Recent Advances in Two-Dimensional MoS2 Nanosheets for Environmental Application

MoS2-based nanocomposites and aerogels for antibiotic pollutants removal from wastewater by photocatalytic degradation process: A review

Photocatalytic technologies based on molybdenum disulfide (MoS2) catalysts are effective, eco-friendly, and promising for antibiotic pollutants treatment. The technologies used by MoS2-based nanocomposites and aerogels for efficient degradation of antibiotics are reviewed in detail for the first time in this paper. The fundamental aspects of MoS2 were comprehensively scrutinized, encompassing crystal structure, optical properties, and photocatalytic principle. Then, the main synthesized methods and advantages/disadvantages for the preparation of MoS2-based nanocomposites and aerogels were systematically presented. Besides, a comprehensive overview of diverse MoS2-based nanocomposites and aerogels photo-degradation systems that enhanced the degradation of antibiotic pollutants were revealed. Meanwhile, the photo-degradation mechanism concentrated on the photoelectron transfer pathways and reactive oxygen species (ROS) were systematically evaluated. Finally, the challenges and perspectives for deeply development of MoS2-based nanocomposites and aerogels were discussed. This review may help researchers to deeply understand the research status of MoS2-based nanocomposites and aerogels for antibiotics removal, and makes clear the photo-degradation mechanism from photoelectron transfer pathways and ROS aspects of MoS2-based nanocomposites and aerogels.

MXene/AgNW composite material for selective and efficient removal of radioactive cesium and iodine from water

Toxic fission products, such as cesium (137Cs) and iodine (129I) are of great concern because of their long half-lives and high solubility in water. The simultaneous removal of Cs and I using a single adsorbent is an area of increasing interest. In this study, MXene/silver nanowire (AgNW) composite was synthesized through physical mixing and employed for simultaneous removal of iodide (I-) and cesium (Cs+) ions from contaminated water. The MXene/AgNW composite demonstrated excellent adsorption capacities of 84.70 and 26.22 mg/g for I- and Cs+, respectively. The experimental data supported the hypothesis of multilayer adsorption of Cs+ owing to the inter-lamellar structures and the presence of heterogeneous adsorption sites in MXene. The interaction between I- and the AgNW involved chemisorption followed by monolayer adsorption. MXene/AgNW composite material exhibited promising results in the presence of competitive ions under extreme pH conditions. Thus, synthesized composite materials holds promising potential as an adsorbent for the remediation of radioactive liquid waste.

3D Porous MoS2-Decorated Reduced Graphene Oxide Aerogel as a Heterogeneous Catalyst for Reductive Transformation Reactions

The MoS2-based reduced graphene oxide aerogel (MoS2-rGOA)-assisted organic transformation reactions are presented. MoS2-rGOA is used as a heterogeneous catalyst for the reduction of benzene derivatives such as benzaldehyde, nitrobenzene, and benzonitrile to benzyl alcohol, aniline, and benzamide and their derivatives, respectively, in green solvents (water/methanol) and green reducing agents (hydrazine hydrate having N2 and H2 as byproducts). The mechanistic features of the reduction pathway, substrate scope, and the best suitable conditions by varying the temperature, solvent, reducing agent, catalyst loading, time, etc. are optimized. All of the synthesized products are obtained in quantitative yield with purity and well characterized based on nuclear magnetic resonance analysis. Further, it is also observed that our catalyst is efficiently recyclable and works well checked up to 5 cycles.

Efficient and selective removal of Hg(II) from water using recyclable hierarchical MoS2/Fe3O4 nanocomposites

Developing practical and cost-effective adsorbents with satisfactory mercury (Hg) remediation capability is indispensable for aquatic environment safety and public health. Herein, a recyclable hierarchical MoS₂/Fe₃O₄ nanocomposite (by in-situ growth of MoS₂ nanosheets on the surface of Fe₃O₄ nanospheres) is presented for the selective removal of Hg(II) from aquatic samples. It exhibited high adsorption capacity (∼1923.5 mg g ^-1), fast kinetics (k₂ ∼ 0.56 mg g ^-1 min^-1), broad working pH range (2-11), excellent selectivity (K_d > 1.0 × 10⁷ mL g ^-1), and great reusability (removal efficiency > 90% after 20 cycles). In particular, removal efficiencies of up to ∼97% for different Hg(II) concentrations (10-1000 μg L ^-1) in natural water and industrial effluents confirmed the practicability of MoS₂/Fe₃O₄. The possible mechanism for effective Hg(II) removal was discussed by a series of characterization analyses, which was attributed to the alteration of the MoS₂ structure and the surface coordination of Hg-S. The accessibility of surface sulfur sites and the diffusion of Hg(II) in the solid-liquid system were enhanced due to the advantage of the expanded interlayer spacing (0.96 nm) and the hierarchical structure. This study suggests that MoS₂/Fe₃O₄ is a promising material for Hg(II) removal in actual scenarios and provides a feasible approach by rationally constructing hierarchical structures to promote the practical applications of MoS₂ in sustainable water treatments.

Capacitive deionization of high concentrations of hexavalent chromium using nickel-ferric-layered double hydroxide/molybdenum disulfide asymmetric electrode

To decontaminate wastewater affected by high concentrations of aqueous hexavalent chromium (Cr(VI)) and improve the capability of layered double hydroxide (LDH) as an electrode in the capacitive deionization (CDI) process, nickel-ferric-LDH (NiFe-LDH) and NiFe-LDH/molybdenum disulfide (NiFe/MoS₂) were synthesized using a hydrothermal method. Characterization results indicated that the flower-like cluster framework of MoS₂ was decorated with the NiFe-LDH. Addition of MoS₂ improved the conductivity, capacitance reversibility, charge efficiency, coulombic efficiency, and stability of NiFe/MoS₂. The CDI performance of aqueous Cr(VI) was evaluated using NiFe/MoS₂ and activated carbon as the anode and cathode, respectively. The process reached equilibrium within 240 min. The deionization capacity and removal ratio for Cr(VI) (100 mg/L, 100 mL) were 49.71 mg/g and 99.42 %, respectively, at 1.2 V and 20 mL/min. The isothermal data were accurately described using the Langmuir model, and the theoretical maximum deionization capacity of NiFe/MoS₂ for Cr(VI) was 106.2 mg/g. The interaction mechanisms included electrostatic attraction, surface complexation, and reduction. These findings indicate that NiFe/MoS₂ has feasible applications in practical wastewater treatment for Cr(VI) removal.

Novel Impregnation-Deposition Method to Synthesize a Presulfided MoS2/Al2O3 Catalyst and Its Application in Hydrodesulfurization

A novel impregnation-deposition method was applied to prepare presulfided MoS₂/Al₂O₃ catalysts with large surface areas for the application of hydrodesulfurization (HDS). The synthesized catalysts were characterized systematically, and their catalytic performances were evaluated by the HDS of dibenzothiophene (DBT). It is found that the impregnation-deposition method improves the surface area of the synthesized catalysts by eliminating the micropores of the alumina support and adding mesostructured MoS₂ particles within the support. Moreover, this method enhances the reducibility of the sulfided Mo species, as characterized by temperature-programed reduction (TPR) and X-ray photoelectron spectroscopy. Compared to the impregnation method, the impregnation-deposition method leads to the formation of more active sites as proved by TPR and CO-Fourier-transform infrared analyses. Hence, the reaction conversion rates and the hydrogenation/direct-desulfurization ratios of the DBT on the catalysts synthesized by the impregnation-deposition method are 1.3 times and 1.5 times as high as those of the catalysts made by the conventional impregnation method, respectively.

Amphiphilic ligand in situ assembly of uranyl active sites and selective interactions of molybdenum disulfide

Removal of radioactive uranyl ions (UO₂²⁺) from water by effective adsorbents is highly desired but remains a challenge. UO₂²⁺ are easily combined with H₂O, and the polarization of H₂O affects the complexation between UO₂²⁺ and the adsorbent. Thus, it is necessary to reconstruct the UO₂²⁺ active site to improve the adsorption capacity. Herein ，an amphiphilic ligand, namely N, N-dimethyl-9-decenamide (NND), is successfully prepared. NND replace H₂O in [UO₂(H₂O)₅]²⁺ by hydrogen bonding, thereby enhancing the adsorption capacity of MoS₂ particles in the reconstituted UO₂²⁺ active sites. The predicted maximum adsorption capacity increased from 50.7 to 500.7 mg g^- 1 (by a factor of 9.87) with the presence of NND, which is higher than other functional group-modified MoS₂ adsorbents. Furthermore, NND and MoS₂ can retain UO₂²⁺ uptake under extreme conditions including high acid-base and gamma irradiation. Theoretical Calculations of NND through H bonding produces an increased amount of charge transfer and a reduced adsorption energy between UO₂²⁺ and MoS₂, which weakens the polarization effect of H₂O. The findings showed that NND appeared to be a promising amphiphilic to improve the adsorption efficiency of UO₂²⁺ from water.

Insights into glyphosate removal efficiency using a new 2D nanomaterial

Glyphosate (GLY) is a nonselective herbicide that has been widely used in agriculture for weed control. However, there are potential genetic, development and reproduction risks to humans and animals associated with exposure to GLY. Therefore, the removal of this type of environmental pollutants has become a significant challenge. Some of the two-dimensional nanomaterials, due to the characteristics of hydrophilic nature, abundant highly active surficial sites and, large specific surface area are showed high removal efficiency for a wide range of pollutants. The present study focused on the adsorption behavior of GLY on silicene nanosheets (SNS). In order to provide more detailed information about the adsorption mechanism of contaminants on the adsorbent's surface, molecular dynamics (MD) and well-tempered metadynamics simulations are performed. The MD results are demonstrated that the contribution of the L-J term in pollutant/adsorbent interactions is more than coulombic energy. Furthermore, the simulation results demonstrated the lowest total energy value for system-A (with the lowest pollutant concentration), while system-D (contains the highest concentration of GLY) had the most total energy (E _tot: -78.96 vs. -448.51 kJ mol^-1). The well-tempered metadynamics simulation is accomplished to find the free energy surface of the investigated systems. The free energy calculation for the SNS/GLY system indicates a stable point in which the distance of GLY from the SNS surface is 1.165 nm.

Hydrothermal Synthesis of 1T-MoS2/Pelagic Clay Composite and Its Application in the Catalytic Reduction of 4-Nitrophenol

Pelagic clay is an emerging marine resource with strong hydrophilicity, fine particles and a large specific surface area. In this work, a 1T-MoS2/pelagic clay composite was fabricated by hydrothermal synthesis. In the composite, 1T-MoS2 nanosheets are evenly dispersed on the surface of the clay minerals, significantly reducing the agglomeration of MoS2. Compared with pure 1T-MoS2, the 1T-MoS2 nanosheets generated on the surface of pelagic clay have significantly smaller lateral dimensions and thicknesses. Moreover, the specific surface area is much larger than that of the pure 1T-MoS2 nanosheets fabricated by the same method, indicating that the active sites of the MoS2 sheets are fully exposed. In addition, the composite exhibited excellent hydrophilicity, leading to a high dispersibility in aqueous solutions. In this work, the composite was used as a catalyst in the reduction of 4-nitrophenol (4-NP), and the conversion of 4-NP reached up to 96.7%. This result shows that the 1T-MoS2/pelagic clay composite is a promising catalyst in a variety of reactions.

Theoretical and experimental studies on uranium(vi) adsorption using phosphine oxide-coated magnetic nanoadsorbent

In this study, novel Cyanex-923-coated magnetite nanoparticles (Fe₃O₄@Cyanex-923) were prepared, comprehensively characterized, and employed for uranium(vi) ion adsorption from aqueous solutions. FTIR and TGA data confirmed that Fe₃O₄ has successfully gained Cyanex-923 surface functionality. Particle size and morphological studies via DLS, HR-TEM, and SEM showed uniform-dispersed quasi-spherical nanoparticles with a mean diameter of ca. 44 nm. Magnetism measurement data revealed the superparamagnetic properties of the Fe₃O₄@Cyanex-923 nanoadsorbent. The effect of different experimental settings on the adsorption efficiency was studied to determine the best operational conditions. The experimental results were analyzed using Langmuir, Freundlich, and Temkin isotherms; where the adsorption data obeyed the Langmuir model showing a theoretical adsorption capacity of 429.185 mg g⁻¹ at 298 K. Kinetics data analysis revealed a fast adsorption process that could reach equilibrium within 60 min and is well-fitted to the pseudo-2nd-order model. Temperature affected the adsorption process and the thermodynamic data indicated that uranium(vi) adsorption was spontaneous and exothermic. Fe₃O₄@Cyanex-923 nanoparticles displayed a good regeneration behavior over three sequential adsorption–desorption cycles. The Fe₃O₄@Cyanex-923 nanoadsorbent showed a high uranium adsorption capacity, fast equilibration time, economic nature, good reusability, and easy separation; making it a promising candidate for uranium(vi) removal from nuclear waste streams.

A Fe₃O₄@Cyanex-923 nanoadsorbent was prepared and applied as an efficient candidate for uranium(vi) removal from aqueous solutions.