High-Throughput Production of Droplets Using Mini Hydrodynamic Focusing Devices with Recirculation

Flow Physics of Planar Bistable Fluidic Oscillator with Backflow Limbs

Fluidic oscillators (FOs) are used in a variety of applications, including process control and process intensification. Despite the simple design and operation of FOs, the fluid dynamics of FOs exhibit rich complexities. The inherently unstable flow, jet oscillations, and resulting vortices influence mixing and other transport processes. In this work, we computationally investigated the fluid dynamics of a new design of a planar FO with backflow limbs. The design comprised of two symmetric backflow limbs leading to bistable flow. The unsteady flow dynamics, internal recirculation, jet oscillations, secondary flow vortices were computationally studied over a range of inlet Reynolds numbers (2400-12,000). The nature and frequency of the jet oscillations were quantified. The computed jet oscillation frequency was compared with the experimentally measured (using imaging techniques) jet oscillation frequency. The flow model was then used to quantitatively understand mixing, heat transfer, and residence time distribution. The approach and the results presented in this work will provide a basis for designing FO's with desired flow and transport characteristics for various engineering applications.

High-throughput countercurrent microextraction in passive mode

Although microextraction is much more efficient than conventional macroextraction, its practical application has been limited by low throughputs and difficulties in constructing robust countercurrent microextraction (CCME) systems. In this work, a robust CCME process was established based on a novel passive microextractor with four units without any moving parts. The passive microextractor has internal recirculation and can efficiently mix two immiscible liquids. The hydraulic characteristics as well as the extraction and back-extraction performance of the passive CCME were investigated experimentally. The recovery efficiencies of the passive CCME were 1.43-1.68 times larger than the best values achieved using cocurrent extraction. Furthermore, the total throughput of the passive CCME developed in this work was about one to three orders of magnitude higher than that of other passive CCME systems reported in the literature. Therefore, a robust CCME process with high throughputs has been successfully constructed, which may promote the application of passive CCME in a wide variety of fields.