Fluorescent Sensor for Sequentially Monitoring Zinc(II) and Cyanide Anion in Near-Perfect Aqueous Media

Dual channel chemosensor for successive detection of environmentally toxic Pd2+ and CN- ions and its application to cancer cell imaging

BACKGROUND

Detecting and neutralizing Pd2+ ions are a significant challenge due to their cytotoxicity, even at low concentrations. To address this issue, various chemosensors have been designed for advanced detection systems, offering simplicity and the potential to differentiate signals from different analytes. Nonetheless, these chemosensors often suffer from limited emission response and complex synthesis procedures. As a result, the tracking and quantification of residual palladium in biological systems and environments remain challenging tasks, with only a few chemosensing probes available for commercial use.

RESULTS

In this paper, a straightforward approach for the selective detection of Pd2+ ions is proposed, which involves the design, synthesis, and utilization of a propargylated naphthalene-derived probe (E)-N'-((2-(prop-2-yn-1-yloxy)naphthalen-1-yl)methylene)benzohydrazide (NHP). The NHP probe exhibits sensitive dual-channel colorimetry and fluorescence Pd2+ detection over other tested metal ions. The detection process is performed through a catalytic depropargylation reaction, followed by an excited state intramolecular proton transfer (ESIPT) process, the detection limit is as low as 11.58 × 10-7 M under mild conditions. Interestingly, the resultant chemodosimeter adduct (E)-N'-((2-hydroxynaphthalen-1-yl)methylene)benzohydrazide (NHH) was employed for the consecutive detection of CN- ions, exhibiting an impressive detection limit of 31.79 × 10-8 M. Validation of both detection processes was achieved through 1H nuclear magnetic resonance and density functional theory calculations. For real-time applications of the NHP and NHH probes, smartphone-assisted detection, and intracellular detection of Pd2+ and CN- ions within HeLa cells were studied.

SIGNIFICANCE

This research presents a novel naphthalene derivative for visually detecting environmentally toxic Pd2+ and CN- ions. The synthesized probe selectively binds to Pd2+, forming a chemodosimeter. It successfully detects CN- ions through colorimetry and fluorimetry, offering a low detection limit and quick response. Notably, it's the first naphthalene-based small molecule to serve as a dual probe for toxic analytes - palladium and cyanide. Moreover, it effectively detects Pd2+ and CN- intracellularly in cancer cells.

A pyrene-induced PET-based chemosensor for biologically important Zn(II) ions: application in test strips and live cell imaging studies

Cation and anion sensing is vital owing to their universal dispersion in ecosystems and biological functions. It has been shown that fluorescent receptors based on organic platforms are efficient for detecting a number of ions and have many advantages such as low cost, superior sensitivity and simplicity in installation. This study demonstrates the design and synthesis of a novel receptor (E)-3-[(3,5-di-tert-butyl-2-hydroxybenzylidene)amino]-2-(pyren-1-yl)-2,3-dihydroquinazolin-4(1H)-one (DTQ) for the rapid recognition of Zn(II) ions. DTQ exhibited a significant fluorometric "turn-on" characteristic towards Zn(II) at λmax 444 nm in aqueous acetonitrile by inhibiting the photo-induced electron transfer (PET) and -CN- process. The ESI-MS analysis and Job's plot experimental results confirmed stoichiometric 1 : 1 complex formation between DTQ and Zn(II). Fluorometric investigations revealed the detection limit and association constant of DTQ towards Zn(II), which were found to be 13.4 nM and 1.47 × 105 M-1, respectively. DTQ was employed to sense Zn(II) on low-cost test strips. The present research findings imply that DTQ can function as an effective sensor for Zn(II).

Ratiometric orange fluorescent and colorimetric highly sensitive imidazolium-bearing naphthoquinolinedione-based probes for CN- sensing in aqueous solutions and bio-samples

The widespread use of cyanide (CN^-) in industry results in contamination of various effluents such as drain, lake, and tap water, an imminent danger to the environment and human health. We prepared naphthoquinolinedione (cyclized; 1-5) and anthracenedione (un-cyclized) probes (6-7) for selective detection of CN^-. The addition of CN^- to the probe solutions (1-5) resulted in a color change from pale green to orange under 365 nm illumination. The nucleophilic addition of CN^- to C2 of the imidazolium ring of the probes is responsible for selective CN^- detection. Among all probes, 1 gave the lowest fluorescence-based LOD of 0.13 pM. In contrast, the un-cyclized probes (6 and 7) were substantially inferior to the cyclized counterparts (1 and 2, respectively) for detecting a trace amount of CN^-. The notably low LOD displayed by probe 1 was maintained in the detection of CN^- in real food samples, human fluids, and human brain cells. This is the first report studying imidazolium-bearing naphthoquinolinedione-based probes for CN^- sensing in 100% water.

Synthesis of Bis-tetraphenylethene as a Novel Turn-On Selective Zinc Sensor

The main purpose of this study is the synthesis of novel fluorescent Bis-TPE and the investigation of its wide range of photochemical behaviors. For this purpose, initially, Bis-TPE was synthesized. Following this, the interactions of Bis-TPE with a wide range of ions were studied in EtOH using ultraviolet-visible (UV-vis) and fluorescence spectroscopy. As a result of all UV-vis and fluorescence studies, it was determined that Bis-TPE showed turn-on sensor features against Zn²⁺ ions. Moreover, the limit of detection (LOD) and K_a values of Bis-TPE/Zn²⁺ were calculated as 0.97 μM (970 nM) and 3.76 × 10⁵ M^-1, respectively. Moreover, all reversal studies resulted in switchable on/off variation of the alternative addition of ZnCl₂ and [Bu₄N]OH to Bis-TPE. This result also implies that the probe Bis-TPE also exhibits specific OH^- sensor properties in the presence of zinc.

Single Organic Ligands Act as a Bifunctional Sensor for Subsequent Detection of Metal and Cyanide Ions, a Statistical Approach toward Coordination and Sensitivity

The detection of key ions in environmental samples has garnered significant attention in recent years in the pursuit of a cleaner environment for living organisms. Bifunctional and multifunctional sensors, as opposed to single-species sensors, have emerged as a rapidly developing field. Many reports in the literature have documented the use of bifunctional sensors for the subsequent detection of metal and cyanide ions. These sensors, consisting of simple organic ligands, form coordination compounds with transition metal ions, resulting in clear visible or fluorescent changes that facilitate detection. In some cases, a single polymeric material can act as a ligand and coordinate with metal ions, forming a complex that serves as a sensor for cyanide ion detection in biological and environmental samples through various mechanisms. Nitrogen is the most dominant coordinating site in these bifunctional sensors, with the sensitivity of the sensors being directly proportional to the denticities of ligands for metal ions, while for cyanide ions the sensitivity was found independent of the denticity of the ligands. This review covers the progress made in the field over the past fifteen years (2007-2022), with most ligands detecting copper (II) and cyanide ions, but with the capability to detect other metals such as iron, mercury, and cobalt as well.

Recent Development in Coordination Compounds as a Sensor for Cyanide Ions in Biological and Environmental Segments

Rapid detection of toxic ions has taken great attention in the last few decades due to its importance in maintaining a greener environment for human beings. The extreme toxicity of cyanide (CN-) ions is a great environmental concern as its continued industrial use generates interest in facile and sensitive methods for CN- ions detection. Since CN- ions act as a ligand in coordination chemistry which rapidly coordinates with suitable metals and forms complexes, this ability was mainly explored in its detection. It also attacks the central metal in coordination compounds and gives a fluorimetric response. Coordination compounds behave as a sensor for the detection of important ions like CN- ions and have gained great attention due to their facile synthesis, multianalyte detection, clear detection and low detection limit. Recently, considerable efforts have been devoted to the detection and quantification of hazardous multianalyte using a single probe. Cu2+ complexes are the main complexes used for CN- ions detection; however, the complexes of many other metals are also used as sensors. Four basic types of interaction have been discussed in coordination compound sensors for CN- detection. The performances of different sensors are compared with one another and the sensors which have the lowest detection limit are highlighted. This review comprises the progress made by coordination compounds as sensors for the detection of CN- ions in the last six years (2015-2021). To the best of our knowledge, there is no review on coordination compounds as a sensor for CN- ions during this period. [Figure: see text].

A cuvette-compatible Zn2+sensing tool for conventional spectrofluorometers prepared by copolymerization of macrocyclic fluoroionophores on quartz glass surface

We report here the development of a surface-modified quartz glass sheet, which affords an opportunity for converting conventional spectrofluorometers to ion-selective optochemical sensors by placing it diagonally into a photometric cuvette. Moreover, we describe a generalizable technique, which allows the usage of any polymerizable ionophores for developing multiple-use fluorescent chemosensors of various selectivity. A fluorescent bis(acridino)-crown ether containing allyl groups was photocatalytically copolymerized with a methacrylate-acrylamide-based monomer mixture to obtain an ion-selective sensor membrane layer on the surface of the cuvette-compatible glass sheet. This glass membrane-based direct optode enabled the analysis of Zn²⁺above a lower limit of detection of 2.2×10^-7mol·L^-1with an excellent reusability. Limiting factors, like pH and competing ionic or organic agents were thoroughly investigated. Moreover, spiked river-water samples were measured to demonstrate applicability. The proposed sensor placed in any conventional spectrofluorometer provides an innovative method for perturbation-free analysis of Zn²⁺for all the chemists in need of a fast, easy-to-use, portable and regenerable analyzer without the requirement of an analyte-specific instrumentation.

A multifunctional basic pH indicator probe for distinguishable detection of Co2+, Cu2+ and Zn2+ with its utility in mitotracking and monitoring cytoplasmic viscosity in apoptotic cells

Metal ions such as Co²⁺, Cu²⁺ and Zn²⁺ have extensive applications in biological and industrial realms, but the toxicity caused by these ions poses a serious threat to mankind. However, there is no report in the literature on the development of a chemosensor for distinguishable detection of these toxic ions. Addressing this challenge, a multifunctional probe as a basic pH indicator with both colorimetric and fluorescence turn-on responses has been reported. The probe selectively discriminates Co²⁺, Cu²⁺ and Zn²⁺ ions with brown, dark yellow and greenish yellow colors, respectively, in DMF : water (9 : 1 v/v, HEPES 10 mM). Additionally, a fluorescence turn-on response specific to Zn²⁺ has also been observed. The sensing mechanism has been explored using UV-Vis, fluorescence spectroscopy and ¹H NMR titration and confirmed with computational results. The inhibition of CN isomerization and excited state intramolecular proton transfer (ESIPT) along with chelation enhanced fluorescence emission (CHEF) result in fluorescence enhancement with Zn²⁺. Job's plot and HRMS spectra confirm a 1 : 1 (L : M) stoichiometry between the probe and metal ions. The probe is able to exhibit excellent viscochromism in DMF : glycerol medium. Live cell imaging on SiHa cells has been successfully performed for intra-cellular detection of Zn²⁺ at basic pH. Furthermore, the probe displays its utility in mitotracking and monitoring cytoplasmic viscosity changes in SiHa cells. It is efficiently used to recognize the apoptosis process by displaying an enhancement in fluorescence intensity from cancerous SiHa cells to apoptotic cells.

Unveiling of a smartphone-mediated ratiometric chemosensor towards the nanomolar level detection of lethal CN-: combined experimental and theoretical validation with the proposition of a molecular logic circuitry

A promising naphthalene-functionalized ratiometric chemosensor (E)-1-((naphthalen-5-yl) methylene)-2-(2,4-dinitrophenyl) hydrazine (DNMH) is unveiled in the present work. DNMH demonstrates brisk discernible colorimetric response from yellow to red in the presence of CN⁻, a lethal environmental contaminant, in a near-perfect aqueous medium with a LOD of 278 nM. The “key role marker” controlling the electrochemical and non-covalent H-bonding interaction between DNMH and CN⁻ is through the commendable role of acidic –NH functionalities. Kinetic studies reveal a pseudo second order reaction rate and the formation of an unprecedented photostable adduct. The negative value of ΔG as evaluated from ITC substantiates the spontaneity of the DNMH⋯CN⁻ interaction. The sensing mechanism was further reinforced with state-of-the-art theoretical investigations, namely DFT, TDDFT and Fukui indices (FIs). Moreover, the proposition of a reversible multi-component logic circuitry implementing Boolean functions in molecular electronics has also been triggered by the turn-over spectrophotometric response of the ditopic ions CN⁻ and Cd²⁺. The cytotoxicity of DNMH towards Bacillus thuringiensis and Escherichia coli is successfully investigated via the MTT assay. Impressively, “dip stick” and “easy to prepare” test paper device and silica gel-based solid-phase CN⁻ recognition validate the on-site analytical application of DNMH. Furthermore, the involvement of a synergistic approach between ‘chemistry beyond the molecule’ and ‘engineering’ via an exquisitely implemented smartphone-assisted colorimetric sensory prototype makes this work unprecedented among its congeners and introduces a new frontier in multitudinous material-based functional product development.

A ratiometric chemosensor (DNMH) is unveiled herein, demonstrating selective chromogenic response towards CN⁻, with a LOD of 278 nM. Consequently, molecular logic circuitry and a smartphone-based colorimetric sensory prototype has been explored.

A Novel L-Shaped Fluorescent Probe for AIE Sensing of Zinc (II) Ion by a DR/NIR Response

In the field of optical sensors, small molecules responsive to metal cations are of current interest. Probes displaying aggregation-induced emission (AIE) can solve the problems due to the aggregation-caused quenching (ACQ) molecules, scarcely emissive as aggregates in aqueous media and in tissues. The addition of a metal cation to an AIE ligand dissolved in solution can cause a "turn-on" of the fluorescence emission. Half-cruciform-shaped molecules can be a winning strategy to build specific AIE probes. Herein, we report the synthesis and characterization of a novel L-shaped fluorophore containing a benzofuran core condensed with 3-hydroxy-2-naphthaldehyde crossed with a nitrobenzene moiety. The novel AIE probe produces a fast colorimetric and fluorescence response toward zinc (II) in both in neutral and basic conditions. Acting as a tridentate ligand, it produces a complex with enhanced and red-shifted emission in the DR/NIR spectral range. The AIE nature of both compounds was examined on the basis of X-ray crystallography and DFT analysis.

Acridino-Diaza-20-Crown-6 Ethers: New Macrocyclic Hosts for Optochemical Metal Ion Sensing

Acridino-diaza-20-crown-6 ether derivatives as new turn-on type fluorescent chemosensors with an excellent functionality and photophysical properties have been designed and synthesized for metal ion-selective optochemical sensing applications. Spectroscopic studies revealed that in an acetonitrile-based semi-aqueous medium, the sensor molecules exhibited a remarkable fluorescence enhancement with high sensitivity only toward Zn2+, Al3+ and Bi3+, among 23 different metal ions. Studies on complexation showed a great coordinating ability of logK > 4.7 with a 1:1 complex stoichiometry in each case. The detection limits were found to be from 59 nM to micromoles. The new ionophores enabled an optical response without being affected either by the pH in the range of 5.5-7.5, or the presence of various anions or competing metal ions. Varying the N-substituents of the new host-backbone provides diverse opportunities in both immobilization and practical applications without influencing the molecular recognition abilities.

Keteniminium Salts: Reactivity and Propensity toward Electrocyclization Reactions

A predictive computational study was conducted in order to assess the efficiency of electrocyclization reactions of keteniminium salts, in an effort to form a variety of heterocyclic systems, namely, 3-amino(benzo)thiophenes, 3-amino(benzo)furans, 3-aminopyrroles, as well as 3-aminoindoles. A density functional theory (DFT) approach was utilized and the effect of heteroatoms (NMe, O, S) was thoroughly investigated by means of population analysis, QTAIM, NICS, ACID, and local reactivity descriptors (Parr and Fukui functions). The electrocyclization of enamines leading to 3-aminopyrroles was shown to be both kinetically and thermodynamically most favorable. Moreover, the pericyclic nature of the electrocyclizations was confirmed using FMO, QTAIM, NICS, and ACID methods. Additionally, substituent effects were investigated in order to give further insight on the reactivity of heteroatom containing keteniminium systems toward electrocyclization reactions. Finally, computational predictions were experimentally confirmed for a selection of keteniminium systems.

An efficient water-soluble fluorescent chemosensor based on furan Schiff base functionalized PEG for the sensitive detection of Al3+ in pure aqueous solution

An efficient reversible fluorescent chemosensor, PEGFB, based on polyethylene glycol bearing a furan Schiff base unit has been successfully developed to sensitively detect Al³⁺ in pure aqueous solution.

Dual recognition of Al3+ and Zn2+ ions by a novel probe based on diarylethene and its application

We synthesized a new fluorescent probe 1O by attaching a diarylethene molecule to a functional group. The probe can be used to detect Al3+ and Zn2+ at the same time with high selectivity, and its detection limit is very low. When Al3+ was added, the fluorescence intensity was increased 310 folds, and was accompanied by a fluorescent color change from black to grass-green. Similarly, after the addition of Zn2+, the fluorescence intensity was enhanced 110 folds, with a concomitant color change from black to yellow-green. Moreover, based on the properties of 1O, we designed a logic circuit, and that also can be used for water sample testing.

A simple Schiff base as dual-responsive fluorescent sensor for bioimaging recognition of Zn2+ and Al3+ in living cells

A simple Schiff base fluorescent sensor (BDNOL) was synthesized from the reaction of picolinohydrazide and 4-(diethylamino)salicylaldehyde, and developed for selective detection of Al³⁺ and Zn²⁺. This non-fluorescent sensor displayed obvious fluorescence enhancement after binding to Al³⁺/Zn²⁺ ions with high sensitivity and selectivity, accompanied by obvious fluorescence emission enhancement (504 nm for Al³⁺ and 575 nm for Zn²⁺). The detection limits were found to be 8.30 × 10^-8 M for Al³⁺ and 1.24 × 10^-7 M for Zn²⁺. The binding mechanisms between BDNOL and Al³⁺/Zn²⁺ ions were supported by ¹H NMR and HR-MS analysis, and a density functional theory (DFT) study. The sensing behavior was also studied with molecular logic functions of OR, AND, and NOT gates. Furthermore, the fluorescent sensor was successfully used to recognize Al³⁺ and Zn²⁺ in living cells, suggesting that this simple biosensor has great potential in biological imaging applications.

Highly selective and sensitive chemosensor based on 2,3-diaminophenazine hydrochloride for the detection of cyanide in pure water and its application in plant seed samples

A 2,3-diaminophenazine hydrochloride (Q1) shows a ultrasensitive visible and fluorescence response for cyanide in pure water via hydrogen bonding.