Synergistic Effect of Mixed Oxide on the Adsorption of Ammonia with Metal–Organic Frameworks

Constructing Well-Defined and Robust Th-MOF-Supported Single-Site Copper for Production and Storage of Ammonia from Electroreduction of Nitrate

A combined technique of production and storage of ammonia (NH3) from electroreduction of nitrate (NO3 -) through one material is highly desirable but remains a huge challenge. Herein, we proposed a proof-of-concept strategy for combined NH3 production and storage from electroreduction of NO3 - through elaborately designing a single-site CuII-bipyridine-based thorium metal-organic framework (Cu@Th-BPYDC). Noticeably, the single CuII site, anchored by a solid-liquid postsynthetic metalation within Th-BPYDC, shows a novel square coordination structure, as determined by the single-crystal X-ray diffraction. This strongly implies its enormous potential as an open metal site and consequently enables excellent performance in electroreduction of NO3 - for NH3 production, giving 92.5% Faradaic efficiency and 225.3 μmol h-1 cm-2 yield. Impressively, we can further use Cu@Th-BPYDC material to effectively capture the previously produced NH3 from electroreduction of NO3 -, affording an uptake up to 20.55 mmol g-1 at 298 K at 1 bar. The results in this work will outline a new direction toward the combined technique for advanced electrocatalysis such as gas production plus storage/or separation.

A Novel Synthesis of 2-Arylbenzimidazole and 2-Arylbenzothiazole Derivatives by MnO2/MOF-199

The main objective of this research is to develop efficient and environmentally benign heterogeneous catalysts for synthesis of 2-arylbenzimidazole and 2-arylbenzothiazoles derivatives by MnO2/MOF-199. For this purpose, a heterogeneous MnO2/MOF-199 catalyst was prepared by the solvothermal method, and the prepared catalyst was characterised by various techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET, IR, thermogravimetric–differential thermogravimetric (TG-DTG), and temperature-programmed desorption with ammonia (NH3-TPD) analysis. The solid catalyst, with a MnO2/MOF-199 loading of 9%, demonstrated a high catalytic activity in the synthesis of 1,2-arylbenzimidazole and 1,2-arylbenzothiazole derivatives and the catalyst could be reused for at least 5 cycles under mild conditions.

Effect of Reduction Atmosphere on Structure and Catalytic Performance of PtIn/Mg(Al)O/ZnO for Propane Dehydrogenation

The effect of reduction atmospheres, H2/N2, C3H8/H2/N2, C3H8 and CO, on the structure and propane direct dehydrogenation performance of PtIn/Mg(Al)O/ZnO catalyst derived from ZnO-supported PtIn-hydrotalcite was studied. The physicochemical properties of the as-prepared and used catalytic system were characterized by various characterization methods. The results show that the dehydrogenation performance, especially the stability of the PtIn/Mg(Al)O/ZnO catalyst, was significantly improved along with the change in reduction atmosphere. The highest catalytic activity (51% of propane conversion and 97% propylene selectivity), resistance toward coke deposition, and stability for more than 30 h were achieved with the H2/N2-reduced catalyst. The optimal dehydrogenation performance and coke resistance are mainly related to the high Pt dispersion and In0/In3+ molar ratio, strong Pt–In interaction and small metal particle size, depending on the nature of the reduction atmospheres. The reconstruction of meixnerite favors the stability and coke resistance to some extent.

Novel Zeolite-5A@MOF-74 Composite Adsorbents with Core-Shell Structure for H2 Purification

Hydrogen is considered as one of the most important clean and renewable energy sources for a sustainable energy future. However, its efficient and cost-effective purification still remains challenging. In this work, we report the development of novel zeolite@metal-organic framework (MOF) composites comprised of MOF-74 and zeolite-5A with core-shell structure for efficient purification of H₂. The composites were synthesized hydrothermally through the addition of zeolite particles with and without carboxyl functional groups to the MOF synthesis solution. The zeolite/MOF weight ratio was varied systematically to find the optimum composition based on the adsorption performance. The formation of zeolite@MOF composites was confirmed by various characterization techniques. Single-component adsorption isotherms of CO₂, CO, CH₄, N₂, and H₂ over composites were measured at 25 °C to determine their equilibrium adsorption capacity. It was found that the zeolite-5A@MOF-74 with weight ratio of 5:95 exhibited a similar morphology to that of pristine MOF-74, but with higher surface area and total pore volume. Moreover, this composite showed 20-30% increase in CO₂, CO, CH₄, and N₂ uptake than the bare MOF, which could be attributed to the formation of new mesopores at the MOF-zeolite interface. The estimated selectivity values for CO₂/H₂, CO/H₂, CH₄/H₂, and N₂/H₂ were higher than those of the zeolite and/or MOF. Our results also indicated that surface modification of zeolite prior to composite formation does not enhance the adsorption capacities of the composites. Overall, the findings of this study suggest that the zeolite-5A@MOF-74 composites with core-shell structure are promising candidates for industrial H₂ purification processes.

Anchorage of Au3+ into Modified Isoreticular Metal-Organic Framework-3 as a Heterogeneous Catalyst for the Synthesis of Propargylamines

Postsynthetic modification of metal-organic framework is a general and practical approach to access MOF-based catalysts bearing multiple active sites. The isoreticular metal-organic framework-3 (IRMOF-3) was modified with lactic acid through condensation reaction of the carboxyl group of lactic acid and amino group present in IRMOF-3 frameworks. Au3+ was subsequently anchored onto the metal-organic framework IRMOF-3 using postsynthetic modification. The synthezized IRMOF-3-LA-Au (LA = lactic acid) was characterized by powder X-ray diffraction, N2 adsorption-desorption, infrared spectroscopy, liquid-state nuclear magnetic resonance, thermogravimetric analysis, H2-temperature programmed reduction, transmission electro microscopy, and inductively coupled plasma-optical emission spectrometry. IRMOF-3-LA-Au acted as an efficient heterogeneous catalyst in the synthesis of propargylamines by three-component coupling reaction of aldehyde, alkyne, and amine. Moreover, the catalyst is applicable to various substituted substrates, including aromatic and aliphatic aldehydes, alkyl- and aryl-substituted terminal alkynes, and alicyclic amines. In addition, the catalyst can be easily separated from the mixture and can be reused for four consecutive cycles.

Metal–organic frameworks for the removal of toxic industrial chemicals and chemical warfare agents

Toxic gases can be captured or degraded by metal–organic frameworks.