Significantly Enhanced Crystallization of Poly(L-lactide) by the Synergistic Effect of Poly(diethylene glycol adipate) and Cellulose Nanocrystals in Their Fully Biodegradable Ternary Composite

Crystallization Behavior and Mechanical Property of Biodegradable Poly(butylene succinate-co-2-methyl succinate)/Cellulose Nanocrystals Composites

Biodegradable poly(butylene succinate-co-2-methyl succinate) (PBSMS)/cellulose nanocrystals (CNC) composites were successfully prepared at low CNC loadings with the aims of improving crystallization and mechanical properties and extending the practical application of PBSMS. CNC is finely dispersed in the PBSMS matrix without obvious aggregations. The low content of CNC obviously promoted the crystallization behavior of PBSMS under different conditions. The spherulitic morphology study revealed that CNC, as an effective heterogeneous nucleating agent, provided more nucleation sites during the melt crystallization process. In addition, the nucleation effect of CNC was quantitatively evaluated by the following two parameters, i.e., nucleation activity and nucleation efficiency. The crystal structure and crystallization mechanism of PBSMS remained unchanged in the composites. In addition, as a reinforcing nanofiller, CNC significantly increased Young's modulus and the yield strength of PBSMS. The crystallization behavior and mechanical properties of PBSMS were significantly improved by the low content of CNC, which should be interesting and essential from the perspective of biodegradable polymer composites.

Significantly Enhanced Crystallization of Poly(ethylene succinate-co-1,2-propylene succinate) by Cellulose Nanocrystals as an Efficient Nucleating Agent

Poly(ethylene succinate-co-1,2-propylene succinate) (PEPS) is a novel aliphatic biodegradable polyester with good mechanical properties. Due to the presence of methyl as a side group, the crystallization rate of PEPS is remarkably slower than that of the poly(ethylene succinate) homopolymer. To promote the potential application of PEPS, the effect of cellulose nanocrystals (CNC) on the crystallization behavior, crystalline morphology, and crystal structure of PEPS was investigated in this research with the aim of increasing the crystallization rate. CNC enhanced both the melt crystallization behavior of PEPS during the cooling process and the overall crystallization rate during the isothermal crystallization process. The crystallization rate of PEPS became faster with an increase in CNC content. The crystalline morphology study directly confirmed the heterogeneous nucleating agent role of CNC. The crystal structure of PEPS remained unchanged in the composites. On the basis of the interfacial energy, the nucleation mechanism of PEPS in the composites was further discussed by taking into consideration the induction of CNC.

Fully Biodegradable Poly(hexamethylene succinate)/Cellulose Nanocrystals Composites with Enhanced Crystallization Rate and Mechanical Property

Through a common solution and casting method, low contents of cellulose nanocrystals (CNC) reinforced biodegradable poly(hexamethylene succinate) based composites were successfully prepared for the first time. CNC homogeneously dispersed in PHS matrix at low loadings, showing no obvious aggregation. PHS/CNC composites showed high thermal stability as PHS. As a heterogeneous nucleating agent, CNC promoted the crystallization of PHS under both nonisothermal and isothermal crystallization conditions. In addition, the higher the CNC content, the faster the crystallization of PHS/CNC composites. The heterogeneous nucleating agent role of CNC was directly confirmed by the crystalline morphology study; moreover, the crystal structure of PHS remained unmodified despite the presence of CNC. As a reinforcing nanofiller, CNC also improved the mechanical property of PHS, especially the Young’s modulus and yield strength. In brief, low contents of CNC may improve both the crystallization and mechanical property of PHS, providing an easy method to tune the physical property and promote the wider application of biodegradable polymers.

Transparent films by ionic liquid welding of cellulose nanofibers and polylactide: Enhanced biodegradability in marine environments

We introduce a green and facile method to compatibilize hydrophobic polylactide (PLA) with hydrophilic cellulose nanofibers (CNF) by using ionic liquid ([DBNH][OAc]) welding with a cosolvent system (gamma-valerolactone). Such welding affords strong (230 MPa tensile strength), flexible (13% elongation at break), transparent (>90%) and defect-free CNF/PLA films. The films are biodegradable in marine environments (70% degradation in 7 weeks), facilitating the otherwise slow PLA decomposition. Physical, chemical and structural features of the films before and after welding are compared and factored in the trends observed for degradation in seawater. The results point to the possibility of PLA-based films forming a co-continuous system with nanocellulose to achieve an improved performance. The role of film morphology, hydrophobicity, and crystallinity is discussed to add to the prospects for packaging materials that simultaneously display accelerated degradability in marine environments.

Investigations on Novel Ternary Green Polymer Composite

In this study, the novel ternary green polymer composites of poly(l-lactic acid) (PLLA)/poly(ethylene adipate)/hexagonal boron nitride (PLLA/PEA/h-BN) were synthesized and prepared. The crystallization rate of the biodegradable polymer PLLA in the composite was significantly increased with the addition of PEA and functional h-BN. In ternary PLLA/PEA/h-BN composites, PEA can be used as a plasticizer, while h-BN is a functional nucleation agent for PLLA. The analysis of the isothermal crystallization kinetics by the Avrami equation shows that the rate constant k of the ternary PLLA/PEA/h-BN composite represents the highest value, indicating the highest crystallization in the ternary composite. Adding h-BN in the composite can further increase the k value and increase the crystallization rate. Polarized optical microscopy (POM) images reveal that h-BN is an effective nucleation agent that increases the nucleation density of composites. Analysis of wide-angle X-ray diffraction (WAXD) further confirmed that the crystalline structures of PLLA were unchanged by the addition of PEA and h-BN. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images show that the h-BN particles are uniformly distributed in the composite. The distribution of h-BN having a particle size of a few hundred nm causes an effective nucleation effect and promotes the crystallization of the ternary composites.