Dynamic Column Breakthrough and Process Studies of High-Purity Oxygen Production Using Silver-Exchanged Titanosilicates

Quantitative imaging of gas adsorption equilibrium and dynamics by X-ray computed tomography

We present the development and application of X-ray Computed Tomography (CT) for the determination of the adsorption properties of microporous adsorbents and the study of breakthrough experiments in a laboratory fixed-bed adsorption column. Using the model system $$\text {CO}_2/\text {helium}$$ CO 2 / helium on activated carbon, equilibrium and dynamic adsorption/desorption measurements by X-ray CT are described, and the results are successfully compared to those obtained from conventional methods, including the application of a one-dimensional dynamic column breakthrough model. The study demonstrates the practical feasibility of applying X-ray CT to measure internal and transient concentration profiles in adsorbent systems on the length-scales from a single adsorbent pellet to a packed column.

Application of Nanosize Zeolite Molecular Sieves for Medical Oxygen Concentration

The development of a portable oxygen concentrator is of prime significance for patients with respiratory problems. This paper presents a portable concentrator prototype design using the pressure/vacuum swing adsorption (PVSA) cycle with a deep evacuation step (-0.82 barg) instead of desorption with purge flow to simplify the oxygen production process. The output of the oxygen concentrator is a ~90 vol % enriched oxygen stream in a continuous adsorption and desorption cycle (cycle time ~90 s). The size of the adsorption column is 3 cm in diameter and 20 cm in length. A Li⁺ exchanged 13X nanosize zeolite is used as the adsorbent to selectively adsorb nitrogen from air. A dynamic model of the pressure and vacuum swing adsorption units was developed to study the pressurization and depressurization process inside the microporous area of nanosized zeolites. The describing equations were solved using COMSOL Multiphysics Chemical Engineering module. The output flow rate and oxygen concentration results from the simulation model were compared with the experimental data. Velocity and concentration profiles were obtained to study the adsorption process and optimize the operational parameters.