Tellurium Distribution and Speciation in Contaminated Soils from Abandoned Mine Tailings: Comparison with Selenium

Microbial mechanisms to transform the super-trace element tellurium: a systematic review and discussion of nanoparticulate phases

Tellurium is a super-trace metalloid on Earth. Owing to its excellent physical and chemical properties, it is used in industries such as metallurgy and manufacturing, particularly of semiconductors and - more recently - solar panels. As the global demand for tellurium rises, environmental issues surrounding tellurium have recently aroused concern due to its high toxicity. The amount of tellurium released to the environment is increasing, and microorganisms play an important role in the biogeochemical cycling of environmental tellurium. This review focuses on novel developments on tellurium transformations driven by microbes and includes the following sections: (1) history and applications of tellurium; (2) toxicity of tellurium; (3) microbial detoxification mechanisms against soluble tellurium anions including uptake, efflux and methods of reduction, and reduced ability to cope with oxidation stress or repair damaged DNA; and (4) the characteristics and applications of tellurium nanoparticles (TeNPs) produced by microbes. This review raises the awareness of microorganisms in tellurium biogeochemical cycling and the growing applications for microbial tellurium nanoparticles.

Speciation of Zn and Cd in sierozem soil, northwest China: bulk EXAFS and micro synchrotron X-ray fluorescence

Previous research studies have confirmed that Zn and Cd are the most predominant heavy metals in the Baiyin district, Gansu province, China. Furthermore, the speciation of Zn and Cd is a key factor in controlling the mobility, bioavailability, and toxicity of metals in Zn/Cd co-contaminated soil. In this study, the speciation of Zn and Cd in different types of agricultural soils including the Yellow River irrigated soil (s3) and sewage irrigated soil (s1 and s2) was investigated and compared by a combination of sequential extraction, bulk X-ray absorption fine structure (XAFS), and micro-X-ray fluorescence (μ-XRF) techniques. The results of the speciation quantified by XAFS were in general agreement with those obtained by sequential extraction, and the combination of both approaches allowed a reliable description of Zn/Cd speciation in soil. The speciation of Zn in the s1 soil exposed around the smelter was similar to speciation of Zn in the sewage irrigated s2 soil. In both soils, Zn was predominantly present as Zn-Al LDH (31-36%), Zn adsorbed on calcite (37-47%), and primary minerals (14-18% sphalerite and 9% franklinite). In contrast, the proportions of organic Zn (23%) and Zn-Al LDH (53%) were significantly higher in the Yellow River irrigated s3 soil, while that of Zn-calcite (24%) was lower. This indicated that Zn in s3 was less mobile and bioavailable than that in s1 and s2 soils. The content of bioavailable Zn in s3 was much lower than the background value and Zn did not pose a threat to the Yellow River irrigated soil. In addition, Cd was strongly correlated with Zn content and exhibited a simpler speciation. Cd adsorbed on illite and calcite was found as the major species in both soil types, posing higher migration and toxicity to the environment. Our study reported the speciation and correlation of Zn/Cd in sierozem soil for the first time and provided a significant theoretical basis for remediation actions to minimize Zn/Cd risks.

Formation and evolution of carbonaceous asteroid Ryugu: Direct evidence from returned samples

Samples of the carbonaceous asteroid Ryugu were brought to Earth by the Hayabusa2 spacecraft. We analyzed 17 Ryugu samples measuring 1 to 8 millimeters. Carbon dioxide-bearing water inclusions are present within a pyrrhotite crystal, indicating that Ryugu's parent asteroid formed in the outer Solar System. The samples contain low abundances of materials that formed at high temperatures, such as chondrules and calcium- and aluminum-rich inclusions. The samples are rich in phyllosilicates and carbonates, which formed through aqueous alteration reactions at low temperature, high pH, and water/rock ratios of <1 (by mass). Less altered fragments contain olivine, pyroxene, amorphous silicates, calcite, and phosphide. Numerical simulations, based on the mineralogical and physical properties of the samples, indicate that Ryugu's parent body formed ~2 million years after the beginning of Solar System formation.

Leaching Characteristics of Potentially Toxic Metals from Tailings at Lujiang Alum Mine, China

To investigate the leaching characteristics and potential environmental effects of potentially toxic metals (PTMs) from alum mine tailings in Lujiang, Anhui Province, soaking tests and simulated rainfall leaching experiments were conducted for two types of slag. PTMs comprising Cd, Cr, Cu, Mn, and Ni were detected in the slag. Cu and Cd contents exceeded the national soil risk screening values (GB 15618-2018). pH values of the two slag soaking solutions were negatively correlated with the solid:liquid ratio. pH values of the sintered slag soaking solutions with different solid:liquid ratios finally stabilized between 4.4 and 4.59, and those of the waste slag soaking solutions finally stabilized between 2.7 and 3.4. The concentrations of Cd, Cr, Cu, Mn, and Ni leached from waste slag were higher than those from sintered slag, and the dissolved concentrations of these PTMs in sintered slag were higher under rainfall leaching conditions than soaking conditions (the difference in Cr concentration was the smallest, 5.6%). The cumulative release of Cd, Cr, Cu, Mn, and Ni increased as the leaching liquid volume increased. The kinetic characteristics of the cumulative release of the five PTMs were best fitted by a double constant equation (R² > 0.98 for all fits). Single factor index evaluations showed that Mn and Ni were the PTMs with high pollution degrees (P_i for Mn and Ni exceed 1) in the leaching solutions. However, considering the biotoxicity of PTMs, the water quality index evaluations showed that the water quality of the sintered slag soaking solution, the waste slag soaking solution, and the sintered slag leachate was good, poor, and undrinkable, respectively. The health risk assessment showed that the total non-carcinogenic risk (HI) values in adults for both the sintered slag leachate and waste slag soaking solution exceeded the safe level of 1, with HI values of 3.965 and 2.342, respectively. The hazard quotient (HQ) for Cd was 1.994 for the sintered slag leachate, and Cd and Cr make up 50.29% and 15.93% of the total risk, respectively. Cr makes up 28.38% of the total risk for the waste slag soaking solution. These results indicate a high non-carcinogenic risk of exposure to Cd and Cr in the leaching solution used for drinking purposes. These findings may provide a reference for the evaluation and ecological control of PTM pollution in alum mining areas.

Selenium Oxoanions Removal from Wastewater by MoS42− Intercalated FeMgAl LDH: Catalytic Roles of Fe and Mechanism Insights

FeMgAl−MoS4 LDH was successfully synthesized by a one-pot hydrothermal process followed by ion-exchange methods, and this novel adsorbent was first conducted for aqueous selenite and selenate elimination. The Fe as a component for metal cation layers of LDHs could modulate the layer charge density, leading to more functional groups inserted into layers, and more importantly, this heterogeneous Fe can catalyze the surface reactions between Se(IV) or Se(VI) with S(-II) for oxoanions sequestration. The mechanisms are ion exchange between functional groups with HSeO3− and SeO32− for Se(IV) or SeO42− for Se(VI), followed by reduction by S(-II) from MoS42− groups. The existence of Fe in LDH cation layers, obviously enhanced the reactions (almost two times more for Se(IV) and three times more for Se(VI), respectively), resulting in satisfying adsorption capacities of 483.9 mg/g and 167.2 mg/g for Se(IV) and Se(VI), respectively. Mechanisms were further revealed by elementary analysis, XRD, FT−IR, SEM−EDX, and XPS, as well as the quantitative study. For sorption kinetics, the calculated values of capacities from the pseudo-second-order model are much closer to the experimental values. For sorption isotherms, Langmuir is better than the Freundlich isotherms model for closer capacities (505 mg/g for selenite and 172 mg/g for selenate). All these results demonstrated that the presence of heterogeneous Fe could catalyze the reduction of Se (IV/VI) for the aqueous system, and maybe other high oxidative states hazardous ions. So FeMgAl−MoS4 is a kind of novel adsorbent that offers a promising multi-functional and highly efficient solution for water selenium purification.

An ecological remediation model combining optimal substrate amelioration and native hyperaccumulator colonization in non-ferrous metal tailings pond

The vegetation deterioration and pollution expansion from non-ferrous metal tailings pond have been found in many countries leading to water soil erosion and human health risk. Conventional ecological remediation technologies of mine tailings such as capping were costly and elusive. This study provided an economic and effective model as an alternative by substrate amelioration and vegetation restoration. A field experiment was carried out on a silver tailings pond in southwest China. Tailings substrate was ameliorated by adding organic matter (decomposed chicken manure, DCM), structural conditioner (polyacrylamide, PAM), water-retaining agent (acrylic acid-bentonite water-retaining agent, AAB), and heavy metal immobilizer (biofuel ash, BFA), which were optimized by laboratory experiment. Native heavy metal hyperaccumulator, Bidens pilosa, was colonized. Vegetation coverage and plant height of Bidens pilosa reached about 80% and over 30 cm respectively after 3 months, and the turbidity of tailings leaching solution decreased by 60%. The practice showed that the proportion of available heavy metals in tailings substrate was significantly lower than that in the soil surrounding mining area. Immobilization didn't have stabilization effect on Cd, Zn, and Pb, and As was only 0.002%, phytoremediation had stabilization effect of Cd, Zn, As, and Pb were 2.5-3.5%, 1-2%, 0.25-0.5%, and 0.25-0.75%. Phytoremediation was more effective significantly in controlling heavy metal pollution risk of tailings than immobilization. These results provided a new ecological remediation OSA-NHC model, meaning a combination of optimal substrate amelioration and native hyperaccumulator colonization, which could achieve vegetation restoration and augment heavy metal pollution control in non-ferrous metal tailings pond.

Gradient rise in seepage pollution levels in tailings ponds shapes closer linkages between phytoplankton and bacteria

A large number of tailings ponds formed by slag accumulation have become serious environmental hazards. Spatially high potential energy and long-term accumulation may result in gradient-changing seepage pollution. The assemblages of phytoplankton and bacteria are widely used as assessment indicators. In this study, we investigate the changes in phytoplankton and bacterial assemblages in tailing pollution. The results showed that there are temporal and spatial variabilities in seepage pollution. The abundance and diversity of phytoplankton and bacteria decreased with increasing pollution. However, Synedra acus (diatom) and Polynucleobacter (bacteria) were positively correlated with pollution levels (r = 0.37, P < 0.05; r = 0.24, P < 0.05). Heavy metals are the main contributors to bacterial changes (16.46%), while nutrients are for algae (13.24%). Tailings pond pollution reduced the number of phytoplankton and bacterial linkages. However, more pollution broke the originally independent modules of phytoplankton and bacteria, and they produced more positive correlations (79.39%; 87.68%). Microcystis sp. and Limnobacter were the key nodes of the co-occurrence network in the polluted areas. Exploring the interactions between bacteria and phytoplankton within different pollution levels could provide insights into biological interaction patterns and the bioremediation of tailings ponds.

Accessing the environmental impact of tellurium metal

Tellurium is gaining technical significance because of being a vital constituent for the growth of green-energy products and technologies. Owing to its unique property of interchangeable oxidation states it has a tricky though interesting chemistry with basically unidentified environmental effects. The understanding of environmental actions of tellurium has significant gaps for instance, its existence and effects in various environmental sections related to mining, handling and removal and disposal methods. To bridge this gap it is required to assess its distinctive concentrations in the environment together with proper knowledge of its environmental chemistry. This in turn significantly requires developing systematic diagnostic schemes which are sensitive enough to present statistics in the concentrations which are environmentally relevant. The broad assessment of available statistics illustrates that tellurium is being found in a very scarce concentrations in various environmental sections. Very less information is available for the presence and effects of tellurium in air and natural water resources. Various soil and lake sediment analysis statistics indicate towards the presence of tellurium in soil owing to release of dust, ash and slag during mining and manufacturing practices. Computing the release and behavior of tellurium in environment needs a thorough assessment of its anthropogenic life cycle which in turn will facilitate information about its existing and prospective release in the environment, and will aid to handle the metal more sensibly.

Study on the Hyperspectral Retrieval and Ecological Risk Assessment of Soil Cr, Ni, Zn Heavy Metals in Tailings Area

The large-scale rapid monitoring of heavy metal pollution has become a hot topic due to increasing contamination of Tailings soil by heavy metal. In order to explore the possibility of using soil spectrum to estimate the content of heavy metals in soil and realize the rapid monitoring of soil heavy metals in the Yangshanchong tailings area in Tongling, China. The spectral reflectance of soil and the content of heavy metals (Cr, Ni, Zn) in soil were determined. The optimal bands of Cr, Ni and Zn elements in soil appeared at 467 nm, 467 nm and 468 nm respectively, and the maximum correlation coefficients were - 0.716, - 0.685 and - 0.630. The inversion model of element Cr constructed under the Reciprocal Transformation Second Derivative has a better effect, and its determination coefficient R² is 0.613; It is better to construct the model of elements Ni and Zn in the form of Reciprocal Transformation First Derivative, and their determination coefficients R² are 0.724 and 0.603, respectively. The results of the single factor index method showed that the pollution degree of heavy metal elements in the soil in the study area is Ni > Zn > Cr; the Nemerow comprehensive pollution index method showed that the three elements in the study area were polluted to varying degrees, and the comprehensive pollution index was in order Ni > Zn > Cr; Comprehensive potential ecological hazard index evaluation, the pollution degree and ecological risk of the study area were low.

Leaching of heavy metals from lead-zinc mine tailings and the subsequent migration and transformation characteristics in paddy soil

The leaching of heavy metals (HMs) from lead-zinc mine tailings caused by natural precipitation and the subsequent migration and transformation characteristics in paddy soil were investigated using simulative experiments. The contents of HMs in the leachate from lead-zinc mine tailings increased with the increasing of liquid-to-solid ratio. Significant differences of contents under the same rainfall were found among different HMs (P < 0.01). The increasing rates of the concentrations for Mn and Zn in leachate were much higher than the other selected HMs. The leaching results of all HMs were well fitted by the DoseResp equation, indicating that the leaching processes are controlled by multiple factors. When the paddy soil was exposed to lead-zinc mine tailings, the HMs could accumulate significantly in the paddy soil, and their contents increased with the simulated time. The average vertical migration rates (mg kg^-1 cm^-1 d^-1) of HMs in the paddy soil during the four months was ranked in the order of Zn (9.0✕10^-2) > Mn (8.1✕10^-2) > Cu (1.8✕10^-2) > Pb (1.6✕10^-2) > Cd (2.7✕10^-4) > As (2.4✕10^-4). Compared with the other HMs, Mn and Zn can be more easily leached from lead-zinc mine tailings, then migrate into deeper layers in paddy soil. The proportions in five chemical fractions of HMs varied significantly with the impact of lead-zinc mine tailings. The Zn, Cu, and As were mainly presented in residual fraction, while Pb, Mn, and Cd were mainly presented in carbonate-bound, Fe/Mn oxides-bound, and exchangeable fractions, respectively. The risk assessment code results showed that Zn, Mn, Cu, and As posed medium risk, while Pb and Cd posed an extremely high risk to the paddy soil environment. It's found that lead-zinc mine tailings could significantly enhance the ecological risk associated with HMs in the paddy soil.

The uptake of selenite in calcite revealed by X-ray absorption spectroscopy and quantum chemical calculations

Selenium (Se) is an important trace element in the environment, but the interaction of Se with calcite that may control the fate and geochemical behavior of Se is not fully understood. In this study, the molecular-scale mechanism for the uptake of selenite in calcite was investigated by a combination of laboratory experiments, extended X-ray absorption fine structure (EXAFS) spectroscopy, and quantum chemical calculations. Results showed that selenite can be largely distributed to calcite at circumneutral pH. The local structure of Se in calcite obtained from EXAFS analyses, in combination with quantum chemical calculations, demonstrated that selenite can be incorporated into calcite by substituting for the carbonate, and that the geometric incompatibility of selenite could be accommodated by a slight expansion of crystal volume. The findings from this study suggest that calcite could be a potential Se sink, providing an important insight into the understanding of the mobility and geochemical behavior of Se in the subsurface environments particularly in the groundwater system.

UV-Induced Redox Conversion of Tellurite by Biacetyl

Tellurium (Te) is a rare element of great value, but it exists mainly in the toxic form of tellurite (Te^IV) in water. Effective approaches that are able to reduce the toxicity and recover Te from contaminated water are highly needed. Here, we developed a simple but effective way to reduce toxic Te^IV to widely applicable elemental Te⁰. With the combination of ultraviolet (UV) and biacetyl (BD), the oxidation state of Te could be feasibly changed from IV to 0 or VI. The consumption of dissolved oxygen (DO) was a key factor in the redox conversion of Te^IV. Under UV irradiation, BD was first cleaved to acetyl radicals, which could then combine with water molecules to form more reductive diol radicals or combine with DO to form strongly oxidative peroxide radicals. Even without deoxygenation, the UV/BD system could rapidly change from being oxidative to being reductive because of the fast depletion of DO. Owing to the high quantum yield of the acetyl radical, the reduction efficiency of the UV/BD system was about 1 order of magnitude higher than that of UV/sulfite and was more efficient than the commonly used biological methods. This work provides a proof of concept for the reduction of tellurite, which could have relevant implications for water treatment and resource recovery applications.

Elemental Speciation Analysis in Environmental Studies: Latest Trends and Ecological Impact

Speciation analysis is a key aspect of modern analytical chemistry, as the toxicity, environmental mobility, and bioavailability of elemental analytes are known to depend strongly on an element’s chemical species. Henceforth, great efforts have been made in recent years to develop methods that allow not only the determination of elements as a whole, but also each of its separate species. Environmental analytical chemistry has not ignored this trend, and this review aims to summarize the latest methods and techniques developed with this purpose. From the perspective of each relevant element and highlighting the importance of their speciation analysis, different sample treatment methods are introduced and described, with the spotlight on the use of modern nanomaterials and novel solvents in solid phase and liquid-liquid microextractions. In addition, an in-depth discussion of instrumental techniques aimed both at the separation and quantification of metal and metalloid species is presented, ranging from chromatographic separations to electro-chemical speciation analysis. Special emphasis is made throughout this work on the greenness of these developments, considering their alignment with the precepts of the Green Chemistry concept and critically reviewing their environmental impact.

Tellurite Adsorption onto Bacterial Surfaces

Tellurium (Te) is an emerging contaminant and its chemical transformation in the environment is strongly influenced by microbial processes. In this study, we investigated the adsorption of tellurite [Te(IV), TeO₃^2-] onto the common soil bacterium Bacillus subtilis. Thiol-blocking experiments were carried out to investigate the role of cell surface sulfhydryl sites in tellurite binding, and extended X-ray absorption fine structure (EXAFS) spectroscopy was performed to determine the chemical speciation of the adsorbed tellurite. The results indicate that tellurite reacts with sulfhydryl functional groups in the extracellular polymeric substances (EPS) produced by B. subtilis. Upon binding to sulfhydryl sites in the EPS, the Te changes from Te-O bonds to Te-S coordination. Further analysis of the surface-associated molecules shows that the EPS of B. subtilis contain proteins. Removal of the proteinaceous EPS dramatically decreases tellurite adsorption and the sulfhydryl surface site concentration. These findings indicate that sulfhydryl binding in EPS plays a key role in tellurite adsorption on bacterial surfaces.

The role of cysteine in tellurate reduction and toxicity

The tellurium oxyanion tellurate is toxic to living organisms even at low concentrations; however, its mechanism of toxicity is poorly understood. Here, we show that exposure of Escherichia coli K-12 to tellurate results in reduction to elemental tellurium (Te[0]) and the formation of intracellular reactive oxygen species (ROS). Toxicity assays performed with E. coli indicated that pre-oxidation of the intracellular thiol pools increases cellular resistance to tellurate-suggesting that intracellular thiols are important in tellurate toxicity. X-ray absorption spectroscopy experiments demonstrated that cysteine reduces tellurate to elemental tellurium. This redox reaction was found to generate superoxide anions. These results indicate that tellurate reduction to Te(0) by cysteine is a source of ROS in the cytoplasm of tellurate-exposed cells.

Development of a Tellurium Speciation Study Using IC-ICP-MS on Soil Samples Taken from an Area Associated with the Storage, Processing, and Recovery of Electrowaste

The optimization and validation of a methodology for determining and extracting inorganic ionic Te(VI) and Te(IV) forms in easily-leached fractions of soil by Ion Chromatography-Inductively Coupled Plasma-Mass Spectrometry (IC-ICP-MS) were studied. In this paper, the total concentration of Te, pH, and red-ox potential were determined. Ions were successfully separated in 4 min on a Hamilton PRPX100 column with 0.002 mg/kg and 0.004 mg/kg limits of detection for Te(VI) and Te(IV), respectively. Soil samples were collected from areas subjected to the influence of an electrowaste processing and sorting plant. Sequential chemical extraction of soils showed that tellurium was bound mainly with sulphides, organic matter, and silicates. Optimization of soil extraction allowed 20% average extraction efficiency to be obtained, using 100 mM citric acid as the extractant. In the tested soil samples, both tellurium species were present. In most cases, the soils contained a reduced Te form, or the concentrations of both species were similar.

Microscale Investigation into Selenium Distribution and Speciation in Se-Rich Soils from Enshi, China

In this study, we investigated the distribution and chemical speciation of Se in Se-rich soil by using micro-focused X-ray absorption near-edge structure (μ-XANES) spectroscopy coupling with X-ray fluorescence (μ-XRF) mapping. The microscale distribution showed that Se is heterogeneously distributed in the soil from seleniferous areas in Enshi, China. Se K-edge μ-XANES analysis suggested that Se is mainly present as Se(IV), organic Se(-II) or Se(0) species in Se-rich agricultural soil. The findings from this study would help improve the understanding of the fate, mobility, bioavailability, and biogeochemical cycling of Se in the seleniferous soil environment.

DOM derivations determine the distribution and bioavailability of DOM-Se in selenate applied soil and mechanisms

Straw amendment and plant root exudates modify the quality and quantities of soil dissolved organic matter (DOM) and then manipulate the fractions of soil selenium (Se) and its bioavailability. Two typical soils with distinct pH were selected to investigate the effect of different contributors on DOM-Se in soil. The mechanisms relying on the variation in DOM characteristics (quality, quantity and composition) were explored by UV-Vis, ATR-FTIR and 3D-EEM. Straw amendment significantly (p < 0.05) suppressed the selenate bioavailability. The reduction in wheat Se content was greater in krasnozems than in Lou soil, as more HA fraction appeared in krasnozems. The root exudates of wheat mainly elevated the low molecular hydrophilic compounds (Hy) in soil, which contributed to the SOL-Hy-Se fractions and thus grain Se in soils (p < 0.01). However, straw amendment promoted DOM transforming from small molecules (Hy and FA) to aromatic large molecules (HA), when accompanied with the reduction and retention of Se associated with these molecules. As a result, selenium bioavailability and toxicity reduced with DOM amendment and DOM-Se transformation.

Leaching of heavy metals from abandoned mine tailings brought by precipitation and the associated environmental impact

Abandoned tailings are one of the most important sources of heavy metal pollution in the areas surrounding mining districts, and significant leaching of heavy metals could be brought by precipitation. This study investigated the leaching of heavy metals from the tailings of a small-scale abandoned polymetallic mine in south China by rainwater with batch and column tests and evaluated the associated environmental impact. The mean contents of Cr, Ni, Cu, Zn, As, Cd, and Pb in the un-weathered mine tailings were 1.46×10², 3.11×10², 4.10×10³, 2.18×10⁴, 2.82×10², 5.65×10², and 8.74×10³mg/kg, respectively, and appreciable fractions of Cd, Zn, Cu, and Cr in the tailings were present in the acid soluble form. Batch and column leaching tests consistently showed that significant quantities of heavy metals could be released from the mine tailings. Based on the results of column leaching tests, it was estimated that the average fluxes of Cr, Ni, Cu, Zn, As, Cd, and Pb from the mine tailings at the studied mining district leached by precipitation were 3.20, 38.3, 12.5, 1.52×10⁴, 104, 1.08, and 9.26g/ha/yr, respectively. The metal-rich tailing leachate would impact the quality of surface water and soils downhill of the mining district, and pose significant potential ecological risk to the farmland soils, which are irrigated by local surface water. These findings indicate the importance of tailings as a source of heavy metals in the mining districts of south China with heavy precipitation, as well as the need for mitigating the releases of heavy metals and the associated environmental impact from abandoned mine tailings.

Tracing and quantifying contributions of end members to karst water at a coalfield in southwest China

Karst water, which provides 25% of the world's drinking water, is especially vulnerable to anthropogenic contamination. Such is the case in southwestern China with trace element pollution in important karst aquifers. Approximately 20% of the total study area consisted of abandoned mine tailings with elevated concentrations of Fe, S, Mn, As, Cu, and Cr. Acid mine drainage (AMD) water originating from pyrite oxidation of the tailings was characterized by low pH and high concentrations of Fe, SO₄^2-, and As. Concentrations of Fe, Mn, Al, SO₄^2-, As, Cd, and Pb in spring water in wet and dry seasons were greater than WHO and USEPA drinking water guidelines. Based on the results of mineral characterizations, hydrogeochemistry, and isotopic compositions (δ³⁴S_SO4, δ¹⁸O_SO4, and δ¹⁸O_H2O), the chemistry of AMD water was primarily controlled by pyrite oxidation, river water by atmospheric precipitation, and spring water by carbonate rock dissolution and mixing with river and AMD waters. A three-end-member mixing model identified the contributions of these different end members to spring water quality. Although AMD water was characterized by the lowest mixing percentages during the wet (14.1%) and dry (26.9%) seasons, it played a very important role in degrading spring water quality. Based on these findings, an investigation strategy was developed for illuminating seasonal water quality and potential remediation methods corresponding to the contaminants in the spring water are also proposed to manage this seriously polluted karst system. Results could benefit remediation planning for these distinctively complex and vulnerable systems in other regions of the world.

Application of synchrotron radiation and other techniques in analysis of radioactive microparticles emitted from the Fukushima Daiichi Nuclear Power Plant accident-A review

During the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident, large amounts of radioactive materials were released into the environment. Among them, a large proportion of the radionuclides, such as Cs, entered into the environment as radioactive microparticles (RMs). In recent years, the characterization of RMs based on synchrotron radiation (SR) techniques has been reported, since their physical and chemical properties played an important role in evaluating the chemical reactions and physical changes that occurred when the nuclear material meltdowns took place. In this review, we summarize separation and measurement technologies used in studies of RMs, and we emphasize the application of SR-based techniques in the characterization of RMs. We report research progress, including information for elemental composition, isotopic distribution, radioactivity, and formation processes. Also, we compare the RMs from the FDNPP and the Chernobyl Nuclear Power Plant accidents. The SR-based technologies offer great improvement in the resolution and precision compared to conventional technologies, such as X-ray fluorescence and X-ray diffraction.

Photochemical Vapor Generation of Tellurium: Synergistic Effect from Ferric Ion and Nano-TiO2

Photochemical vapor generation (PVG) is emerging as a promising analytical tool for Te determination, thanks to its efficient matrix separation, and simple and green procedure. However, the low PVG generation efficiency of Te is the bottleneck for its wide application in environmental samples containing trace Te. Herein, we reported a high efficient PVG for Te determination by synergistic effect of ferric ion and nano-TiO₂. The analytical sensitivity was enhanced approximately 15-fold for Te(IV) in the presence of both ferric ions and nano-TiO₂, comparing to conventional PVG. Besides, the use of nano-TiO₂ can provide Te(VI) and Te(IV) an equal and high PVG efficiency in the presence of ferric ions, owned to the high photocatalytic performance of TiO₂ under short-wavelength UV irradiation (254 and 185 nm). Under the optimized experimental conditions, a detection limit of 1.0 ng L^-1 was obtained. The precision of replicate measurements was 2.3% (RSD, n = 7) at 0.5 μg L^-1 for Te(IV). The methodology was validated by successful determination of Te in surface waters and two standard reference sediment samples. To our best knowledge, this is the first report of the synergistic enhancement of transitional metal ions and nano-TiO₂ in PVG, which possesses potential for highly sensitive determination of vapor-forming elements.