Wetting Properties of Seven Phosphonium Cation-Based Ionic Liquids

Enhancing CO2 separation from N2 mixtures using hydrophobic porous supports immobilized with tributyl-tetradecyl-phosphonium chloride [P44414][Cl]

The main obstacles in adopting solvent-based CO2 capture technology from power plant flue gases at the industrial scale are the energy requirements for solvent regeneration and their toxicity. These challenges can be overcome using new green and more stable ionic liquids (ILs) as solvents for post-combustion CO2 capture. In the current study, tributyl-tetradecyl-phosphonium chloride [P44414][Cl] as an IL, was immobilized on hydrophobic porous supports of polypropylene (PP), polyvinylidene fluoride (PVDF), and polytetrafluoroethylene (PTFE) at 298 ± 3 K and pressures up to 2 bar. The surface morphology indicated homogenous immobilization of the IL on the membrane support. Supported ionic liquid membranes (SILMs) were tested for CO2 permeability and CO2/N2 selectivity. None of the SILMs exhibited IL leaching up to 2 bar. The PTFE-based SILM performed better than other supports with minimum loss in water contact angle (WCA) and achieved good antiwetting with a maximum CO2 permeability and selectivity over N2 of 2300 ± 139 Barrer and 31.60 ± 2.4, respectively. This work achieves CO2 permeability about two-fold more than other works having CO2/N2 selectivity range of 25-35 in similar SILMs. The diffusivity of CO2 and N2 in [P44414][Cl] was measured as 3.64 ± 0.18 and 2.01 ± 0.09 [10-8 cm2 s-1] and CO2 and N2 solubility values were 9.79 ± 0.47 and 0.19 ± 0.001 [10-2 cm3(STP) cm-3 cmHg-1], respectively. The high values of Young's modulus and tensile strength of the PTFE support-based SILM (234 ± 12 MPa and 6.07 ± 0.31 MPa, respectively) indicated the long-term application of SILM in flue gas separation. The results indicated phosphonium chloride-based ILs could be better solvent candidates for CO2 removal from large volumes of flue gases than amine-based ILs.

Dynamic Wetting of Ionic Liquid Drops on Hydrophobic Microstructures

Ionic liquids (ILs)─salts in a liquid state─play a crucial role in various applications, such as green solvents for chemical synthesis and catalysis, lubricants, especially for micro- and nanoelectromechanical systems, and electrolytes in solar cells. These applications critically rely on unique or tunable bulk properties of ionic liquids, such as viscosity, density, and surface tension. Furthermore, their interactions with different solid surfaces of various roughness and structures may uphold other promising applications, such as combustion, cooling, and coating. However, only a few systematic studies of IL wetting and interactions with solid surfaces exist. Here, we experimentally and theoretically investigate the dynamic wetting and contact angles (CA) of water and three kinds of ionic liquid droplets on hydrophobic microstructures of surface roughness (r = 2.61) and packing fraction (ϕ = 0.47) formed by micropillars arranged in a periodic pattern. The results show that, except for water, higher-viscosity ionic liquids have greater advancing and receding contact angles with increasing contact line velocity. Water drops initially form a gas-trapping, CB wetting state, whereas all three ionic liquid drops are in a Wenzel wetting state, where liquids penetrate and completely wet the microstructures. We find that an existing model comparing the global surface energies between a CB and a Wenzel state agrees well with the observed wetting states. In addition, a molecular dynamic model well predicts the experimental data and is used to explain the observed dynamic wetting for the ILs and superhydrophobic substrate. Our results further show that energy dissipation occurs more significantly in the three-phase contact line region than in the liquid bulk.

Effect of Ion Pair on Contact Angle for Phosphonium Ionic Liquids

The wettability of ionic liquids (ILs) is relevant to their use in various applications. However, a mechanistic understanding of how the cation-anion pair affects wettability is still evolving. Here, focusing on phosphonium ILs, wettability was characterized in terms of contact angle using experiments and classical molecular dynamics simulations. Both experiments and simulations showed that the contact angle was affected by the anion and increased as benzoate < salicylate < saccharinate. Further, the simulations showed that the contact angle decreased with increasing cation alkyl chain length for these anions paired with five different tetra-alkyl-phosphonium cations. The trends were explained in terms of adhesive and cohesive energies in the simulations and then correlated to the atomic scale differences between the anions and the cations.

Bifunctional Double-Salt Ionic Liquids Containing both 4-Chloro-2-Methylphenoxyacetate and l-Tryptophanate Anions with Herbicidal and Antimicrobial Activity

The goal of this research was to obtain and characterize ionic liquids based on a bisammonium cation and both 4-chloro-2-methylphenoxyacetate (MCPA) and l-tryptophanate anions. The concept of including two structurally different anions was utilized to achieve improved biological activity, while crucial functional traits could be designed by modifying the cation. The synthesis process was efficient and resulted in high yields. Subsequent analyses (nuclear magnetic resonance (NMR), Fourier transform infrared (FT-IR) spectroscopy, and high-performance liquid chromatography (HPLC)) confirmed the chemical structure, purity, and molar ratio of ions in the obtained compounds. The described compounds are novel and have not been previously described in the literature. Evaluations of physicochemical properties indicated that the obtained double-salt ionic liquids (DSILs) exhibited high thermal stability, high solubility in water, and surface activity. A biological activity assessment using greenhouse tests revealed that the herbicidal efficiency of the studied DSILs was notably increased compared to the reference commercial herbicide (even by ∼50% in the case of oilseed rape), which could be attributed to their high wettability toward hydrophobic surfaces. The compounds also efficiently inhibited the growth of several microbial species, with minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC)/minimum fungicidal concentration (MFC) values at the level of several μg·mL-1. The length of the spacer and alkyl substituent in the cation notably influenced the physicochemical and biological properties of the DSILs, which allowed us to design the structures of the obtained compounds in accordance with needs. The presented results confirm the high application potential of the described DSILs and provide a new and promising path for obtaining new and efficient plant-protection agents.

Toxic effect of three imidazole ionic liquids on two terrestrial plants

To determine the toxic effect of three imidazole ionic liquids (IILs) in terrestrial monocotyledonous and dicotyledonous plants, three IILs (1-butyl-3-methylimidazole tetrafluoroborate, 1-butyl-3-methylimidazole hexafluorophosphate, and butyl-3-methylimidazolium bi-[(trifluoromethyl)sulfonyl]imide) were investigated using rice and capsicum as target toxicity models. In hydroponic experiments, increasing the concentration of the IILs led to a decrease in the seed germination rate, a decrease in the reduced stem and root lengths, and an increase in the inhibition rate of the stem and root lengths; in addition, as the concentration increased, the reducing sugar content of rice and capsicum seedling leaves and roots first increased and then decreased, while permeability of the cell membranes of the stems and roots of the two plants also gradually increased. In terms of the effects on these indices in rice, the ranking of these three IIL anions was [TF2N]- > [PF6]- > [BF4]-; in terms of the effects on capsicum, the sequence was [BF4]- > [TF2N]- > [PF6]-. These findings provide a theoretical reference for the next step in the synthesis and the use of green ionic liquids.

Meta-Analysis Comparing Wettability Parameters and the Effect of Wettability on Friction Coefficient in Lubrication

This work presents a meta-analysis that compares the suitability of various parameters used to characterize wettability in tribological systems. It also examines the relationship between wettability and the friction factor for multiple lubricant-surface pairings. The characterization of wetting behavior was similar when using the contact angle between a lubricant and surface and various dimensional and dimensionless formulations of a spreading parameter. It was possible to identify hydrodynamic, boundary, and mixed lubrication regimes by combining a dimensionless wettability parameter with the specific film thickness for a variety of neat ionic liquids and magnetorheological fluids in contact with metallic, thermoplastic, and elastic surfaces. This characterization was possible using multiple dimensionless wettability parameters, but those that can be fully determined using only the contact angle may be preferred by experimentalists. The use of dimensional and dimensionless wettability parameters that included polar and disperse components of surface tension and surface energy did not appear to provide additional insight into the wettability or frictional performance for the tribological system examined here.