Kinetics of Hydrothermal Furfural Production from Organosolv Hemicellulose and d-Xylose

Demonstration and Assessment of Purification Cascades for the Separation and Valorization of Hemicellulose from Organosolv Beechwood Hydrolyzates

Hemicellulose and its derivatives have a high potential to replace fossil-based materials in various high-value-added products. Within this study, two purification cascades for the separation and valorization of hemicellulose and its derived monomeric sugars from organosolv beechwood hydrolyzates (BWHs) were experimentally demonstrated and assessed. Purification cascade 1 included hydrothermal treatment for converting remaining hemicellulose oligomers to xylose and the purification of the xylose by nanofiltration. Purification cascade 2 included the removal of lignin by adsorption, followed by ultrafiltration for the separation and concentration of hemicellulose. Based on the findings of the experimental work, both cascades were simulated on an industrial scale using Aspen Plus®. In purification cascade 1, 63% of the oligomeric hemicellulose was hydrothermally converted to xylose and purified by nanofiltration to 7.8 t/h of a xylose solution with a concentration of 200 g/L. In purification cascade 2, 80% of the lignin was removed by adsorption, and 7.6 t/h of a purified hemicellulose solution with a concentration of 200 g/L was obtained using ultrafiltration. The energy efficiency of the cascades was 59% and 26%, respectively. Furthermore, the estimation of specific production costs showed that xylose can be recovered from BWH at the cost of 73.7 EUR/t and hemicellulose at 135.1 EUR/t.

The Kinetics Studies on Hydrolysis of Hemicellulose

The kinetics studies is of great importance for the understanding of the mechanism of hemicellulose pyrolysis and expanding the applications of hemicellulose. In the past years, rapid progress has been paid on the kinetics studies of hemicellulose hydrolysis. In this article, we first introduced the hydrolysis of hemicelluloses via various strategies such as autohydrolysis, dilute acid hydrolysis, catalytic hydrolysis, and enzymatic hydrolysis. Then, the history of kinetic models during hemicellulose hydrolysis was summarized. Special attention was paid to the oligosaccharides as intermediates or substrates, acid as catalyst, and thermogravimetric as analyzer method during the hemicellulose hydrolysis. Furthermore, the problems and suggestions of kinetic models during hemicellulose hydrolysis was provided. It expected that this article will favor the understanding of the mechanism of hemicellulose pyrolysis.

Brewers' spent grain as carbon source for itaconate production with engineered Ustilago maydis

Brewers' spent grain (BSG) is produced worldwide in millions of tons during the beer brewing process. Due to its high content of structural carbohydrates, BSG is a promising material for being valorised in biorefineries. In this study three process routes for producing itaconate from BSG hydrolysates are presented using the previously engineered smut fungi UstilagomaydisMB215Δcyp3ΔP_ria1::P_etef as whole-cell biocatalyst. Using a fermentation medium based on BSG hydrolysate a yield of 0.38g_Ita/g_Sugar and a productivity of 0.11g_Ita/(L·h) were achieved. The addition of detoxified hydrothermal supernatant to the fermentation medium did not result in improved performance parameters but resulted in a decreased yield (0.29g_Ita/g_Sugar) and productivity (0.053 g_Ita/(L·h)). Simultaneous saccharification and fermentation with hydrothermal pretreated BSG is possible, although at lower rate. In summary, the valorisation of BSG in fungal fermentations might complement the end-of-life options of this industrial side product.

Production of Bio-Based Chemicals, Acetic Acid and Furfural, through Low-Acid Hydrothermal Fractionation of Pine Wood (Pinus densiflora) and Combustion Characteristics of the Residual Solid Fuel

Low-acid hydrothermal (LAH) fractionation conditions were optimized for the effective degradation of hemicellulose from pine wood (Pinus densiflora). The hemicellulosic sugar yield was maximized at 82.5% when the pine wood was fractionated at 190 °C, with 0.5 wt.% of sulfuric acid, and for 10 min. Consecutively, acidified heat treatment with zinc chloride and solvent extraction with ethyl acetate were carried out for the recovery of bio-based platform chemicals, such as furfural and acetic acid, from liquid hydrolysate through liquid–liquid extraction (LLE). Overall, 61.5% of xylose was decomposed into furfural, and the yield of acetic acid was 62.3% and furfural 66.1%. After LAH fractionation, 64.8% of the solid remained and was pelletized. The pellets showed excellent fuel characteristics, i.e., significant ash rejection (74.5%) and high calorific values (4770 kcal/kg), and the precursors of NOx and SOx also decreased by up to 60.0% and 71.4%, respectively.

Reaction Kinetics of One-Pot Xylan Conversion to Xylitol via Precious Metal Catalyst

The hydrolytic hydrogenation of xylan to xylitol by a one-pot process was studied in detail in a batch reactor. The reaction was catalyzed by a combination of diluted sulfuric acid and precious metal Ru on carbon powder. Process parameters were varied between 120–150°C, while maintaining constant hydrogen pressure at 20 bar and an acid concentration equivalent to pH 2. The xylan solution consisted of 1 wt% beechwood powder (Carl Roth, >90%) in deionized water. Sulfuric acid was added to the solution until pH two was reached, then the 0.3 wt% catalyst powder (5% Ru on Act. C) was added and the solution was put into the batch reactor. The first approach of kinetic modeling began with conventional first-order kinetics and compared this to a more complex model based on Langmuir–Hinshelwood kinetics. The xylan and xylitol data reached a good fit. However, the modeling results also showed that the rate-limiting step of xylose-formation was still not represented in a satisfactory manner. Therefore, the model was adapted and developed further. The advanced model finally showed a good fit with the intermediate product xylose and the target product xylitol. The overall modeling methods and results are presented and discussed.