110th Anniversary: Commentary: Perspectives on Adsorption of Complex Mixtures

Does Mixed Linker-Induced Surface Heterogeneity Impact the Accuracy of IAST Predictions in UiO-66-NH2?

To move toward more energy-efficient adsorption-based processes, there is a need for accurate multicomponent data under realistic conditions. While the Ideal Adsorbed Solution Theory (IAST) has been established as the preferred prediction method due to its simplicity, limitations and inaccuracies for less ideal adsorption systems have been reported. Here, we use amine-functionalized derivatives of the UiO-66 structure to change the extent of homogeneity of the internal surface toward the adsorption of the two probe molecules carbon dioxide and ethylene. Although it might seem plausible that more functional groups lead to more heterogeneity and, thus, less accurate predictions by IAST, we find a mixed-linker system with increased heterogeneity in terms of added adsorption sites where IAST predictions and experimental loadings agree exceptionally well. We show that incorporating uncertainty analysis into predictions with IAST is important for assessing the accuracy of these predictions. Energetic investigations combined with Grand Canonical Monte Carlo simulations reveal almost homogeneous carbon dioxide but heterogeneous ethylene adsorption in the mixed-linker material, resulting in local, almost pure phases of the individual components.

Molecular Characterization of Membrane Gas Separation under Very High Temperatures and Pressure: Single- and Mixed-Gas CO2/CH4 and CO2/N2 Permselectivities in Hybrid Networks

This work illustrates the potential of using atomistic molecular dynamics (MD) and grand-canonical Monte Carlo (GCMC) simulations prior to experiments in order to pre-screen candidate membrane structures for gas separation, under harsh conditions of temperature and pressure. It compares at 300 °C and 400 °C the CO₂/CH₄ and CO₂/N₂ sieving properties of a series of hybrid networks based on inorganic silsesquioxanes hyper-cross-linked with small organic PMDA or 6FDA imides. The inorganic precursors are the octa(aminopropyl)silsesquioxane (POSS), which degrades above 300 °C, and the octa(aminophenyl)silsesquioxane (OAPS), which has three possible meta, para or ortho isomers and is expected to resist well above 400 °C. As such, the polyPOSS-imide networks were tested at 300 °C only, while the polyOAPS-imide networks were tested at both 300 °C and 400 °C. The feed gas pressure was set to 60 bar in all the simulations. The morphologies and densities of the pure model networks at 300 °C and 400 °C are strongly dependent on their precursors, with the amount of significant free volume ranging from ~2% to ~20%. Since measurements at high temperatures and pressures are difficult to carry out in a laboratory, six isomer-specific polyOAPS-imides and two polyPOSS-imides were simulated in order to assess their N₂, CH₄ and CO₂ permselectivities under such harsh conditions. The models were first analyzed under single-gas conditions, but to be closer to the real processes, the networks that maintained CO₂/CH₄ and CO₂/N₂ ideal permselectivities above 2 were also tested with binary-gas 90%/10% CH₄/CO₂ and N₂/CO₂ feeds. At very high temperatures, the single-gas solubility coefficients vary in the same order as their critical temperatures, but the differences between the penetrants are attenuated and the plasticizing effect of CO₂ is strongly reduced. The single-gas diffusion coefficients correlate well with the amount of available free volume in the matrices. Some OAPS-based networks exhibit a nanoporous behavior, while the others are less permeable and show higher ideal permselectivities. Four of the networks were further tested under mixed-gas conditions. The solubility coefficient improved for CO₂, while the diffusion selectivity remained similar for the CO₂/CH₄ pair and disappeared for the CO₂/N₂ pair. The real separation factor is, thus, mostly governed by the solubility. Two polyOAPS-imide networks, i.e., the polyorthoOAPS-PMDA and the polymetaOAPS-6FDA, seem to be able to maintain their CO₂/CH₄ and CO₂/N₂ sieving abilities above 2 at 400 °C. These are outstanding performances for polymer-based membranes, and consequently, it is important to be able to produce isomer-specific polyOAPS-imides for use as gas separation membranes under harsh conditions.

An automated multi-component gas adsorption system (MC GAS)

The knowledge gap on adsorption of complex mixtures in the literature relative to single component data represents a persistent obstacle to developing accurate process models for adsorption separations. The collection of mixed gas adsorption data is an imminent need for improved understanding of the behavior of adsorbent systems in these diverse adsorption applications. Current approaches to understanding mixture adsorption using predictive theories based on pure component adsorption experiments often fail to capture the behavior of more complex, non-ideal systems. In this work, we present an automated volumetric instrument for the measurement of mixed gas adsorption isotherms. This instrument was validated by comparison to other in-house instruments and data available in the literature, and the binary adsorption measurements were found to be thermodynamically consistent. The automation of this instrument allows for rapid collection of high-quality mixture adsorption data.