Estimating the Mass of Pharmaceuticals Harbored in Municipal Solid Waste Landfills by Analyzing Refuse Samples at Various Ages and Depths

A picture of pharmaceutical pollution in landfill leachates: Occurrence, regional differences and influencing factors

Municipal solid waste (MSW) landfill sites have been identified as a significant source of pharmaceuticals in the environment because unused or expired pharmaceuticals are discarded into MSW, which eventually percolate into leachates. However, the contamination of pharmaceuticals in landfill leachate in China is not comprehensively understood. Previous research into factors influencing pharmaceutical concentrations focused on a limited number and type of target pollutants or restricted study area. In the present study, 66 pharmaceuticals were analyzed (including 45 antibiotic and 21 non-antibiotic pharmaceuticals, also categorized as 59 prescription and 7 non-prescription pharmaceuticals) in leachate samples from landfill sites with various characteristics in different regions of China. The results indicated that non-antibiotic pollutants were present at significantly higher concentrations than antibiotic pollutants, with median concentrations of 1.74 μg/L and 527 ng/L, respectively. Non-antibiotic pollutants also presented a higher environmental risk than antibiotic pollutants, by 2 to 4 orders of magnitude, highlighting that non-antibiotic pharmaceuticals should not be overlooked during the assessment of landfill leachate. Pharmaceutical concentrations in landfill leachate samples exhibited regional differences; the population size served by the landfills was the dominant factor contributing to the observed differences. In addition, landfill characteristics such as the solid waste composition and MSW loading can also affect pharmaceutical concentrations in landfill leachate. Despite the implementation of the classification and disposal policy of MSW in Shanghai, China since July 2019, specifying that unused or expired pharmaceuticals should be discarded as hazardous waste, high levels of pharmaceutical contaminations were detected in leachate from the main components of classified MSW (i.e., residual and food waste). These findings emphasize the importance of pharmaceutical management in solid waste systems.

Selective formation of high-valent iron in Fenton-like system for emerging contaminants degradation under near-neutral and high-salt conditions

In view of the near-neutral and high-salt conditions, the Fenton technology with hydroxyl radicals (HO•) as the main reactive species is difficult to satisfy the removal of trace emerging contaminants (ECs) in pharmaceutical sewage. Here, a layered double hydroxide FeZn-LDH was prepared, and the selective formation of ≡Fe(IV)=O in Fenton-like system was accomplished by the chemical environment regulation of the iron sites and the pH control of the microregion. The introduced zinc can increase the length of Fe-O bond in the FeZn-LDH shell layer by 0.22 Å compared to that in Fe2O3, which was conducive to the oxygen transfer process between ≡Fe(III) and H2O2, resulting in the ≡Fe(IV)=O formation. Besides, the amphoteric hydroxide Zn(OH)2 can regulate the pH of the FeZn-LDH surface microregion, maintaining reaction pH at around 6.5-7.5, which could avoid the quenching of ≡Fe(IV)=O by H+. On the other hand, owing to the anti-interference of ≡Fe(IV)=O and the near-zero Zeta potential on the FeZn-LDH surface, the trace ECs can also be effectively degraded under high-salt conditions. Consequently, the process of ≡Fe(IV)=O generation in FeZn-LDH system can satisfy the efficient removal of ECs under near-neutral and high-salt conditions.

Global landfill leachate characteristics: Occurrences and abundances of environmental contaminants and the microbiome

Landfill leachates are complex mixtures containing very high concentrations of biodegradable and recalcitrant toxic compounds. Understanding the major contaminant components and microbial community signatures in global landfill leachates is crucial for timely decision-making regarding contaminant management and treatment. Therefore, this study analyzed leachate data from 318 landfill sites primarily used for municipal solid waste disposal, focusing on their chemical and microbiological characteristics. The most prevalent and dominant components in landfill leachates are the chemical oxygen demand (COD, 3.7-75.9 × 103 mg/L) and NH4+ (0.03-0.81 × 104 mg/L), followed by salt species such as SO42- (0.03-5.25 × 103 mg/L), Cl- (3.2-7.8 × 103 mg/L), K+ (0.58-4.20 × 103 mg/L), Na+ (1.3-13.0 × 103 mg/L) and Ca2+ (2.35-230.23 × 103 mg/L), which exhibit significant fluctuations. Heavy metals and metalloids are widely distributed in most landfill leachates but at relatively low concentrations (<182.8 mg/L) compared to conventional parameters. Importantly, there is a distinct global variation in the occurrence of emerging environmental contaminants (ECs). Among these compounds, perfluorooctanoic acid (PFOA, 0.02-7.50 × 103 μg/L) of per- and poly-fluoroalkyl substances (PFAS), bisphenol A (BPA, 0.01-33.46 × 103 μg/L) belonged to endocrine-disrupting compounds (EDCs), together with di-ethyltoluamide (DEET, 1.0-1.0 × 103 μg/L) affiliated to pharmaceuticals and personal care products (PPCPs) are the most frequently detected in landfill leachates. Additionally, the microbial community compositions in most leachates are primarily dominated by Proteobacteria, Bacteroidota, Firmicutes, and Chloroflexi, and some of their abundances are correlated with the concentrations of NH4+, NO3-, Cl-, Na+ and Cr. Notably, the leading microbes driving advanced removal of inorganic nitrogen in the treatment systems are Candidatus Brocadia (anammox), denitrifying Thauera, nitrite-oxidizing bacteria Nitrospira, along with ammonia-oxidizing bacteria Nitrosomonas and Nitrosospira. The findings of this work provide a deeper insight into the leachate characteristics and the sustainable management of landfill leachates, especially presenting a snapshot of the global distribution of pollutants and also the microbiome.

2D Fluorinated Graphene Oxide (FGO)-Polyethyleneimine (PEI) Based 3D Porous Nanoplatform for Effective Removal of Forever Toxic Chemicals, Pharmaceutical Toxins, and Waterborne Pathogens from Environmental Water Samples

Although water is essential for life, as per the United Nations, around 2 billion people in this world lack access to safely managed drinking water services at home. Herein we report the development of a two-dimensional (2D) fluorinated graphene oxide (FGO) and polyethylenimine (PEI) based three-dimensional (3D) porous nanoplatform for the effective removal of polyfluoroalkyl substances (PFAS), pharmaceutical toxins, and waterborne pathogens from contaminated water. Experimental data show that the FGO-PEI based nanoplatform has an estimated adsorption capacity (qm) of ∼219 mg g-1 for perfluorononanoic acid (PFNA) and can be used for 99% removal of several short- and long-chain PFAS. A comparative PFNA capturing study using different types of nanoplatforms indicates that the qm value is in the order FGO-PEI > FGO > GO-PEI, which indicates that fluorophilic, electrostatic, and hydrophobic interactions play important roles for the removal of PFAS. Reported data show that the FGO-PEI based nanoplatform has a capability for 100% removal of moxifloxacin antibiotics with an estimated qm of ∼299 mg g-1. Furthermore, because the pore size of the nanoplatform is much smaller than the size of pathogens, it has a capability for 100% removal of Salmonella and Escherichia coli from water. Moreover, reported data show around 96% removal of PFAS, pharmaceutical toxins, and pathogens simultaneously from spiked river, lake, and tap water samples using the nanoplatform.