Synergistic Effect of Cu/CeO2 and Pt-BaO/CeO2 Catalysts for a Low-Temperature Lean NO x Trap

Synergistic Catalytic Removal of NOx and n-Butylamine via Spatially Separated Cooperative Sites

Synergistic control of nitrogen oxides (NOx) and nitrogen-containing volatile organic compounds (NVOCs) from industrial furnaces is necessary. Generally, the elimination of n-butylamine (n-B), a typical pollutant of NVOCs, requires a catalyst with sufficient redox ability. This process induces the production of nitrogen-containing byproducts (NO, NO2, N2O), leading to lower N2 selectivity of NH3 selective catalytic reduction of NOx (NH3-SCR). Here, synergistic catalytic removal of NOx and n-B via spatially separated cooperative sites was originally demonstrated. Specifically, titania nanotubes supported CuOx-CeO2 (CuCe-TiO2 NTs) catalysts with spatially separated cooperative sites were creatively developed, which showed a broader active temperature window from 180 to 340 °C, with over 90% NOx conversion, 85% n-B conversion, and 90% N2 selectivity. A synergistic effect of the Cu and Ce sites was found. The catalytic oxidation of n-B mainly occurred at the Cu sites inside the tube, which ensured the regular occurrence of the NH3-SCR reaction on the outer Ce sites under the matching temperature window. In addition, the n-B oxidation would produce abundant intermediate NH2*, which could act as an extra reductant to promote NH3-SCR. Meanwhile, NH3-SCR could simultaneously remove the possible NOx byproducts of n-B decomposition. This novel strategy of constructing cooperative sites provides a distinct pathway for promoting the synergistic removal of n-B and NOx.

Continuous Unsteady-State De-NOx System via Tandem Water-Gas Shift, NH3 Synthesis, and NH3-SCR under Periodic Lean/Rich Conditions

The development of urea-free and platinum group metal (PGM)-free catalytic systems for automotive emission control is a challenging task. Herein, we report a new de-NOx system using cyclic feeds of rich and lean gas mixtures with PGM-free catalysts. Initial catalyst screening tests showed that Cu/CeO2 with 5 wt % Cu loading was the most suitable for the water-gas shift reaction (WGS, CO + H2O → CO2 + H2), followed by the selective NH3 synthesis by the NO + H2 reaction. The unsteady-state system under alternating feeds of rich (0.1% NO + 0.5% CO + 1% H2O) and lean (0.1% NO + 2% O2 + 1% H2O) gas mixtures over a mixture of Cu/CeO2 and Cr-exchanged mordenite (CrMOR) showed higher NOx conversion than the steady-state (0.1% NO + 0.35% CO + 0.6% O2 + 1% H2O) reaction between 200 and 500 °C. The de-NOx mechanism under periodical rich/lean conditions was studied by operando infrared (IR) experiments. In the rich period, the WGS reaction on the Cu/CeO2 catalyst yield H2, which reduces NO to NH3 on the Cu/CeO2 catalyst. NH3 is then captured by the Brønsted acid sites of CrMOR. In the subsequent lean period, the adsorbed NH3 acts as a reductant for the selective catalytic reduction of NOx catalyzed by the Cr sites of CrMOR. This study demonstrates a new urea-free and PGM-free catalytic system that can provide an alternative de-NOx technology for automotive catalysis under periodic rich/lean conditions.

Unique κ-Ce2Zr2O8 Superstructure Promoting the NOx Adsorption-Selective Catalytic Reduction (AdSCR) Performance of the WO3/CeZrOx Catalyst

Selective catalytic reduction of NOx by NH3 (NH3-SCR) for diesel emission control at low temperatures is still a great challenge due to the limit of the urea injection threshold and inferior SCR activity of state-of-the-art catalyst systems below 200 °C. Fabricating bifunctional catalysts with both low temperature NOx adsorption-storage capacity and medium-high temperature NOx reduction activity is an effective strategy to solve the issues mentioned above but is rarely investigated. Herein, the WO3/Ce0.68Zr0.32Ox (W/CZ) catalyst containing the κ-Ce2Zr2O8 pyrochlore structure was successfully developed by a simple H2 reduction method, not only showing superior NOx adsorption-storage ability below 180 °C but also exhibiting excellent NH3-SCR activity above 180 °C. The presence of the pyrochlore structure effectively increased the oxygen vacancies on the κ-Ce2Zr2O8-containing W/CZ catalyst with enhanced redox property, which significantly promoted the NOx adsorption-storage as active nitrate species below 180 °C. Upon NH3 introduction above 180 °C, the κ-Ce2Zr2O8-containing W/CZ catalyst showed greatly improved NOx reduction performance, suggesting that the pyrochlore structure played a vital role in improving the NOx adsorption-selective catalytic reduction (AdSCR) performance. This work provides a new perspective for designing bifunctional CeZrOx-based catalysts to efficiently control the NOx emissions from diesel engines during the cold-start process.

Comparison of Cu-CHA-Zeolites in the Hybrid NSR-SCR Catalytic System for NOx Abatement in Mobile Sources

DeNOx activity in a NSR–SCR hybrid system of two copper-containing chabazite-type zeolitic catalysts was addressed. A Pt-Ba-K/Al2O3 model catalyst was used as the NSR (NOx storage and reduction) catalyst. For the SCR (selective catalytic reduction) system, two Cu-CHA zeolites were synthesized employing a single hydrothermal synthesis method assisted with ultrasound and incorporating Cu in a 2 wt.%, 2Cu-SAPO-34 and 2Cu-SSZ-13. The prepared catalysts were characterized, and the crystallinity, surface area, pore size, HR-TEM and EDX mapping, coordination of Cu ions and acidity were compared. The NH3 storage capacity of the SCR catalysts was 1890 and 837 μmol NH3·gcat−1 for 2Cu-SAPO-34 and 2Cu-SSZ-13, respectively. DeNOx activity was evaluated for the single NSR system and the double-bed NSR–SCR by employing alternating lean (3%O2) and rich (1%H2) cycles, maintaining a concentration of 600 ppm NO, 1.5% H2O and 0.3% CO2 between 200 and 350 °C. The addition of the SCR system downstream of the NSR catalyst significantly improved NOx conversion mainly at low temperature, maintaining the selectivity to N2 above 80% and reaching values above 90% at 250 °C when the 2Cu-SSZ-13 catalyst was located. The total reduction in the production of NH3 and ~2% of N2O was observed when comparing the NSR–SCR configuration with the single NSR catalyst.

Advances in single-atom catalysts: Design, synthesis and environmental applications

Over the past few years, single-atom catalysts (SACs) on the horizon have driven rapid and extensive scientific advances in heterogeneous catalysis. Nevertheless, large-scale applications of SACs in the environment have been hindered by the problematic synthesis of catalysts, because the atomic-scale materials with high activation energy are easy to form nanoclusters and nanoparticles in the synthesis stage. The catalytic stability and catalytic activity of SACs in the treatment of complex environmental pollutants also need to be further researched. Herein, the review is built on a comprehensive discussion of the design and synthesis strategies of SACs. The shortcomings of traditional methods and the improvement from different angles like defect regulation are analyzed. Furthermore, the reaction mechanism of SACs in different reactions was summarized, and the environmental applications of SACs, such as wastewater treatment, carbon dioxide reduction, nitrogen reduction, hydrogen evolution, NO_x reduction and oxidation, volatile organic compounds removing and environmental monitoring are exemplified to deeply evaluate the prospects and challenges of SACs in the field of environmental protection.

Defective transition metal hydroxide-based nanoagents with hypoxia relief for photothermal-enhanced photodynamic therapy

Recently, phototherapy has attracted much attention due to its negligible invasiveness, insignificant toxicity and excellent applicability. The construction of a newly proposed nanosystem with synergistic photothermal and photodynamic tumor-eliminating properties requires a delicate structure design. In this work, a novel therapeutic nanoplatform (denoted as BCS-Ce6) based on defective cobalt hydroxide nanosheets was developed, which realized hypoxia-relieved photothermal-enhanced photodynamic therapy against cancer. Defective cobalt hydroxide exhibited high photothermal conversion efficacy at the near-infrared region (49.49% at 808 nm) as well as enhanced catalase-like activity to produce oxygen and greatly boost the singlet oxygen generation by a photosensitizer, Ce6, realizing efficacious dual-modal phototherapy. In vivo and in vitro experiments revealed that BCS-Ce6 can almost completely extinguish implanted tumors in a mouse model and present satisfactory biocompatibility during the treatment. This work sets a new angle of preparing photothermal agents and constructing comprehensive therapeutic nanosystems with the ability to modulate the hypoxic tumor microenvironment for efficient cancer therapy.

Roles of Oxygen Vacancies in the Bulk and Surface of CeO2 for Toluene Catalytic Combustion

Catalytic combustion technology is one of the effective methods to remove VOCs such as toluene from industrial emissions. The decomposition of an aromatic ring via catalyst oxygen vacancies is usually the rate-determining step of toluene oxidation into CO₂. Series of CeO₂ probe models were synthesized with different ratios of surface-to-bulk oxygen vacancies. Besides the devotion of the surface vacancies, a part of the bulk vacancies promotes the redox property of CeO₂ in toluene catalytic combustion: surface vacancies tend to adsorb and activate gaseous O₂ to form adsorbed oxygen species, whereas bulk vacancies improve the mobility and activity of lattice oxygen species via their transmission effect. Adsorbed oxygen mainly participates in the chemical adsorption and partial oxidation of toluene (mostly to phenolate). With the elevated temperatures, lattice oxygen of the catalysts facilitates the decomposition of aromatic rings and further improves the oxidation of toluene to CO₂.