UV-Driven Antifouling Paper Fiber Membranes for Efficient Oil–Water Separation

Recent developments in the application of membrane separation technology and its challenges in oil-water separation: A review

In the development and production process of domestic and foreign oil fields, large amounts of oil-bearing wastewater with complex compositions containing toxic and harmful pollutants are generated. These oil-bearing wastewaters will cause serious environmental pollution if they are not effectively treated before discharge. Among these wastewaters, the oily sewage produced in the process of oilfield exploitation has the largest content of oil-water emulsion. In order to solve the problem of oil-water separation of oily sewage, the paper summarizes the research of many scholars in many aspects, such as the use of physical and chemical methods such as air flotation and flocculation, or the use of mechanical methods such as centrifuges and oil booms for sewage treatment. Comprehensive analysis shows that among these oil-water separation methods, membrane separation technology has higher separation efficiency in the separation of general oil-water emulsions than other methods and also exhibits a better separation effect for stable emulsions, which has a broader application prospect for future developments. To present the characteristics of different types of membranes more intuitively, this paper describes the applicable conditions and characteristics of various types of membranes in detail, summarizes the shortcomings of existing membrane separation technologies, and offers prospects for future research directions.

Novel Engineered Carbon Cloth-Based Self-Cleaning Membrane for High-Efficiency Oil-Water Separation

A novel engineered carbon cloth (CC)-based self-cleaning membrane containing a Cu:TiO2 and Ag coating has been created via hydrothermal and light deposition methods. The engineered membrane with chrysanthemum morphology has superhydrophilic and underwater superoleophilic performance. The cooperativity strategy of Cu doping and Ag coating to the TiO2 is found to be critical for engineering the separation efficiency and self-cleaning skill of the CC-based membrane under visible light due to the modulated bandgap structure and surface plasmon resonance. The CC-based membrane has excellent oil-water separation performance when Cu is fixed at 2.5 wt% and the Ag coating reaches a certain amount of 0.003 mol/L AgNO3. The contact angle of underwater oil and the separation efficiency are 156° and 99.76%, respectively. Furthermore, the membrane has such an outstanding self-cleaning ability that the above performance can be nearly completely restored after 30 min of visible light irradiation, and the separation efficiency can still reach 99.65% after 100 cycles. Notably, the membrane with exceptional wear resistance and durability can work in various oil-water mixtures and harsh environments, indicating its potential as a new platform of the industrial-level available membrane in dealing with oily wastewater.

Coordination-driven interfacial cross-linked graphene oxide-alginate nacre mesh with underwater superoleophobicity for oil-water separation

Inspired by the seashell nacre and seaweed, a novel GO-Ca²⁺-SA nacre-inspired hybrid mesh was prepared via an interfacial layer-by-layer self-assembly and cross-linking, using graphene oxide (GO) and sodium alginate (SA) as the building blocks and calcium chloride as the coordination agent, respectively. Hybrid mesh was characterized by FTIR, XPS, XRD, SEM and contact angel instrument, showing superhydrophilic and underwater superoleophobic property and low oil adhesion, due to its wrinkle and rough surface, and high hydration ability of GO-Ca-alginate nanohydrogels. The separation efficiencies of various oil-water mixtures were above 99 %, with a highest flux of 119,426 L m^-2 h^-1. Hybrid mesh showed an orderly layered "brick and mortar" microstructure with many ultrasmall nanoscaled protuberances. Ca²⁺ ions could chelate with SA to form the "egg-box" structure, and interact with GO nanosheets. Hybrid mesh possessed high salt/acid/alkaline tolerance, abrasion resistance, mechanical property with Young's modulus of 35.8 ± 4.9 GPa, and excellent cycling stability.

Fabricating acid-sensitive controlled PAA@Ag/AgCl/CN photocatalyst with reversible photocatalytic activity transformation

Achieving the intelligent controllability of the photocatalyst to the surrounding environment is a very meaningful work. Here, the polyacrylic acid (PAA) modified Ag/AgCl-40/CN composite was constructed to achieve an intelligent response of pH value. PAA exhibits hydrophilic properties at high pH value, increasing the adsorption capacity to tetracycline (TC) molecules. The morphology of PAA from contracted state to diastolic state, releasing the Ag/AgCl-40/CN catalyst. In addition, PAA modified Ag/AgCl-40/CN can prevent the loss of AgCl. The g-C₃N₄ nanosheets (CN) as a carrier enhance the dispersibility of the AgCl particles. The LSPR effects of Ag nanoparticles produce more electrons acting on photocatalytic degradation. On the results of experiment, the degradation of TC by PAA@Ag/AgCl-40/CN shows an excellent degradation activity when the high pH value. Photoluminescence spectroscopy and photocurrent demonstrate that carrier separation efficiency of PAA@Ag/AgCl-40/CN is higher than CN and Ag/AgCl-40/CN. The detection of the main active substances •O₂^- and h⁺, revealing a reasonable mechanism for the PAA@Ag/AgCl-40/CN hybrid system. This work provides a procedure to obtain smart materials that can switch photocatalytic processes.

Durable Light-Driven Three-Dimensional Smart Switchable Superwetting Nanotextile as a Green Scaled-Up Oil-Water Separation Technology

Stimuli-responsive polymer architectures are attracting a lot of interest, but it still remains a great challenge to develop effective industrial-scale strategies. A single-stage and cost-effective approach was applied to fabricate a three-dimensional (3D) smart responsive surface with fast and reversibly switchable wetting between superhydrophobicity and superhydrophilicity/underwater superoleophobicity properties induced by photo and heat stimuli. Commercially available PVDF and P25TiO₂ as starting materials fabricated with a scaled-up electrospinning approach were applied to prepare 3D smart switchable PVDF-P25TiO₂ nanotextile superwetted by both UV and solar light that is simply recovered by heat at a reasonable time. The superhydrophilic/underwater superoleophobic photo-induced nanotextile will act in "water-removing" mode in which water quickly passes through and the oil is blocked on the surface. An acceptable recycling, reusing, and superior antifouling and self-cleaning performance arising from a TiO₂ photocatalytic effect makes it highly desired in a green scaled-up industry oily wastewater treatment technology. With these advantages, a large-scale industrial production process can be simply simulated by applying a conducting mesh-like collector substrate.

Robust Nacrelike Graphene Oxide-Calcium Carbonate Hybrid Mesh with Underwater Superoleophobic Property for Highly Efficient Oil/Water Separation

Inspired by the mastoid structure of the lotus leaf and the robust layered structure of the nacre, a novel nacrelike graphene oxide-calcium carbonate (GO-CaCO₃) hybrid mesh with superhydrophilic and underwater superoleophobic property was prepared for the first time, via a facile, economical, and environmentally friendly layer-by-layer (LBL) self-assembly method using commercially available stainless steel mesh (SSM) as a ready-made mask. Interestingly, GO nanosheets played a threefold role, regulating the growth of CaCO₃ nanocrystals between the GO interlamination for constructing a "brick-and-mortar" structure, improving the interface stability via coordination assembly onto SSM, and creating strong hydration derived from rich oxygen-containing functional groups. The surface hydrophilicity and hierarchically micro/nanoscale structure of GO-CaCO₃ artificial pearls imbed on the SSM, contributing to outstanding superhydrophilicity and underwater superoleophobicity. The biomimetic hybrid mesh exhibited a strong mechanical property with a Young's modulus of 25.4 ± 2.6 GPa. The optimized hybrid mesh showed a high separation efficiency of more than 99% toward a series of oil/water mixtures with high flux. The low oil-adhesion force, high fatigue-resistance, chemical stability (acid/alkali/salt resistance), and excellent recycling performance enlighten the great prospects of GO-based nacrelike material for application in oily wastewater treatment.

A facile surface modification of a PVDF membrane via CaCO3 mineralization for efficient oil/water emulsion separation

A facile modification of a PVDF membrane using CaCO₃ inorganic particles via a layer-by-layer self-assembly process for efficient oil/water separation.