Porous TiO2 Nanoparticles Derived from Titanium Metal–Organic Framework and Its Improved Electrorheological Performance

Synergistic effects of oxygen vacancies and mesoporous structures in amorphous C@TiO2 for photocatalytic CO2 reduction

In this study, the theoretical calculations proves that the combination of oxygen vacancy and amorphous carbon films in TiO2 (VO-CT) can effectively reduce the energy bandgap and work function. The minimum Gibbs free energies required for the CO2RR reaction of VO-CT are 0.20 eV, which is lower than pure TiO2. The amorphous c@TiO2 nanomaterials with oxygen vacancy and mesoporous structures (VO-MCT) are prepared with the P123 surfactant as the template and oxalic acid as an inducer. The electron paramagnetic resonance indicates the presence of abundant oxygen vacancy defects in the samples. UV-vis spectra indicate that the mesoporous structure enhances light absorption capacity. The photocatalytic CO2 reduction tests show that the highest conversion rates for CH4 and CO of VO-MCT are 14 μmol g-1 h-1 and 10.66 μmol g-1 h-1, respectively. The electron consumption rate of VO-MCT is 12.43 times higher than that of commercial TiO2 (P200).

NH2-MIL-125-Derived N-Doped TiO2@C Visible Light Catalyst for Wastewater Treatment

The utilization of titanium dioxide (TiO2) as a photocatalyst for the treatment of wastewater has attracted significant attention in the environmental field. Herein, we prepared an NH2-MIL-125-derived N-doped TiO2@C Visible Light Catalyst through an in situ calcination method. The nitrogen element in the organic connector was released through calcination, simultaneously doping into the sample, thereby enhancing its spectral response to cover the visible region. The as-prepared N-doped TiO2@C catalyst exhibited a preserved cage structure even after calcination, thereby alleviating the optical shielding effect and further augmenting its photocatalytic performance by increasing the reaction sites between the catalyst and pollutants. The calcination time of the N-doped TiO2@C-450 °C catalyst was optimized to achieve a balance between the TiO2 content and nitrogen doping level, ensuring efficient degradation rates for basic fuchsin (99.7%), Rhodamine B (89.9%) and tetracycline hydrochloride (93%) within 90 min. Thus, this study presents a feasible strategy for the efficient degradation of pollutants under visible light.

Titanium oxide-coated titanium-loaded metal organic framework (MOF-Ti) nanoparticles show improved electrorheological performance

Uniform small-sized MOF-Ti nanoparticles were prepared by a one-step hydrothermal method, and then a 5-10 nm TiO2 shell was coated onto them by using the sol-gel method, and MOF-Ti/TiO2 with a specific surface area of 50.2 m2 g-1 was successfully prepared. The nanoparticles were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption-desorption isotherms (BET), and X-ray photoelectron spectroscopy (XPS). The above-analyses have elaborated the experimental study of their morphology, elements, and energy of organic functional groups. At the same time, through the use of a high-voltage rotary rheometer to test their rheological properties, the analysis of shear stress, ER efficiency, shear viscosity, etc. was performed and their dielectric constant and dielectric loss were studied by using a broadband dielectric spectrometer. Finally, we found that MOF-Ti/TiO2 is a new core-shell nanocomposite particle with a small particle size and good electrorheological properties.

Enhanced Electrorheological Response of Cellulose: A Double Effect of Modification by Urea-Terminated Silane

As a natural polymer with abundant sources, cellulose was one of the earliest applied electrorheological (ER) materials. However, cellulose-based ER materials have not attracted much attention because of their relatively low ER effect and sensitivity to water. In this study, cellulose rods were decorated with a urea-terminated silane, 1-(3-(trimethoxysilyl) propyl) urea, after being swelled in sodium hydroxide solution. The morphologies and structures of the cellulose particles were investigated using scanning electron microscopy, Fourier-transform infrared spectroscopy and X-ray diffraction, confirming the dramatic differences of the treated cellulose particles from the pristine cellulose. Rheological behaviors of the pristine and modified cellulose particles in silicone oil were observed using a rotational rheometer. It was found that the silane-modified cellulose showed higher ER effect and higher dielectric properties than the pristine cellulose particles, which was not only related to the grafted polar molecules but may also be associated with the porous morphologies of the treated cellulose particles.