Heterostructures Based on g-C3N4/CuI as a Photoactivated Support for Pt Nanoparticles toward Efficient Photoelectrocatalytic Methanol Oxidation

Pt nanoclusters embedded Fe-based metal-organic framework as a dual-functional electrocatalyst for hydrogen evolution and alcohols oxidation

Design and construction of high-efficiency and durable dual-functional electrocatalyst for clean energy electrocatalytic reaction is urgently desirable for mitigating the energy shortage and environmental deterioration issues. Herein, we prepared Pt nanoclusters with exposed (111) face plane embedded Fe-based metal-organic frameworks (Fe-MOF, MIL-100(Fe)) catalyst for electrocatalytic hydrogen evolution reaction (HER) and ethylene glycol oxidation reaction (EGOR). It is noted that the available oxygen sites on the surface of MIL-100(Fe) would form Pt-O interaction with Pt nanoclusters to acquire strong interfacial interaction, which endows Pt/MIL-100(Fe) electrocatalyst effective electron transfer, increasing catalytic active sites, accelerating proton-electron coupling, and improving conductivity. Benefitting from the desirable metal-supports interaction and derive merits for catalysis, the high electrocatalytic activity and durability for HER and EGOR were achieved as expected. Impressively, superior HER performance with higher current density, lower overpotential (46/29 mV in acidic/alkaline electrolyte) and smaller Tafel slope (19.7/37.8 mV dec^-1 in acidic/alkaline electrolyte) were acquired compared to commercial Pt/C. Moreover, Pt/MIL-100(Fe) electrode exhibits a rather high mass activity of 11826 mA mg^-1_Pt and long-term stability for EGOR. The present investigation demonstrates the promise of active metal/MOF combination for the interfacial strategy and rational design of dual-functional electrocatalyst, which has potential applications for future electrocatalysis field.

Biomass porous carbon as the active site to enhance photodegradation of oxytetracycline on mesoporous g-C3N4

Graphitic carbon nitride (g-C3N4) is widely used in photocatalytic adsorption and degradation of pollutants, but there are still some problems such as low adsorption performance and high electron-hole recombination efficiency. Herein, we propose a new molten salt assisted thermal polycondensation strategy to synthesize biomass porous carbon (BPC) loaded on g-C3N4 composites (designated as BPC/g-C3N4) with a hollow tubular structure, which had a high surface area and low electron-hole recombination rate. The study shows that the morphology of g-C3N4 changes dramatically from massive to hollow tubular by molten salt assisted thermal polycondensation, which provides a base for the loading of BPC, to construct a highly effective composite photocatalyst. BPC loaded on g-C3N4 could be used as the active site to enhance Oxytetracycline (OTC) removal efficiency by adsorption and with higher electron-hole separation efficiency. As a result, the BPC(5%)/g-C3N4 sample presented the highest photocatalytic degradation efficiency (84%) for OTC degradation under visible light irradiation. The adsorption capacity and photocatalytic reaction rate were 3.67 and 5.63 times higher than that of the g-C3N4, respectively. This work provided a new insight for the design of novel composite photocatalysts with high adsorption and photocatalytic performance for the removal of antibiotic pollutants from wastewater.

Layer-by-Layer Assembly-Based Heterointerfaces for Modulating the Electronic Properties of Ti3C2Tx MXene

Two-dimensional (2D) transition-metal carbides (MXenes) are emerging as promising materials for a wide range of applications owing to their intriguing electrical, optical, and optoelectronic properties. However, the modulation of metallic Ti₃C₂T_x MXene electronic properties is the key challenge to fabricate functional nanoelectronic devices. Here, we demonstrate a solution-processable route to fabricate Ti₃C₂T_x MXene/CuI nanoparticle heterointerfaces by employing a layer-by-layer assembly process. The charge transfer at the heterointerfacial assembly is monitored qualitatively from the quenched photoluminescence emission of CuI. The stable electrical conductivity and consistent Raman spectra of the 3-LBL assembly (three sequential stacks of CuI/MXene) signify the oxidation stability of Ti₃C₂T_x thin films even after exposure to the ambient environment for 2 months. Furthermore, the 3-LBL assembly exhibited a three-dimensional (3D) variable-range hopping-based electrical conduction in the temperature range 2 ≤ T < 100 K, contrary to the weak localized transport phenomenon in Ti₃C₂T_x MXene. The difference in charge transport mechanism is supported by distinct magnetoresistance (MR) of the Ti₃C₂T_x MXene (negative MR, -0.4%) and 3-LBL assembly (positive MR, 1.6%). Therefore, the modulated electrical transport and superior oxidation stability of the Ti₃C₂T_x MXene in the 3-LBL assembly have the potential to develop next-generation optoelectronic and memory devices.

A Review of Electrical Assisted Photocatalytic Technologies for the Treatment of Multi-Phase Pollutants

This article reviews the fundamental theories and reaction mechanisms of photocatalytic technologies with the assistance of electrical field for degrading multi-phase pollutants. Photo(electro)catalysis including photocatalytic oxidation (PCO) and photoelectrocatalytic oxidation (PECO) have been a potential technologies applied for the treatment of organic and inorganic compounds in the wastewaters and waste gases, which has been treated as a promising technique by using semiconductors as photo(electro)catalysts to convert light or electrical energy to chemical energy. Combining photocatalytic processes with electrical field is an option to effectively decompose organic and inorganic pollutants. Although photocatalytic oxidation techniques have been used to decompose multi-phase pollutants, developing efficient advanced oxidation technologies (AOTs) by combining photocatalysis with electrical potential is urgently demanded in the future. This article reviews the most recent progress and the advances in the field of photocatalytic technologies combined with external electrical field, including the characterization of nano-sized photo(electro)catalysts, the degradation of multi-phase pollutants, and the development of electrical assisted photocatalytic technologies for the potential application on the treatment of organic and inorganic compounds in the wastewaters and waste gases. Innovative oxidation techniques regarding photo(electro)catalytic reactions with and without oxidants are included in this review article.