Renewable Alkenes from the Hydrothermal Treatment of Polyhydroxyalkanoates-Containing Sludge

Optimization of dissolution and fermentation acid production of rhamnolipid-alkali-heat synergistic pretreatment of sludge

With the development of the urban sewage treatment industry, the sludge output has increased year by year, and it has the characteristics of large output and high organic content, and has great potential for resource recovery. However, the biodegradability of sludge is poor, resulting in low added value of resource products. Therefore, it is necessary to treat sludge efficiently and improve the utilization. Based on this, the effects on sludge characteristics and acid-producing fermentation were investigated, and optimal conditions were determined by response surface method. The results showed that: The optimal conditions for experimental optimization are rhamnolipid (RL: 40 mg/gVS) alkali (Alk: 35 mg/gVS), heat: 80 °C. Response surface design optimization results are RL (28.44 mg/gVS), NaOH (35 mg/gVS), heat: 80 °C. In the process of RL-Alk-Heat pretreatment, the organic matter dissolution is Heat > Alk. Also, RL, Alk and Heat all promoted the content of fluorescent substances. From the results of the optimal combination verification test, it showed that SC (Soluble carbohydrate) and SP (Soluble protein) increase. Among them, three-factor treatment is higher than two-factor treatment than single-factor treatment.

Recovery Techniques Enabling Circular Chemistry from Wastewater

In an era where it becomes less and less accepted to just send waste to landfills and release wastewater into the environment without treatment, numerous initiatives are pursued to facilitate chemical production from waste. This includes microbial conversions of waste in digesters, and with this type of approach, a variety of chemicals can be produced. Typical for digestion systems is that the products are present only in (very) dilute amounts. For such productions to be technically and economically interesting to pursue, it is of key importance that effective product recovery strategies are being developed. In this review, we focus on the recovery of biologically produced carboxylic acids, including volatile fatty acids (VFAs), medium-chain carboxylic acids (MCCAs), long-chain dicarboxylic acids (LCDAs) being directly produced by microorganisms, and indirectly produced unsaturated short-chain acids (USCA), as well as polymers. Key recovery techniques for carboxylic acids in solution include liquid-liquid extraction, adsorption, and membrane separations. The route toward USCA is discussed, including their production by thermal treatment of intracellular polyhydroxyalkanoates (PHA) polymers and the downstream separations. Polymers included in this review are extracellular polymeric substances (EPS). Strategies for fractionation of the different fractions of EPS are discussed, aiming at the valorization of both polysaccharides and proteins. It is concluded that several separation strategies have the potential to further develop the wastewater valorization chains.

Molecular mechanisms of interaction between enzymes and Maillard reaction products formed from thermal hydrolysis pretreatment of waste activated sludge

Thermal hydrolysis pretreatment (THP) is often used to improve the anaerobic digestion performance of waste activated sludge (WAS) in wastewater treatment plants (WWTPs). During the THP process, the proteins and polysaccharides in the biomass will undergo hydrolysis and Maillard reaction, producing biorefractory organic substances, such as recalcitrant dissolved organic nitrogen (rDON) and melanoidins. In this study, a series of spectroscopy methods were used to quantitatively analyze the Maillard reaction of glucose and lysine, and the interaction mechanisms of the Maillard reaction products (MRPs) and lysozyme were investigated. Results showed that the typical aromatic heterocyclic structures in MRPs, such as pyrazine and furan, were found to quench molecular fluorescence of lysozyme, resulting in an unfolding of standard protein structure and increase in lysozyme hydrophobicity. Significant loss of enzyme activity was detected during this process. Thermodynamic parameters obtained from isothermal titration calorimetry (ITC) confirmed that the interaction between MRPs and lysozyme occurred both exothermically and spontaneously. Density functional theory (DFT) calculations suggested that the molecular interactions of MRPs and protein included parallel dislocation aromatic stacking, T-shaped vertical aromatic stacking, H-bond and H-bond coupled to aromatic stacking.

Efficient Production of Polyhydroxyalkanoate Through Halophilic Bacteria Utilizing Algal Biodiesel Waste Residue

The objective of the current work was to investigate the potential of halophilic bacterial isolates for efficient utilization of crude glycerol from algal biodiesel waste into polyhydroxyalkanoates (PHAs) a green plastic. Screening of the isolates was directly done in algal biodiesel waste residue containing solid agar plates supplemented with Nile red. Crude glycerol is a biodiesel waste whose bioconversion into value-added products provides an alternative for efficient management with dual benefit. For the scale-up studies of PHAs, Halomonas spp. especially H. daqingensis was observed as a potential candidate growing well in 3% Algal biodiesel waste residue (ABWR), 5% NaCl supplementation at 35°C within 48 h of incubation. Maximum Cell dry weight (CDW) of 0.362 ± 0.001 g and 0.236 ± 0.003 g PHA was obtained with H. daqingensis when grown in the fermentor with 0.5 vvm air flow rate and 200 rpm containing 3% ABWR supplemented with 5% NaCl at 35°C incubation temperature for 48 h. ABWR can serve as a sole substrate for PHA production at an industrial scale serving two approaches: getting rid of the biodiesel industrial waste containing high amount of glycerol besides using waste replacing commercial substrate thereby reducing the cost of the product.

Organoarsenic conversion to As(III) in subcritical hydrothermal reaction of livestock manure

Liquid phase produced by the subcritical hydrothermal liquefaction (HTL) of livestock manure is extensively used in agronomic and environmental applications, but the potential risks caused by inherent pollutants (e.g., roxarsone, ROX) of the livestock manure have not been considered. This study shows that less toxic ROX is completely converted into highly toxic As(III) and As(V) in the HTL reaction with temperature more than 240 °C. Moreover, more than 81.5% of As is distributed in the liquid phase generated by the livestock manure HTL reaction. Notably, the hydrothermal products of livestock manure facilitate the conversion of As(V) to As(III). The resulting hydrochar and aldehydes act as electron donors for As(V) reduction, thus resulting in the formation of As(III). Furthermore, the dissociated As promotes the depolymerization and deoxygenation of the macromolecular compounds to produce more small oxygen-containing compounds such as aldehydes, further boosting the As(V) reduction to As(III). These results indicate that the liquid phase of the livestock manure has potential risks in applications as a fertilizer. Such findings have substantial implications in biomass utilization and redox reactions of envirotechnical and biogeochemical relevance.

Vapor-phase conversion of aqueous 3-hydroxybutyric acid and crotonic acid to propylene over solid acid catalysts

Vapor phase conversion of 3-hydroxybutyric and crotonic acid to propylene in a continuous-flow reactor over silica–alumina and niobium catalysts demonstrates a new strategy for producing renewable fuels and chemicals from wastewater carbon.

Coenzyme Q biosynthesis inhibition induces HIF-1α stabilization and metabolic switch toward glycolysis

Coenzyme Q₁₀ (CoQ, ubiquinone) is a redox-active lipid endogenously synthesized by the cells. The final stage of CoQ biosynthesis is performed at the mitochondrial level by the 'complex Q', where coq2 is responsible for the prenylation of the benzoquinone ring of the molecule. We report that the competitive coq2 inhibitor 4-nitrobenzoate (4-NB) decreased the cellular CoQ content and caused severe impairment of mitochondrial function in the T67 human glioma cell line. In parallel with the reduction in CoQ biosynthesis, the cholesterol level increased, leading to significant perturbation of the plasma membrane physicochemical properties. We show that 4-NB treatment did not significantly affect the cell viability, because of an adaptive metabolic rewiring toward glycolysis. Hypoxia-inducible factor 1α (HIF-1α) stabilization was detected in 4-NB-treated cells, possibly due to the contribution of both reduction in intracellular oxygen tension and ROS overproduction. Exogenous CoQ supplementation partially recovered cholesterol content, HIF-1α degradation, and ROS production, whereas only weakly improved the bioenergetic impairment induced by the CoQ depletion. Our data provide new insights on the effect of CoQ depletion and contribute to shed light on the pathogenic mechanisms of ubiquinone deficiency syndrome.

Life Cycle Assessment and Energy Balance of a Novel Polyhydroxyalkanoates Production Process with Mixed Microbial Cultures Fed on Pyrolytic Products of Wastewater Treatment Sludge

A “cradle-to-grave” life cycle assessment is performed to identify the environmental issues of polyhydroxyalkanoates (PHAs) produced through a hybrid thermochemical-biological process using anaerobically digested sewage sludge (ADSS) as feedstock. The assessment includes a measure of the energy performance of the process. The system boundary includes: (i) Sludge pyrolysis followed by volatile fatty acids (VFAs) production; (ii) PHAs-enriched biomass production using a mixed microbial culture (MMC); (iii) PHAs extraction with dimethyl carbonate; and iv) PHAs end-of-life. Three scenarios differing in the use of the syngas produced by both pyrolysis and biochar gasification, and two more scenarios differing only in the external energy sources were evaluated. Results show a trade-off between environmental impacts at global scale, such as climate change and resources depletion, and those having an effect at the local/regional scale, such as acidification, eutrophication, and toxicity. Process configurations based only on the sludge-to-PHAs route require an external energy supply, which determines the highest impacts with respect to climate change, resources depletion, and water depletion. On the contrary, process configurations also integrating the sludge-to-energy route for self-sustainment imply more onsite sludge processing and combustion; this results in the highest values of eutrophication, ecotoxicity, and human toxicity. There is not a categorical winner among the investigated configurations; however, the use of a selected mix of external renewable sources while using sludge to produce PHAs only seems the best compromise. The results are comparable to those of both other PHAs production processes found in the literature and various fossil-based and bio-based polymers, in terms of both non-biogenic GHG emissions and energy demand. Further process advancements and technology improvement in high impact stages are required to make this PHAs production process a competitive candidate for the production of biopolymers on a wide scale.

Molecular composition of hydrothermal liquefaction wastewater from sewage sludge and its transformation during anaerobic digestion

Anaerobic digestion (AD) has shown potential to convert hydrothermal liquefaction wastewater (HTLWW) into biogas in previous studies. However, the identification of refractory components and further insights into the molecular transformations of organics in HTLWW are essential for developing more efficient AD processes. In this study, two HTLWWs were obtained from the temperature-derived hydrothermal liquefaction of sewage sludge at 170 ℃ and 320 ℃. Their molecular compositions, as well as their modifications in the subsequent AD process, were characterized using a suite of advanced molecular tools. The dissolved organic matter (DOM) in the high temperature-derived HTLWW was lower in molecular weight, less saturated, less oxidized, and enhanced in nitrogenous substances. During the AD process, most of the volatile compounds and low molecular weight (LMW) neutrals were removed, while biopolymers were the most refractory. Carboxylic-rich alicyclic molecules (CRAM), particularly those containing 3 to 5 N for low temperature-derived DOM and 1 to 3 N for high temperature-derived DOM, were resistant to anaerobic biodegradation. Meanwhile, compounds with fewer nitrogens and more carboxyl groups were preferentially produced. This molecular characterization of HTLWW-derived DOM and examination of its transformation during AD will contribute to the development of efficient methods for HTLWW treatment in the future.