first reported, which defines the applicability of these methods to certain wastewater matrices. Then, means of implementation were discussed to evaluate the compatibility of these fouling control methods with established membrane techniques. After that, preferred applications of each energy input to different foulant types and membrane processes in the experiment reports were summarized, along with a discussion on the trends and knowledge gaps of such fouling control research. Next, specific energy consumption in membrane fouling control and flux enhancement was estimated and compared, based on the experimental results reported in the literature. Lastly, strength and weakness of these methods and future perspectives were presented as open questions.

Insulated Interlaced Surface Electrodes for Bacterial Inactivation and Detachment

Effective and stable antibiofouling surfaces and interfaces have long been of research interest. In this study, we designed, fabricated, and evaluated a surface coated with insulated interlaced electrodes for bacterial fouling reduction. The electrodes were printed Ag filaments of 100 μm width and 400 μm spacing over an area of 2 × 2 cm². The insulating Ag electrode coating material was polydimethylsiloxane (PDMS) or thermoplastic polyurethane (TPU) with a thickness of 10 to 40 μm. To evaluate the antibiofouling potential, E. coli inactivation after 2 min contact with the electrified surface and P. fluorescens detachment after 15 and 40 h growth were examined. The extent of bacterial inactivation was related to the insulating material, coating thickness, and applied voltage (magnitude and AC vs DC). A high bacterial inactivation (>98%) was achieved after only 2 min of treatment at 50 V AC and 10 kHz using a 10 μm TPU coating. P. fluorescens detachment after 15 and 40 h incubation in the absence of applied potential was completed with simultaneous cross-flow rinsing and AC application. Higher AC voltages and longer cross-flow rinsing times resulted in greater bacterial detachment with bacterial coverage able to be reduced to <1% after only 2 min of rinsing at 50 V AC and 10 kHz. Theoretical electric field analysis indicated that at 10 V the field strength penetrating the aqueous solution is nonuniform (∼16,000-20,000 V m^-1 for the 20 μm TPU) and suggests that dielectrophoresis plays a key role in bacterial detachment. The bacterial inactivation and detachment trends observed in this study indicate that this technique has merit for future antibiofouling surface development.

Surface Engineering of a Bioartificial Membrane for Its Application in Bioengineering Devices

Membrane technology is playing a crucial role in cutting-edge innovations in the biomedical field. One such innovation is the surface engineering of a membrane for enhanced longevity, efficient separation, and better throughput. Hence, surface engineering is widely used while developing membranes for its use in bioartificial organ development, separation processes, extracorporeal devices, etc. Chemical-based surface modifications are usually performed by functional group/biomolecule grafting, surface moiety modification, and altercation of hydrophilic and hydrophobic properties. Further, creation of micro/nanogrooves, pillars, channel networks, and other topologies is achieved to modify physio-mechanical processes. These surface modifications facilitate improved cellular attachment, directional migration, and communication among the neighboring cells and enhanced diffusional transport of nutrients, gases, and waste across the membrane. These modifications, apart from improving functional efficiency, also help in overcoming fouling issues, biofilm formation, and infection incidences. Multiple strategies are adopted, like lysozyme enzymatic action, topographical modifications, nanomaterial coating, and antibiotic/antibacterial agent doping in the membrane to counter the challenges of biofilm formation, fouling challenges, and microbial invasion. Therefore, in the current review, we have comprehensibly discussed different types of membranes, their fabrication and surface modifications, antifouling/antibacterial strategies, and their applications in bioengineering. Thus, this review would benefit bioengineers and membrane scientists who aim to improve membranes for applications in tissue engineering, bioseparation, extra corporeal membrane devices, wound healing, and others.