Selective Reduction of Nitrite to Nitrogen with Carbon-Supported Pd–AOT Nanoparticles

Development of Pd-based catalysts for hydrogenation of nitrite and nitrate in water: A review

Pd-based catalytic hydrogenation for nitrate decontamination has been the subject of extensive research over the past 30 years. Advances in computational simulation, nanomaterial synthesis, and experimental characterization in the past decade have generated new understandings of the reaction mechanisms, guided the development of various catalysts with enhanced performance, and brought revolutionary upgrades to conventional nitrate treatment technologies. However, technical and economic challenges are still limiting its large-scale implementation. In this review, we provide a brief summary of the up-to-date reaction pathways. We then critically examine the methods for the synthesis of supported Pd-based catalysts and the supports that are used for the immobilization of Pd-based catalysts, identifying candidate catalysts with the most promising future. To facilitate practical deployment and niche applications of catalytic hydrogenation, we introduce alternative easy-to-handle hydrogen carriers and cost-effective metal catalysts that can potentially substitute precious Pd. Afterwards, we emphasize the significance of new development in hybrid catalytic systems that couple catalytic processes with other modules, enabling economically and sustainably treating nitrate-contaminated water. Future research needs are accordingly proposed. Through this review, we aim to provide guidance for standardized catalyst synthesis strategies and candidate catalyst evaluation and motivate future research that produces catalysts with industrially relevant performance.

Toward In-Field Determination of Nitrate Concentrations Via Diffusive Gradients in Thin Films-Incorporation of Reductants and Color Reagents

Diffusive gradients in thin films (DGTs) have been established as useful tools for the determination of nitrate, phosphate, trace metals, and organic concentrations. General use of DGTs, however, is limited by the subsequent requirement for laboratory analysis. To increase the uptake of DGT as a tool for routine monitoring by nonspecialists, not researchers alone, methods for in-field analysis are required. Incorporation of color reagents into the binding layer, or as the binding layer, could enable the easy and accurate determination of analyte concentrations in-field. Here, we sought to develop a chitosan-stabilized silver nanoparticle (AuNP) suspension liquid-binding layer which developed color on exposure to nitrite, combined with an Fe(0)-impregnated poly-2-acrylamido-2-methyl-1-propanesulfonic acid/acrylamide copolymer hydrogel [Fe(0)-p(AMPS/AMA)] for the reduction of nitrate. The AuNP-chitosan suspension was housed in a 3D designed and printed DGT base, with a volume of 2 mL, for use with the standard DGT solution probe caps. A dialysis membrane with a molecular weight cutoff of <15 kDa was used, as part of the material diffusion layer, to ensure that the AuNP-chitosan did not diffuse through to the bulk solution. This synthesized AuNP-chitosan provided quantitative nitrite concentrations (0 to 1000 mg L-1) and masses (145 μg) in laboratory-based color development studies. An Fe(III)-impregnated poly-2-acrylamido-2-methyl-1-propanesulfonic acid/acrylamide copolymer hydrogel [Fe(III)-p(AMPS/AMA)] was developed (10% AMPS, and 90% AMA), which was treated with NaBH4 to form an Fe(0)-p(AMPS/AMA) hydrogel. The Fe(0)-p(AMPS/AMA) hydrogel quantitatively reduced nitrate to nitrite. The total nitrite mass produced was ∼110 μg, from nitrate. The diffusional characteristics of nitrite and nitrate through the Fe(III)-p(AMPS/AMA) and dialysis membrane were 1.40 × 10-5 and 1.40 × 10-5 and 5.05 × 10-6 and 5.15 × 10-6 cm2 s-1 at 25 °C respectively. The Fe(0)-hydrogel and AuNP-chitosan suspension operated successfully in laboratory tests individually; however, the combined AuNP-chitosan suspension and Fe(0)-hydrogel DGT did not provide quantitative nitrate concentrations. Further research is required to improve the reaction rate of the AuNP-chitosan nitrite-binding layer, to meet the requirement of rapid binding to operate as a DGT.