Curcumin-Based Fluorescent and Colorimetric Probe for Detecting Cysteine in Living Cells and Zebrafish

A new ratiometric fluorescent probe for rapid and highly selective detection of Cysteine in bovine serum

As one of the most fundamental thiol compounds in the human body, cysteine (Cys) is involved in maintaining redox balance. Abnormal Cys levels can lead to various diseases. In this work, we successfully synthesized a fluorescent probe (CTBA) that can specifically detect Cys using acrylate as the reaction site, and CTBA has met the selectivity and anti-interference for Cys detection under optimized conditions. The linear range for Cys detection is between 0.05 and 100 μM and the detection limit is 0.0381 μM. Finally, this probe is used to detect the Cys content in three bovine serum samples and the test results are satisfactory.

A curcumin-based AIEE-active fluorescent probe for Cu2+ detection in aqueous solution

Curcuminoids have been extensively investigated as metal ion probes, but the intrinsic aggregation-caused-quenching (ACQ) characteristic of curcumin would hinder their applications in aqueous solution. Fortunately, tetraphenylethylene (TPE) could endow the compounds with aggregation-induced emission (AIE)/aggregation-induced enhanced emission (AIEE) characteristics to eliminate the ACQ effect. According to this strategy, a series of TPE-modified curcumin derivatives L1–4 were prepared and studied for their AIEE properties. Among the four TPE-curcumin analogues, only L1 particles have been successfully used as an on-off fluorescence probe for detecting Cu²⁺ in aqueous solution. The fluorescence titration experiment determined its detection limit of 1.49 × 10⁻⁷ mol L⁻¹, and the binding ratio between L1 and Cu²⁺ was estimated as 2 : 1, which was in agreement with the results of high resolution mass spectrum and Job's plot. In addition, the binding constant was evaluated as 6.77 × 10² M⁻¹ using a Benesi–Hildebrand plot. Finally, the obtained L1-based indicator paper showed significant fluorescence response to Cu²⁺ aqueous solution. This TPE-modified strategy improves the detection capability of curcumin probe in aqueous solution and provides a feasible way to obtain other probes with ACQ characteristics.

A curcumin-based AIEE-active L1 was synthesized and used to prepare an on-off fluorescent probe for Cu²⁺ detection in aqueous solution.

Curcumin Is an Iconic Ligand for Detecting Environmental Pollutants

The rapid increase in industrial revolution and the consequent environmental contamination demands continuous monitoring and sensitive detection of the pollutants. Nanomaterial-based sensing system has proved to be proficient in sensing environmental pollutants. The development of novel ligands for enhancing the sensing efficiency of nanomaterials has always been a challenge. However, the amendment of nanostructure with molecular ligand increases the sensitivity, selectivity, and analytical performance of the resulting novel sensing platform. Organic ligands are capable of increasing the adsorption efficacy, optical properties, and electrochemical properties of nanomaterials by reducing or splitting of band gap. Curcumin (diferuloylmethane) is a natural organic ligand that exhibits inherent fluorescence and electrocatalytic property. Due to keto-enol tautomerism, it is capable of giving sensitive signals such as fluorescence, luminescence, ultraviolet absorption shifts, and electrochemical data. Curcumin probes were also reported to give enhanced meterological performances, such as low detection limit, repeatability, reproducibility, high selectivity, and high storage stability when used with nanosystem. Therefore, research on curcumin-modified nanomaterials in the detection of environmental pollution needs a special focus for prototype and product development to enable practical use. Hence, this article reviews the role of curcumin as a natural fluorophore in optical and electrochemical sensing of environmentally significant pollutants. This review clearly shows that curcumin is an ideal candidate for developing and validating nanomaterials-based sensors for the detection of environmental pollutants such as arsenic, lead, mercury, boron, cyanide, fluoride, nitrophenol, trinitrotoluene, and picric acid and toxic gases such as ammonia and hydrogen chloride. This review will afford references for future studies and enable researchers to translate the lab concepts into industrial products.

A highly selective quinolizinium-based fluorescent probe for cysteine detection

A novel fluorescent quinolizinium-based turn-off probe has been developed for selective detection of cysteine. The probe showed high selectivity and sensitivity towards cysteine over other amino acids including the similarly structured homocysteine and glutathione with a detection limit of 0.18 μM (S/N = 3). It was successfully applied to cysteine detection in living cells with low cytotoxicity and quantitative analysis of spiked mouse serum samples with moderate to good recovery (96-109%).

Research Progress of Small Molecule Fluorescent Probes for Detecting Hypochlorite

Hypochlorous acid (HOCl) generates from the reaction between hydrogen peroxide and chloride ions via myeloperoxidase (MPO)-mediated in vivo. As very important reactive oxygen species (ROS), hypochlorous acid (HOCl)/hypochlorite (OCl⁻) play a crucial role in a variety of physiological and pathological processes. However, excessive or misplaced production of HOCl/OCl⁻ can cause variety of tissue damage and human diseases. Therefore, rapid, sensitive, and selective detection of OCl⁻ is very important. In recent years, the fluorescent probe method for detecting hypochlorous acid has been developed rapidly due to its simple operation, low toxicity, high sensitivity, and high selectivity. In this review, the progress of recently discovered fluorescent probes for the detection of hypochlorous acid was summarized with the aim to provide useful information for further design of better fluorescent probes.

An insight into the in vivo imaging potential of curcumin analogues as fluorescence probes

Curcumin and its derivatives have good electrical and optical properties due to the highly symmetric structure of delocalized π electrons. Apart from that, curcumin and its derivatives can interact with numerous molecular targets, thereby exerting less side effects on human body. The fluorescence emission wavelength and fluorescence intensity of curcumin can be enhanced by modifying its π-conjugated system and ß-diketone structure. Some curcumin-based fluorescent probes have been utilized to detect soluble/insoluble amyloid-ß protein, intracranial reactive oxygen species, cysteine, cancer cells, etc. Based on the binding characteristics of curcumin-based fluorescent probes with various target molecules, the factors affecting the fluorescence intensity and emission wavelength of the probes are analyzed, in order to obtain a curcumin probe with higher sensitivity and selectivity. Such an approach will be greatly applicable to in vivo fluorescence imaging.

Fluorescent Probes for Live Cell Thiol Detection

Thiols play vital and irreplaceable roles in the biological system. Abnormality of thiol levels has been linked with various diseases and biological disorders. Thiols are known to distribute unevenly and change dynamically in the biological system. Methods that can determine thiols' concentration and distribution in live cells are in high demand. In the last two decades, fluorescent probes have emerged as a powerful tool for achieving that goal for the simplicity, high sensitivity, and capability of visualizing the analytes in live cells in a non-invasive way. They also enable the determination of intracellular distribution and dynamitic movement of thiols in the intact native environments. This review focuses on some of the major strategies/mechanisms being used for detecting GSH, Cys/Hcy, and other thiols in live cells via fluorescent probes, and how they are applied at the cellular and subcellular levels. The sensing mechanisms (for GSH and Cys/Hcy) and bio-applications of the probes are illustrated followed by a summary of probes for selectively detecting cellular and subcellular thiols.

Phytochemicals toward Green (Bio)sensing

Because of numerous inherent and unique characteristics of phytochemicals as bioactive compounds derived from plants, they have been widely used as one of the most interesting nature-based compounds in a myriad of fields. Moreover, a wide variety of phytochemicals offer a plethora of fascinating optical and electrochemical features that pave the way toward their development as optical and electrochemical (bio)sensors for clinical/health diagnostics, environmental monitoring, food quality control, and bioimaging. In the current review, we highlight how phytochemicals have been tailored and used for a wide variety of optical and electrochemical (bio)sensing and bioimaging applications, after classifying and introducing them according to their chemical structures. Finally, the current challenges and future directions/perspective on the optical and electrochemical (bio)sensing applications of phytochemicals are discussed with the goal of further expanding their potential applications in (bio)sensing technology. Regarding the advantageous features of phytochemicals as highly promising and potential biomaterials, we envisage that many of the existing chemical-based (bio)sensors will be replaced by phytochemical-based ones in the near future.

Phosphorescent iridium(III) complex for efficient sensing of hypochlorite and imaging in living cells

In consideration of the strong oxidizing power of hypochlorite (ClO^-), which could cleave CN moiety, a cyclometalated iridium (III) complex (Ir-Ts) modified hydrazide group as the response unit was synthesized to sensitively and selectively detect ClO^- under neutral condition. Upon addition of ClO^-, a 21-fold emission enhancement at 574 nm was observed and phosphorescent product was formed due to the cleavage of CN moiety. The probe Ir-Ts displayed rapid response (<15 s) and high selectivity toward ClO^- with a low detection limit of 86 nM. More importantly, bioimaging of ClO^- was further studied in living cells.

Curcumin-based sulfenic acid as a light switch for the binding of biothiols

Curcumin was used as a starting compound for the synthesis of a fluorescent precursor of sulfenic acid.

An enhanced fluorescence sensor for specific detection Cys over Hcy/GSH and its bioimaging in living cells

Cysteine (Cys) is not only the central matter of sulfur metabolism in cells but also the only amino acid with reduced thiol group in 20 kinds of natural amino acids. In animal cells, Cys is taking part in many important and essential biological functions including protein synthesis, detoxification and metabolism. The development and application of fluorescent probes for the detection of Cys have attracted more and more attention and interest. Herein, we report a new fluorescent probe NFA that utilized naphthyl carboxy fluorescein as fluorophore and acryloyl group as reaction site for Cys specific detection. The probe essentially has weak fluorescence. Cys addition to NFA containing system induced distinct enhanced fluorescence emission which was attributed to the nucleophilic reaction of cysteine and acryloyl to release the fluorophore. The signal fluorescent response detection system allows NFA to be a reliable tool for Cys detection with low detection limit (0.58 μM). And NFA has been successfully applied for Cys imaging specifically in live Hela cells, which promotes the probe as a potential tool to understand the pathology of Cys related diseases.

Handy fluorescent paper device based on a curcumin derivative for ultrafast detection of peroxide-based explosives

A useful and inexpensive fluorescent paper-based device was fabricated for ultrafast sensing of peroxide-based explosives.

A near-infrared fluorescent probe for direct and selective detection of cysteine over homocysteine and glutathione

In this work, we have designed and synthesized the fluorescent probe 1, which showed a highly selective and sensitive response to Cys over Hcy/GSH in the test. Moreover, the color of probe solution has changed dramatically from colorless to pink with the addition of Cys within 10 min. Meanwhile, the fluorescence intensity exhibited perfectly positive correlation with concentration of Cys from 0 to 200 μM, which offered the important condition for quantitative analysis. Finally, the bioimaging and fluorescence response of probe 1 for fetal calf serum are a powerful safeguard for practical detection of Cys. Therefore, this near-infrared probe will be of great benefit for detecting Cys in the biological systems.

Highly selective and ratiometric fluorescent nanoprobe for the detection of cysteine and its application in test strips

Cysteine (Cys) is a bithiol that plays a vital role in many physiological processes. However, it is difficult to discriminate Cys from homocysteine (Hcy) and glutathione (GSH), due to their similar chemical structures and reactivity. Herein, we have developed a polymeric nanoprobe, nanoHFA, for ratiometric, highly selective, and sensitive detection of Cys based on 7-hydroxycoumarin-3-carboxylic acid (HC) and fluorescein isothiocyanate (FITC)-acrylate (FITC-A) group-functionalized lipopolymer DSPE-PEG. The probe nanoHFA showed a strong fluorescence emission peak centered at 450 nm attributed to HC and a weak fluorescence emission peak centered at 520 nm due to the photoinduced electron transfer (PET) process of FITC induced by acrylate group. In the presence of Cys, the fluorescence signal at 520 nm could be lit up and the ratio of F_520nm/F_450nm showed a good linear relationship in the range of 5-60 μM with a low detection limit of 0.37 μM. The probe also displayed excellent water solubility and high selectivity to Cys over other biothiols such as Hcy and GSH. Moreover, we further used probe nanoHFA to detect Cu²⁺ ions in the range of 100-550 nM with a detection limit of 77 nM. The nanoprobe was successfully applied for the quantitative detection of Cys in fetal bovine serum, and fluorescent strips were developed for facile and visual detection of Cys and Cu²⁺ ions. Graphical abstract ᅟ.