How g-C3N4 Works and Is Different from TiO2 as an Environmental Photocatalyst: Mechanistic View

Enhanced Visible-Light H2O2 Production over Pt/g-C3N4 Schottky Junction Photocatalyst

Photocatalytic for hydrogen peroxide (H2O2) production is thought as a promising technology owing to its clean and green properties with the cheap and easily available raw materials of H2O and O2. Herein, Pt/g-C3N4 Schottky junction photocatalysts with ultralow Pt contents (0.025-0.1 wt %) were successfully fabricated by an impregnation-reduction method. It can efficiently reduce O2 to generate H2O2 without a sacrificial agent under visible-light irradiation. The yield of H2O2 produced over Pt0.05/g-C3N4 with the optimal 0.05 wt % Pt reached 31.82 μM, which was 2.46 times that of g-C3N4 and higher than most of those in the literature. It also showed good stability in three repeated tests. The deposition of highly dispersed metal Pt nanoparticles with low and limited content can expose enough active Pt atoms, significantly enhance the separation efficiency of photogenerated carriers, and reduce its negative effect on H2O2 decomposition, resulting in improved and outstanding efficiency of H2O2 production. The ·O2- radicals were found to be the main active species. The mechanism of photocatalytic H2O2 production was confirmed to be a two-step single electron route (O2 + e-→ ·O2- → H2O2).

Efficient photocatalytic NO removal with inhibited NO2 formation and catalyst loss over sponge-supported and functionalized g-C3N4

Though photocatalytic purification of NO has been widely studied, how to avoid secondary pollution during gas-solid reaction is still a challenge, especially in inhibiting the formation of toxic intermediates (NO2) and avoiding the blow away of powdery photocatalyst. Herein, we proposed a one-step solvothermal method to prepare melamine sponge (MS) supported and functionalized g-C3N4 (CN), which simultaneously realizes the inhibition of NO2 formation and catalyst loss. Sodium hydroxide, which plays a dual role, has been introduced during the preparation of supported photocatalyst. Specifically, sodium atom, as the modifier of performance, could facilitate the randomly distributed charge of pristine CN to be converged, which accelerates the adsorption/activation of reactants for efficient and deep NO oxidation. Hydroxyl group, as the binder between CN and MS, induces the interaction by forming hydrogen bonds, which contributes to the firm immobilization of powdery photocatalyst. The supported sample exhibits outstanding NO removal rate (58.90%) and extremely low NO2 generation rate (1.41%), and the mass loss rate of photocatalyst before and after reaction is less than 1%. The promotion mechanism of performance also has been elaborated. This work takes environmental risks as a prerequisite to propose a feasible strategy for perfecting the practical application of photocatalytic technology.

Unrecognized Role of Organic Acid in Natural Attenuation of Pollutants by Mackinawite (FeS): The Significance of Carbon-Center Free Radicals

Organic acid is prevalent in underground environments and, against the backdrop of biogeochemical cycles on Earth, holds significant importance in the degradation of contaminants by redox-active minerals. While earlier studies on the role of organic acid in the generation of reactive oxygen species (ROS) primarily concentrated on electron shuttle or ligand effects, this study delves into the combined impacts of organic acid decomposition and Mackinawite (FeS) oxidation in contaminant transformation under dark aerobic conditions. Using bisphenol A (BPA) as a model, our findings showed that oxalic acid (OA) notably outperforms other acids in enhancing BPA removal, attaining a rate constant of 0.69 h-1. Mass spectrometry characterizations, coupled with anaerobic treatments, advocate for molecule-O2 activation as the principal mechanism behind pollutant transformation. Comprehensive results unveiled that carbon center radicals, initiated by hydroxyl radical (•OH) attack, serve as the primary agents in pollutant oxidation, accounting for at least 93.6% of the total •OH generation. This dynamic, driven by the decomposition of organic acids and the concurrent formation of carbon-centered radicals, ensures a steady supply of electrons for ROS generation. The obtained information highlights the importance of OA decomposition in the natural attenuation of pollutants and offers innovative strategies for FeS and organic acid-coupled decontamination.

Green construction of metal- and additive-free citrus peel-derived carbon dot/g-C3N4 photocatalysts for the high-performance photocatalytic decomposition of sunset yellow

In this study, novel, metal-free, CP-derived CDs/g-C₃N₄ nanocomposites (CDCNs) were created by introducing citrus peel-derived carbon dots (CP-derived CDs) into graphite carbon nitride (g-C₃N₄) by a green hydrothermal method. The CDCNs were revealed to have superior photoelectrochemical properties relative to pristine g-C₃N₄ for the photocatalytic degradation of the food dye sunset yellow (SY) under visible light. For SY decomposition, the recommended catalyst contributed almost 96.3% to the photodegradation rate after 60 min of irradiation, showing satisfactory reusability, structural stability and biocompatibility. Moreover, a mechanism for enhanced photocatalytic SY degradation was proposed according to band analysis, free radical trapping and electron paramagnetic resonance (EPR) results. A possible pathway for SY photodegradation was also predicted from UV-visible (UV-Vis) spectroscopy and high-performance liquid chromatography (HPLC) results. The constructed nonmetallic nanophotocatalysts afford a novel route for the elimination of harmful dyes and for the resource conversion of citrus peels.

Modification of TiO2 by Er3+ and rGO enhancing visible photocatalytic degradation of arsanilic acid

As a typical wide band gap photocatalyst, titania (TiO₂) cannot use the visible light and has fast recombination rate of photogenerated electron-hole pairs. Simultaneous introduction of erbium ion (Er³⁺) and graphene oxide (rGO) into TiO₂ might overcome these two drawbacks. In this study, Er³⁺ and rGO were co-doped on TiO₂ to synthesize Er³⁺-rGO/TiO₂ photocatalyst through a two-step sol-gel method. Based on the UV-visible diffuse reflectance spectra and photoluminescence spectrum, the introduction of Er³⁺ and rGO increased the visible light absorption efficiency and enhanced the migration of photogenerated electron. Pure TiO₂ has almost no photocatalytic activity for arsanilic acid (p-ASA) degradation under visible light irradiation. However, while doping with 2.0 mol% Er³⁺ and 10.0 mol% rGO, the p-ASA could be completely degraded within 50 min by the Er³⁺-rGO/TiO₂ photocatalyst under visible light irradiation, and most of produced inorganic arsenic was in situ removed by adsorption from the solution. The reactive oxygen species (ROS) reacting with p-ASA was determined and superoxide radical (O₂^•-) and singlet oxygen (¹O₂) were the dominant ROS for the oxidation of p-ASA and arsenite. This work provides an approach of introducing Er³⁺ and rGO to enhance the visible light photocatalytic efficiency of TiO₂.

g-C3N4 as Photocatalyst for the Removal of Metronidazole Antibiotic from Aqueous Matrices under Lab and Pilot Scale Conditions

The presence of pharmaceuticals in water is a problem of utmost importance due to the various adverse effects that these compounds may have on aquatic organisms and also humans. Since conventional wastewater treatment plants fail to efficiently remove many of these compounds, new techniques such as heterogeneous photocatalysis have been developed that are capable of degrading them. In this study, graphitic carbon nitride (g-C3N4) was used as photocatalyst to remove metronidazole (MTZ), which is a widely prescribed antibiotic that has been reported as a potential carcinogen. The experiments were performed under lab and pilot scale conditions. During the lab scale experiments, 90.6% of the initial pharmaceutical concentration was removed after 360 min of irradiation and its removal followed a pseudo first order kinetic model with a degradation rate constant of k = 0.00618 min−1. Moreover, scavenging studies indicated that the indirectly produced hydroxy radicals contribute very little to the degradation mechanism. Through high precision mass spectrometry techniques, eight transformation products (TPs) were identified, and possible transformation pathways were suggested. Similarly, in the case of pilot scale experiments, 100 and 200 mg L−1 of g-C3N4 were used and the antibiotic’s removal also followed pseudo first order kinetics with k = 0.00827 min−1 and k = 0.00942 min−1, respectively. However, starting from low level inherent concentrations, only two TPs were identified. By using in silico tools (ECOSAR and T.E.S.T.), various ecotoxicological values were predicted for the TPs, which were generally found to be less toxic than the parent compound and with lower mutagenic and bioaccumulative potential. Moreover, the monitoring of the ecotoxicity with the in vitro Microtox bioassay showed that at the end of all the photocatalytic processes, the toxicity was reduced. In conclusion, this technique could have the potential to remove MTZ and other similar pharmaceuticals in full-scale applications. However, for this to happen with the highest possible efficiency, further studies must be conducted, focusing on improving the catalyst’s performance and reusability, improving the separation of catalyst as well as finding the optimum conditions for this process.

Multivalent Effect of Defect Engineered Ag2S/g-C3N4 3D Porous Floating Catalyst with Enhanced Contaminant Removal Efficiency

Chlorophenols, as a major environmental pollutant, enter water systems through industrial wastewater, agricultural runoff and chemical spills, and they are stable, persistent under natural conditions, and highly hazardous to water resources. The objective of this article is to prepare Ag2S-modified C3N4 three-dimensional network photocatalyst by calcination method to use photocatalysis as an efficient, safe, and environmentally friendly method to degrade chlorophenols. Ag2S/C3N4 has an excellent visible light absorption range, low band gap, effective separation of photogenerated charges, and active free radicals production, all of which make for the enhancement of photocatalytic degradation performance of the Ag2S/C3N4 system. Under the light irradiation (λ ≥ 420 nm), the photocatalytic degradation efficiency of 2,4,6-Trichlorophenol reach 95% within 150 min, and the stable photocatalytic degradation activity can still be maintained under different pH water environment and four degradation cycles. When Ag2S is loaded on ACNs, more photogenerated electrons are generated and subsequent reactions produce highly reactive groups such as •O2- and •OH that will originally be able to continuously attack TCP molecules to degrade pollutants. Therefore, this study shows that the photocatalyst provides a novel research approach for realizing the application in the field of pollutant degradation.

Facet-Dependent Activation of Oxalic Acid over Magnetic Recyclable Fe3S4 for Efficient Pollutant Removal under Visible Light Irradiation: Enhanced Catalytic Activity, DFT Calculations, and Mechanism Insight

Photo-Fenton-like reaction based on oxalic acid (OA) activation is a promising method for the fast degradation of pollutants due to the low cost and safety. Hence, the magnetic recyclable greigite (Fe₃S₄) with the exposed {011} facet (FS-011) was prepared using a facile one-pot hydrothermal method and activated OA under visible light irradiation for pollutant removal, in which the removal efficiency values of FS-011 for metronidazole (MNZ) and hexavalent chromium were 2.02 and 1.88 times higher than that of Fe₃S₄ with the exposed {112} facet, respectively. Density functional theory calculations revealed that OA was more easily adsorbed by the {011} facet of Fe₃S₄ than by the {112} facet, and the in situ-generated H₂O₂ preferred to diffuse away from the active sites of the {011} facet of Fe₃S₄ than from that of the {112} facet, which was conducive to the continuous adsorption and efficient activation of OA. Moreover, the analyses of Fukui index and dual descriptor confirmed the degradation mechanism that the imidazole ring of MNZ was easy to be attacked by electrophilic species, while the amino group of MNZ was easy to be attacked by nucleophilic species. These findings deeply analyzed the mechanism of enhanced OA activation by facet engineering and consolidated the theoretical basis for practical application of Fenton-like reactions.

Confined Construction of Ultrasmall Molybdenum Disulfide-Loaded Porous Silica Particles for Efficient Tumor Therapy

Recently, molybdenum sulfide (MoS₂) has shown great application potential in tumor treatment because of its good photothermal properties. Unfortunately, most of the current molybdenum disulfide-based nanotherapeutic agents suffer from complex preparation processes, low photothermal conversion efficiencies, and poor structural/compositional regulation. To address these issues, in this paper, a facile "confined solvothermal" method is proposed to construct an MoS²-loaded porous silica nanosystem (designated as MoS₂@P-hSiO₂). The maximum photothermal efficiency of 79.5% of molybdenum-based materials reported in the literature at present was obtained due to the ultrasmall MoS₂ nanoclusters and the rich porous channels. Furthermore, both in vitro and in vivo experiments showed that the cascade hybrid system (MoS₂/GOD@P-hSiO₂) after efficient loading of glucose oxidase (GOD) displayed a significant tumor-suppressive effect and good biosafety through the combined effects of photothermal and enzyme-mediated cascade catalytic therapy. Consequently, this hybrid porous network system combining the in situ solvothermal strategy of inorganic functional components and the efficient encapsulation of organic enzyme macromolecules can provide a new pathway to construct synergistic agents for the efficient and safe treatment of tumors.

A Flexible and Weavable Lignocellulose-Based Photocatalyst Supported by Natural Three-Dimensional Porous Juncus effusus for Highly Efficient Degradation of Environmental Contaminants

Lignocellulosic biomass is a potential biotemplate for disposing the burden of the uncontrollable accumulation of environmental contaminants disrupting the hydrophytic ecosystems. Herein, an efficient solar-driven catalyst was prepared using a natural three-dimensional (3D) porous lignocellulose-based Juncus effusus (JE) fiber for wastewater treatment. Owing to the exquisite 3D microstructure and abundant hydroxyl groups, the two-dimensional lamellar graphitic carbon nitride/graphene oxide (g-C₃N₄/GO) nanocomposites were successfully synthesized and decorated on the carboxymethylated JE fiber via the electrostatic self-assembly method. The as-prepared g-C₃N₄/GO-JE (CNG-JE) photocatalyst exhibits excellent light absorption efficiency and a superior ability to accelerate photogenerated electron migration. The outstanding adsorption performance toward pollutants also contributes to the photodegradation property of CNG-JE, showing highly efficient degradation of C.I. Reactive Red 120 (99.8%), C.I. Acid Yellow 11 (99.8%), methylene blue (99.4%), Cr(VI) (98.8%), and tetracycline (87.2%). Most importantly, the lignocellulose-based CNG-JE fibers could be fabricated into a photocatalyst textile due to their flexible and weavable properties. In actual application, the CNG-JE textile can be reused for at least five cycles under the sun, demonstrating that the flexible CNG-JE textile is practical and recyclable. This study may provide a platform for constructing efficient, flexible, and weavable biomass-based porous materials for cost-effective and sustainable catalytic applications.

Hydrothermal carbonation carbon-based photocatalysis under visible light: Modification for enhanced removal of organic pollutant and novel insight into the photocatalytic mechanism

Hydrothermal carbonation carbon (HTCC) is emerging as a promising alternative for photocatalytic removal of contaminants from water. However, the catalytic activity of HTCC is limited by its poor charge transfer ability, and its photocatalytic mechanism remains unclear. Herein, a unique photosensitization-like mechanism was firstly found on Fe modified HTCC (Fe-HTCC) derived from glucose for effective removal of organic pollutants. Under visible light illumination, the organic pollutant coordinated with Fe-HTCC enabled electrons transfer from its highest occupied molecular orbital (HOMO) to conduction band (CB) of Fe-HTCC, which not only oxidized pollutant itself, but also generated oxygen-centered radical for reducing O₂ into O₂^•- towards pollutant removal. The degradation kinetic constant of sulfamethoxazole (SMX) over Fe-HTCC was about 1024.4 and 20.5 times higher than that of HTCC and g-C₃N₄, respectively. The enhanced performance of Fe-HTCC was originated from dual role of Fe modification: one is to boost the electron-deficient C sites which prefer to coordinate with amino or hydroxyl of pollutants; the other is to enhance the linkage of discrete polyfuran chains in Fe-HTCC for effective electron transfer from pollutant to Fe-HTCC. This work provides new insight into the synthesis and mechanism of HTCC-based high-efficiency photocatalyst for water decontamination.

Innovative green/non-toxic Bi2S3@g-C3N4 nanosheets for dark antimicrobial activity and photocatalytic depollution: Turnover assessment

Herein, green and non-toxic bismuth sulphide@graphitic carbon nitride (Bi₂S₃@g-C₃N₄) nanosheets (NCs) were firstly synthesized by ultrasonicated-assisted method and characterized with different tool. Bi₂S₃@g-C₃N₄ NCs antimicrobial activity tested against three types of microbes. As well the heterostructured Bi₂S₃@g-C₃N₄ NCs was investigated for removing dye and hexavalent chromium under visible light and showed high efficiency of photocatalytic oxidation/reduction higher than g-C₃N₄ alone, attributing to lower recombination photogenerated electron-hole pairs. Bi₂S₃@g-C₃N₄ NCs showed high antimicrobial efficiencies against Staphylococcus aureus (S. aureus) as a Gram positive bacterium, Escherichia coli (E. Coli)as a Gram negative bacterium and Candida albicans (C. albicans) and that the disinfection rates are 99.97%, 99.98% and 99.92%, respectively. The core mechanism is that the bacterial membrane could be destroyed by reactive oxygen species. The Bi₂S₃@g-C₃N₄ NCs is promising for environmental disinfection including water and public facilities disinfection and solar photocatalytic depollution. Turnover number (TON) and Turnover frequency (TOF) are used as concise assessment indicator for photocatalytic efficiency.

New insights into the role of sulfite in BiOX photocatalytic pollutants elimination: In-operando generation of plasmonic Bi metal and oxygen vacancies

Photocatalysis has been regarded as a sustainable strategy for wastewaters remediation, and sulfite addition could significantly accelerate the photocatalytic performances. However, the related mechanisms are still not well understood. Here, we for the first time found that plasmonic Bi and oxygen vacancies were in-operando generated on BiOX (X = Cl, Br, I) in the presence of sulfite under light irradiation. The oxidative degradation rate constants of 4-nitrophenol, bisphenol A, and phenol were improved by about 11.5, 4.7, and 12.2 times on BiOBr and 9.1, 1.6, and 3.1 times on BiOCl with addition of 5 mM sulfite, while the photocatalytic reduction rate of 4-nitrophenol to 4-aminophenol was promoted by approximate 31.7 times on BiOI. The results indicated that sulfite could improve the photooxidation ability of BiOBr and BiOCl and the photoreduction performance of BiOI, resulted from the improved light absorption and separation of photogenerated charge carriers. This work can provide exploratory platforms for understanding and maximizing the sulfite-assisted BiOX photocatalysis.

Graphitic carbon nitride embedded with graphene materials towards photocatalysis of bisphenol A: The role of graphene and mediation of superoxide and singlet oxygen

Composite photocatalysts comprising graphitic carbon nitride (g-C₃N₄) and graphene materials were synthesized and evaluated in the photocatalysis of bisphenol A (BPA) with a focus on elucidating the reaction mechanism. Embedding reduced graphene oxide (rGO) to g-C₃N₄ significantly accelerated the photocatalysis rate of BPA by three folds under visible light irradiation at neutral pH. We showed that rGO synthesized in intimate contact with g-C₃N₄ increased the surface areas and electrical conductivity of the g-C₃N₄ composites and promoted the electron-hole pair separation. The BPA photodegradation mechanism involved selective oxidants as superoxide (O₂^•-) and singlet oxygen (¹O₂) that were formed through one-electron reduction of O₂ and the unique oxidation of O₂^•- by photogenerated hole (h⁺), respectively. The synthesized photocatalyst exhibited superior visible light photoreactivity to that of N-doped P25 TiO₂, good photo-stability and reuse potential, and was operative in complex wastewater. rGO embedded g-C₃N₄ achieved good photomineralization of BPA at 80% in 4 h compared to 40% of bare g-C₃N₄. This study sheds light on the photocatalysis mechanism of BPA with a metal-free, promising rGO/g-C₃N₄ photocatalyst.

The degradation of enrofloxacin by a non-metallic heptazine-based OCN polymer: Kinetics, mechanism and effect of water constituents

Antibiotics are widespread in the environment with notable ecological risk, for which efficient and green removal technologies are demanded. As a kind of g-C₃N₄-based material with remarkable photocatalytic property, OCN is an oxygen- and nitrogen-linked carbon nitride organic polymer which can be synthesized through a single-step thermal polymerization method. In this study, OCN was applied for the visible-light-driven photocatalytic degradation of a typical fluoroquinolone (FQ) antibiotics enrofloxacin (ENR). The photocatalysis process achieved over 97% ENR removal within 60 min with 0.4 mg/L OCN and 4 mg/L ENR at pH 8.2. The photocatalytic mechanism of OCN at different pH was studied for the first time. It was shown that O₂^⋅-, ¹O₂ and h⁺ made contributions at neutral or basic pH and ¹O₂ contributes the most (57.6% at pH 8.2), while ⋅OH played a role only under acidic condition with a contribution rate of 23.8% at pH 3.2. The cleavage of the piperazine ring and the quinolone ring were two main degradation pathways. The common water constituents humic acid and NO₃^- showed a dual effect, but HCO₃^- and Cl^- inhibited the degradation. The effect of different water matrices was tested under natural sunlight and it was only a tiny disturbance to the degradation rates. The biotoxicity test conducted using Vibrio fischeri indicated that the toxicity of degradation products became negligible after 3 h. This study demonstrated that OCN is a promising candidate for the advanced treatment and in-situ remediation.

Visible-Light-Driven Photocatalytic Water Disinfection Toward Escherichia coli by Nanowired g-C3N4 Film

Graphitic carbon nitride (g-C3N4) as metal-free visible light photocatalyst has recently emerged as a promising candidate for water disinfection. Herein, a nanowire-rich superhydrophilic g-C3N4 film was prepared by a vapor-assisted confined deposition method. With a disinfection efficiency of over 99.99% in 4 h under visible light irradiation, this nanowire-rich g-C3N4 film was found to perform better than conventional g-C3N4 film. Control experiments showed that the disinfection performance of the g-C3N4 film reduced significantly after hydrophobic treatment. The potential disinfection mechanism was investigated through scavenger-quenching experiments, which indicate that H2O2 was the main active specie and played an important role in bacteria inactivation. Due to the metal-free composition and excellent performance, photocatalytic disinfection by nanowire-rich g-C3N4 film would be a promising and cost-effective way for safe drinking water production.

More reactive oxygen species generation facilitated by highly dispersed bimodal gold nanoparticle on the surface of Bi2WO6 for enhanced photocatalytic degradation of ofloxacin in water

An essential strategy to eliminate emerging contamination in water is to initiate more reactive oxygen species (ROS) in the catalytic systems. 0.14 wt.% Au loaded Bi₂WO₆ (Bi₂WO₆/Au-400 °C) was fabricated after 400 °C annealing with the assistance of glutathione for Au atom anchoring and stabilization on Bi₂WO₆ surface. Bimodal Au size distribution of highly dispersed small size clusters (0.5 ± 0.1 nm) and large size nanoparticles (6.3 ± 1.0 nm) simultaneously existed on Bi₂WO₆ nanosheets in Bi₂WO₆/Au-400 °C, which were verified through high resolution transmission electron microscopy (HR-TEM). 95% of ofloxacin (OFX) was degraded over Bi₂WO₆/Au-400 °C in 180 min under visible light irradiation with a reaction constant of 24.5 × 10^-3 min^-1, which showed 3.0 and 2.5-fold enhancement compared with bare Bi₂WO₆ and unimodal Bi₂WO₆/Au-500 °C (annealed at 500 °C, Au NPs (8.6 ± 1.0 nm)), respectively. The enhanced catalytic activity originated from the additional ROS production that initiated by photo-induced electron transported from small Au clusters to large Au NPs through the conduction band of Bi₂WO₆. Moreover, it still maintained a good stability after five cycling performance and the total cost of 10 g Bi₂WO₆/Au-400 °C was estimated to be 6.78 $. Lower-content of bimodal Au NPs decorated Bi₂WO₆ catalyst possesses high efficiency to degrade pollutant and lower cost, which provides a promising alternative in practical environmental remediation by photocatalysis.

Performance and Mechanism of Photocatalytic Toluene Degradation and Catalyst Regeneration by Thermal/UV Treatment

This work presents a new strategy for industrial flue gas purification with TiO₂-based photocatalysis technology, which could be achieved by a novel dual-stage circulating photocatalytic reactor. A lab-scale fixed bed reactor is utilized to investigate the performance of photocatalytic toluene degradation and inactive catalyst regeneration by thermal/UV treatment. The relationships between operational conditions and toluene oxidation are surveyed and discussed in detail. The results show that the intermediates could be further removed and decomposed by introducing UV radiation, compared with heat treatment alone. To reveal the photocatalytic mechanism and identify the accumulated intermediates over anatase TiO₂, the adsorbed toluene and aromatic intermediates are identified by XPS, in situ DRIFTS, and on-line MS. The aromatic ring and other covalent bonds (C═O, C-O, and O-H) are detected during photocatalytic oxidation. The reaction pathway involving hydrogen abstraction is referred as the dominant pathway for toluene degradation, and ring opening via ·OH radicals is crucial to make aromatic intermediates change into CO₂ and H₂O. The results indicate that benzoic acid and benzaldehyde are the main accumulation because of their high reaction energy. A possible reaction mechanism is proposed for toluene oxidation, deactivation, and regeneration of catalysts, which has a significant value for guiding the practical applications.