Fundamental Formation of Three-Dimensional Fe3O4 Microcrystals and Practical Application in Anchoring Au as Recoverable Catalyst for Effective Reduction of 4-Nitrophenol

Design and optimization of a cost-effective paper-based voltammetric sensor for the determination of trinitrotoluene (TNT) utilizing cysteamine-linked Fe3O4 @Au nanocomposite

This paper presents the development and optimization of a cost-effective paper electrochemical sensor for the detection of TNT using Fe3O4-Au core-shell nanoparticles modified with cysteamine (Fe3O4@Au/CA). The sensor was constructed by modifying a graphite paste with the aforementioned nanoparticles, which facilitated the formation of a Meisenheimer complex between cysteamine and TNT as an electron donor and an electron acceptor, respectively. The central composite design was employed to optimize four key parameters pH, modifier percentage, contact time, and buffer type to enhance the performance of the sensor. The detection limit was found to be 0.5 nM of TNT, while the linear range of the electrode response spanned from 0.002 μM to 10 μM. The simplicity and low cost of the sensor make it highly attractive for practical applications, particularly in scenarios where rapid and on-site TNT detection is required.

Leveraging Direct Pyrolysis for the Synthesis of 10 nm Monodispersed Fe3O4/Fe3C NPS@Carbon to Improve SupercapacitANCE in Acidic Electrolyte

The prevailing practice advocates pre-oxidation of electrospun Fe-salt/polymer nanofibers (Fe-salt/polymer Nf) before pyrolysis as advantageous in the production of high-performance FeOx@carbon nanofibers supercapacitors (FeOx@C). However, our study systematically challenges this notion by demonstrating that pre-oxidation facilitates the formation of polydispersed and large FeOx nanoparticles (FeOx@CI-DA) through "external" Fe3+ Kirkendall diffusion from carbon, resulting in subpar electrochemical properties. To address this, direct pyrolysis of Fe-salt/polymer Nf is proposed, promoting "internal" Fe3+ Kirkendall diffusion within carbon and providing substantial physical confinement, leading to the formation of monodispersed and small FeOx nanoparticles (FeOx@CDA). In 1 M H2SO4, FeOx@CDA demonstrates ~2.60× and 1.26× faster SO4 2- diffusivity, and electron transfer kinetics, respectively, compared to FeOx@CI-DA, with a correspondingly ~1.50× greater effective surface area. Consequently, FeOx@CDA exhibits a specific capacity of 161.92 mAhg-1, ~2× higher than FeOx@CI-DA, with a rate capability ~19 % greater. Moreover, FeOx@CDA retains 94 % of its capacitance after 5000 GCD cycles, delivering an energy density of 26.68 Whkg-1 in a FeOx@CDA//FeOx@CDA device, rivaling state-of-the-art FeOx/carbon electrodes in less Fe-corrosive electrolytes. However, it is worth noting that the effectiveness of direct pyrolysis is contingent upon hydrated Fe-salt. These findings reveal a straightforward approach to enhancing the supercapacitance of FeOx@C materials.

Single-step fabrication of surface morphology tuned iron oxide anchored highly porous carbon nanotube hybrid foam for a highly stable supercapacitor electrode

The pseudocapacitive metal oxide anchored nanocarbon-based three-dimensional (3D) materials are considered attractive electrode materials for high-performance supercapacitor applications. However, the complex multistep synthesis approaches raise production costs and act as a major barrier to the practical real-world field. To overcome this limitation, in this study, an easily scalable and effective fabrication approach for the development of iron oxide (Fe₃O₄) anchored highly porous carbon nanotube hybrid foam (f-Fe₃O₄/O-CNTF) with micro/mesoporous structure was suggested to improve the durability and energy storage performance. The surface morphology-tuned f-Fe₃O₄/O-CNTF (f-Fe₃O₄/O-CNTF(M)) was fabricated through electromagnetic interaction between the anchored magnetic Fe₃O₄ on the CNT surface and the applied magnetic field. The obtained results clearly demonstrated that the changed surface morphology of the f-Fe₃O₄/O-CNTF(M) strongly affected the meso- and micropore structure, electrochemical performance, and durability. Consequently, the f-Fe₃O₄/O-CNTF(M) showed an almost 120% enhanced specific surface area and nearly 1.9 times increased specific capacitance compared to that of the f-Fe₃O₄/O-CNTF. Furthermore, the changed surface morphology successfully prevented the re-aggregation of the initial structure and significantly improved durability. As a result, f-Fe₃O₄/O-CNTF(M) showed outstanding cycling stability, maintaining almost 100% capacitance retention after 14,000 cycles. Consequently, the assembled symmetric supercapacitor device delivered an energy density of 20.1 Wh·kg^-1 at a power density of 0.37 kW·kg^-1 with good cycling stability. These results suggest that the f-Fe₃O₄/O-CNTF(M) can potentially be used as an electrode for supercapacitors with good durability.

Wastewater treatment: A universal, scalable and recyclable catalyst with adjustable activity for diverse dyes degradation

The growing concern over water shortage and pollution is propelling and accelerating the development of sewage treatment technologies. Among them, the catalytic hydrogenation method is highly recommended from a sustainable perspective, because it can turn toxic pollutants into valuable raw materials. The catalyst with excellent activity and stability plays a critical role in this "trash to treasure" approach. Herein, we proposed a novel economical, scalable and recyclable candidate catalyst, i.e., the copper nanoparticles supported on zinc oxide nanowire array (Cu-ZnO NWA), for realizing efficient and stable dye wastewater treatment. The salix argyracea-shaped Cu-ZnO NWA displays very outstanding universality and controllability towards the catalytic hydrogenation reactions of diverse dyes, owing to the fact that ZnO nanowire array not only offers a platform to realize stable and homogeneous dispersion of Cu nanoparticles, but also provides a large quantity of catalytically active sites. More attractively, its synthetic method can be facilely extended to various conductive substrates through combined electrodeposition and hydrothermal technique, showing its general applicability for the surface assembly of sewage treatment facilities. Benefiting from above advantages, this proposal offers an attractive approach for large-scale and continuous decolorization of dye wastewater, and presents a broad application prospect in the textile printing industry.

Preparation of Reduced-Graphene-Oxide-Supported CoPt and Ag Nanoparticles for the Catalytic Reduction of 4-Nitrophenol

Composite nanostructure materials are widely used in catalysis. They exhibit several characteristics, such as the unique structural advantage and the synergism among their components, which significantly enhances their catalytic performance. In this work, CoPt nanoparticles and reduced-graphene-oxide-based nanocomposite catalysts (rGO/CoPt, rGO/CoPt/Ag) were prepared by using a facile co-reduction strategy. The crystalline structure, morphology, composition, and optical characteristics of the CoPt nanoparticles, rGO/CoPt nanocomposite, and rGO/CoPt/Ag nanocomposite catalysts were investigated by a set of techniques. The ID/IG value of the rGO/CoPt/Ag nanocomposite is 1.158, higher than that of rGO/CoPt (1.042). The kinetic apparent rate constant, k, of the rGO/CoPt/Ag nanocomposite against 4-nitrophenol (4-NP) reduction is 5.306 min−1, which is higher than that of CoPt (0.495 min−1) and rGO/CoPt (1.283 min−1). The normalized rate constant, knor, of the rGO/CoPt/Ag nanocomposite is 56.76 min−1mg−1, which is higher than some other catalytic materials. The rGO/CoPt/Ag nanocomposite shows a significantly enhanced catalytic performance when compared to CoPt nanoparticles and the rGO/CoPt nanocomposite, which may confirm that the novel rGO/CoPt/Ag nanocomposite is a promising catalyst for the application of catalytic fields.

Size-Dependent Catalytic Activity of PVA-Stabilized Palladium Nanoparticles in p-Nitrophenol Reduction: Using a Thermoresponsive Nanoreactor

Palladium nanoparticles (Pd NPs) of various average global diameters (2.1-7.1 nm) encapsulated with hydrophilic polymer polyvinyl alcohol (PVA) have been synthesized and used as catalysts for sodium borohydride assisted reduction of p-nitrophenol to p-aminophenol. The synthesized catalysts exhibit excellent and typical size-dependent catalytic activity in the green protocol. UV-visible absorption spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were employed to characterize the prepared Pd NPs. The kinetics of this reaction was easily monitored by a UV-visible absorption spectrophotometer. The mechanism of the reaction is explained by the Langmuir-Hinshelwood model. The catalytic performance increases with decreasing size of the synthesized nanoparticles. The apparent rate constants (k app × 103/s-1) of the catalytic reduction in the presence of Pd NPs of average diameters of 2.1, 3.35, 6.2, and 7.1 nm are determined as 8.57, 7.67, 6.16, and 5.04, respectively, at 298 K by using 2.91 mol % palladium nanocatalyst in each case. Moreover, the estimated activation energy of 22.2 kJ mol-1 obtained for Pd NPs with the smallest average diameter of 2.1 nm is very low as reported in the literature for the reduction. The influences of catalyst dose and concentration of p-nitrophenol on catalytic reduction are fully investigated. The catalyst with the largest diameter shows a temperature-sensitive property that might be due to the presence of a very low amount of rapped PVA used as stabilizer during the fabrication process. Thus, the synthetic protocol provides a unique fabrication process of a catalytically active thermoresponsive nanoreactor consisting of Pd NPs encapsulated into a PVA stabilizing agent.

One-spot fabrication and in-vivo toxicity evaluation of core-shell magnetic nanoparticles

This research, for the first time, report the synthesis of core-shell magnetic nanoparticles (NPs) consisting poly acrylic acid (PAA) coated cobalt ferrite (CF) using a simple co-precipitation route. Nanocrystalline PAA@CF-NPs, particle size of 9.2 nm, exhibited saturation magnetization as 28.9 emu/g, remnant magnetization as 8.37 emu/g, and coercivity as 543 Oe. Keeping biomedical applications into consideration, PAA@CF-NPs were further analysed to evaluate antimicrobial performance against Gram positive (Staphylococcus aureus and Bacillus subtilis) and Gram negative (Pseudomonas aeruginosa and Escherichia coli) bacteria, and biocompatibility with reference to activated splenic cells. The PAA@CF-NPs were viable to the normal splenic cells (up to 1000 μg/ml) and do not affect the ability of fast dividing ability of the cells (activated splenic cells). An optimized dose of PAA@CF-NPs was intramuscularly administrated (100 μg/ml) into Albino mice to evaluate acute toxicity. The results of these studies suggest that injected PAA@CF-NPs do not affect vital organs mainly including liver and kidneys that confirmed the heptic/renal biocompatibility. The outcomes of this research project such developed nano-system for biomedical applications, mainly for magnetically guided drug delivery and image guided therapies development. However, to support the proposed claims, extended in-vivo studies are required to explore bio-distribution, chronic toxicity, and homeostatic conditions.

Plasmonic foam platforms for air quality monitoring

Plasmonic reversible gas sensors are of paramount importance for the monitoring of indoor environments. Herein, we design and engineer a plasmonic foam, with a high surface area, confined inside a capillary glass tube for the live monitoring of carbon monoxide (CO) in closed environments using surface-enhanced resonance Raman scattering. The illumination of the sensor with light during the flow of air allows the live monitoring of the concentration of atmospheric CO through surface-enhanced resonance Raman scattering. The sensor was prepared with a detection range from 10 to 40 ppm, due to health needs. The results show a sensitive, selective, reversible and robust sensor applicable to the monitoring of CO levels but also to other gas species upon appropriate functionalization.

Highly Efficient Silver Catalyst Supported by a Spherical Covalent Organic Framework for the Continuous Reduction of 4-Nitrophenol

Developing new materials and novel technologies for the highly efficient treatment of toxic organic pollutants is highly desirable. Chemical reduction based on heterogeneous substrate/noble metal catalysts and the reducing agent NaBH₄ has become an effective method in recent years. Here, a spherical covalent organic framework (SCOF) was designed to provide basic sites for Ag ions, by which small Ag NPs were immobilized on the SCOF to form Ag NPs@SCOF microspheres. The prepared microspheres exhibited a high catalytic reduction ability toward 4-nitrophenol (4-NP). An optimized permeation flux of 2000 L m^-2 h^-1 (LMH) and a more than 99% 4-NP reduction efficiency were obtained with flow-through experiments, which are far better than the reported results (below 200 LMH). Moreover, the microspheres could maintain stable catalytic performance under a continuous flow-through process. Our work provides an efficient material and technology that can be applied to easily treat toxic organic pollutants.

A novel Au/electroactive poly(amic acid) composite as an effective catalyst for p-nitrophenol reduction

A Au/electroactive poly(amic acid) (Au/EPAA) composite was synthesized and characterized, and its catalytic ability was evaluated. EPAA was synthesized via oxidative coupling polymerization and Au nanoparticles were anchored to the amino and carboxyl groups. The Au/EPAA composite was characterized via X-ray diffraction analysis, X-ray photoelectron spectroscopy, and scanning electron microscopy, which confirmed that the Au nanoparticles were well dispersed on the EPAA surface. p-Nitrophenol was reduced to p-aminophenol within 5 min at room temperature, with a rate constant of 0.84 min⁻¹. Cycling measurements showed that the Au/EPAA composite achieved higher than 92% conversion. The Au/EPAA composite showed excellent performance and stability as a catalyst for the reduction of p-nitrophenol to p-aminophenol.

The Au/EPAA composite demonstrated excellent performance and stability as a catalyst for the reduction of p-nitrophenol to p-aminophenol.

Recyclable Magnetic Cu/CuFe2O4 Nanocomposites for the Rapid Degradation of 4-NP

Magnetic Cu/CuFe2O4 nanocomposites were prepared by the one-pot thermal decomposition of acetylacetone compounds. Adjusting the molar ratios of Fe to Cu was used to control the content of Cu in the synthetic process. XRD, TEM, XPS and UV-Vis were employed to reveal detailed structural and catalytic activities of Cu/CuFe2O4 nanocomposites. Magnetic measurements demonstrated that Cu/CuFe2O4 nanocomposites possessed a considerable magnetic saturation. Cu/CuFe2O4 nanocomposites showed superb efficiency in the degradation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). 4-NP could be reduced by Cu/CuFe2O4 nanocomposites within 40 s in the attendance of NaBH4. Cu nanocrystals played an indispensable rose in the enhancement of catalytic performance. The synergistic effect of Cu and CuFe2O4 nanocrystals achieved the high-efficiency catalytic reduction for 4-NP. After six recycling experiments, the efficiency of Cu/CuFe2O4 nanocomposites was almost stable. Our work advances a straightforward strategy to synthesize efficient and recoverable Cu/CuFe2O4 nanocomposites, which has promising utilizations in the purifying of nitrophenolic contamination.

Facile Synthesis of Fe3O4@Tannic Acid@Au Nanocomposites as a Catalyst for 4-Nitrophenol and Methylene Blue Removal

A facile, cost-effective, and eco-friendly method was proposed to synthesize Fe₃O₄@tannic acid@Au nanocomposites (Fe₃O₄@TA@Au). First, Fe₃O₄ nanoparticles with diameters of 20 and 200 nm were synthesized by co-precipitation and solvothermal methods, respectively. Gold nanoparticles were deposited on magnetic Fe₃O₄ through tannic acid-metal-polymer intermediate-layer-mediated reductions. The catalytic activities of the as-prepared Fe₃O₄@TA@Au were investigated by spectroscopically monitoring the reduction of 4-nitrophenol (4-NP) and methylene blue (MB), which could be achieved within several minutes with an excess of NaBH₄. The impact of the Fe₃O₄ size on the overall catalytic ability of the Fe₃O₄@TA@Au was systematically studied. The reaction rate constants of the Fe₃O₄-20 nm@TA@Au for 4-NP and MB reduction were 0.432 and 0.543 min^-1, respectively. For the Fe₃O₄-200 nm@TA@Au nanocomposite, the optimized reaction rate constants for 4-NP and MB reduction were 3.09 and 0.441 min^-1, respectively. Due to magnetic separation, the Fe₃O₄@TA@Au could be easily harvested and recycled. After five recycling cycles, the catalytic ability remained over 90%, and the recycling process could be completed in several minutes, highlighting its potential as a catalyst for 4-NP and MB removal.

A label-free electrochemical magnetic aptasensor based on exonuclease III-assisted signal amplification for determination of carcinoembryonic antigen

A novel label-free and exonuclease III (Exo III)-assisted signal amplification electrochemical aptasensor was constructed for the determination of carcinoembryonic antigen (CEA) via magnetic field-induced self-assembly of magnetic biocomposites (Fe₃O₄@Au NPs-S1-S2-S3). The magnetic biocomposites were acquired by modifying double-stranded DNA (S1-S2-S3) on the surface of Fe₃O₄@Au nanoparticles (Fe₃O₄@Au NPs). Among them, Fe₃O₄@Au NPs were used as carriers for magnetic separation, thiolated single-stranded DNA (S1) provided signal sequence, CEA aptamer (S2) worked as a recognition element, and complementary strand (S3) was used to form double strands. In the presence of CEA, S2 bonded with CEA competitively; the exposed S1 could not be cleaved since Exo III was inactive against ssDNA. The G-quadruplex/hemin complexes finally formed with the existence of K⁺, and the high electrochemical signal of G-quadruplex/hemin complexes was recorded by differential pulse voltammetry (DPV) at - 0.6 V. Conversely, in the absence of CEA, dsDNA was cleaved from the 3' blunt end by Exo III; the disappearance of G-rich sequence blocked the generation of the signal. This method exhibited good selectivity and sensitivity for the determination of CEA; the linear range was from 0.1 to 200 ng mL^-1 and the limit of detection was 0.4 pg mL^-1. Graphical abstract.

A Novel Au@Cu2O-Ag Ternary Nanocomposite with Highly Efficient Catalytic Performance: Towards Rapid Reduction of Methyl Orange Under Dark Condition

Au@Cu2O core-shell nanocomposites (NCs) were synthesized by reducing copper nitrate on Au colloids with hydrazine. The thickness of the Cu2O shells could be varied by adjusting the molar ratios of Au: Cu. The results showed that the thickness of Cu2O shells played a crucial role in the catalytic activity of Au@Cu2O NCs under dark condition. The Au@Cu2O-Ag ternary NCs were further prepared by a simple galvanic replacement reaction method. Moreover, the surface features were revealed by TEM, XRD, XPS, and UV-Vis techniques. Compared with Au@Cu2O NCs, the ternary Au@Cu2O-Ag NCs had an excellent catalytic performance. The degradation of methyl orange (MO) catalyzed by Au@Cu2O-Ag NCs was achieved within 4 min. The mechanism study proved that the synergistic effects of Au@Cu2O-Ag NCs and sodium borohydride facilitated the degradation of MO. Hence, the designed Au@Cu2O-Ag NCs with high catalytic efficiency and good stability are expected to be the ideal environmental nanocatalysts for the degradation of dye pollutants in wastewater.