Morphology-Dependent Catalytic Performance of NbOx/CeO2 Catalysts for Selective Catalytic Reduction of NOx with NH3

Optimizing study on the NH3-SCR activity of Ce-W-Ti@g-C3N4 catalyst: influence of graphite carbon nitride types

Herein, three g-C3N4(MCN/TCN/UCN), obtained by the direct pyrolysis of melamine/urea/thiourea respectively, were introduced as supports to optimize the NH3-SCR activity of Ce-W-Ti catalyst. Compared to CWT-400-Air, CWT@g-C3N4(2)-300-N2 exhibits lower crystalline anatase TiO2 and larger specific surface area, which improves the dispersion of Ce/W/Ti species on catalysts surface. Furthermore, the introduction of g-C3N4 as supports also contributes to doping C/N elements into Ce-W-Ti catalyst and increases the Ce3+/(Ce3++Ce4+) and Oα/(Oα+Oβ) molar ratios on catalyst surface. These all are advantageous to the NH3-SCR activity. However, UCN shows better promotional effect than MCN and TCN. This might be mainly attributed to the loose and porous stacked layered fold structure of UCN, the larger BET surface area, higher dispersion of Ce/W/Ti species and moderate weak/medium-strong acid sites of CWT@UCN(2)-300-N2. At the same time, the influence of carbon nitride amount, calcination atmosphere and calcination temperature on the NH3-SCR activity of CWT@g-C3N4 catalyst were also investigated.

Hydrothermal Aging Treatment Activates V2O5/TiO2 Catalysts for NOx Abatement

Thermal stability is crucial for the practical application of deNO_x catalysts. Vanadia-based catalysts are widely applied for the selective catalytic reduction of NO_x with NH₃ (NH₃-SCR). Generally, hydrothermal aging at high temperatures induces the deactivation of deNO_x catalysts. However, in this work, a remarkable increase in low- and medium-temperature NH₃-SCR activity was observed for a V₂O₅/TiO₂ catalyst after hydrothermal aging treatment, especially at 750 °C for 16 h. After the vanadia-based catalyst was hydrothermally treated at 750 °C, the specific surface area decreased and the surface VO_x density and surface V ratio increased significantly. Therefore, the aged catalyst presented more abundant polymeric vanadyl species than the fresh one. Furthermore, the redox capability was improved markedly after hydrothermal treatment due to the strong interaction of vanadia and titania, contributing to the NH₃-SCR reaction. 750 °C is the optimal temperature to activate the V₂O₅/TiO₂ catalyst, improving the SCR performance significantly. This study provides an in-depth understanding of vanadia-based catalysts for practical applications.

Manganese oxide nanorod catalysts for low-temperature selective catalytic reduction of NO with NH3

MnO_x nanorod catalysts were successfully synthesized by two different preparation methods using porous SiO₂ nanorods as the template and investigated for the low-temperature selective catalytic reduction (SCR) of NO with NH₃. The catalysts were characterized by scanning electron microscopy, transmission electron microscopy, nitrogen adsorption, X-ray diffraction, X-ray photoelectron spectroscopy, and NH₃ temperature-programmed desorption. The results show that the obtained MnO_x-P nanorod catalyst prepared by redox precipitation method exhibits higher NO removal activity than that prepared by the solvent evaporation method in the low temperature range of 100–180 °C, where about 98% NO conversion is achieved over MnO_x(0.36)-P nanorods. The reason is mainly attributed to MnO_x(0.36)-P nanorods possessing unique flower-like morphology and mesoporous structures with high pore volume, which facilitates the exposure of more active sites of MnO_x and the adsorption of reactant gas molecules. Furthermore, there is a lower crystallinity of MnO_x, higher percentage of Mn⁴⁺ species and a large amount of strong acid sites on the surface. These factors contribute to the excellent low-temperature SCR activity of MnO_x(0.36)-P nanorods.

Compared with MnO_x(0.36)-E nanorods, MnO_x(0.36)-P nanorods possess unique flower-like morphology and mesoporous structures with high pore volume, contributing to the excellent low-temperature SCR activity of MnO_x(0.36)-P nanorods.

Adsorption-Induced Active Vanadium Species Facilitate Excellent Performance in Low-Temperature Catalytic NOx Abatement

Vanadia-based catalysts have been widely used for catalyzing various reactions, including their long-standing application in the deNO_x process. It has been commonly considered that various vanadium species dispersed on supports with a large surface area act as the catalytically active sites. However, the role of crystalline V₂O₅ in selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) remains unclear. In this study, a catalyst with low vanadia loading was synthesized, in which crystalline V₂O₅ was deposited on a TiO₂ support that had been pretreated at a high temperature. Surprisingly, the catalyst, which had a large amount of crystalline V₂O₅, showed excellent low-temperature NH₃-SCR activity. For the first time, crystalline V₂O₅ on low-vanadium-loading catalysts was found to be transformed to polymeric vanadyl species by the adsorption of NH₃. The generated active polymeric vanadyl species played a crucial role in NH₃-SCR, leading to remarkably enhanced catalytic performance at low temperatures. This new finding provides a fundamental understanding of the metal oxide-catalyzed chemical reaction and has important implications for the development and commercial applications of NH₃-SCR catalysts.

Iron-Based Composite Oxide Catalysts Tuned by CTAB Exhibit Superior NH3–SCR Performance

Iron-based oxide catalysts for the NH3–SCR (selective catalytic reduction of NOx by NH3) reaction have gained attention due to their high catalytic activity and structural adjustability. In this work, iron–niobium, iron–titanate and iron–molybdenum composite oxides were synthesized by a co-precipitation method with or without the assistance of hexadecyl trimethyl ammonium bromide (CTAB). The catalysts synthesized with the assistance of CTAB (FeM0.3Ox-C, M = Nb, Ti, Mo) showed superior SCR performance in an operating temperature range from 150 °C to 400 °C compared to those without CTAB addition (FeM0.3Ox, M = Nb, Ti, Mo). To reveal such enhancement, the catalysts were characterized by N2-physisorption, XRD (Powder X-ray diffraction), NH3-TPD (temperature-programmed desorption of ammonia), DRIFTS (Diffuse Reflectance Infrared Fourier Transform Spectroscopy), XPS (X-ray Photoelectron Spectroscopy), and H2-TPR (H2-Total Physical Response). It was found that the crystalline phase of Fe2O3 formed was influenced by the presence of CTAB in the preparation process, which favored the formation of crystalline γ-Fe2O3. Owing to the changed structure, the redox-acid properties of FeM0.3Ox-C catalysts were modified, with higher exposure of acid sites and improved ability of NO oxidation to NO2 at low-temperature, both of which also contributed to the improvement of NOx conversion. In addition, the weakened redox ability of Fe prevented the over-oxidation of NH3, thus accounting for the greatly improved high-temperature activity as well as N2 selectivity.

The Effect of Tourmaline on SCR Denitrification Activity of MnOx/TiO2 at Low Temperature

Selective catalytic reduction (SCR) technology is the most widely used flue gas denitration technology at present. The stability of a catalyst is the main factor limiting the development of this technology. In this study, an environmentally friendly and highly efficient NH3-SCR catalyst was prepared by coprecipitation method from acidolysis residue of industrial waste and tourmaline. We found that the addition of tourmaline has an important impact on the denitration activity of the catalytic material. The NOx conversion exceeded 97% at 200 °C with the dosage of 10% tourmaline, which is about 7% higher than that without doping. The improvement of catalytic performance was mostly attributed to the permanent electrodes of tourmaline, which effectively promotes the dispersion of MnOx/TiO2 catalytic materials, increases the number of acidic sites and changes the valence distribution of manganese ions in products, which speeds up the diffusion of protons and ions, resulting in the acceleration of redox reaction. These as-developed tourmaline-modified MnOx/TiO2 materials have been demonstrated to be promising as a new type of highly efficient low-temperature NH3-SCR catalyst.

Promotion effect of cerium doping on iron–titanium composite oxide catalysts for selective catalytic reduction of NOx with NH3

Doping with a suitable amount of Ce enhances the SCR performance of FeTi catalysts.