Attrition Study of Cement-Supported Biomass-Activated Calcium Sorbents for CO2 Capture

A Carbide Slag-Based, Ca12Al14O33-Stabilized Sorbent Prepared by the Hydrothermal Template Method Enabling Efficient CO2 Capture

Calcium looping is a promising technology to capture CO2 from the process of coal-fired power generation and gasification of coal/biomass for hydrogen production. The decay of CO2 capture activities of calcium-based sorbents is one of the main problems holding back the development of the technology. Taking carbide slag as a main raw material and Ca12Al14O33 as a support, highly active CO2 sorbents were prepared using the hydrothermal template method in this work. The effects of support ratio, cycle number, and reaction conditions were evaluated. The results show that Ca12Al14O33 generated effectively improves the cyclic stability of CO2 capture by synthetic sorbents. When the Al2O3 addition is 5%, or the Ca12Al14O33 content is 10%, the synthetic sorbent possesses the highest cyclic CO2 capture performance. Under harsh calcination conditions, the CO2 capture capacity of the synthetic sorbent after 30 cycles is 0.29 g/g, which is 80% higher than that of carbide slag. The superiority of the synthetic sorbent on the CO2 capture kinetics mainly reflects at the diffusion-controlled stage. The cumulative pore volume of the synthetic sorbent within the range of 10–100 nm is 2.4 times as high as that of calcined carbide slag. The structure of the synthetic sorbent reduces the CO2 diffusion resistance, and thus leads to better CO2 capture performance and reaction rate.

Investigation of Pore-Formers to Modify Extrusion-Spheronized CaO-Based Pellets for CO2 Capture

The application of circulating fluidized bed technology in calcium looping (CaL) requires that CaO-based sorbents should be manufactured in the form of spherical pellets. However, the pelletization of powdered sorbents is always hampered by the problem that the mechanical strength of sorbents is improved at the cost of loss in CO2 sorption performance. To promote both the CO2 sorption and anti-attrition performance, in this work, four kinds of pore-forming materials were screened and utilized to prepare sorbent pellets via the extrusion-spheronization process. In addition, impacts of the additional content of pore-forming material and their particle sizes were also investigated comprehensively. It was found that the addition of 5 wt.% polyethylene possesses the highest CO2 capture capacity (0.155 g-CO2/g-sorbent in the 25th cycle) and mechanical performance of 4.0 N after high-temperature calcination, which were about 14% higher and 25% improved, compared to pure calcium hydrate pellets. The smaller particle size of pore-forming material was observed to lead to a better performance in CO2 sorption, while for mechanical performance, there was an optimal size for the pore-former used.