Time-Saving and Cheap Strategy To Prepare Large Mesoporous Materials for Efficient CO2 Adsorption

Rational Design of Carbon-Based Porous Aerogels with Nitrogen Defects and Dedicated Interfacial Structures toward Highly Efficient CO2 Greenhouse Gas Capture and Separation

CO₂ capture from flowing flue gases through adsorption technology is essential to reduce the emission of CO₂ to the atmosphere. The rational design of highly efficient carbon-based absorbents with interfacial structures containing interconnected porous structures and abundant adsorption sites might be one of the promising strategies. Here, we report the synthesis of nitrogen-doped carbon aerogels (NCAs) via prepolymerized phenol-melamine-formaldehyde organic aerogels (PMF) by controlling the addition amount of ZnCl₂ and the precursor M/P ratio. It has been revealed that NCAs with a higher specific surface area and interconnected porous structures contain a large amount of pyridinic nitrogen and pyrrolic nitrogen. These would act as the intrinsic adsorption sites for highly effective CO₂ capture and further improve the CO₂/N₂ separation efficiencies. Among the prepared samples, NCA-1-2 with a high micropore surface area and high nitrogen content exhibits a high CO₂ adsorption capacity (4.30 mmol g^-1 at 0 °C and 1 bar) and CO₂/N₂ selectivity (36.5 at 25 °C, IAST). Under typical flue gas conditions (25 °C and 1.01 bar), equilibrium gas adsorption analysis and dynamic breakthrough measurement associated with a high adsorption capacity of 2.65 mmol g^-1 at 25 °C and 1.01 bar and 0.81 mmol g^-1 at 25 °C and 0.15 bar. This rationally designed N-doped carbon aerogel with specific interfacial structures and high CO₂ adsorption capacity, high selectivity, and adsorption performance remained pretty stable after multiple uses.

Simple carbonaceous-material-loaded mesoporous SiO2 composite catalyst for epoxide-CO2 cycloaddition reaction

In this paper, a novel arginine-glucose derived carbonaceous-material-loaded SiO₂ composite catalyst (Ar-G-CM/SiO₂) was synthesized from non-toxic and harmless reagents (arginine, glucose and tetraethylorthosilicate) by simple hydrothermal process. Mesoporous SiO₂ with high specific area served as support for carbonaceous material and provided extra hydrogen bond donor (HBD) groups. Ar-G-CM/SiO₂ with acid-base dual functional groups (COOH, NH₂) and HBD group (OH) presented 62% yield and 99% selectivity to product of propylene carbonate in CO₂ cycloaddition reaction with propylene oxide even at 40 °C, 2 MPa under metal-absent and solvent-free conditions. For some less active epoxides with steric hindrance, Ar-G-CM/SiO₂ also showed good yield and selectivity over 90% by raising temperature to 120 °C. Furthermore, the Ar-G-CM/SiO₂ catalyst could be reused for six successive cycles without significant decrease in catalytic activity or structural deterioration, because the carbon deposition was restrained owing to the mesoporous structure of the catalyst.