Wearable Tissue Adhesive Ternary Hydrogel of N-(2-Hydroxyl) Propyl-3-trimethyl Ammonium Chitosan, Tannic Acid, and Polyacrylamide

A chitosan-based conductive double network hydrogel doped by tannic acid-reduced graphene oxide with excellent stretchability and high sensitivity for wearable strain sensors

Conductive hydrogels usually suffer from weak mechanical properties and are easily destroyed, resulting in limited applications in flexible electronics. Concurrently, adding conductive additives to the hydrogel solution increases the probability of agglomeration and uneven dispersion issues. In this study, the biocompatible natural polymer chitosan was used as the network substrate. The rigid network employed was the Cit3-ion crosslinked chitosan (CS) network, and the MBA chemically crosslinked polyacrylamide (PAM) network was used as the flexible network. Tannic acid-reduced graphene oxide (TA-rGO), which has excellent conductivity and dispersibility, is used as a conductive filler. Thus, a CS/TA-rGO/PAM double network conductive hydrogel with excellent performance, high toughness, high conductivity, and superior sensing sensitivity was prepared. The prepared CS/TA-rGO/PAM double network conductive hydrogels have strong tensile properties (strain and toughness as high as 2009 % and 1045 kJ/cm3), excellent sensing sensitivity (GF value was 4.01), a wider strain detection range, high cycling stability and durability, good biocompatibility, and antimicrobial properties. The hydrogel can be assembled into flexible wearable devices that can not only dynamically detect human movements, such as joint bending, facial expression changes, swallowing, and saying, but also recognize handwriting and enable human-computer interaction.

Degradable Supramolecular Eutectogel-Based Ionic Skin with Antibacterial, Adhesive, and Self-Healable Capabilities

The development of degradable, cost-effective, and eco-friendly ionic conductive gels is highly required to reduce electronic waste originating from flexible electronic devices. However, biocompatible, degradable, tough, and durable conductive gels are challenging to achieve. Herein, we develop a facile strategy for the design and synthesis of degradable tough eutectogels by integrating an electrostatically driven supramolecular network composed of branched polyacrylic acid (PAA) and monoethanolamine (MEA) into a green deep eutectic solvent with chitosan quaternary ammonium salt (CQS). The specially designed PAA/MEA/CQS eutectogels present multiple desired properties, including high transparency, widely adjustable mechanical properties, high resilience, reliable adhesiveness, excellent self-healing ability, good conductivity, remarkable anti-freezing performance, and antibacterial properties. The dynamic and reversible supramolecular interactions not only significantly enhance the mechanical properties of the PAA/MEA/CQS eutectogels but also enable fast degradation, addressing the dilemma between mechanical strength and degradability. More importantly, a biocompatible and degradable multifunctional ionic skin is successfully fabricated based on the PAA/MEA/CQS eutectogel, exhibiting high sensitivity, a wide sensing range, and a rapid response speed toward strain, pressure, and temperature. Thus, this study offers a promising strategy for fabricating degradable tough eutectogels, which show great potential as high-performance ionic skins for next-generation flexible wearable electronic devices.

Preparation and Functionalization of Polymers with Antibacterial Properties-Review of the Recent Developments

The presence of antibiotic-resistant bacteria in our environment is a matter of growing concern. Consumption of contaminated drinking water or contaminated fruit or vegetables can provoke ailments and even diseases, mainly in the digestive system. In this work, we present the latest data on the ability to remove bacteria from potable water and wastewater. The article discusses the mechanisms of the antibacterial activity of polymers, consisting of the electrostatic interaction between bacterial cells and the surface of natural and synthetic polymers functionalized with metal cations (polydopamine modified with silver nanoparticles, starch modified with quaternary ammonium or halogenated benzene). The synergistic effect of polymers (N-alkylaminated chitosan, silver doped polyoxometalate, modified poly(aspartic acid)) with antibiotics has also been described, allowing for precise targeting of drugs to infected cells as a preventive measure against the excessive spread of antibiotics, leading to drug resistance among bacteria. Cationic polymers, polymers obtained from essential oils (EOs), or natural polymers modified with organic acids are promising materials in the removal of harmful bacteria. Antimicrobial polymers are successfully used as biocides due to their acceptable toxicity, low production costs, chemical stability, and high adsorption capacity thanks to multi-point attachment to microorganisms. New achievements in the field of polymer surface modification in order to impart antimicrobial properties were summarized.

Two-Layered Biomimetic Flexible Self-Powered Electrical Stimulator for Promoting Wound Healing

The repair of wound damage has been a common problem in clinic for a long time. Inspired by the electroactive nature of tissues and the electrical stimulation of wounds in clinical practice, the next generation of wound therapy with self-powered electrical stimulator is expected to achieve the desired therapeutic effect. In this work, a two-layered self-powered electrical-stimulator-based wound dressing (SEWD) was designed through the on-demand integration of the bionic tree-like piezoelectric nanofiber and the adhesive hydrogel with biomimetic electrical activity. SEWD has good mechanical properties, adhesion properties, self-powered properties, high sensitivity, and biocompatibility. The interface between the two layers was well integrated and relatively independent. Herein, the piezoelectric nanofibers were prepared by P(VDF-TrFE) electrospinning, and the morphology of the nanofibers was controlled by adjusting the electrical conductivity of the electrospinning solution. Benefiting from its bionic dendritic structure, the prepared piezoelectric nanofibers had better mechanical properties and piezoelectric sensitivity than native P(VDF-TrFE) nanofibers, which can convert tiny forces into electrical signals as a power source for tissue repair. At the same time, the designed conductive adhesive hydrogel was inspired by the adhesive properties of natural mussels and the redox electron pairs formed by catechol and metal ions. It has bionic electrical activity matching with the tissue and can conduct the electrical signal generated by the piezoelectric effect to the wound site so as to facilitate the electrical stimulation treatment of tissue repair. In addition, in vitro and in vivo experiments demonstrated that SEWD converts mechanical energy into electricity to stimulate cell proliferation and wound healing. The proposed healing strategy for the effective treatment of skin injury was provided by developing self-powered wound dressing, which is of great significance to the rapid, safe, and effective promotion of wound healing.