Highly Stable Nb2O5–Al2O3 Composites Supported Pt Catalysts for Hydrodeoxygenation of Diphenyl Ether

A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency

Lignin is a promising alternative to traditional fossil resources for producing biofuels due to its aromaticity and renewability. Pyrolysis is an efficient technology to convert lignin to valuable chemicals, which is beneficial for improving lignin valorization. In this review, pyrolytic behaviors of various lignin were included, as well as the pyrolytic mechanism consisting of initial, primary, and charring stages were also introduced. Several parallel reactions, such as demethoxylation, demethylation, decarboxylation, and decarbonylation of lignin side chains to form light gases, major lignin structure decomposition to generate phenolic compounds, and polymerization of active lignin intermediates to yield char, can be observed through the whole pyrolysis process. Several parameters, such as pyrolytic temperature, time, lignin type, and functional groups (hydroxyl, methoxy), were also investigated to figure out their effects on lignin pyrolysis. On the other hand, zeolite-driven lignin catalytic pyrolysis and lignin co-pyrolysis with other hydrogen-rich co-feedings were also introduced for improving process efficiency to produce more aromatic hydrocarbons (AHs). During the pyrolysis process, phenolic compounds and/or AHs can be produced, showing promising applications in biochemical intermediates and biofuel additives. Finally, some challenges and future perspectives for lignin pyrolysis have been discussed.

More than a support: the unique role of Nb2O5 in supported metal catalysts for lignin hydrodeoxygenation

How does Nb2O5 in supported catalysts affect the hydrodeoxygenation of lignin? This article discusses the effects of Nb2O5 in detail, including the promotion of C–O bond cleavage, the improvement of water resistance and the enhancement of durability.

Bimetallic Niobium-Based Catalysts Supported on SBA-15 for Hydrodeoxygenation of Anisole

The effect of adding iron, cobalt or nickel to a prepared niobium-supported catalyst using mesoporous silica SBA-15 as a support was evaluated in the hydrodeoxygenation (HDO) reaction of anisole, chosen as a model compound in lignocellulosic biomass derived bio-oil. HDO activity as well as selectivity toward O-free products were highly dependent on the catalyst formulation: Ni incorporation showed the highest anisole conversion and selectivity to deoxygenated products, followed by Co and Fe counterparts. The activity was explained in terms of acidity, metal surface exposure and reducibility as a function of the interaction between the phases present. Regarding the characterization results, the better performance of NiNb/SBA-15 was associated with its lower acidity, higher Nb/Si surface exposure, NbO₂/Nb₂O₅ ratio and better interaction between Ni and Nb species.

Catalytic fast pyrolysis of enzymatic hydrolysis lignin over Lewis-acid catalyst niobium pentoxide and mechanism study

Lewis-acid catalyst Nb₂O₅ is first applied in catalytic fast pyrolysis (CFP) of enzymatic hydrolysis lignin (EHL) to produce aromatic hydrocarbons (AHs) that can be used as alternative liquid fuels. The catalyst exhibits a good talent to convert lignin into AHs with quite little polycyclic aromatic hydrocarbons (PAHs) formation. The yield of AHs reaches 11.2 wt% and monocyclic aromatic hydrocarbons (MAHs) takes up 94% under the optimized condition (Catalyst to Lignin ratio 9:1, 650 °C). No coke is generated during the reactions. The reaction sequence is proposed and verified by model compound reactions. Furthermore, DFT calculations are performed to understand the mechanisms of limitation of PAHs or char/coke formation and the efficient deoxygenation ability over catalyst. Nb₂O₅ with Lewis acid sites is proved to be a promising catalyst for the production of AHs from lignin. This work provides a new idea on choice of catalysts for CFP of lignin in future.

A review on high catalytic efficiency of solid acid catalysts for lignin valorization

It is imminent to develop renewable resources to replace fossil-derived energies as fossil resources are on the brink of exhaustion. Lignin is one of the major components of lignocellulosic biomass, which is a natural amorphous three-dimensional polymer with abundant C-O bonds and aromatic structure. Hence, valorization of lignin into high value-added liquid fuels and chemicals is regarded as a promising strategy to mitigate fossil resource shortages. Solid acid catalysts are extensively studied due to environmentally friendly in terms of the ease of separation, recovery and reduced amount of wastes. Hence, this review focuses on summarizing the recent progress of catalytic valorization of lignin over different kinds of solid acid catalysts including zeolites, heteropolyacids, metal oxides, amorphous SiO₂-Al₂O₃, metal phosphates, and Lewis acid. Based on reviewing of current progress of lignin conversion, the challenges and future prospects are emphasized.

Downstream processing of lignin derived feedstock into end products

This review provides critical analysis on various downstream processes to convert lignin derived feedstock into fuels, chemicals and materials.

Design of Nickel Supported on Water-Tolerant Nb2O5 Catalysts for the Hydrotreating of Lignin Streams Obtained from Lignin-First Biorefining

In biomass conversion, Nb2O5 has attracted increasing attention as a catalyst support presenting water-tolerant Lewis acid sites. Herein, we address the design of Ni/Nb2O5 catalysts for hydrotreating of lignin to hydrocarbons. To optimize the balance between acidic and hydrogenating properties, the catalysts were first evaluated in the hydrotreating of diphenyl ether. The best catalyst candidate was further explored in the conversion of lignin oil obtained by catalytic upstream biorefining of poplar. As primary products, cycloalkanes were obtained, demonstrating the potential of Ni/Nb2O5 catalysts for the lignin-to-fuels route. However, the Lewis acidity of Nb2O5 also catalyzes coke formation via lignin species condensation. Thereby, an acidity threshold should be found so that dehydration reactions essential to the hydrotreatment are not affected, but the condensation of lignin species prevented. This article provides a critical "beginning-to-end" analysis of aspects crucial to the catalyst design to produce lignin biofuels.

Advances in porous and nanoscale catalysts for viable biomass conversion

Solid catalysts with unique porosity and nanoscale properties play a promising role for efficient valorization of biomass into sustainable advanced fuels and chemicals.