Direct Surface Growth Of UIO-66-NH2 on Polyacrylonitrile Nanofibers for Efficient Toxic Chemical Removal

Enhanced ozonation of vanillin catalyzed by highly efficient magnetic MnFe2O4/ZIF-67 catalysts: Synergistic effects and mechanism insights

In this study, we synthesized magnetic MnFe2O4/ZIF-67 composite catalysts using a straightforward method, yielding catalysts that exhibited outstanding performance in catalyzing the ozonation of vanillin. This exceptional catalytic efficiency arose from the synergistic interplay between MnFe2O4 and ZIF-67. Comprehensive characterization via x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), Fourier transform infrared spectrometer (FT-IR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM), and energy dispersive spectroscopy (EDS) confirmed that the incorporation of MnFe2O4 promoted the creation of oxygen vacancies, resulting in an increased presence of l adsorbed oxygen (Oads) and the generation of additional ·OH groups on the catalyst surface. Utilizing ZIF-67 as the carrier markedly enhanced the specific surface area of the catalyst, augmenting the exposure of active sites, thus improving the degradation efficiency and reducing the energy consumption. The effects of different experimental parameters (catalyst type, initial vanillin concentration, ozone dosage, initial pH value, and catalyst dosage) were also investigated, and the optimal experimental parameters (300 mg/L1.0-MnFe2O4/ZIF-67, vanillin concentration = 250 mg/L, O3 concentration = 12 mg/min, pH = 7) were obtained. The vanillin removal efficiency of MnFe2O4/ZIF-67 was increased from 74.95% to 99.54% after 30 min of reaction, and the magnetic separation of MnFe2O4/ZIF-67 was easy to be recycled and stable, and the vanillin removal efficiency of MnFe2O4/ZIF-67 was only decreased by about 8.92% after 5 cycles. Additionally, we delved into the synergistic effects and catalytic mechanism of the catalysts through kinetic fitting, reactive oxygen quenching experiments, and electron transfer analysis. This multifaceted approach provides a comprehensive understanding of the enhanced ozonation process catalyzed by MnFe2O4/ZIF-67 composite catalysts, shedding light on their potential applications in advanced oxidation processes. PRACTITIONER POINTS: A stable and recyclable magnetic composite MnFe2O4/ZIF-67 catalyst was synthesized through a simple method. The synergistic effect and catalytic mechanism of the MnFe2O4/ZIF-67 catalyst were comprehensively analyzed and discussed. A kinetic model for the catalytic ozone oxidation of vanillin was introduced, providing valuable insights into the reaction dynamics.

Fibrous Zr-MOF Nanozyme Aerogels with Macro-Nanoporous Structure for Enhanced Catalytic Hydrolysis of Organophosphate Toxins

Metal-organic frameworks (MOFs) with Lewis acid catalytic sites, such as zirconium-based MOFs (Zr-MOFs), comprise a growing class of phosphatase-like nanozymes that can degrade toxic organophosphate pesticides and nerve agents. Rationally engineering and shaping MOFs from as-synthesized powders into hierarchically porous monoliths is essential for their use in emerging applications, such as filters for air and water purification and personal protection gear. However, several challenges still limit the production of practical MOF composites, including the need for sophisticated reaction conditions, low MOF catalyst loadings in the resulting composites, and poor accessibility to MOF-based active sites. To overcome these limitations, a rapid synthesis method is developed to introduce Zr-MOF nanozyme coating into cellulose nanofibers, resulting in the formation of processable monolithic aerogel composites with high MOF loadings. These composites contain Zr-MOF nanozymes embedded in the structure, and hierarchical macro-micro porosity enables excellent accessibility to catalytic active sites. This multifaceted rational design strategy, including the selection of a MOF with many catalytic sites, fine-tuning the coating morphology, and the fabrication of a hierarchically structured monolithic aerogel, renders synergistic effects toward the efficient continuous hydrolytic detoxification of organophosphorus-based nerve agent simulants and pesticides from contaminated water.

Growth of bimetallic Ni-Co MOFs on a skeleton of electrospun PAN nanofibers and coating on a thin film for SPME of amitriptyline and nortriptyline in urine and plasma samples

In this research, composited bimetallic organic framework-polyacrylonitrile (Ni-Co MOFs-PAN) was applied for thin-film solid phase microextraction (TF-SPME) of tricyclic antidepressant (TCA) drugs from biological samples. The separation and quantification of the analytes were accomplished by HPLC-UV. First, seeded nanofibers with organic ligands were electrospun on a sheet of foil. Then, with the uniform in-situ solvothermal growth of Ni-Co MOFs on the skeletal surface of nanofibers, the nanoparticles were successfully attached to the surfaces without effective bonds and produced a thin layer with a high flexibility, large active surface and abundant functional groups for adsorption. The characteristics of the produced nanocomposite were investigated by Fourier-transform infrared spectroscopy, field emission-scanning electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy and Brunauer-Emmett-Teller analysis. The stirring rate, pH, ionic strength, adsorption and desorption time along with type and volume of desorption solvents as influential factors on extraction efficiencies of the analytes, were optimized by one variable at a time method. Under optimized conditions, wide linear range for analytes in water and plasma matrices were obtained from 0.2 to 1000.0 μg L-1 and 1.0-1000.0 μg L-1, respectively, with R2 ≥ 0.9925. The limits of detection were in the range of 0.06-0.3 μg L-1 in different media. Good repeatability and reproducibility were attained within intra-day, inter-day and film-to-film RSDs% (n = 3) below 3.3 %, 3.9 % and 4.7 %, respectively. Since desirable relative recoveries were calculated between 91.4 % and 100.4 %. The method can be used for the successful extraction and measurement of amitriptyline and nortriptyline as its metabolite in different sampling time from urine and plasma matrices.

Research progress of MOFs/carbon nanocomposites on promoting ORR in microbial fuel cell cathodes

With the rapid development of the economy, energy demand is more urgent. Microbial fuel cells (MFCs) have the advantages of non-toxic, safety, and environmental protection, and are considered the ideal choice for the next generation of energy storage equipment. However, the slow kinetics of oxygen reduction reaction (ORR) on MFC air cathodes and the high cost of traditional platinum (Pt) catalysts hinder their practical application, so there is a need to develop efficient, low-cost, and stable electrocatalysts as alternatives. Recently, metal-organic framework (MOFs) has attracted wide attention in electrocatalysis. Electrocatalysts prepared by the nanocomposite of MOFs and carbon nanomaterials have multiple advantages, such as adjustable chemical properties, high specific surface area, and good electrical conductivity, which have been proven to be a promising electrocatalytic material. In this paper, the latest research progress of metal-organic frames (MOFs) and carbon nanocomposites is reviewed, and the preparation methods and modification of MOFs and carbon nanofibers, carbon nanotubes, and graphene composites are introduced, respectively, as well as their applications in MFC cathode. Finally, the main prospects of MOFs/carbon nanocomposite catalysts are put forward.

Self-Powered Infrared Photodetectors with Ultra-High Speed and Detectivity Based on Amorphous Cu-Based MOF Films

Amorphous metal-organic frameworks (aMOFs) start to challenge their crystalline equivalents due to their unique advantages, like lack of grain boundaries, isotropy, flexibility, numerous defects-induced active sites, etc. However, aMOFs are typically synthesized under rigorous conditions, and their properties and applications need to be further explored. In this work, highly transparent p-type amorphous Cu-HHTP films consisting of Cu²⁺ and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) were synthesized using a simple electrostatic spinning method and identified as p-a-Cu-HHTP. Besides, a p-a-Cu-HHTP/n-Si infrared photodetector (PD) operating on a self-powered basis with ultra-high speed (response time of 40 μs) and detectivity (1.2 × 10¹² Jones) has been developed, with a response time and detectivity that are record values for a MOF-based photodetector. In particular, the p-a-Cu-HHTP/n-Si PD can withstand high temperatures up to 180 °C without property change. Moreover, a flexible metal-semiconductor-metal photodetector based on p-a-Cu-HHTP is constructed, which shows excellent mechanical stability and photoresponse that remain unchanged after bending 120 times, implying its suitability for wearable optoelectronics. The new method to fabricate aMOFs, the unique p-a-Cu-HHTP, and its PDs initiated in this work opens up a new avenue in organic-inorganic hybrid optoelectronics.

Toxin-Blocking Textiles: Rapid, Benign, Roll-to-Roll Production of Robust MOF-Fabric Composites for Organophosphate Separation and Hydrolysis

Current approaches to create zirconium-based metal-organic framework (MOF) fabric composites for catalysis, water purification, wound healing, gas sorption, and other applications often rely on toxic solvents, long reaction/post processing times, and batch methods hindering process scalability. Here, a novel mechanism was reported for rapid UiO-66-NH₂ synthesis in common low-boiling-point solvents (water, ethanol, and acetic acid) and revealed acid-base chemistry promoting full linker dissolution and vapor-based crystallization. The mechanism enabled scalable roll-to-roll production of mechanically resilient UiO-66-NH₂ fabrics with superior chemical protective capability. Solvent choice and segregated spray delivery of organic linker and metal salt MOF precursor solutions allowed for rapid MOF nucleation on the fiber surface and decreased the energy and time needed for post-processing, producing an activated composite in less than 165 min, far outpacing conventional MOF-fabric synthesis approaches. The MOF-fabric hydrolyzed and blocked permeation of the chemical warfare agent soman, outperforming the protection-standard activated carbon cloth. This work presents both chemical insights into Zr-MOF powder and fabric composite formation by a rapid, industrially relevant approach and demonstrates its practicality and affordability for high-performing personal protective equipment.

Rational Design of a Zr-MOF@Curli-Polyelectrolyte Hybrid Membrane toward Efficient Chemical Protection, Moisture Permeation, and Catalytic Detoxification

Developing high-performance protective materials is important for soldiers and civilians who are exposed to the atmosphere of highly toxic chemical warfare agents (CWAs). Polyelectrolyte membranes are promising candidates with excellent chemical resistance and moisture permeability, but they cannot efficiently degrade CWAs. Here, we design and prepare a hybrid membrane through in situ growth of catalytically active zirconium-based metal-organic frameworks (Zr-MOFs) on a polyelectrolyte membrane mediated by biofilm-inspired curli nanofibers (CNFs). Superior to the bare polyelectrolyte membrane, the prepared MOF-808@CNF-PQ hybrid membrane exhibits improved rejection of the nerve agent simulant dimethyl methyl phosphonate (DMMP) vapor and permeation of the water vapor by 113 and 45%, respectively. The water/DMMP selectivity of the hybrid membrane reaches 498.6, approximately 13 times that of the commercial polyelectrolyte membrane Nafion 117. In addition, the hybrid membrane possesses appreciable catalytic activity for the hydrolysis of the nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP) with a half-life of ∼38 min. Nanomechanical characterization results based on atomic force microscopy (AFM) techniques demonstrate the critical role of CNFs in mediating Zr-MOF nucleation and the dominant effect of electrostatic interactions on self-assembly of CNFs on polyelectrolyte base. It is also confirmed that the Zr-MOF toppings serve as the key components in physically adsorbing and chemically degrading the DMNP molecules through multiple strong intermolecular interactions. Our work offers a rational strategy to develop advanced membranes toward efficient chemical protection, moisture permeation, and catalytic detoxification against CWAs.

Efficient electro-catalyzed PMS activation on a Fe-ZIF-8 based BTNAs/Ti anode: An in-depth investigation on anodic catalytic behavior

Phenanthrene (PHE), mainly released from coal tar and petroleum distillation, is an important kind of prevalent polycyclic aromatic hydrocarbons (PAHs) contamination in China (up to 2.38 ± 0.02 mg/kg in soil and 8668 ng/L in surface water) and other countries in the world. Metal-organic frameworks (MOFs) show promising application prospects in the decontamination field, however, suffering from the intrinsic fragility and fine powder forms. Therefore, macroscopic MOFs architecture-sandwich-like Fe-ZIF-8/blue TiO₂ nanotube arrays (BTNAs)/Ti substrate (FBTT) anode with strong interfacial bonding (Fe-O-Ti and Fe-2-MIM-Ti coordination) was constructed using innovative in situ growth, condensation-crystallization-deposition, and pyrolysis methods, aiming at exploring the feasibility of MOFs-based anode/peroxymonosulfate (PMS) mediated PHE elimination, revealing the in-depth mechanisms, simultaneously overcoming the intrinsic drawbacks of MOFs. The FBTT-4 (doping content of 30 %) efficiently degraded PHE by 90.01 % and 74.5 % within 10 min at 350 μg/L and 3 mg/L, respectively, mediated by the ^·OH compared to the SO₄^·-, ¹O₂, and O₂^·-. Post-optimized range of anodic potential enabled (i) anodic oxidation, (ii) activation of water and PMS molecules to produce active species, (iii) capture of electrons in reactants to reduce Fe³⁺/Ti⁴⁺ to Fe²⁺/Ti³⁺, maintaining the proportion of Fe/Ti with low valence and thus stable PMS activation capacity, and (iv) regulation of the Fe/Ti d-band center to modulate the anode adsorption capacity. The further increment in anodic potential could promote "dark photocatalysis" with a Z-scheme-like mechanism. Thus, it is proposed that the development of macroscopic MOFs-based anode, especially those with small band gaps, represents vast potentials in electrocatalytic contamination elimination. Simultaneously, the MOFs-based anode is expected to fully exploit their catalytic capacities and solve their intrinsic defects as well.

Surface, Interface and Structure Optimization of Metal-Organic Frameworks: Towards Efficient Resourceful Conversion of Industrial Waste Gases

Industrial waste gas emissions from fossil fuel over-exploitation have aroused great attention in modern society. Recently, metal-organic frameworks (MOFs) have been developed in the capture and catalytic conversion of industrial exhaust gases such as SO₂ , H₂ S, NO_x , CO₂ , CO, etc. Based on these resourceful conversion applications, in this review, we summarize the crucial role of the surface, interface, and structure optimization of MOFs for performance enhancement. The main points include (1) adsorption enhancement of target molecules by surface functional modification, (2) promotion of catalytic reaction kinetics through enhanced coupling in interfaces, and (3) adaptive matching of guest molecules by structural and pore size modulation. We expect that this review will provide valuable references and illumination for the design and development of MOF and related materials with excellent exhaust gas treatment performance.

Environmentally Benign Biosynthesis of Hierarchical MOF/Bacterial Cellulose Composite Sponge for Nerve Agent Protection

The fabrication of MOF polymer composite materials enables the practical applications of MOF-based technology, in particular for protective suits and masks. However, traditional production methods typically require organic solvent for processing which leads to environmental pollution, low-loading efficiency, poor accessibility, and loss of functionality due to poor solvent resistance properties. For the first time, we have developed a microbial synthesis strategy to prepare a MOF/bacterial cellulose nanofiber composite sponge. The prepared sponge exhibited a hierarchically porous structure, high MOF loading (up to ≈90 %), good solvent resistance, and high catalytic activity for the liquid- and solid-state hydrolysis of nerve agent simulants. Moreover, the MOF/ bacterial cellulose composite sponge reported here showed a nearly 8-fold enhancement in the protection against an ultra-toxic nerve agent (GD) in permeability studies as compared to a commercialized adsorptive carbon cloth. The results shown here present an essential step toward the practical application of MOF-based protective gear against nerve agents.

Macroscopic MOF Architectures: Effective Strategies for Practical Application in Water Treatment

Metal-organic frameworks (MOFs) have potential applications in removing pollutants such as heavy metals, oils, and toxins from water. However, due to the intrinsic fragility of MOFs and their fine powder form, there are still technical barriers to their practical application such as blockage of pipes, difficulty in recovery, and potential environmental toxicity. Therefore, attention has focused on approaches to convert nanocrystalline MOFs into macroscopic materials to overcome these limitations. Recently, strategies for shaping MOFs into beads (0D), nanofibers (1D), membranes (2D), and gels/sponges (3D) with macrostructures are developed including direct mixing, in situ growth, or deposition of MOFs with polymers, cotton, foams or other porous substrates. In this review, successful strategies for the fabrication of macroscopic materials from MOFs and their applications in removing pollutants from water including adsorption, separation, and advanced oxidation processes, are discussed. The relationship between the macroscopic performance and the microstructure of materials, and how the range of 0D to 3D macroscopic materials can be used for water treatment are also outlined.

Electrospun metal-organic frameworks hybrid nanofiber membrane for efficient removal of As(III) and As(V) from water

Metal-organic frameworks (MOFs) have been widely applied for pollutants removal in water. However, the powdered MOFs are always suffered from aggregation during use and difficult collection after use. These problems discount their efficiency and inhibit their reusability. In this work, Zr-based MOF (UiO-66) was successfully imprisoned into a water-stable polyacrylonitrile (PAN) substrate by electrospinning. The containing UiO-66 hybrid membrane was confirmed by instrumental characterizations and its stability was also investigated by ICP-OES analysis. The obtained composite membrane can efficiently remove both arsenite (AsIII) and arsenate (AsV) from water under natural pH conditions. The adsorption kinetic fitted well with pseudo-second-order model and was dominated by chemisorption. Its adsorption isotherm can be described by Langmuir model. The maximal adsorption capacities of the hybrid membrane for As(V) and As(III) were 42.17 mg/g and 32.90 mg/g, respectively. Our results demonstrated that the MOFs-dispersed electrospun nanofiber membrane can greatly inherit the MOFs' original adsorption properties and exhibits good regenerability without loss of MOFs. Electrospinning is an effective and practical method for the preparation of MOFs hybrid membrane, which makes the composite very easy to be collected after use.

UiO-66-NH2 Fabrics: Role of Trifluoroacetic Acid as a Modulator on MOF Uniform Coating on Electrospun Nanofibers and Efficient Decontamination of Chemical Warfare Agent Simulants

Protective fabrics with air-permeable and flexible features are crucial for practical application in the detoxification of chemical warfare agents (CWAs). Zr-based metal-organic frameworks (Zr-MOFs) are desirable to exhibit outstanding degradation toward CWAs. However, generally, MOFs with powders cannot afford the utilization as a protective layer directly; meanwhile, it is still a puzzling challenge to integrate MOFs with textiles efficiently. Herein, we develop a scalable and controllable strategy to fabricate UiO-66-NH₂ on electrospun polyacrylonitrile nanofibers (UiO-66-NH₂ fabrics) firmly and uniformly to capture and catalyze 2-chloroethyl ethyl sulfide (CEES) effectively for self-detoxification. The obtained UiO-66-NH₂ fabrics are greatly capable of specific surface area, ample porosity, excellent crystallinity, and abundant catalytic active sites. Consequently, CEES can be removed efficiently up to 97.7% after 48 h by reaction and adsorption. The degradation products mainly including ethyl-2-hydroxyethyl sulfide, ether, bis[2-(ethylthio)ethyl], and 2-(2-(ethylthio)ethylamino) terephthalic acid are detected. Moreover, the obtained nanofibrous fabrics possess air-permeable, washable, and flexible as well as lightweight merits, totally ensuring their promising engineering applications for protective clothing.

Stretchable and Multi-Metal-Organic Framework Fabrics Via High-Yield Rapid Sorption-Vapor Synthesis and Their Application in Chemical Warfare Agent Hydrolysis

Protocols to create metal-organic framework (MOF)/polymer composites for separation, chemical capture, and catalytic applications currently rely on relatively slow solution-based processing to form single MOF composites. Here, we report a rapid, high-yield sorption-vapor method for direct simultaneous growth of single and multiple MOF materials onto untreated flexible and stretchable polymer fibers and films. The synthesis utilizes favorable reactant absorption into polymers coupled with rapid vapor-driven MOF crystallization to form high surface area (>250 m²/g_composite) composites, including UiO-66-NH₂, HKUST-1, and MOF-525 on spandex, nylon, and other fabrics. The resulting composites are robust and maintain their functionality even after stretching. Stretchable MOF fabrics enable rapid solid-state hydrolysis of the highly toxic chemical warfare agent soman and paraoxon-methyl simulant. We show that this approach can readily be scaled by solution spray-coating of MOF precursors and to large area substrates.

Water-stable zirconium-based metal-organic frameworks armed polyvinyl alcohol nanofibrous membrane with enhanced antibacterial therapy for wound healing

Inadequate water-stability and antibacterial activity limit the biomedical application of polyvinyl alcohol (PVA)-based membranes in moist environments. In this work, we propose a strategy to improve the water-stability of PVA membranes via metal complexation and heat treatment. We report a simple routine where the zirconium-based UiO-66-NH₂ metal-organic frameworks (MOFs) are nucleated as a layer on the surface of PVA nanofibrous membranes (UiO-66-NH₂@PVA NFMs). We find that the chemical modification of membranes increases their hydrophilicity and adds on mechanical support for the brittle UiO-66-NH₂ MOFs. Additionally, we demonstrate the application of UiO-66-NH₂ MOFs as drug carriers for antibacterial drug, levofloxacin (LV). The active drug component is preloaded during the one-step nucleation process. The obtained LV loaded UiO-66-NH₂@PVA NFMs (LV@UiO-66-NH₂@PVA) are shown to be bactericidal with the efficiency > 99.9% at 100 μg/mL against two bacterial species, Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Compared with the commercially available gauzes, the UiO-66-NH₂@PVA and LV@UiO-66-NH₂@PVA treatments will significantly improve the wound healing process. Animal studies show that the LV@UiO-66-NH₂@PVA will effectively offer a safe alternative solution for the patients to protect against bacterial infections, demonstrating the potential application of MOF-based NFMs as wound dressing agents.

Electrospinning of Metal-Organic Frameworks for Energy and Environmental Applications

Herein, recent developments of metal-organic frameworks (MOFs) structured into nanofibers by electrospinning are summarized, including the fabrication, post-treatment via pyrolysis, properties, and use of the resulting MOF nanofiber architectures. The fabrication and post-treatment of the MOF nanofiber architectures are described systematically by two routes: i) the direct electrospinning of MOF-polymer nanofiber composites, and ii) the surface decoration of nanofiber structures with MOFs. The unique properties and performance of the different types of MOF nanofibers and their derivatives are explained in respect to their use in energy and environmental applications, including air filtration, water treatment, gas storage and separation, electrochemical energy conversion and storage, and heterogeneous catalysis. Finally, challenges with the fabrication of MOF nanofibers, limitations for their use, and trends for future developments are presented.

MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures

Metal-organic frameworks (MOFs) are inherently crystalline, brittle porous solids. Conversely, polymers are flexible, malleable, and processable solids that are used for a broad range of commonly used technologies. The stark differences between the nature of MOFs and polymers has motivated efforts to hybridize crystalline MOFs and flexible polymers to produce composites that retain the desired properties of these disparate materials. Importantly, studies have shown that MOFs can be used to influence polymer structure, and polymers can be used to modulate MOF growth and characteristics. In this Review, we highlight the development and recent advances in the synthesis of MOF-polymer mixed-matrix membranes (MMMs) and applications of these MMMs in gas and liquid separations and purifications, including aqueous applications such as dye removal, toxic heavy metal sequestration, and desalination. Other elegant ways of synthesizing MOF-polymer hybrid materials, such as grafting polymers to and from MOFs, polymerization of polymers within MOFs, using polymers to template MOFs, and the bottom-up synthesis of polyMOFs and polyMOPs are also discussed. This review highlights recent papers in the advancement of MOF-polymer hybrid materials, as well as seminal reports that significantly advanced the field.

Metal-organic framework UiO-66 membranes

Metal-organic frameworks (MOFs) have emerged as a class of promising membrane materials. UiO-66 is a prototypical and stable MOF material with a number of analogues. In this article, we review five approaches for fabricating UiO-66 polycrystalline membranes including in situ synthesis, secondary synthesis, biphase synthesis, gas-phase deposition and electrochemical deposition, as well as their applications in gas separation, pervaporation, nanofiltration and ion separation. On this basis, we propose possible methods for scalable synthesis of UiO-66 membranes and their potential separation applications in the future.

Air, Water Vapor, and Aerosol Transport through Textiles with Surface Functional Coatings of Metal Oxides and Metal-Organic Frameworks

Currently, air permeable chemical/biological (CB) protective garments are based on activated carbon technology, which reduces moisture vapor transport needed for evaporative cooling and has potential to absorb and concentrate toxic materials. Researchers are exploring classes of sorbent materials that can selectively accumulate and decompose target compounds for potential to enhance protective suits and allow for novel filtration devices. Here, the metal-organic frameworks (MOFs) UiO-66-NH₂ and HKUST-1 have been identified as such materials. To better understand how MOFs can perform in future CB protective systems, atomic layer deposition (ALD) and solution deposition were used to modify nonwoven polypropylene and flame-resistant fabrics with HKUST-1 and UiO-66-NH₂. Air permeation, water vapor transport, filtration efficiency, and chemical reactivity against chemical agent simulants were assessed in relation to ALD thickness and MOF crystal size. MOF deposition on substrates decreased both air and chemical permeation while increasing filtration efficiency and chemical sorption. Moisture vapor transport was not affected by MOF growth on substrates, which is promising when considering thermal properties of protective garments. Future work should continue to explore how MOF deposition onto fiber and textile substrates impacts transport properties and chemical absorbance.

Incorporation of UiO-66-NH2 MOF into the PAN/chitosan nanofibers for adsorption and membrane filtration of Pb(II), Cd(II) and Cr(VI) ions from aqueous solutions

In the present study, the UiO-66-NH₂ MOF synthesized by microwave heating method was incorporated into the PAN/chitosan nanofibers for the removal of Pb(II), Cd(II) and Cr(VI) ions through the adsorption and membrane filtration processes. The synthesized MOFs and nanofibers were characterized using XRD, BET, FTIR, SEM, and DSC analysis. The effect of UiO-66-NH₂ MOF content (0-15 wt.%), pH (2-7), contact time(5-90 min), metal ions initial concentration (20-1000 mg/L) and temperature (25-45 °C) was studied on the metal ions adsorption using PAN/chitosan/UiO-66-NH₂ nanofibrous adsorbent. The kinetic, isotherm and thermodynamic parameters were evaluated to understand the metal ions adsorption mechanism using nanofibers. The Pseudo-second-order kinetic and Redlich-Peterson isotherm model were well described the experimental sorption data. In the heavy metal ions membrane filtration process, the different parameters such as MOF concentration (2-15 wt.%), membrane thickness (10-70 μm), metal ions concentration (5-50 mg/L), temperature (25-45 °C) and filtration time (1-24 h) were investigated on the performance of PVDF/ PAN/chitosan/UiO-66-NH₂ nanofibrous membrane toward metal ions removal. The high water flux and high metal ions removal within 18 h filtration time showed the high potential of PVDF/ PAN/chitosan/UiO-66-NH₂ membrane for the removal of metal ions from aqueous solutions.

Crystal Growth of Metal-Organic Framework-5 around Cellulose-Based Fibers Having a Necklace Morphology

Herein, metal-organic framework (MOF)-5 crystals were grown on cellulose-based substrates including paper and cotton. Dopamine was used as a surface modification agent to improve the compatibility between MOF-5 crystals and the used substrates. The formed polydopamine film promoted the growth of MOF-5 crystals, which were bonded to the substrates. Besides dopamine, the structure of the substrate also played a major role in the crystal growth. In the case of paper, which had a structure with fibers closely packed to each other, MOF-5 crystals grew only on the surface of fibers (one side) and could easily fall off. Unlike paper, the cotton bulb had a looser structure and MOF-5 crystals grew around the fibers, forming a stable "necklace" morphology. The effects of dopamine modification on the crystal growth and the formation of "necklace" morphology were investigated using scanning electron microscopy analysis. The crystalline structure of MOF-5 was confirmed using X-ray diffraction. To determine how firmly crystals were attached to the cotton fibers, the substrates were exposed to a constant and strong air flow. It was found that the dopamine-modified cotton increased the strength of MOF-5 crystals attached to fibers. This work demonstrated the firm attachment of MOF-5 crystals onto the substrate, facilitating various potential applications.

Fast and Sustained Degradation of Chemical Warfare Agent Simulants Using Flexible Self-Supported Metal-Organic Framework Filters

Self-detoxification filters against lethal chemical warfare agents (CWAs) are highly desirable for the protection of human beings and the environment. In this report, flexible self-supported filters of a series of Zr(IV)-based metal-organic frameworks (MOFs) including UiO-66, UiO-67, and UiO-66-NH₂ were successfully prepared and exhibited fast and sustained degradation of CWA simulants. A half-life as short as 2.4 min was obtained for the catalytic hydrolysis of dimethyl 4-nitrophenyl phosphate, and the percent conversion remained above 90% over a long-term exposure of 120 min, well exceeding those of the previously reported composite MOF filters and the corresponding MOF powders. The outstanding detoxification performance of the self-supported fibrous filter comes from the exceptionally high surface area, excellent pore accessibility, and hierarchical structure from the nano- to macroscale. This work demonstrates, for the first time, MOF-only filters as efficient self-detoxification media, which will offer new opportunities for the design and fabrication of functional materials for toxic chemical protection.

Air Activated Self-Decontaminating Polydicyclopentadiene PolyHIPE Foams for Rapid Decontamination of Chemical Warfare Agents

The threat of chemical warfare agents (CWA) compels research into novel self-decontaminating materials (SDM) for the continued safety of first-responders, civilians, and active service personnel. The capacity to actively detoxify, as opposed to merely sequester, offending agents under typical environmental conditions defines the added value of SDMs in comparison to traditional adsorptive materials. Porous polymers, synthesized via the high internal phase emulsion (HIPE) templating, provide a facile fabrication method for materials with permeable open cellular structures that may serve in air filtration applications. PolyHIPEs comprising polydicyclopentadiene (polyDCPD) networks form stable hydroperoxide species following activation in air under ambient conditions. The hydroperoxide-containing polyDCPD materials react quickly with CWA simulants, Demeton-S and 2-chloroethyl ethyl sulfide, forming oxidation products as confirmed via gas chromatography mass spectrometry. The simplicity of the detoxification chemistry paired with the porous foam form factor presents an exciting opportunity for the development of self-decontaminating filter media.