Fabrication of Tunable, Stable, and Predictable Superhydrophobic Coatings on Foam Ceramic Materials

Review on the recent development of durable superhydrophobic materials for practical applications

Biomimetic superhydrophobic surfaces show great potential in oil-water separation, anti-icing and self-cleaning. However, due to the instability caused by its fragile structure and non-durable superhydrophobicity, it is difficult to apply them in the actual field. Here, by introducing surface wettability and analysing the mechanism of superhydrophobic failure, it is concluded that the reason for the failure of the superhydrophobic surface comes from the transition of the surface energy and the hysteresis of the contact angle (CA). On the basis of this analysis, it is concluded that the principle of designing a durable superhydrophobic surface is to satisfy one of the following three points: improving the binding force between molecules, introducing durable materials and improving chemical durability. On this basis, a variety of preparation methods are proposed, such as assembly method and spray/dip coating method, and the design and preparation of a self-healing surface inspired by nature will also be included in the introduction. Last but not least, the preparation and application of a durable super-hydrophobic surface in oil-water separation, anti-icing and self-cleaning are also introduced in detail. This review reveals the conclusions and prospects of durable superhydrophobic surfaces, and aims to inspire more researchers to invest in this research.

Porosity-induced mechanically robust superhydrophobicity by the sintering and silanization of hydrophilic porous diatomaceous earth

HYPOTHESIS

Because they have self-similar low-surface-energy microstructures throughout the whole material block, fabricating superhydrophobic monoliths has been currently a promising remedy for the mechanical robustness of non-wetting properties. Noticeably, porous materials have microstructured interfaces throughout the complete volume, and silanization can make surfaces low-surface-energy. Therefore, the porous structure and surface silane-treatment can be combined to render hydrophilic inorganics into mechanically durable superhydrophobic monoliths.

EXPERIMENTS

Superhydrophobic diatomaceous earth pellets were produced by thermal-sintering, followed by a silanization process with octyltriethoxysilane. The durability of superhydrophobicity was evaluated by changes in wetting properties, surface morphology, and chemistry after a systematic abrasion sliding test.

FINDINGS

The intrinsic porosity of diatomite facilitated surface silanization throughout the whole sintered pellet, thus producing the water-repelling monolith. The abrasion sliding converted multimodal porosity of the volume to hierarchical roughness of the surface comprised of silanized particles, thereby attaining superhydrophobic properties of high contact angles over 150° and sliding angles below 20°. The tribological properties revealed useful information about the superhydrophobicity duration of the non-wetting monolith against friction. The result enables the application of porous structures in the fabrication of the anti-abrasion superhydrophobic materials even though they are originally hydrophilic.