Multistimuli Activation of TiO2/α-Alumina Membranes for Degradation of Methylene Blue

Membrane-catalysis integrated system for contaminants degradation and membrane fouling mitigation: A review

The integration of catalytic degradation and membrane separation processes not only enables continuous degradation of contaminants but also effectively alleviates inevitable membrane fouling, demonstrating fascinating practical value for efficient water purification. Such membrane-catalysis integrated system (MCIS) has attracted tremendous research interest from scientists in chemical engineering and environmental science recently. In this review, the advantages of MCIS are discussed, including the membrane structure regulation, stable catalyst loading, nano-confinement effect, and efficient natural organic matter (NOM) exclusion, highlighting the synergistic effect between membrane separation and catalytic process. Subsequently, the design considerations for the fabrication of catalytic membranes, including substrate membrane, catalytic material, and fabrication method, are comprehensively summarized. Afterward, the mechanisms and performance of MCIS based on different catalytic types, including liquid-phase oxidants/reductants involved MCIS, gas involved MCIS, photocatalysis involved MCIS, and electrocatalysis involved MCIS are reviewed in detail. Finally, the research direction and future perspectives of catalytic membranes for water purification are proposed. The current review provides an in-depth understanding of the design of catalytic membranes and facilitates their further development for practical applications in efficient water purification.

Mesoporous SiC-Based Photocatalytic Membranes and Coatings for Water Treatment

Photocatalytically active silicon carbide (SiC)-based mesoporous layers (pore sizes between 5 and 30 nm) were synthesized from preceramic polymers (polymer-derived ceramic route) on the surface and inside the pores of conventional macroporous α-alumina supports. The hybrid membrane system obtained, coupling the separation and photocatalytical properties of SiC thin films, was characterized by different static and dynamic techniques, including gas and liquid permeation measurements. The photocatalytic activity was evaluated by considering the degradation efficiency of a model organic pollutant (methylene blue, MB) under UV light irradiation in both diffusion and permeation modes using SiC-coated macroporous supports. Specific degradation rates of 1.58 × 10^-8 mol s^-1 m^-2 and 7.5 × 10^-9 mol s^-1 m^-2 were obtained in diffusion and permeation modes, respectively. The performance of the new SiC/α-Al₂O₃ materials compares favorably to conventional TiO₂-based photocatalytic membranes, taking advantage of the attractive physicochemical properties of SiC. The developed synthesis strategy yielded original photocatalytic SiC/α-Al₂O₃ composites with the possibility to couple the ultrafiltration SiC membrane top-layer with the SiC-functionalized (photocatalytic) macroporous support. Such SiC-based materials and their rational associations on porous supports offer promising potential for the development of efficient photocatalytic membrane reactors and contactors for the continuous treatment of polluted waters.

Light-Induced Clusterization of Gold Nanoparticles: A New Photo-Triggered Antibacterial against E. coli Proliferation

Metallic nanoparticles show plasmon resonance phenomena when irradiated with electromagnetic radiation of a suitable wavelength, whose value depends on their composition, size, and shape. The damping of the surface electron oscillation causes a release of heat, which causes a large increase in local temperature. Furthermore, this increase is enhanced when nanoparticle aggregation phenomena occur. Local temperature increase is extensively exploited in photothermal therapy, where light is used to induce cellular damage. To activate the plasmon in the visible range, we synthesized 50 nm diameter spherical gold nanoparticles (AuNP) coated with polyethylene glycol and administered them to an E. coli culture. The experiments were carried out, at different gold nanoparticle concentrations, in the dark and under irradiation. In both cases, the nanoparticles penetrated the bacterial wall, but a different toxic effect was observed; while in the dark we observed an inhibition of bacterial growth of 46%, at the same concentration, under irradiation, we observed a bactericidal effect (99% growth inhibition). Photothermal measurements and SEM observations allowed us to conclude that the extraordinary effect is due to the formation, at low concentrations, of a light-induced cluster of gold nanoparticles, which does not form in the absence of bacteria, leading us to the conclusion that the bacterium wall catalyzes the formation of these clusters which are ultimately responsible for the significant increase in the measured temperature and cause of the bactericidal effect. This photothermal effect is achieved by low-power irradiation and only in the presence of the pathogen: in its absence, the lack of gold nanoparticles clustering does not lead to any phototoxic effect. Therefore, it may represent a proof of concept of an innovative nanoscale pathogen responsive system against bacterial infections.

Supported nanostructured photocatalysts: the role of support-photocatalyst interactions

Heterogeneous photocatalysis employing semiconductor oxide photocatalysts is a sustainable and promising method for environmental remediation and clean energy generation. In this context, nanostructured photocatalysts, with at least one dimension in the 1‒100 nm size regime, have attracted ever-growing attention due to their unique and often enhanced size-dependent physicochemical properties. While their reduced size ensures enhanced photocatalytic performance, the same makes it difficult and time/energy-demanding to remove/recover such nanostructured photocatalysts from aqueous media. This fundamental limitation has paved the way towards developing supported nanophotocatalysts where the active photocatalytic nanostructures are coated on the surface of polymeric or inorganic support materials, often in a core@shell conformation. This arrangement solves the problem of photocatalysts' recovery for effective reuse or recycling and leads to improved and desired target properties due to specific photocatalyst-support interactions. While the enhanced physicochemical properties of supported photocatalysts have been widely studied in many target applications, the role of support-photocatalysts interactions in improving these properties remains unexplored. This review article provides an updated viewpoint on the photocatalyst-support interactions and the resulting unique physiochemical properties important for diverse photochemical applications and the design of practical devices. While exploring the properties of supported nanostructured metal oxide/sulfides photocatalysts such as TiO₂ and MoS₂, we also briefly discuss the common strategies employed to coat the active nanomaterials on the surface of different supports (organic/polymeric, inorganic, active, inert, and magnetic).

Catalytic membrane-based oxidation-filtration systems for organic wastewater purification: A review

Catalytic membranes can simultaneously realize physical separation and chemical oxidation in one integrated system, which is the frontier technology for effective removal of organic containments in wastewater treatment. The catalytic membrane coupled with advanced oxidation processes (AOPs) not only significantly enhances the pollutant removal efficiency but also inhibits the fouling of the membrane via self-cleaning. In this review, the preparation approaches of catalytic membranes including blending, surface coating, and bottom-up synthesis are comprehensively summarized. The different integrated catalytic membrane systems coupled with photocatalysis, Fenton oxidation, persulfate activations, ozonation and electrocatalytic oxidation are discussed in terms of mechanisms and performance. Besides, the principles, influencing factors, advantages and issues of the different catalytic membrane/oxidation systems are outlined comparatively. Finally, the future challenges, and research directions are suggested, which is conducive to the design and development of catalytic membrane-oxidation systems for practical remediation of organic containing wastewater.

The Evolution of Photocatalytic Membrane Reactors over the Last 20 Years: A State of the Art Perspective

The research on photocatalytic membrane reactors (PMRs) started around the year 2000 with the study of wastewater treatment by degradation reactions of recalcitrant organic pollutants, and since then the evolution of our scientific knowledge has increased significantly, broadening interest in reactions such as the synthesis of organic chemicals. In this paper, we focus on some initial problems and how they have been solved/reduced over time to improve the performance of processes in PMRs. Some know-how gained during these last two decades of research concerns decreasing/avoiding the degradation of the polymeric membranes, improving photocatalyst reuse, decreasing membrane fouling, enhancing visible light photocatalysts, and improving selectivity towards the reaction product(s) in synthesis reactions (partial oxidation and reduction). All these aspects are discussed in detail in this review. This technology seems quite mature in the case of water and wastewater treatment using submerged photocatalytic membrane reactors (SPMRs), while for applications concerning synthesis reactions, additional knowledge is required.

Functional catalytic membrane development: A review of catalyst coating techniques

Catalytic membranes combine catalytic activity with conventional filtration membranes, thus enabling diverse attractive benefits into the conventional membrane filtration processes, such as easy catalyst reuse, antifouling, anti-microbial, and enhancing process efficiency. Up to date, tremendous progresses have been made on functional catalytic membrane preparation and applications, which significantly advances the competitiveness of membrane technologies in process industries. The present article provides a critical and holistic overview of the current state of knowledge on existing catalyst coating techniques for functional catalytic membrane development. Based on coating mechanisms, the techniques are generally categorized into physical and chemical surface coating routes. For each technique, we first introduce fundamental principle, followed by a critical discussion of their applications with representative case studies. Advantages and drawbacks are also emphasized for different surface coating technologies. Finally, future perspectives are highlighted to provide deep insights into their future developments.

Polyacrylonitrile homogeneous blend hollow fiber membrane with stable structure as a substrate to support Fe/Mn oxide and its enhanced capability to purify dye wastewater

Blending different molecular weight polyacrylonitrile (PAN) was adopted to solve the shrinkage problem of high molecular weight PAN hollow fiber membrane, to enhance the application performance of low molecular weight PAN membrane, and to adjust the porosity, pore size distribution, and hydrophilicity of the end product. The structurally-optimized membrane was chosen as a substrate to support Fe/Mn oxides and then used as a reactor to remove dyes from their solutions in the presence of H2O2. The results showed that the flux of methylene blue (MB) aqueous solution was 83.7 L/m2 h for the PAN homogeneous blend membrane, much higher than 29.1 L/m2 h of high molecular weight PAN membrane; MB removal efficiency was 97.3%, higher than 62.3% of low molecular weight PAN membrane, and it could be reused 25 times to remove dyes from their solutions without any loss in removal efficiency. The membrane was also found to have the application advantages of decreasing H2O2 dosage, reducing operation pressure, and raising MB removal efficiency compared with other membranes reported in the pieces of literature. Therefore, we were confident that the hollow fiber membrane fabricated by us would exhibit great application potential in the field of decontaminating dye wastewater.

WO3/Buckypaper Membranes for Advanced Oxidation Processes

Photocatalytic materials, such as WO₃, TiO₂, and ZnO nanoparticles, are commonly linked onto porous polymer membranes for wastewater treatment, fouling mitigation and permeation enhancement. Buckypapers (BPs) are entanglements of carbon nanotubes, which have been recently proposed as innovative filtration systems thanks to their mechanical, electronic, and thermal properties. In this work, flexible membranes of single wall carbon nanotubes are prepared and characterized as efficient substrates to deposit by chemical vapor deposition thin layers of WO₃ and obtain, in such a way, WO₃/BP composite membranes for application in advanced oxidation processes. The photocatalytic efficiency of WO₃/BP composite membranes is tested against model pollutants in a small continuous flow reactor and compared with the performance of an equivalent homogeneous WO₃-based reactor.

Galvanic Replacement-Enabled Synthesis of In(OH)3/Ag/C Nanocomposite as an Effective Photocatalyst for Ultraviolet C Degradation of Methylene Blue

Sub-10 nm indium metal nanoparticles (In NPs) stabilized on conductive carbon were reacted with silver nitrate in dark conditions in water at room temperature in a galvanic replacement manner to produce an indium hydroxide/silver/carbon nanocomposite (In(OH)3/Ag/C). The chosen carbon imparted colloidal stability, high surface area, and water dispersibility suitable for photodegradation of harmful dyes in water. The size and shape of indium hydroxide and silver nanoparticles produced were found to be 6.6 ± 0.9 nm, similar to that of the In NPs that were started with. The nanocomposite was characterized by transmission electron microscopy, energy dispersive X-ray spectroscopy, powder X-ray diffraction, and thermogravimetric analysis. The galvanic reaction between In NPs and silver nitrate was tracked with UV-vis spectroscopy in a control experiment without a carbon substrate to confirm that the reaction was indeed thermodynamically spontaneous as indicated by the positive electromotive force (EMF) of +1.14 V calculated for In/Ag+ redox couple. The photocatalytic performance of the nanocomposite was evaluated to be approximately 90% under UVC radiation when 10 ppm of methylene blue and 13 wt % of indium hydroxide/silver loading on carbon were used.

Poly (N-vinyl imidazole) gel-filled membrane adsorbers for highly efficient removal of dyes from water

Energy-efficient and time-saving process for recovery of hazardous dyes from wastewater is highly desired in dyeing industry. In this work, poly(N-vinyl imidazole) (PVI) gel-filled membrane adsorbers were developed for highly efficient recovery of dyes through adsorption filtration. The membrane adsorbers were fabricated via dip-coating of Nylon macroporous membranes in PVI solutions followed by quaternization crosslinking with p-xylylene dichloride (XDC). Physicochemical characterizations indicated that PVI gel was successfully filled and fixed inside the Nylon matrix. In optimized conditions. The treating capacity of membrane adsorbers to typical dye sunset yellow (25 ppm of the feed concentration) reached up to 197 mg/g with the removal ratio >99%. Both the treating capacity and the removal ratio were kept steady even when the permeation flux was as high as 1000 L/m² h. The membrane adsorbers developed in this work were able to not only remove anionic dyes from water, but also separate anionic dyes from cationic ones. The zeta potential and adsorption tests showed that the electrostatic interaction between PVI gel and dye molecules was responsible for the high removal efficiencies to anionic dyes. The membrane adsorbers can be regenerated effectively with NaOH solution and demonstrated good stability in both acidic and alkaline conditions.

Chemical Vapor Deposition of Photocatalyst Nanoparticles on PVDF Membranes for Advanced Oxidation Processes

The chemical binding of photocatalytic materials, such as TiO₂ and ZnO nanoparticles, onto porous polymer membranes requires a series of chemical reactions and long purification processes, which often result in small amounts of trapped nanoparticles with reduced photocatalytic activity. In this work, a chemical vapor deposition technique was investigated in order to allow the nucleation and growth of ZnO and TiO₂ nanoparticles onto polyvinylidene difluoride (PVDF) porous membranes for application in advanced oxidation processes. The thickness of obtained surface coatings by sputtered nanoparticles was found to depend on process conditions. The photocatalytic efficiency of sputtered membranes was tested against both a model drug and a model organic pollutant in a small continuous flow reactor.

Titania nanowires coated PEI/P25 membranes for photocatalytic and ultrafiltration applications

Bulk compositing and surface functionalization are combined to achieve a polymeric membrane that is covered with TiO₂ nanowires, which possesses multi-functions of photodegradation, separation and self-cleaning.