Asymmetrical Morphology and Performance of Composite Colloidal Particles Controlled via Hydrophilic Comonomer Addition Time in the Presence of Polyvinylidene Fluoride Latex

Synthesis of dimpled polymer particles and polymer particles with protrusions - Past, present, and future

Since the development of emulsion polymerization techniques, polymer particles have become the epitome of standard colloids due to the exceptional control over size, size distribution, and composition the synthesis methods allow reaching. The exploration of different variations of the synthesis methods has led to the discovery of more advanced techniques, enabling control over their composition and shape. Many early investigations focused on forming particles with protrusions (with one protrusion, called dumbbell particles) and particles with concavities, also called dimpled particles. This paper reviews the literature covering the synthesis, functionalization, and applications of both types of particles. The focus has been on the rationalization of the various approaches used to prepare such particles and on the discussion of the mechanisms of formation not just from the experimental viewpoint but also from the standpoint of thermodynamics. The primary motivation to combine in a single review the preparation of both types of particles has been the observation of similarities among some of the methods developed to prepare dimpled particles, which sometimes include the formation of particles with protrusions and vice versa. The most common applications of these particles have been discussed as well. By looking at the different approaches developed in the literature under one general perspective, we hope to stimulate a more ample use of these particles and promote the development of even more effective synthetic protocols.

Synthetic Strategies for Polymer Particles with Surface Concavities

Over the past decade or so, there has been increasing interest in the synthesis of polymer particles with surface concavities, which mainly include golf ball-like, dimpled and surface-wrinkled polymer particles. Such syntheses generally can be classified into direct polymerization and post-treatment on preformed polymer particles. This review aims to provide an overview of the synthetic strategies of such particles. Some selected examples are given to present the formation mechanisms of the surface concavities. The applications and future development of these concave polymer particles are also briefly discussed. This article is protected by copyright. All rights reserved.

A strategy for preparing controllable, superhydrophobic, strongly sticky surfaces using SiO2@PVDF raspberry core-shell particles

In nature, wetting by water droplets on superhydrophobic materials is governed by the Cassie-Baxter or Wenzel models. Moreover, sticky properties, derived from these types of wettings, are required for a wide range of applications involving superhydrophobic materials. As a facile new strategy, a method employing a gaseous fluorine precursor to fabricate core-shell particles, comprising perfectly shaped fluorine shells with adjustable adhesive strength, is described in this paper. Silica was used as the hydrophilic core, while polyvinylidene fluoride (PVDF) was used for the hydrophobic shell coating, forming a raspberry-like shape. In addition, controlling the amount of PVDF coated on the silica surface enabled the water droplets to come into contact with both the PVDF of the shell and the silica of the core, thereby controlling both the superhydrophobicity and the adhesive strength. Thus, the synthesized particles formed a structured coating with controllable stickiness and contact angles of 131-165°. Furthermore, on surfaces with high adhesivity, the water droplets remained stable at tilt angles of 90° and 180° even under a strong centrifugal force, whereas on surfaces with low adhesivity, the water droplets slid off when the substrate was tilted at 4°.

Capillary Action-Inspired Nanoengineering of Spheres-on-Sphere Microspheres with Hollow Core and Hierarchical Shell

The current syntheses of spheres-on-sphere (SOS) microsphere, which possesses both hollow cavity and hierarchical structure, mainly rely on complicated routes and template removal. In this study, a one pot nanoengineering strategy inspired by the automatic transport behavior of water in plants is successfully developed to fabricate SOS microsphere in tandem with a traditional soft template method in the preparation of hollow structure. Amphiphilic siloxane oligomers generated in situ from methyltriethoxylsilane (MTES) under acidic conditions are anchored on the surface of soft template St monomer droplets, sequentially completing hydrolysis-polycondensation and forming a mesoporous polysilsesquioxane (PSQ) shell. Then, the St monomers located in cavity migrate outward under the combined action of capillary force stemming from mesoporous and osmotic pressure generating from inside-outside of the PSQ shell and polymerize on the outside of the hollow PSQ shell, in which residual siloxane oligomers further anchor on the polystyrene (PS) surface to reduce the surface energy of the system, finally resulting in the successful formation of SOS particles. To reduce thermal insulation coefficient of the material, the PS phase in SOS particles is removed to obtain the particles with multiscale hollow structure (SOS-MH), which have more hollow cavities to encapsulate more air. The presence of a much hollow structure in SOS-MH particles enables the thermal conductivity of polyacrylonitrile (PAN)/SOS-MH composite fibrous membranes (0.0307 W m^-1 K^-1) to decrease by about 40% compared to that of pure PAN fibrous films (0.0520 W m^-1 K^-1) at the same thickness of 1 mm, and the material also has moisture resistance due to the existence of a hierarchical shell.

Facile fabrication, morphology control, and modification of polymeric yolk-shell microspheres

The fabrication and functionalization of polymeric yolk-shell microspheres (YSMs), possessing a hollow shell and a movable core, is interesting but challenging in materials science. Here we report the facile fabrication, morphology control, and fluorescent modification of polymeric YSMs, which have a spherical core of poly(vinylidene fluoride) (PVDF) and a hollow shell of poly(styrene-co-glycidyl methacrylate). First, flower-like microspheres with core-shell structures are synthesized via seeded surface nucleation in an emulsion polymerization of styrene, glycidyl methacrylate, and divinylbenzene by using PVDF microparticles as seeds. Both the feed ratio and the polymerization time are considered to manipulate the core-shell structures of the composite microparticles, which obviously influences the morphology of the YSMs obtained from the subsequent treatment of solvent etching to remove the seed. The hollow volume of the polymeric YSMs is easily adjusted by changing the etching time at different temperatures. Meanwhile, we realized three-dimensionally confined crystallization of PVDF in different morphologies of YSMs. Furthermore, YSMs with the same or different functional groups, inside and outside of the hollow shell, respectively, are chemically modified by the reaction of glycidyl groups on the shell with 2,2'-(ethylenedioxy) bis-ethylamine. Thus, strong fluorescence of the YSMs is observed by subsequent labeling with functional fluorescent groups.