Power of Plankton: Effects of Algal Biodiversity on Biocrude Production and Stability

Cultivation of flocculated microalgal-bacterial consortia using fluidised carriers for wastewater treatment and renewable energy production

Microalgal-bacterial consortia (MBC) and microalgal consortia (MC) were cultivated with primary and final treated wastewaters, respectively, using a fluidised carrier. This study determines the main factors and operations required for flocculating suspended MBC (SMBC) and MC (SMC) in cultures. The flocculated SMBC and SMC with good settleability require the detachment of thickened MBC or MC on the carrier and suppressed SMBC and SMC formation by the original MBC and MC grown in the culture. Flocculation was achieved by controlling the carrier and culture replacements. A carrier replacement ratio of 0.04 d-1 and a culture replacement ratio of 0.95 d-1 minimised the dissolved organic carbon (15.3 mg-C/L) and SMBC residue (7.3 mg/L). Thus, treating primary treated wastewater with MBC formed using fluidised carriers is a promising strategy, enabling the use of whole cells in MBC for renewable energy production.

Understanding phycosomal dynamics to improve industrial microalgae cultivation

Algal-bacterial interactions are ubiquitous in both natural and industrial systems, and the characterization of these interactions has been reinvigorated by potential applications in biosystem productivity. Different growth conditions can be used for operational functions, such as the use of low-quality water or high pH/alkalinity, and the altered operating conditions likely constrain microbial community structure and function in unique ways. However, research is necessary to better understand whether consortia can be designed to improve the productivity, processing, and sustainability of industrial-scale cultivations through different controls that can constrain microbial interactions for maximal light-driven outputs. The review highlights current knowledge and gaps for relevant operating conditions, as well as suggestions for near-term and longer-term improvements for large-scale cultivation and polyculture engineering.

Impacts of Fungal Disease on Algal Biofuel Systems: Using Life Cycle Assessment to Compare Control Strategies

While climate change has incentivized attention on sustainable fuel sources, algae has positioned itself as a both promising and problematic biofuel feedstock. Diseases such as fungal pathogens cause costly algal feedstock crashes, but the life cycle assessments (LCAs) used to analyze the viability of algal feedstocks for biofuel have yet to consider the impact of disease on life cycle metrics. Here, we incorporate a disease model into a well-documented LCA for algal biorefineries to compare two sustainability metrics, energy return on investment (EROI) and global warming potential (GWP). We begin by showing that failure to consider disease leads to overly optimistic LCA metric outputs. Then, we compare two leading control strategies of disease─chemical and biological. Our analyses show that biological engineering of a multispecies consortium of algae has a greater positive impact on LCA metrics than chemical control of the fungal pathogen using a fungicide. We expand how and when bi-cultures might advantageously exhibit the "dilution effect" whereby differentially susceptible species exhibit compensatory dynamics that stabilize feedstock production. Our results emphasize the impact of disease and suggest that multispecies consortia of algae can be biologically engineered to reduce greenhouse gas emissions and improve the economic viability of biofuel.

Translating advances in microbial bioproduction to sustainable biotechnology

Advances in synthetic biology have radically changed our ability to rewire microorganisms and significantly improved the scalable production of a vast array of drop-in biopolymers and biofuels. The success of a drop-in bioproduct is contingent on market competition with petrochemical analogues and weighted upon relative economic and environmental metrics. While the quantification of comparative trade-offs is critical for accurate process-level decision making, the translation of industrial ecology to synthetic biology is often ambiguous and assessment accuracy has proven challenging. In this review, we explore strategies for evaluating industrial biotechnology through life cycle and techno-economic assessment, then contextualize how recent developments in synthetic biology have improved process viability by expanding feedstock availability and the productivity of microbes. By juxtaposing biological and industrial constraints, we highlight major obstacles between the disparate disciplines that hinder accurate process evaluation. The convergence of these disciplines is crucial in shifting towards carbon neutrality and a circular bioeconomy.

Biodiversity and disease risk in an algal biofuel system: An experimental test in outdoor ponds using a before-after-control-impact (BACI) design

For outdoor cultivation of algal feedstocks to become a commercially viable and sustainable option for biofuel production, algal cultivation must maintain high yields and temporal stability in environmentally variable outdoor ponds. One of the main challenges is mitigating disease outbreaks that leads to culture crashes. Drawing on predictions from the ‘dilution effect’ hypothesis, in which increased biodiversity is thought to reduce disease risk in a community, a teste of whether algal polycultures would reduce disease risk and improve feedstock production efficiencies compared to monocultures was performed. While the positive benefits of biodiversity on disease risk have been demonstrated in various systems, to the best of our knowledge this is the first test in an algal biofuel system. Here, the results a before-after-control-impact (BACI) experimental design to compare mean monoculture (control) and polyculture (impact) yield, stability, and productivity before and after fungal infection when grown in 400-L outdoor raceway ponds are presented. It has been found that polycultures did not experience a reduction in disease risk compared to monocultures or differ in production efficiencies throughout the course of the 43-day experiment. These results show that polyculture feedstocks can maintain similar levels of productivity, stability, and disease resistance to that of a monoculture. Determining whether these results are generalizable or represent one case study requires additional outdoor experiments using a larger variety of host and pathogen species.

Biocrude Oil Production by Integrating Microalgae Polyculture and Wastewater Treatment: Novel Proposal on the Use of Deep Water-Depth Polyculture of Mixotrophic Microalgae

Microalgae have attracted significant attention worldwide as one of the most promising feedstock fossil fuel alternatives. However, there are a few challenges for algal fuels to compete with fossil fuels that need to be addressed. Therefore, this study reviews the R&D status of microalgae-based polyculture and biocrude oil production, along with wastewater treatment. Mixotrophic algae are free to some extent from light restrictions using organic matter and have the ability to grow well even in deep water-depth cultivation. It is proposed that integrating the mixotrophic microalgae polyculture and wastewater treatment process is the most promising and harmonizing means to simultaneously increase capacities of microalgae biomass production and wastewater treatment with a low land footprint and high robustness to perturbations. A large amount of mixotrophic algae biomass is harvested, concentrated, and dewatered by combining highly efficient sedimentation through flocculation and energy efficient filtration, which reduce the carbon footprint for algae fuel production and coincide with the subsequent hydrothermal liquefaction (HTL) conversion. HTL products are obtained with a relatively low carbon footprint and separated into biocrude oil, solid, aqueous, and gas fractions. Algae biomass feedstock-based HTL conversion has a high biocrude oil yield and quality available for existing oil refineries; it also has a bioavailability of the recycled nitrogen and phosphorus from the aqueous phase of algae community HTL. The HTL biocrude oil represents higher sustainability than conventional liquid fuels and other biofuels for the combination of greenhouse gas (GHG) and energy return on investment (EROI). Deep water-depth polyculture of mixotrophic microalgae using sewage has a high potential to produce sustainable biocrude oil within the land area of existing sewage treatment plants in Japan to fulfill imported crude oil.

The Effects of Total Dissolved Carbon Dioxide on the Growth Rate, Biochemical Composition, and Biomass Productivity of Nonaxenic Microalgal Polyculture

The biosequestration of CO2 using microalgae has emerged as a promising means of recycling CO2 into biomass via photosynthesis, which could be used to produce biofuels as an attractive approach to CO2 mitigation. We investigated the CO2 fixation capability of the native nonaxenic microalgal culture using a 2 L photobioreactor operated in batch mode. The cultivation was carried out at varying concentrations of total dissolved CO2 (Tco2) in the bulk media ranging from 200 to 1000 mg L−1, and the temperature and light intensities were kept constant. A maximum CO2 fixation rate was observed at 400 mg L−1 of Tco2. Characteristic growth parameters such as biomass productivity, specific growth rate, maximum biomass yield, and biochemical parameters such as carbohydrate, protein, and lipids were determined and discussed. We observed that the effect of CO2 concentration on growth and biochemical composition was quite significant. The maximum biomass productivity was 22.10 ± 0.70 mg L−1 day−1, and the rate of CO2 fixation was 28.85 ± 3.00 mg L−1 day−1 at 400 mg L−1 of Tco2. The maximum carbohydrate (8.17 ± 0.49% dry cell weight) and protein (30.41 ± 0.65%) contents were observed at 400 mg L−1, whereas the lipid content (56.00 ± 0.82% dry cell weight) was the maximum at 800 mg L−1 of Tco2 in the bulk medium.

Biodiversity Improves Life Cycle Sustainability Metrics in Algal Biofuel Production

Algal biofuel has yet to realize its potential as a commercial and sustainable bioenergy source, largely due to the challenge of maximizing and sustaining biomass production with respect to energetic and material inputs in large-scale cultivation. Experimental studies have shown that multispecies algal polycultures can be designed to enhance biomass production, stability, and nutrient recycling compared to monocultures. Yet, it remains unclear whether these impacts of biodiversity make polycultures more sustainable than monocultures. Here, we present results of a comparative life cycle assessment (LCA) for algal biorefineries to compare the sustainability metrics of monocultures and polycultures of six fresh-water algal species. Our results showed that when algae were grown in outdoor experimental ponds, certain bicultures improved the energy return on investment (EROI) and greenhouse gas emissions (GHGs) by 20% and 16%, respectively, compared to the best monoculture. Bicultures outperformed monocultures by performing multiple functions simultaneously (e.g., improved stability, nutrient efficiency, biocrude characteristics), which outweighed the higher productivity attainable by a monoculture. Our results demonstrate that algal polycultures with optimized multifunctionality lead to enhanced life cycle metrics, highlighting the significant potential of ecological engineering for enabling future environmentally sustainable algal biorefineries.

Ecological Engineering Helps Maximize Function in Algal Oil Production

Algal biofuels have the potential to curb the emissions of greenhouse gases from fossil fuels, but current growing methods fail to produce fuels that meet the multiple standards necessary for economical industrial use. For example, algae grown as monocultures for biofuel production have not simultaneously and economically achieved high yields of the high-quality lipid-rich biomass desired for the industrial-scale production of bio-oil. Decades of study in the field of ecology have demonstrated that simultaneous increases in multiple functions, such as the quantity and quality of biomass, can occur in natural ecosystems by increasing biological diversity. Here, we show that species consortia of algae can improve the production of bio-oil, which benefits from both a high biomass yield and a high quality of biomass rich in fatty acids. We explain the underlying causes of increased quantity and quality of algal biomass among species consortia by showing that, relative to monocultures, species consortia can differentially regulate lipid metabolism genes while growing to higher levels of biomass, in part due to a greater utilization of nutrient resources. We identify multiple genes involved in lipid biosynthesis that are frequently upregulated in bicultures and further show that these elevated levels of gene expression are highly predictive of the elevated levels in biculture relative to that in monoculture of multiple quality metrics of algal biomass. These results show that interactions between species can alter the expression of lipid metabolism genes and further demonstrate that our understanding of diversity-function relationships from natural ecosystems can be harnessed to improve the production of bio-oil.IMPORTANCE Algal biofuels are one of the more promising forms of renewable energy. In our study, we investigate whether ecological interactions between species of microalgae regulate two important factors in cultivation-the biomass of the crop produced and the quality of the biomass that is produced. We found that species interactions often improved production yields, especially the fatty acid content of the algal biomass, and that differentially expressed genes involved in fatty acid metabolism are predictive of improved quality metrics of bio-oil. Other studies have found that diversity often improves productivity and stability in agricultural and natural ecosystems. Our results provide further evidence that growing multispecies crops of microalgae may improve the production of high-quality biomass for bio-oil.

Demonstration of transgressive overyielding of algal mixed cultures in microdroplets

Algae are ubiquitous in natural ecosystems and have been studied extensively for biofuel production due to their unique metabolic capabilities. Most studies to date have approached biofuel optimization through synthetic biology and process engineering with few industrial scale projects considering algal community interactions. Such interactions can potentially lead to increased productivity and reduced community invasability, both important characteristics for scalable algal biofuel production. It is estimated that over a million species of algae exist such that elucidating the interactions that might be beneficial for biofuel production remains extremely resource and time intensive. Here we describe a strategy for rapid, high-throughput screening of algal community combinations using a microfluidic platform to generate millions of parallel, nanoliter-scale algal mixed cultures for estimation of biomass accumulation. Model communities were first studied in a bench scale flask experiment and then examined using microfluidic droplets. These experiments showed consistent results for both positively interacting algal bicultures that increase biomass when together, and negatively interacting bicultures that decrease biomass. Specifically, these included enhanced performance of two bicultures, Ankistrodesmus falcatus and Chlorella sorokiniana, Chlorella sorokiniana and Selenastrum minutum, and reduced performance of a biculture consisting of Selenastrum capricornutum and Scenedesmus ecornis. While the ultimate techno-economic feasibility of algal bioproducts hinges on an amalgamation of scientific fields, rapid screening of algal communities will prove imperative for efficiently discovering community interactions.

Heterogeneity in Nitrogen Sources Enhances Productivity and Nutrient Use Efficiency in Algal Polycultures

Algae hold much promise as a potential feedstock for biofuels and other products, but scaling up biomass production remains challenging. We hypothesized that multispecies assemblages, or polycultures, could improve crop yield when grown in media with mixed nitrogen sources, as found in wastewater. We grew mono- and poly- cultures of algae in four distinct growth media that differed in the form (i.e., nitrate, ammonium, urea, plus a mixture of all three) but not the concentration of nitrogen. We found that mean biomass productivity was positively correlated with algal species richness, and that this relationship was strongest in mixed nitrogen media (on average 88% greater biomass production in 5-species polycultures than in monocultures in mixed nitrogen treatment). We also found that the relationship between nutrient use efficiency and species richness was positive across nitrogen treatments, but greatest in mixed nitrogen media. While polycultures outperformed the most productive monoculture only 0-14% of the time in this experiment, they outperformed the average monoculture 26-52% of the time. Our results suggest that algal polycultures have the potential to be highly productive, and can be effective in recycling nutrients and treating wastewater, offering a sustainable and cost-effective solution for biofuel production.

Ecological Stoichiometry Meets Ecological Engineering: Using Polycultures to Enhance the Multifunctionality of Algal Biocrude Systems

For algal biofuels to be economically sustainable and avoid exacerbating nutrient pollution, algal cultivation and processing must maximize rates of biofuel production while simultaneously minimizing the consumption of nitrogen (N) and phosphorus (P) fertilizers. We experimentally tested whether algal polycultures could be engineered to improve N and P nutrient-use efficiency compared to monocultures by balancing trade-offs in nutrient-use efficiency and biocrude production. We analyzed the flows of N and P through the processes of cultivation, biocrude production through hydrothermal liquefaction, and nutrient recycling in a laboratory-scale system. None of the six species we examined exhibited high N efficiency, P efficiency, and biocrude production simultaneously; each had poor performance in at least one function (i.e., <25th percentile). Polycultures of two to six species did not outperform the best species in any single function, but some polycultures exhibited more balanced performance and maintained all three functions at higher levels simultaneously than any of the monocultures (i.e., >67th percentile). Moreover, certain polycultures came closer to optimizing all three functions than any of the monocultures. By balancing trade-offs between N and P efficiency and biocrude production, polycultures could be used to simultaneously reduce the demand for both N and P fertilizers by up to 85%.

Algal polycultures enhance coproduct recycling from hydrothermal liquefaction

The aim of this study was to determine if polycultures of algae could enhance tolerance to aqueous-phase coproduct (ACP) from hydrothermal liquefaction (HTL) of algal biomass to produce biocrude. The growth of algal monocultures and polycultures was characterized across a range ACP concentrations and sources. All of the monocultures were either killed or inhibited by 2% ACP, but polycultures of the same species were viable at up to 10%. The addition of ACP increased the growth rate (up to 25%) and biomass production (53%) of polycultures, several of which were more productive in ACP than any monoculture was in the presence or absence of ACP. These results suggest that a cultivation process that applies biodiversity to nutrient recycling could produce more algae with less fertilizer consumption.