Preventing Water-Induced Mechanical Deterioration of Cardboard by a Sequential Polymer Treatment

Evaluation of Coatings to Improve the Durability and Water-Barrier Properties of Corrugated Cardboard

Recently, corrugated cardboard furniture gained interest from the market, yet is limited to indoor application. With an aim toward outdoor usage, water-barrier improvement of such products must be achieved. In this work, three commercially available coating grades (i.e., polymeric, mineral-filled polymeric, and hybrid silica sol-gel products) were spray-coated on corrugated cardboard using a facile, yet readily transferable, process. The investigation assessed the coating performance from the different drying conditions and natural UV-vis weathering effects, characterising their water absorption, hydrophobicity, coating morphology, and colour change. Results show a reduction in water absorption values (up to −98%) for both the polymeric coatings; instead, the hybrid sol-gel coating showed contact angles up to almost 150°. Generally, the SEM micrographs displayed some surface defects as well as good thickness homogeneity. A perceivable colour change occurred for each sample (CIEDE2000 up to 6.41), mainly occurring in the 0–100 h time range. This work provides promising results for the outdoor application of corrugated cardboard furniture.

An Experimental Study on the Performance of Corrugated Cardboard as a Sustainable Sound-Absorbing and Insulating Material

The continuing development of industrialization and increasing population density has led to the emergence of noise as an increasingly common problem, requiring various types of sound absorption and insulation methods to address it. Meanwhile, the recycling of resources to ensure a sustainable future for the planet and mankind is also required. Therefore, this study investigates the potential of corrugated cardboard as a resource for noise reduction. The sound absorption and insulation performance of non-perforated corrugated cardboard (NPCC) were measured, and modified corrugated boards were fabricated by drilling holes either through the surface of the corrugated board alone or through the corrugated board in its entirety. The sound-absorption/insulation performance both of perforated corrugated cardboard (PCC) and perforated corrugated cardboard with multi-frequency resonators (PCCM) were measured using the transfer function method and the transmission matrix method. To determine the effectiveness of NPCC, PCC, and PCCM in noise reduction, the sound pressure level was analyzed by applying it to a home blender. The results showed PCCM’s sound absorption and insulation performance to be excellent. On the basis of these findings, we propose the use of PMMC as an eco-friendly noise-reduction material.

Minimizing Organic Waste Generated by Pineapple Crown: A Simple Process to Obtain Cellulose for the Preparation of Recyclable Containers

In this study, cellulose was obtained from the residues of pineapple crown by means of simple acid pretreatment and subsequent alkaline treatment. The pretreatment consisted of washing, drying, and chopping with high shear at pH = 5 under heating. The content of cellulose, hemicellulose, and lignin in the pineapple crown was determined by chemical methods. The cellulose obtained was compared with commercial cellulose by Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis, and X-ray diffraction (XDR). Thus, from the obtained fiber cellulose, a food container was prepared, and its physical-mechanical properties were determined. Then, after alkali treatment, the purity of cellulose was 84.7% from the pineapple crown (56.0%) and was compared with commercial cellulose (95%). FTIR results confirmed the removal of the non-cellulosic compounds after alkali treatment. The maximum pyrolysis temperature increased to 356 °C, higher than the original fiber (322 °C), indicating greater thermal stability after chemical treatment. Furthermore, the crystallinity increased to 68% with respect to the original fiber (27%). The physical properties of the container showed a decrease in the parameters in wet 95% RH, as expected, thus facilitating its reuse. These results indicate that the pineapple crown cellulose can be obtained with significant purity, from a single chemical treatment. In addition, this polymorphous cellulose can be used to make ecofriendly reusable food containers.