Synergy Effects of the Mixture of Bismuth Molybdate Catalysts with SnO2/ZrO2/MgO in Selective Propene Oxidation and the Connection between Conductivity and Catalytic Activity

Microemulsion-mediated preparation of Ce2(MoO4)3 nanoparticles for photocatalytic degradation of crystal violet in aqueous solution

Preparation of Ce₂(MoO₄)₃ nanoparticles is reported via the microemulsion method by using two different surfactants, i.e., cationic surfactant, cetyltrimethylammonium bromide (CTAB), and nonionic surfactant, Triton X-100. The water pools produced in the microemulsion systems behave as nanoreactors for reaction of the cerium (3+) and molybdate ions to produce Ce₂(MoO₄)₃ nanoparticles. The structure and morphology of the products were characterized by using Fourier-transform infrared (FT-IR) spectroscopy, energy-dispersive X-ray analysis (EDX), UV-Vis spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The prepared Ce₂(MoO₄)₃ nanoparticles were successfully utilized as photocatalysts to remove crystal violet from aqueous solution in which the maximum percentage of dye degradation was about 89% after 5 h under the visible light irradiation. Also, kinetic study of the photocatalytic degradation revealed that pseudo-second order model is the best one for describing kinetic of the reaction.

Synthesis of Co0.5 Mn0.1 Ni0.4 C2 O4 ⋅n H2 O Micropolyhedrons: Multimetal Synergy for High-Performance Glucose Oxidation Catalysis

Owing to the synergy between metals, trimetal oxalate micropolyhedrons have been synthesized by means of a room-temperature coprecipitation strategy. The effect of their nanoscale size on their electrochemical performance toward glucose oxidation was investigated. In particular, the Co_0.5 Mn_0.1 Ni_0.4 C₂ O₄ ⋅n H₂ O micropolyhedrons illustrated prominent electrocatalytic activity for the glucose oxidation reaction. Additionally, the Co_0.5 Mn_0.1 Ni_0.4 C₂ O₄ ⋅n H₂ O micropolyhedrons, when used as an electrode material, illustrated an excellent lower limit of detection (1.5 μm), a wide detection concentration range (0.5-5065.5 μm), and a high sensitivity (493.5 μA mm^-1  cm^-2 ). Further analysis indicated that the effectively improved conductivity may have been due to the small size of the materials, and it was easier to form a flat film when Nafion was coated onto the glassy carbon electrode.

Interface Engineering of Graphene-Supported Cu Nanoparticles Encapsulated by Mesoporous Silica for Size-Dependent Catalytic Oxidative Coupling of Aromatic Amines

In this study, graphene nanosheet-supported ultrafine Cu nanoparticles (NPs) encapsulated with thin mesoporous silica (Cu-GO@m-SiO₂) materials are fabricated with particle sizes ranging from 60 to 7.8 nm and are systematically investigated for the oxidative coupling of amines to produce biologically and pharmaceutically important imine derivatives. Catalytic activity remarkably increased from 76.5% conversion of benzyl amine for 60 nm NPs to 99.3% conversion and exclusive selectivity of N-benzylidene-1-phenylmethanamine for 7.8 nm NPs. The superior catalytic performance along with the outstanding catalyst stability of newly designed catalysts are attributed to the easy diffusion of organic molecules through the porous channel of mesoporous SiO₂ layers, which not only restricts the restacking of the graphene nanosheets but also prevents the sintering and leaching of metal NPs to an extreme extent through the nanoconfinement effect. Density functional theory calculations were performed to shed light on the reaction mechanism and to give insight into the trend of catalytic activity observed. The computed activation barriers of all elementary steps are very high on terrace Cu(111) sites, which dominate the large-sized Cu NPs, but are significantly lower on step sites, which are presented in higher density on smaller-sized Cu NPs and could explain the higher activity of smaller Cu-GO@m-SiO₂ samples. In particular, the activation barrier for the elementary coupling reaction is reduced from 139 kJ/mol on flat terrace Cu(111) sites to the feasible value of 94 kJ/mol at step sites, demonstrating the crucial role of the step site in facilitating the formation of secondary imine products.

Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions

Nanomaterials are at the leading edge of the emerging field of nanotechnology. Their unique and tunable size-dependent properties (in the range 1-100 nm) make these materials indispensable in many modern technological applications. In this Review, we summarize the state-of-art in the manufacture and applications of inorganic nanoparticles made using continuous hydrothermal flow synthesis (CHFS) processes. First, we introduce ideal requirements of any flow process for nanoceramics production, outline different approaches to CHFS, and introduce the pertinent properties of supercritical water and issues around mixing in flow, to generate nanoparticles. This Review then gives comprehensive coverage of the current application space for CHFS-made nanomaterials including optical, healthcare, electronics (including sensors, information, and communication technologies), catalysis, devices (including energy harvesting/conversion/fuels), and energy storage applications. Thereafter, topics of precursor chemistry and products, as well as materials or structures, are discussed (surface-functionalized hybrids, nanocomposites, nanograined coatings and monoliths, and metal-organic frameworks). Later, this Review focuses on some of the key apparatus innovations in the field, such as in situ flow/rapid heating systems (to investigate kinetics and mechanisms), approaches to high throughput flow syntheses (for nanomaterials discovery), as well as recent developments in scale-up of hydrothermal flow processes. Finally, this Review covers environmental considerations, future directions and capabilities, along with the conclusions and outlook.

Solvent-free oxidation of cyclohexane by oxygen over Al–Cu–Co alloys: influence of the phase structure and electrical conductivity on catalytic activity

Cu dissolved in the Al₁₃Co₄ phase promotes the electrical conductivity and catalytic activity of Al–Cu–Co alloys.

Integrated Experimental and Theoretical Study of Shape-Controlled Catalytic Oxidative Coupling of Aromatic Amines over CuO Nanostructures

We have synthesized CuO nanostructures with flake, dandelion-microsphere, and short-ribbon shapes using solution-phase methods and have evaluated their structure-performance relationship in the heterogeneous catalysis of liquid-phase oxidative coupling reactions. The formation of nanostructures and the morphological evolution were confirmed by transmission electron microscopy, scanning electron microscopy, X-ray diffraction analysis, X-ray photoelectron spectroscopy, Raman spectroscopy, energy-dispersive X-ray spectroscopy, elemental mapping analysis, and Fourier transform infrared spectroscopy. CuO nanostructures with different morphologies were tested for the catalytic oxidative coupling of aromatic amines to imines under solvent-free conditions. We found that the flake-shaped CuO nanostructures exhibited superior catalytic efficiency compared to that of the dandelion- and short-ribbon-shaped CuO nanostructures. We also performed extensive density functional theory (DFT) calculations to gain atomic-level insight into the intriguing reactivity trends observed for the different CuO nanostructures. Our DFT calculations provided for the first time a detailed and comprehensive view of the oxidative coupling reaction of benzylamine over CuO, which yields N-benzylidene-1-phenylmethanamine as the major product. CuO(111) is identified as the reactive surface; the specific arrangement of coordinatively unsaturated Cu and O sites on the most stable CuO(111) surface allows N-H and C-H bond-activation reactions to proceed with low-energy barriers. The high catalytic activity of the flake-shaped CuO nanostructure can be attributed to the greatest exposure of the active CuO(111) facets. Our finding sheds light on the prospective utility of inexpensive CuO nanostructured catalysts with different morphologies in performing solvent-free oxidative coupling of aromatic amines to obtain biologically and pharmaceutically important imine derivatives with high selectivity.

Mechanistic insights into the catalytic elimination of tar and the promotional effect of boron on it: first-principles study using toluene as a model compound

The incorporation of a monolayer subsurface B into the Ni catalyst results in a corrugated Ni top surface and the activation of toluene is significantly promoted on B–Ni.