Crystal Structure Regulation of Ferroelectric Poly(vinylidene fluoride) via Controlled Melt–Recrystallization

Unique Crystallization Characteristics of Pickering High Internal Phase Emulsion Templated Porous Constructs

To study the crystallization behavior of polymeric chains under the influence of porosity, the thermal properties of various nonporous and porous poly(ε-caprolactone) (PCL) based constructs were investigated. Porous cross-linked PCL nanocomposite constructs were fabricated utilizing in situ polymerization of CL-based surfactant-free Pickering high internal phase emulsions (HIPEs), stabilized using modified fumed silica nanoparticles (mSiNP) at a minimal concentration of 0.6 wt %. The corresponding nanocomposite constructs exhibited polyhedral pore morphology with significant pore roughness due to the presence of mSiNP. DSC thermograms of nonporous constructs illustrated diminished crystallization temperature and kinetics upon cross-linking and inclusion of mSiNP which confirmed suppressed mobility of polymer chains. Further introduction of porosity led to substantial supercooling, resulting in crystallization temperatures as low as -24 °C. Changes in the crystal structure of various nonporous and porous constructs were also studied using XRD. The crystallization behavior of porous constructs was finally evaluated using Jeziorny, Ozawa, and Mo theories under nonisothermal conditions. Significant deviation from the theoretical model, as observed in the case of porous constructs, implied a complex crystallization mechanism that eventually was not only controlled by the chain immobility due to cross-linking but also heterogeneity present in the wall thickness of the constructs. The unique melting-crystallization phenomenon observed in such constructs may further be expanded to other systems of high heat capacity for utilization as energy storage materials.

Designing Glass and Crystalline Phases of Metal-Bis(acetamide) Networks to Promote High Optical Contrast

Owing to their high tunability and predictable structures, metal-organic materials offer a powerful platform to study glass formation and crystallization processes and to design glasses with unique properties. Here, we report a novel series of glass-forming metal-ethylenebis(acetamide) networks that undergo reversible glass and crystallization transitions below 200 °C. The glass-transition temperatures, crystallization kinetics, and glass stability of these materials are readily tunable, either by synthetic modification or by liquid-phase blending, to form binary glasses. Pair distribution function (PDF) analysis reveals extended structural correlations in both single and binary metal-bis(acetamide) glasses and highlights the important role of metal-metal correlations during structural evolution across glass-crystal transitions. Notably, the glass and crystalline phases of a Co-ethylenebis(acetamide) binary network feature a large reflectivity contrast ratio of 4.8 that results from changes in the local coordination environment around Co centers. These results provide new insights into glass-crystal transitions in metal-organic materials and have exciting implications for optical switching, rewritable data storage, and functional glass ceramics.

Comparative Study of PVDF Sheets and Their Sensitivity to Mechanical Vibrations: The Role of Dimensions, Molecular Weight, Stretching and Poling

This paper is focused on the comparative study of the vibration sensing capabilities of poly(vinylidene fluoride) (PVDF) sheets. The main parameters such as molecular weight, initial sample thickness, stretching and poling were systematically applied, and their impact on sensing behavior was examined. The mechanical properties of prepared sheets were investigated via tensile testing on the samples with various initial thicknesses. The transformation of the α-phase to the electro-active β-phase was analyzed using FTIR after applying stretching and poling procedures as crucial post-processing techniques. As a complementary method, the XRD was applied, and it confirmed the crystallinity data resulting from the FTIR analysis. The highest degree of phase transformation was found in the PVDF sheet with a moderate molecular weight (Mw of 275 kDa) after being subjected to the highest axial elongation (500%); in this case, the β-phase content reached approximately 90%. Finally, the vibration sensing capability was systematically determined, and all the mentioned processing/molecular parameters were taken into consideration. The whole range of the elongations (from 50 to 500%) applied on the PVDF sheets with an Mw of 180 and 275 kDa and an initial thickness of 0.5 mm appeared to be sufficient for vibration sensing purposes, showing a d₃₃ piezoelectric charge coefficient from 7 pC N⁻¹ to 9.9 pC N⁻¹. In terms of the d₃₃, the PVDF sheets were suitable regardless of their Mw only after applying the elongation of 500%. Among all the investigated samples, those with an initial thickness of 1.0 mm did not seem to be suitable for vibration sensing purposes.

Interfacial Nanostructuring of Poly(vinylidene fluoride) Homopolymer with Predominant Ferroelectric Phases

Facile preparation of poly(vinylidene fluoride) (PVDF) homopolymer nanoparticles (NPs) with monodispersed size distribution and predominant ferroelectric phases was done in an interfacial nonsolvent (water/methanol)-solvent (dimethylformamide (DMF))-polymer (PVDF) ternary system using two interfacial nanoassembly methods. First, a fluidic liquid-liquid interface consisting of two miscible solvents was created by introducing nonsolvent (water) under the PVDF solution. After the interface was created, the interface moved up to the DMF phase direction; PVDF NPs were produced through nonsolvent-induced phase separation. As the water content decreased in the nonsolvent by mixing with methanol, PVDF structures changed from nanoparticles with 252 nm average diameter (PVDF NP-1) to a porous membrane through membrane-wrapped NPs. The phenomena were found to be related to the mutual affinity of solvent, nonsolvent, and PVDF. When an additional external force was introduced to the water-DMF-PVDF system through magnetic stirring (reprecipitation method), smaller PVDF NPs with 61.4 nm diameter were obtained (PVDF NP-2). Both the as-prepared PVDF NPs were demonstrated with the predominant ferroelectric (electroactive (EA)) phase up to 97-98% among crystalline phases, which is apparently the highest value ever reported for PVDF homopolymer NPs. It is noteworthy that PVDF NP-2 showed a higher β phase ratio than that of PVDF NP-1, as proved using Fourier transform infrared (FT-IR) spectroscopy. Also, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) measurements revealed that PVDF NP-1 exhibited higher crystallinity and that PVDF NP-2 underwent a well-separated two-step phase transition under heating. Results suggest that controlling interface formation with DMF and water plays a crucial role in manipulating ferroelectric PVDF nanostructures in terms of crystallinity and the ferroelectric β phase-to-γ phase ratio.

Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries

The lithium-ion battery (LIB) industry has been in high demand for simple and effective methods to improve the electrochemical performance of LIBs. Here, we treated three different widely studied anode electrodes (i.e., Li₄Ti₅O₁₂, TiO₂, and graphite) under vacuum at 250 °C, and compared their electrochemical performance with and without a 250 °C treatment. Without changing the composition of the fabricated electrodes, all of the 250 °C treated electrodes exhibited enhanced specific capacities, and the lithium-ion diffusion was improved in different degrees. By comparing the results of scanning electron microscopy (SEM) and energy-dispersive spectroscopy of the pristine and 250 °C treated electrodes, the 250 °C treatment improved the distribution of a polyvinylidene difluoride (PVDF) binder in the electrodes, resulting in a higher porosity of the 250 °C treated electrodes. The results of X-ray photoelectron spectrometry and SEM of the cycled electrodes confirmed that a uniform distribution of the PVDF binder from the 250 °C treatment played a positive role in the formation of a solid electrolyte interphase layer, thereby delivering higher capacities and capacity retentions than those of electrodes without heat treatment. The simplicity of this modification method provides considerable potential for building high-performance LIBs at a larger scale.

Superwettable PVDF/PVDF-g-PEGMA Ultrafiltration Membranes

Poly(vinylidene fluoride) (PVDF) is a common and inexpensive polymeric material used for membrane fabrication, but the inherent hydrophobicity of this polymer induces severe membranes fouling, which limits its applications and further developments. Herein, we prepared superwettable PVDF membranes by selecting suitable polymer concentration and blending with PVDF-graft-poly(ethylene glycol) methyl ether methacrylate (PVDF-g-PEGMA). This fascinating interfacial phenomenon causes the contact angle of water droplets to drop from the initial value of over 70° to virtually 0° in 0.5 s for the best fabricated membrane. The wetting properties of the membranes were studied by calculating the surface free energy by surface thermodynamic analysis, by evaluating the peak height ratio from Raman spectra, and other surface characterization methods. The superwettability phenomenon is the result of the synergetic effects of high surface free energy, the Wenzel model of wetting, and the crystalline phase of PVDF. Besides superwettability, the PVDF/PVDF-g-PEGMA membranes show great improvements in flux performance, sodium alginate (SA) rejection, and flux recovery upon fouling.

Morphological Evolution of Tetrachlorinated Perylene Bisimides with Lengthy Alkyl Substituent Polycrystalline Thin Films during Reversible Phase Transitions

The phase behavior and related morphological evolution of thin films of lengthy alkyl substituted core-tetrachlorinated perylene bisimide (C18-4ClPBI), a large π-conjugated molecule, have been studied. It is found that the C18-4ClPBI can exist in two different crystalline phases depending on temperature, which transform reversibly in heating and cooling processes. The X-ray diffraction results demonstrate that the two crystalline forms of C18-4ClPBI exhibit a similar packing geometry but with different unit cell dimensions. It is confirmed that the low-temperature phase is packed more compactly than its high-temperature counterpart. During high-temperature to low-temperature crystalline phase transition, nonbirefringent protrusions were observed, which disassembled in the reverse crystalline phase transition process during heating. The exact formation mechanism of the protrusions is not clear at the moment. Nevertheless, their influence on the transfer characteristics of the polycrystalline C18-4ClPBI thin film has been clearly illustrated.

Polymorphic Behavior and Phase Transition of Poly(1-Butene) and Its Copolymers

The properties of semicrystalline polymeric materials depend remarkably on their structures, especially for those exhibiting a polymorphic behavior. This offers an efficient way to tailor their properties through crystal engineering. For control of the crystal structure, and therefore the physical and mechanical properties, a full understanding of the polymorph selection of polymers under varied conditions is essential. This has stimulated a mass of research work on the polymorphic crystallization and related phase transformation. Considering that the isotactic poly(1-butene) (iPBu) exhibits pronounced polymorphs and complicated transition between different phases, the study on its crystallization and phase transformation has attracted considerable attention during the past decades. This review provides the context of the recent progresses made on the crystallization and phase transition behavior of iPBu. We first review the crystal structures of known crystal forms and then their formation conditions and influencing factors. In addition, the inevitable form II to form I spontaneous transition mechanism and the transformation kinetics is reviewed based on the existing research works, aiming for it to be useful for its processing in different phases and the further technical development of new methods for accelerating or even bypass its form II to form I transformation.

Crystallographic features of poly(vinylidene fluoride) film upon an attractive substrate of KBr

Among all the polymorphs of poly(vinylidene fluoride) (PVDF), the polar γ-form possesses the highest melting point and electrical breakdown strength as well as the strongest solvent and irradiation resistance, which are beneficial for the durability of PVDF products.