Fabrication of M@CuxO/ZnO (M= Ag, Au) Heterostructured Nanocomposite with Enhanced Photocatalytic Performance under Sunlight

Spinel Phase Engineering Boosted Visible-Light Photocatalytic Activity in Co1-xSrxCr2O4

We synthesized Sr-doped spinel CoCr2O4 using the solution combustion method and characterized the structure, morphology, chemical state, and photocatalytic properties through different techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and electrochemical impedance spectroscopy (EIS). 30-50 nm cuboid CoCr2O4 nanocrystals with Sr doping levels ranging from 0 to 0.6% were obtained; the increasing Sr doping deformed the coordination number of Co and Cr, transitioning to octahedral and tetrahedral units, inducing the phase transition from spinel to inverse spinel at 0.6% Sr content. This modification enhanced optical absorption, reduced the energy band gap, increased photoluminescence intensity, and maintained a high-spin state with oxygen vacancies. 0.6% Sr-doped CoCr2O4 demonstrated the highest photocatalytic efficiency at 93%. The XRD structure and photocatalytic activity remained at 87% over 7 cycles after 14 h. Employing degradation pathways and Mott-Schottky curves elucidated the enhancement mechanism.

Magnetic grinding synthesis of copper sulfide-based photocatalytic composites for the degradation of organic dyes under visible light

CuS based composites prepared by magnetic grinding method with metal and sulfur powder as raw materials have photocatalytic activity.

Decorating of Ag and CuO on ZnO Nanowires by Plasma Electrolyte Oxidation Method for Enhanced Photocatalytic Efficiency

In this work, photocatalytic performance is divulged in the ternary CuO-Ag-ZnO nanowire synthesized via a two-step approach. The decoration of Ag and CuO nanostructures onto the surface of ZnO nanowires was simply carried out by using the plasma electrolytic oxidation method in a short time. The structure, size, morphology, and optical properties of as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, and spectrophotometry measurements. The diameters of Ag nanoparticles and ZnO nanoflowers are in the range of 5–20 nm and 20–60 nm, respectively. Within the first 15 min, methyl orange was decolorized 96.3 and 82.8% in the CuO-Ag-ZnO and Ag-ZnO, respectively, and there is only about 46.7% of that decomposed in pure ZnO. The CuO-Ag-ZnO shows a higher rate constant k = 0.2007 min−1 and a lower half-life time t = 6.1 min compared to Ag-ZnO and bare ZnO nanowires. The photo-reusability of the ternary nanostructures was estimated to be much outweighed compared to ZnO nanowires. Interestingly, the synergic incorporation between noble metal–semiconductor or semiconductor–semiconductor in the interfaces of Ag-CuO, Ag-ZnO, and CuO-ZnO expands the visible light absorption range and eliminates the photogenerated electron–hole recombination, resulting in a superior visible-light-driven photocatalyst.

Ag-SPR and semiconductor interface effect on a ternary CuO@Ag@Bi2S3 Z-scheme catalyst for enhanced removal of HIV drugs and (photo)catalytic activity

The development of ternary composites has gained great interest as they can be used as a catalyst due to the different semiconductors with the variation in the band edge positions creates a potential gradient at the composite interface.

ZIF-8 templated assembly of La3+-anchored ZnO distorted nano-hexagons as an efficient active photocatalyst for the detoxification of rhodamine B in water

The use of lanthanum-anchored zinc oxide distorted hexagon (La@ZnO DH) nanoclusters as an active material for the photodegradation of rhodamine B (Rh-B) dye via hydrogen bonding, electrostatic, and π-π interactions is examined herein. The active photocatalyst is derived from porous zeolite imidazole frameworks (ZIF-8) via a combined ultrasonication and calcination process. The distorted hexagon nanocluster morphology with controlled surface area is shown to provide excellent catalytic activity, chemical stability and demarcated pore volume. In addition, the low bandgap (3.57 eV) of La@ZnO DH is shown to expand the degradation of Rh-B under irradiation of UV light as compared to the pristine ZIF-8-derived ZnO photocatalyst due to inhibited recombination of electrons and holes. The outstanding physicochemical stability and enhanced performance of La@ZnO DH could be ascribed to the synergistic interaction among La3+ particles and the ZnO nanoclusters and provide a route for their utilization as a promising catalyst for the detoxification of Rh-B.

Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500 °C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly.

Synthesis, Characterization, and Photocatalytic Evaluation of Manganese (III) Phthalocyanine Sensitized ZnWO4 (ZnWO4MnPc) for Bisphenol A Degradation under UV Irradiation

ZnWO₄MnPc was synthesized via a hydrothermal autoclave method with 1 wt.% manganese (iii) phthalocyanine content. The material was characterized for its structural and morphological features via X-ray diffraction (XRD) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, transmission emission microscopy (TEM), scanning electron microscopy-Energy dispersive X-ray spectroscopy (SEM-EDX), N₂ adsorption-desorption at 77K, X-ray photoelectron spectroscopy (XPS), and UV-visible/diffuse reflectance spectroscopy(UV-vis/DRS). ZnWO₄MnPc photocatalytic performance was tested on the degradation of bisphenol A (BPA). The ZnWO₄MnPc material removed 60% of BPA after 4 h of 365 nm UV irradiation. Degradation process improved significantly to about 80% removal in the presence of added 5 mM H₂O₂ after 4 h irradiation. Almost 100% removal was achieved after 30 min under 450 nm visible light irradiation in the presence of same concentration of H₂O₂. The effect of ions and humic acid (HA) towards BPA removal was also investigated.

Synthesis of ZnO@Ag dumbbells for highly efficient visible-light photocatalysts

The photocatalytic activity (PCA) of ZnO@Ag nanocomposites for different concentrations of Ag is reported. Dumbbells shaped zinc oxide (ZnO) nanostructures with silver (Ag) nanoparticles were synthesized by a simple chemical colloidal method. The as synthesized nanocomposites (without any heat treatment) were used for optical and photocatalytic studies. The FESEM analysis shows that the composite catalysts are composed of ZnO dumbbells coated with spherical Ag nanoparticles. UV-visible spectrum of ZnO@Ag photocatalysts shows a strong absorption band of ZnO at 380 nm with a plasmonic peak of Ag at 440 nm. The PL emission intensity of the composites varies with Ag concentration and has a minimum for the catalyst containing 13.7% of Ag. A possible growth mechanism of ZnO nanostructures with hexagonal cross-section has been proposed. Photocatalytic property of the as synthesized ZnO and ZnO@Ag catalysts was studied by investigating the degradation of methylene blue (MB) dye on exposure to UV-visible radiation. A relatively faster degradation of the dye was observed for ZnO@Ag composites as compared to pure ZnO, showing an improved photocatalytic behavior in the visible region. We proposed a possible mechanism for the enhancement in photocatalytic activity of Ag coated ZnO photocatalysts.

In Situ Charge Transfer at the Ag@ZnO Photoelectrochemical Interface toward the High Photocatalytic Performance of H2 Evolution and RhB Degradation

Designing an efficient hybrid structure photocatalyst for photocatalytic decomposition and hydrogen (H₂) evolution has been considered a great choice to develop renewable technologies for clean energy production and environmental remediation. Enhanced charge transfer (CT) based on the interaction between a noble metal and a semiconductor is a crucial factor influencing the movement of photogenerated electron-hole pairs. Herein, we focus on the recent advances related to plasmon-enhanced noble metals and the semiconductor nature to drive the photocatalytic H₂ production and photodegradation of the organic dye rhodamine B (RhB) under UV and visible light irradiation. Specifically, the combination of concerted catalysis and green nanoengineering strategies to design ZnO-based composite photocatalysts and their decoration with metallic Ag have been realized by the radio frequency (RF) sputtering technique at room temperature. This simultaneity enhances the interface coupling between Ag and ZnO and reduces the energy threshold. The creation of charge transfer in the heterojunction and Schottky barrier changes the photoelectronic properties of the as-synthesized Al-doped ZnO (AZO); afterward, these effects promote the migration, transportation, and separation of photoinduced charge carriers and enhance the light-harvesting efficiency. As a result, the as-synthesized AZO-20 hybrid nanostructure exhibits a photocurrent density of 2.5 mA/cm² vs Ag/AgCl, which is improved by almost 12 times compared with that of bare ZnO (0.2 mA/cm²). The hydrogen evolution rates of AZO-20 were ∼38 and ∼24 μmol/h under UV and visible light exposure, which are almost five- and tenfold higher than those of pristine ZnO, respectively. Additionally, the RhB degradation efficacies of the obtained AZO-20 were greater than almost 97 and 82% under UV and visible light illumination, respectively. The achieved apparent rate constant for the photocatalytic RhB decomposition was 0.014 min^-1, indicating that it is 14-fold than that in pristine ZnO (0.001 min^-1). Heterostructure AZO photocatalysts possess excellent practical stability in the water-splitting reaction and photocatalytic RhB decomposition, posing as promising candidates in practical works for pollution and energy challenges.

Effect of Dual-Cocatalyst Surface Modification on Photodegradation Activity, Pathway, and Mechanisms with Highly Efficient Ag/BaTiO3/MnOx

Cocatalyst surface-loading has been regarded as an effective strategy to promote solar-energy-conversion efficiency. However, the potential influence of surface modification with cocatalysts on the photodegradation pathway and the underlying mechanisms is still unclear. Herein, we have used ferroelectric BaTiO₃ as the substrate, and both the reduction cocatalyst Ag and the oxidation cocatalyst MnO_x have been successfully loaded onto BaTiO₃ simultaneously by a one-step photodeposition method as evidenced by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM). The influence of dual-cocatalyst surface-loading on photodegradation of rhodamine B has been systematically investigated for the first time. First, the dual-cocatalyst-modified BaTiO₃ outperformed over the single-cocatalyst-loaded BaTiO₃, and the photodegradation rate of Ag/BaTiO₃/MnO_x is about 3 times and 12 times as high as that of Ag/BaTiO₃ and BaTiO₃/MnO_x, respectively. The credit is given to the synergistic effect between the reduction and oxidation cocatalysts, prompting charge carrier separation and migration as verified by the transient photocurrent, electrochemical impedance, and photoluminescence (PL) spectrum investigation. Second, in addition to the boosted photodegradation activity, the photodegradation pathway is found to be altered as well when using Ag/BaTiO₃/MnO_x. High-performance liquid chromatography (HPLC) analysis indicated that a highly selective stepwise deethylation process predominates over chromophore cleavage in the Ag/BaTiO₃/MnO_x system, while it is reverse for the Ag/BaTiO₃ system. This phenomenon is attributed to the different dye molecule adsorption modes. Furthermore, the radical trapping experiment shows that holes play a major role in the degradation process, and the recycle test proves the excellent stability of Ag/BaTiO₃/MnO_x. Our findings may add another layer of understanding depth to cocatalyst surface modification in photodegradation applications.

Nanoengineering of Gold Nanoparticles: Green Synthesis, Characterization, and Applications

The fundamental aspects of the manufacturing of gold nanoparticles (AuNPs) are discussed in this review. In particular, attention is devoted to the development of a simple and versatile method for the preparation of these nanoparticles. Eco-friendly synthetic routes, such as wet chemistry and biosynthesis with the aid of polymers, are of particular interest. Polymers can act as reducing and/or capping agents, or as soft templates leading to hybrid nanomaterials. This methodology allows control of the synthesis and stability of nanomaterials with novel properties. Thus, this review focus on a fundamental study of AuNPs properties and different techniques to characterize them, e.g., Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), UV-Visible spectroscopy, Dynamic Light Scattering (DLS), X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy, Small-angle X-Ray Scattering (SAXS), and rheology. Recently, AuNPs obtained by “green” synthesis have been applied in catalysis, in medicine, and as antibacterials, sensors, among others.

Energy Band Architecture of a Hierarchical ZnO/Au/CuxO Nanoforest by Mimicking Natural Superhydrophobic Surfaces

The ZnO/Cu₂O heterojunction promises high efficiency in photocurrent conversion and other light-driven processes, but the lattice mismatch between ZnO and Cu₂O leads to slow electron transfer and low conversion efficiency. In addition, the stability of Cu₂O is still the main challenging and limiting factor for device applications in real environments. Cu_xO is a mixed semiconductor of CuO and Cu₂O, which is a promising alternative to Cu₂O in device fabrication due to its better stability and photocatalytic efficiency. In this work, Cu_xO nanorods were attached to vertically aligned gold-decorated ZnO nanorods, creating a hierarchical ZnO/Au/Cu_xO nanoforest. In addition, the hierarchical surface shows superhydrophobicity, which can prevent Cu₂O degradation by water and oxygen. Femtosecond time-resolved transient absorption spectroscopy was employed to investigate the electron transfer dynamics in the ZnO/Au/Cu_xO heterojunction. The nanoforest demonstrates enhanced electron mobility, increased lattice match, and higher photocurrent conversion efficiency compared with bare ZnO, Cu_xO, or ZnO/Cu_xO.

Dual Functional S-Doped g-C₃N₄ Pinhole Porous Nanosheets for Selective Fluorescence Sensing of Ag⁺ and Visible-Light Photocatalysis of Dyes

This study explores the facile, template-free synthesis of S-doped g-C₃N₄ pinhole nanosheets (SCNPNS) with porous structure for fluorescence sensing of Ag⁺ ions and visible-light photocatalysis of dyes. As-synthesized SCNPNS samples were characterized by various analytical tools such as XRD, FT-IR, TEM, BET, XPS, and UV⁻vis spectroscopy. At optimal conditions, the detection linear range for Ag⁺ was found to be from 0 to 1000 nM, showing the limit of detection (LOD) of 57 nM. The SCNPNS exhibited highly sensitive and selective detection of Ag⁺ due to a significant fluorescence quenching via photo-induced electron transfer through Ag⁺⁻SCNPNS complex. Moreover, the SCNPNS exhibited 90% degradation for cationic methylene blue (MB) dye within 180 min under visible light. The enhanced photocatalytic activity of the SCNPNS was attributed to its negative zeta potential for electrostatic interaction with cationic dyes, and the pinhole porous structure can provide more active sites which can induce faster transport of the charge carrier over the surface. Our SCNPNS is proposed as an environmental safety tool due to several advantages, such as low cost, facile preparation, selective recognition of Ag⁺ ions, and efficient photocatalytic degradation of cationic dyes under visible light.