Evaluation of an Imidazolium-Based Porous Organic Polymer as Radioactive Waste Scavenger

Efficient removal of perrhenate/pertechnetate by a pyridinium-based porous polymer

The extraction of 99TcO4- from radioactive effluents is extremely crucial for the purposes of nuclear disposal and environmental remediation. Herein, utilizing a facile and low-cost synthesis method, we report a pyridinium-based cationic polymer network, CPP-Cl, with impressive adsorption performance and ultrafast adsorption kinetics towards ReO4-. The structure featuring highly density of charged pyridinium units was synthesized, making it an effective adsorbent for capturing ReO4-. The material showed fast ReO4- adsorption kinetics reaching adsorption equilibrium within 30 s, an excellent capture capability of 1069.7 mg/g, and exceptional separation efficiency of 94.3% for removing 1000 ppm ReO4-. Furthermore, it possessed excellent reusability in multiple sorption/desorption trials and good uptake capacity within a widely ranging pH values. It is noteworthy that the extraction efficiency of CPP-Cl for ReO4- from simulated nuclear waste can be up to 94.2%. The favorable performance of the material in multiple tests revealed that CPP-Cl has tremendous potential as a high-efficiency sorbent for capturing 99TcO4-/ReO4- in complex nuclear associated environmental systems.

Alkyl modified cationic COFs for preferential trapping of charge dispersed perrhenate: Synergistic hydrophobicity and anion-recognition effects

Charge dispersed oxoanionic pollutants (such as TcO4- and ReO4-) with low hydrophilicity are typically difficult to be preferentially extracted. Recently, cationic covalent organic frameworks (COFs) have received considerable attention for anions trapping. Two cationic COFs, denoted as Tp-S and Tp-D, were synthesized by incorporating ethyl and cyclic alkylated diquats into 2,2'-bipyridine-based COF. A synergistic effect of hydrophobic channel and anion-recognition sites were achieved by branched chains, which effectively surmounted the Hofmeister bias. Both Tp-S and Tp-D exhibited raising removal performance for surrogate ReO4- at high acidity with adsorption capacities of 435.6 and 291.4 mg g-1, respectively. Obvious variations caused by side chains were displayed in microstructures and adsorption performance. Specially, compared with Tp-D, Tp-S demonstrated desirable priority in uptake capacity and selectivity. In a real-scenario experiment, Tp-S could remove 72.8 % of ReO4- in a simulated Hanford LAW stream, which was attributed to the spatial effects and charge distribution arising from the open and flexible side chains of Tp-S. Otherwise, the rigid cyclic chains endowed pyridine-base Tp-D material an unprecedented alkaline stability. Spectra and theoretical calculations revealed a mechanism of preferential capture based on electrostatic interaction and hydrogen bonding between charge dispersed ReO4-/TcO4- and Tp-S/Tp-D. This work provides an innovative perspective to tailored materials for the treatment of oxoanionic contaminants.

Ultrafast and selective capture of 99TcO4-/ReO4- from wastewater by hyper-branched quaternary ammonium group-functionalized resin

99Tc primarily exists high mobility in the natural aqueous environment due to its extremely high solubility and non-complexing features, which can easily cause radioactive pollution. We herein report a general strategy for constructing a novel resin (SiPAN-PEI) with multiple positive charges nitrogen, exhibiting ultrafast adsorption kinetics (< 3 min), superior adsorption capacities (463.96 mg g-1), and excellent selectivity in the presence of excess competitive anions, which exceed those of most commercial resins. Moreover, based on impressive structure stability in extreme conditions, SiPAN-PEI can still maintain superior adsorption abilities after suffering irradiation, calcination, and immersion in strong acid. In addition, the separation performance kept excellently after five loading-washing-eluting cycles and the total adsorption ratio can still reach 97 %. Outstandingly, SiPAN-PEI can remove most of ReO4- from simulated nuclear wastewater through a sequential injection automatic separation system and can reduce the concentration of ReO4- to the maximum concentration standard set by the World Health Organization (WHO) in a short time. Leveraging density functional theory calculations and other characteristics clearly elucidated adsorption mechanism of anion-exchange between Cl- and TcO4-/ReO4-. In terms of superior adsorption property, SiPAN-PEI is demonstrated to be a pretty candidate for 99Tc elimination from wastewater.

Synthesis and performance of guanidinium-based cationic organic polymer for the efficient removal of TcO4-/ReO4. JOURNAL OF HAZARDOUS MATERIALS 2024;466:133602. [PMID: 38286051 DOI: 10.1016/j.jhazmat.2024.133602] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Cationic organic polymers have found relatively extensive utility for TcO4-/ReO4- removal, but the harsh preparation conditions constrain their practical application. The bifunctional guanidinium-based cationic organic polymer (GBCOP) was successfully and facilely synthesized in benign conditions within 1 h. Batch experiments showed that GBCOP exhibited rapid removal kinetics (1 min, >98.0%) and a substantial removal capacity of 536.8 mg/g for ReO4-. Even in 1000-fold co-existing NO3- anions, the removal efficiency of GBCOP for ReO4- was 74.0%, indicating its good selectivity. Moreover, GBCOP had high removal efficiencies for ReO4- across a wide pH (3.0-10.0) range and presented remarkable stability under the conditions of strong acid and base. GBCOP could be reused four times while removing 80.8% ReO4- from simulated Hanford wastewater. SEM and XPS results revealed that the mechanism of ReO4- removal involved Cl- ion exchange within the channels of GBCOP. Theoretical calculation results supported that existing the strong electrostatic interaction between guanidinium and ReO4-. This dual-function GBCOP material is cost-effective and holds significant potential for large-scale preparation, making it a promising solution for TcO4- removal from nuclear wastewater.

Post-Modification of a Robust Covalent Organic Framework for Efficient Sequestration of 99 TcO4 - /ReO4. Chemistry 2023;29:e202302168. [PMID: 37534580 DOI: 10.1002/chem.202302168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Nuclear industry spent fuel reprocessing and some radioactive contamination sites often involve high acidity and salinity environments. Currently developed and reported sorbents in 99 TcO4 - sequestration from the nuclear waste are unstable and show low adsorption efficiency in harsh conditions. To address this issue, we developed a post-synthetic modification strategy by grafting imidazole-based ionic liquids (ILs) onto the backbone of covalent organic framework (COF) via vinyl polymerization. The resultant COF-polyILs sorbent exhibits fast adsorption kinetics (<5 min) and good sorption capacity (388 mg g-1 ) for ReO4 - (a nonradioactive surrogate of 99 TcO4 - ). Outstandingly, COF-polyILs composite shows superior ReO4 - removal even under highly acidic conditions and in the presence of excess competing ions of Hanford low-level radioactive waste stream, benefiting from the stable covalent bonds between the COF and polyILs, mass of imidazole rings, and hydrophobic pores in COF.

CTAB assisted evaporation-induced self-assembly to construct imidazolium-based hierarchical porous covalent organic polymers for ReO4-/TcO4- removal

Evaporation-induced self-assembly method (EISA) was a facile and reliable method to synthesize porous materials. Herein, we report a kind of hierarchical porous ionic liquid covalent organic polymers (HPnDNH₂) under cetyltrimethylammonium bromide (CTAB) assisted by EISA for ReO₄^-/TcO₄^- removal. Unlike covalent organic frameworks (COFs), which usually needed to be prepared in a closed environment or with a long reaction time, HPnDNH₂ in this study was prepared within 1 h in an open environment. It was worth noting that CTAB not only served as a soft template for forming pore, but also induced ordered structure, which was verified by SEM, TEM, and Gas sorption. Benefit from its hierarchical pore structure, HPnDNH₂ exhibited higher adsorption capacity (690.0 mg g^-1 for HP1DNH₂ and 808.7 mg g^-1 for HP1.5DNH₂) and faster kinetics for ReO₄^-/TcO₄^- than 1DNH₂ (without employing CTAB). Additionally, the material used to remove TcO₄^- from alkaline nuclear waste was seldom reported, because combining features of alkali resistance and high uptake selectivity was not easy to achieve. In this study, in the case of HP1DNH₂, it displayed outstanding adsorption efficiency toward aqueous ReO₄^-/TcO₄^- in 1 mol L^-1 NaOH solution (92%) and simulated Savannah River Site High-level waste (SRS HLW) melter recycle stream (98%), which could be a potentially excellent nuclear waste adsorbing material.

Ultra-stable 3D pyridinium salt-based polymeric network nanotrap for selective 99TcO4-/ReO4- capture via hydrophobic and steric engineering

Selective capture of radioactive ⁹⁹TcO₄^- from highly alkaline nuclear waste is highly desirable for environmental remediation and waste disposal. However, the combined features of adsorbents with excellent chemical stability and high capture selectivity for ⁹⁹TcO₄^- have not yet been achieved. Herein, we report an ultra-stable 3D pyridinium salt-based polymeric network (TMP-TBPM) nanotrap with remarkable radiation, acid and base stability for selective capture of ReO₄^- via hydrophobic engineering and steric hindrance, a non-radioactive surrogate of ⁹⁹TcO₄^-. The batch capture experiments show that TMP-TBPM has high capture capacity (918.7 mg g^-1) and fast sorption kinetics (94.3 % removal in 2 min), which can be attributed to the high density of pyridinium salt-based units on the highly accessible pore channels of 3D interconnected low-density skeleton. In addition, the introduction of abundant alkyl and tetraphenylmethane units into the 3D framework not only greatly enhanced the hydrophobicity and stability of TMP-TBPM, but also significantly improved the affinity toward ⁹⁹TcO₄^-/ReO₄^-, enabling reversible and selective capture of ⁹⁹TcO₄^-/ReO₄^- even under highly alkaline conditions. This study exhibits the great potential of 3D pyridinium salt-based polymeric network nanotrap for ⁹⁹TcO₄^-/ReO₄^- capture from highly alkaline nuclear waste, providing a new strategy to construct high-performance cationic polymeric sorbents for radioactive wastewater treatment.

Synthesis of cationic polymer decorated with halogen for highly efficient trapping 99TcO4-/ReO4. JOURNAL OF HAZARDOUS MATERIALS 2023;443:130325. [PMID: 36372023 DOI: 10.1016/j.jhazmat.2022.130325]

The elimination of anion is of great importance from radioactive nuclear waste containing ⁹⁹TcO₄^- by rationally designing anion-scavenging materials with high density of charge and more accessible adsorption sites. Herein, a tailor-made cationic organic polymer with donor-acceptor (D-A) structure, namely TrDCPN, was successfully synthesized by rationally modifying the benzimidazole unit for efficient trapping the perrhenate (ReO₄^-) as a ⁹⁹Tc surrogate. Systematic control of the skeleton affect enables the material to integrate a variety of features, surmounting the long-term challenge of ⁹⁹TcO₄^-/ReO₄^- remediation under extreme conditions of high acid/base and high ionic strength. Furthermore, the TrDCPN shows excellent affinity toward ReO₄^- in the existence of large excess of competitive anions (SO₄^2-, NO₃^- and PO₄^3-etc.) as well as promising reusability for trapping ReO₄^-. The excellent stability and separation were derived from the introduction of large conjugated modules, triazine core and hydrophobic. More importantly, the synthetic cationic organic polymer with D-A feature was first proved that the introduction of halogen can effectively enhance the backbone charge, and increase the adsorption capacity by synergy of ion exchange, electrostatic interaction and δ hole-anion interaction. The adsorption capacity of TrDCPN can be up to 420.3 mg/g and reach equilibrium within 20 min. It is noteworthy that TrDCPN successfully immobilizes ReO₄^- from simulated Hanford waste with a high separation efficiency of 93 %, providing a new paradigm for material design to dispose of the problem of radioactive pollutants in the environment.

Efficient design of peptide-binding polymers using active learning approaches

Active learning (AL) has become a subject of active recent research both in industry and academia as an efficient approach for rapid design and discovery of novel chemicals, materials, and polymers. Herein, we have assessed the applicability of AL for the discovery of polymeric micelle formulations for poorly soluble drugs. We were motivated by the key advantages of this approach making it a desirable strategy for rational design of drug delivery systems due toto its ability to (i) employ relatively small datasets for model development, (ii) iterate between model development and model assessment using small external datasets that can be either generated in focused experimental studies or formed from subsets of the initial training data, and (iii) progressively evolve models towards increasingly more reliable predictions and the identification of novel chemicals with the desired properties. In this study, we compared various AL protocols for their effectiveness in finding biologically active molecules using synthetic datasets. We have investigated the dependency of AL performance on the size of the initial training set, the relative complexity of the task, and the choice of the initial training dataset. We found that AL techniques as applied to regression modeling offer no benefits over random search, while AL used for classification tasks performs better than models built for randomly selected training sets but still quite far from perfect. Using the best performing AL protocol,. Finally, the best performing AL approach was employed to discover and experimentally validate novel binding polymers for a case study of asialoglycoprotein receptor (ASGPR).

An alkali-resistant metal-organic framework as halogen bond donor for efficient and selective removing of ReO4-/TcO4. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022;29:86815-86824. [PMID: 35794336 DOI: 10.1007/s11356-022-21870-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

⁹⁹Tc is one of the most problematic nuclear fuel products due to its long half-life and high environmental mobility. Direct removal of TcO₄^- from the highly alkaline solution of nuclear fuel is a serious and challenging environmental issue. In this work, the first efficient synthetic approach introducing halogens into a two-dimensional metal-organic framework, named Mn-MOF, is established using MnCl₂·4H₂O coordinating with neutral nitrogen-donor ligand, showing ultrahigh stability in alkaline aqueous even under 1 M NaOH. The luxuriant Mn-Cl bonds and ordered hydrophobic pore channels enable the Mn-MOF to have an efficient adsorption capacity for ReO₄^- with a large capacity (403 mg g^-1), which is higher than most MOF adsorbents. More importantly, the Mn-MOF shows an excellent selectivity toward ReO₄^- in high-density competitive anions, such as NO₃^- and SO₄^2-. Moreover, the outstanding performance of Mn-MOF in removing ReO₄^- endowed it successfully separated ReO₄^- from the simulated Savannah River Site (SRS) high-level waste (HLW) stream with high removal of 66.84% at the phase ratio of 10. The adsorption mechanism is further demonstrated by FT-IR, XPS analysis, and DFT calculation, showing that the ReO₄^- can selectively interact with Mn-Cl bonds and imidazole groups, forming unique halogen bonds Cl-O-Re, and a series of hydrogen bonds, respectively. This work suggests a new approach to the removal of TcO₄^- from nuclear fuel.

A Novel Functionalized Ionic Liquid for Highly Selective Extraction of TcO4. Inorg Chem 2022;61:10609-10617. [PMID: 35758888 DOI: 10.1021/acs.inorgchem.2c01775]

Due to the highly acidic and high-salinity nature of the high-level radioactive waste liquid (HLLW), selective extraction of TcO₄^- from HLLW remains to be a challenging task. Traditional anion exchangers show low selectivity and unsatisfactory extraction performance due to the lack of functional groups that can interact strongly with TcO₄^-. In this work, a tailor-made binding site was constructed by decorating two acetamide functional groups on imidazolium cation to fabricate a new Tc separation material, which exhibits high selectivity. Unlike most reported Tc separation materials, which can only perform well under low acidic, neutral, or alkaline conditions, this material still has good extraction performance in highly acidic solutions. In the simulated high-level waste liquid of 3 M nitric acid, the extraction efficiency of 0.5 mol/L organic phase for Tc can reach 96.5% through the first-stage extraction. Our theoretical simulations suggest that ReO₄^-/TcO₄^- anions were adsorbed on the top of the imidazolium ring during the extraction process, with p-π and p-p interactions acting as the driving forces.

Covalent organic frameworks functionalized electrodes for simultaneous removal of UO22+ and ReO4- with fast kinetics and high capacities by electro-adsorption

The recovery of radioactive ions from high salinity low-level radioactive wastewater (LLRW) is important for the sustainable utilization of nuclear energy. Previous work primarily focuses on developing adsorbents that remove individual types of ions via physicochemical adsorption. Here, we report a new strategy for the simultaneous recovery of uranium (UO₂²⁺) and rhenium (ReO₄^-) as a non-radioactive surrogate of technetium from LLRW via electro-adsorption. Carboxyl functionalized covalent organic frameworks (COF-1) and cationic covalent organic frameworks (COF-2) were prepared as cathode and anode materials, respectively. The adsorption capacities were 411 mg U/g for COF-1 and 984 mg Re/g for COF-2 under 1.2 direct-current (DC) volts, 2.5 and 2.1 times higher than the capacities of the same adsorbents obtained by physicochemical adsorption. We also found that the electro-adsorption of uranium and rhenium follows pseudo-second-order kinetics with the adsorption rates of 0.45 and 1.05 g/mg/h at pH 7.0 and 298.15 K, again two times faster than those measured in physicochemical adsorption. Therefore, electro-adsorption improves both adsorption capacity and kinetics by maximizing the utility of available active sites in adsorbents and facilitating ion migration towards the adsorbents. The adsorption efficiencies for uranium and rhenium reached 65.9% and 89.2%, respectively, after electro-adsorption for 2 h. The high efficiencies can be maintained after five adsorption-desorption cycles. Furthermore, the electrodes showed high selectivity for uranium(VI) and rhenium(VII) and excellent salt resistance even in 1 mol/L NaCl solution. XPS studies revealed that covalent bonds were formed between uranium(VI) and carboxyl groups on COF-1, and rhenium(VII) was bound to cationic COF-2 through electrostatic interaction. Our asymmetric electrodes design can be extended to simultaneously and efficiently remove other types of radioactive or heavy metal ions from wastewater.

Three porous shapeable three-component hydrogen-bonded covalent-organic aerogels as backfill materials in a simulated permeable reactive barrier (PRB) for trapping levofloxacin

Levofloxacin (LEV) infiltrated in groundwater has threatened the safety of drinking water. For in-situ remediation of LEV-contaminated groundwater, there exists a main challenge of exploiting proper high efficient backfill medium in utilizing charming permeable reactive barriers (PRBs). Herein, three porous shapeable three-component hydrogen-bonded covalent organic aerogels (H_COA-1, H_COA-2 and H_COA-3) were fabricated based on a multiple-linking-site strategy to evaluate for adsorptive removal of LEV. The three H_COAs exhibited satisfactory performance in LEV adsorption that could integrate high adsorption capacity, good antiion interference, excellent recyclability and wide pH tolerance. The different regularity of kinetics and isotherms of three H_COAs signified that electrostatic effect, pore preservation, hydrogen bonding probably govern the adsorption process in combination, coupling with π-π electron-donor-acceptor (EDA), dipole-dipole and hydrophobic-hydrophobic interaction besides. In addition, the response surface methodology (RSM) was employed for studying the single and synergetic effects of selected variables and optimizing operation conditions. Furthermore, a laboratory PRB column packed with processable H_COA-2 was set up to investigate the LEV removal, and the breakthrough data was explained by Adams-Bohart, Thomas, BDST and Yoon-Nelson models. We believe could hopefully bring H_COAs into the real in-situ remediation of such challenging and persistent LEV-polluted groundwater with further massive-scale efficiently.

Immersion grinding and in-situ polymerization synthesis of poly(ionic liquid)s incorporation into MOF composites as radioactive TcO4- scavenger

Imidazolium-based ionic liquids (ILs) are a promising candidate for efficient separation of radioactive pertechnetate (TcO₄^-) from nuclear waste. However, their effective fixation, availability of active sites and slow adsorption kinetics remain challenges. Here, we incorporated the bisimidazolium-based ILs into porous metal-organic frameworks (MOFs) via a combination of immersion grinding and in-situ polymerization. 3,3'-divinyl-1,1'(1,4-butanediyl) diimidazolium dichloride is tightly bound inside and outside the porous MOFs matrix by uniform immersion grinding, which facilitates the exposure of more adsorption sites and provides channels for the anions to travel through quickly. Solvent-free polymerization reduces environmental pollution and energy consumption. Notably, the composite P[C₄(VIM)₂]Cl₂@MIL-101 possesses an admirable removal efficiency (673 mg g^-1) compared with the pristine poly(ionic liquid)s (215 mg g^-1). Meanwhile, it exhibits fast sorption kinetics (92% in 2 min), good β and γ radiation-resistance, excellent regeneration and eminent removal efficiency in high alkaline conditions (83%). These superior traits endow that P[C₄(VIM)₂]Cl₂@MIL-101 effectively separated TcO₄^- from simulated Hanford Low-activity Waste (LAW) Melter off-gas scrubber solution tested in this work. DFT density functional theory confirms that the strong electrostatic attraction and minimum Gibbs free energy (-6.2 kcal mol^-1) achieve high selective adsorption for TcO₄^-. P[C₄(VIM)₂]Cl₂@MIL-101 demonstrates the considerable potential to remove TcO₄^- from radioactive contaminants.

Efficient collection of perrhenate anions from water using poly(pyridinium salts) via pyrylium mediated transformation

Poly(pyridinium salts) composed of cationic pyridinium groups with benzene-rich motifs demonstrated high efficiency and selectivity in the capture of ReO4− from SO42− containing water.

Highly Efficient Uptake of TcO4 - by Imidazolium-Functionalized Wood Sawdust

99Tc is a radioactive fission product, mainly in the form of TcO4 -, with good solubility and mobility in the environment. The development of effective and inexpensive materials to remove TcO4 - from nuclear industry wastewater or contaminated water is significant. Wood sawdust is a byproduct of the wood processing industry and is an abundant, low-cost, and sustainable material. The mesostructure of wood consists of numerous hollow cells that are joined endwise to form an interconnected channel matrix capable of rapid transfer of ions. Imidazolium-functionalized wood sawdust (IM-WS) was synthesized using natural wood sawdust by a two-step reaction. It has excellent properties of TcO4 -/ReO4 - adsorption including rapid adsorption dynamics (30 s to equilibrium), good adsorption stability (pH 3-9), high selectivity (adsorption of 45.4 Re % in 1000 times excess of NO3 - ions, 76.6 Re % in 6000 times excess of SO4 2- ions, and 92.2 Tc % in a simulated mixed solution; after adsorption, the concentration of TcO4 - decreased to 0.056 ppb from the initial concentration of 12.09 ppb in 1000 times excess of SO4 2-), and in particular low production costs. These characteristics give it great prospects for low-level radioactive wastewater treatment and environmental remediation.

Evaluation of an Ionic Porous Organic Polymer for Water Remediation

The targeted synthesis of a novel ionic porous organic polymer (iPOP) was reported. The compound (denoted as QUST-iPOP-1) was built up through a quaternization reaction of tris(4-imidazolylphenyl)amine and cyanuric chloride, and then benzyl bromide was added to complete the quaternization of the total imidazolyl units. It featured a special exchangeable Cl^-/Br^--rich structure with high permanent porosity and wide pore size distribution, enabling it to rapidly and effectively remove environmentally toxic oxo-anions including Cr₂O₇^2-, MnO₄^-, and ReO₄^- and anionic organic dyes with different sizes including methyl blue, Congo red, and methyl orange from water. Notably, QUST-iPOP-1 showed ultra-high capacity values for radioactive TcO₄^- surrogate anions (MnO₄^- and ReO₄^-), Cr₂O₇^2-, methyl blue, and Congo red, and these were comparable to some reported compounds of exhaustive research. Furthermore, the relative removal rate was high even when other concurrent anions existed.

Assessing ecological risk of organophosphate esters released from sediment with both of total content and desorbable content

This study introduced fractions (labile, stable-adsorbed, tight-adsorbed fractions) of organophosphate esters (OPEs) into ecological risk assessment to evaluate the potential risks of organophosphate esters that released from sediment, and conduct a case study to verify it. The content of desorbable fractions was get from adsorption-desorption experiments. Adsorption process can be divided into fast sorption, gradual sorption, and final equilibrium stage, and labile, stable-adsorbed, tight-adsorbed fractions were formed during adsorption. Approximately 86.21% labile, 73.41% stable-adsorbed, and 43.01% tight-adsorbed TPhP-D can be desorbed from sediments in desorption experiments. According to the results, the value of hazard quotient (HQ) that calculated by desorbable fractions reduced by 13.88% than HQ calculated by the sum of fractions, and result of 29.76% decrease for ∑HQs. The isotherm results demonstrated that the contents of labile and stable-adsorbed fractions increased faster than tight-adsorbed fraction when the concentration of contaminant in water increased from 50 to 400 μg/L, which means ecological risk in areas with high concentration of contaminants are higher than the discreet value. In case study, an additional hotspot was found in areas, where characterized with high proportion of labile fraction, when ecological risk was calculated by desorbable fractions. Indicating that revised ecological risk assessment takes both of total content and desorbable content into consideration.

3D Cationic Polymeric Network Nanotrap for Efficient Collection of Perrhenate Anion from Wastewater

Rhenium is one of the most valuable elements found in nature, and its capture and recycle are highly desirable for resource recovery. However, the effective and efficient collection of this material from industrial waste remains quite challenging. Herein, a tetraphenylmethane-based cationic polymeric network (CPN-tpm) nanotrap is designed, synthesized, and evaluated for ReO₄^- recovery. 3D building units are used to construct imidazolium salt-based polymers with positive charges, which yields a record maximum uptake capacity of 1133 mg g^-1 for ReO₄^- collection as well as fast kinetics ReO₄^- uptake. The sorption equilibrium is reached within 20 min and a k_d value of 8.5 × 10⁵ mL g^-1 is obtained. The sorption capacity of CPN-tpm remains stable over a wide range of pH values and the removal efficiency exceeds 60% for pH levels below 2. Moreover, CPN-tpm exhibits good recyclability for at least five cycles of the sorption-desorption process. This work provides a new route for constructing a kind of new high-performance polymeric material for rhenium recovery and rhenium-contained industrial wastewater treatment.

Radiation synthesis of ionic liquid-functionalized silica-based adsorbents: a preliminary investigation on its application for removal of ReO4- as an analog for TcO4. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021;28:17752-17762. [PMID: 33400123 DOI: 10.1007/s11356-020-12078-z]

The decontamination of radioactive TcO₄^- from nuclear wastes is becoming increasingly crucial for spent nuclear fuel reprocessing and environmental remediation. In this work, a series of ionic liquid-immobilized silica-based adsorbents (SVIL-Cn, n = 1, 4, 8) were newly synthesized using the radiation-induced grafting of 4-vinylbenzyl chloride onto silanized silica and subsequent functionalization with 1-methylimidazole, 1-butylimidazole, or 1-octylimidazole. The synthesis conditions such as the solvent, absorbed dose, and monomer concentration were investigated in detail, and the resulting adsorbents were characterized by elemental analysis, FT-IR, SEM, and TGA. In batch experiments, the adsorbents exhibited a high ReO₄^- (a nonradioactive surrogate of TcO₄^-) removal efficiency over a wide pH range (3 ~ 8), and SVIL-C1 showed a maximum adsorption capacity of 70.62 mg g^-1 towards ReO₄^-. In addition, their adsorption performance barely changed after 800 kGy radiation. The column experiments for treating simulated radioactive wastewater showed that the SVIL-Cn adsorbents could selectively separate TcO₄^-/ReO₄^- from a variety of fission products, and they could be recycled four times with negligible capacity loss. Lastly, XPS and FT-IR analysis confirmed that the adsorption proceeded via an ion-exchange mechanism. The results showed that these adsorbents are suitable for the efficient removal of TcO₄^-/ReO₄^- from radioactive wastewater with complex compositions.

Radiation synthesis of imidazolium-based ionic liquid modified silica adsorbents for ReO4− adsorption

A series of ionic liquid functionalized silica-based adsorbents were synthesized and used to remove ReO₄⁻ from simulated radioactive wastewater.

Optimizing Strategy for Enhancing the Stability and 99TcO4 - Sequestration of Poly(ionic liquids)@MOFs Composites

Metal-organic frameworks (MOFs) are a class of promising sorbents for effective sequestration of radioactive ⁹⁹TcO₄ ^- anions. However, their poor stability and slow sorption kinetics in the industrial condition pose a great challenge. Herein, we demonstrate an optimizing strategy via in situ polymerization of ionic liquids (ILs) encapsulated in the pores of MOFs, forming polyILs@MOFs composites with greatly enhanced TcO₄ ^- sequestration compared with the pristine MOFs. Notably, the cross-linked polymerization of ILs facilitates the formation of both the inside ionic filler as the active sites and outside coating as the protective layers of MOFs, which is significantly beneficial to obtain the optimized sorption materials of exceptional stability under extreme conditions (e.g., in 6 M HNO₃). The final optimized composite shows fast sorption kinetics (<30 s), good regeneration (>30 cycles), and superior uptake performance for TcO₄ ^- in highly acidic conditions and simulated recycle stream. This strategy opens up a new opportunity to construct the highly stable MOF-based composites and extend their applicability in different fields.

Anion-exchanged and quaternary ammonium functionalized MIL-101-Cr metal-organic framework (MOF) for ReO4-/TcO4- sequestration from groundwater

There are few effective technologies for the sequestration of highly water-soluble pertechnetate (TcO₄^-) from contaminated water despite the urgency of environmental and public health concerns. In this work, anion exchanged and cetyltrimethylammonium bromide (CTAB) functionalized MIL-101-Cr-NO₃ were investigated for perrhenate (ReO₄^-), a surrogate of TcO₄^-, sequestration from artificial groundwater. Cl^-, I^-, and CF₃SO₃^- exchanged MIL-101-Cr proved more effective at ReO₄^- removal than the parent MIL-101-Cr-F. Compared to the parent framework, CTAB functionalized MIL-101-Cr-NO₃ increased ReO₄^- removal capacity from 39 to 139 mg/g, improved the reaction kinetics from ~30 to <10 min to reach full adsorption capacity and the selectivity for ReO₄^- over competing NO₃^-, CO₃^2-, SO₄^2-, and Cl^-. Spectroscopic data indicated that the chemical speciation of Re in the exchanged MIL-101-Cr remained ReO₄^-, indicating synergistic sequestration through both anion exchange and non-ion exchange binding with the positively charged ligand of CTAB. These studies foreshadow potential applications of MOFs for the remediation of ⁹⁹TcO₄^- from contaminated environments.

A Highly Efficient Coordination Polymer for Selective Trapping and Sensing of Perrhenate/Pertechnetate

A porous cationic Ag(I) coordination polymer, [Ag(1,2,4,5-p4b)](SbF₆) (TJNU-302) with the ligand 1,2,4,5-p4b (1,2,4,5-tetra(pyridin-4-yl)benzene), is reported that shows high sorption capacity (211 mg g^-1) and distribution coefficient K_d (5.8 × 10⁵ mL g^-1) as well as outstanding selectivity in 500 times excess of CO₃^2- or PO₄^3- anion for perrhenate removal. TJNU-302 can act as a crystalline turn-off sensor for perrhenate upon UV radiation. In this way, a test paper strip for sensing ReO₄^- could be produced. In water solution, TJNU-302 shows an efficient fluorescence quenching response to ReO₄^- ion, with the highest quenching percentage (86%) among all reported ReO₄^- sensors. These results could be elucidated by the bonding properties of single-crystal structures of TJNU-302 before and after perrhenate sorption, as well as density functional theory (DFT) calculations.