MOF-Derived Fe2O3/Nitrogen/Carbon Composite as a Stable Heterogeneous Electro-Fenton Catalyst

Heterogeneous Fenton treatment of shale gas fracturing flow-back wastewater by spherical Fe/Al2O3 catalyst

In this work, efficient Fenton strategy have been proposed for degradation of shale gas fracturing flow-back wastewater using the spherical Fe/Al2O3 supported catalyst. Prior to actual fracturing fluid treatment, the typical model wastewaters such as p-nitrophenol and polyacrylamide were employed to evaluate the catalytic properties of prepared catalyst, and then Fenton treatment of the shale gas fracturing flow-back wastewater was performed on the self-assembled catalytic degradation reactor for continuous flow purification. Results showed that under the conditions of 0.25 mol L-1 impregnating concentration, pH 4, 50 g L-1 catalyst and 0.75 mL L-1 30% H2O2, the removal efficiency of p-nitrophenol and polyacrylamide reached 74% and 61%, respectively, while the COD removal of fracturing flow-back fluid was approximately 48% with the residual 88 mg L-1 COD, meeting the emission standards of the integrated wastewater discharge standard (GB 8978-1996, COD < 100 mg L-1). This work offers new alternatives for Fenton treatment of real wastewater by efficient and low-cost supported catalysts.

Flow-through heterogeneous electro-Fenton system using a bifunctional FeOCl/carbon cloth/activated carbon fiber cathode for efficient degradation of trimethoprim at neutral pH

The synthesis of multifunctional cathode with high-efficiency and stable catalytic activity for simultaneously producing and activating H₂O₂ is an effective way for promoting the performance of heterogeneous electro-Fenton process (HEF). In addition, accelerating mass transfer by adopting a flow-through reactor is also great importance because of its better utilization of catalysts and adequate contact of the contaminant with the oxidants generated on the electrode surface. Herein, a novel flow-through HEF (FHEF) system was designed for the degradation of trimethoprim (TMP) using bifunctional cathode with a sandwich structure FeOCl nanosheets loaded onto carbon cloth (CC) and activated carbon fiber (ACF) (FeOCl/CC/ACF). The cathode exhibited excellent performance in activating H₂O₂ for the in-situ generation of hydroxyl radicals (^•OH). The electron spin resonance (ESR) measurements and radical quenching tests proved that the high production of ^•OH in the FHEF process was favorable to the high catalytic efficiency. 25 mg L^-1 TMP was entirely degraded after 60 min, with the TOC removal of 62.6% (180 min) at pH 6.8, 9.0 mA cm^-2, and flux rate 210 mL min^-1. Moreover, the degradation rate still could reach 83% (60 min) after 10 cycles without obvious valence and crystal phase changes. Simultaneously, the current utilization rate has also been greatly enhanced, with an average current efficiency of 69.9% and a low energy consumption of 0.28 kWh kg^-1. The reasonable degradation pathways for TMP were proposed based on the UPLC-QTOF-MS/MS results. Finally, the results of toxicological simulation showed a declining trend in the toxicity of the samples during TMP degradation. These results claim that the FeOCl/CC/ACF-FHEF system is an efficient and economical technology for the treatment of organic contaminants in effluents.

Advanced hematite nanomaterials for newly emerging applications

Because of the combined merits of rich physicochemical properties, abundance, low toxicity, etc., hematite (α-Fe2O3), one of the most chemically stable compounds based on the transition metal element iron, is endowed with multifunctionalities and has steadily been a research hotspot for decades. Very recently, advanced α-Fe2O3 materials have also been developed for applications in some cutting-edge fields. To reflect this trend, the latest progress in developing α-Fe2O3 materials for newly emerging applications is reviewed with a particular focus on the relationship between composition/nanostructure-induced electronic structure modulation and practical performance. Moreover, perspectives on the critical challenges as well as opportunities for future development of diverse functionalities are also discussed. We believe that this timely review will not only stimulate further increasing interest in α-Fe2O3 materials but also provide a profound understanding and insight into the rational design of other materials based on transition metal elements for various applications.

Removal of pharmaceutical and personal care products (PPCPs) by MOF-derived carbons: A review

Nowadays, the increasing demand for pharmaceuticals and personal care products (PPCPs) has resulted in the uncontrolled release of large amounts of PPCPs into the environment, which poses a great challenge to the existing wastewater treatment technologies. Therefore, novel materials for efficient treatment of PPCPs need to be developed urgently. MOF-derived carbons (MDCs), have many advantages such as high mechanical strength, excellent water stability, large specific surface area, excellent electron transfer capability, and environmental friendliness. These advantages give MDCs an excellent ability to remove PPCPs. In this review, the effects of different substances on the properties and functions of MDCs are discussed. In addition, representative applications of MDCs and composites for the removal of PPCPs in the field of adsorption and catalysis are summarized. Finally, the future challenges of MDCs and composites are foreseen.

Discovery of a low-temperature Fe2O3 reduction route to Fe with carbon via Fe-MOF-74 decomposition

Fe₂O₃ reduction to Fe with carbon requires a high temperature of 1200 °C in a blast furnace process. We have discovered a novel low-temperature reduction route from γ-phase Fe₂O₃ to Fe with carbon. The reduction temperature was 430 °C, which is the lowest recorded up to now.

Controllable synthesis of magic cube-like Ce-MOF-derived Pt/CeO2 catalysts for formaldehyde oxidation

Controllable synthesis of MOFs with desired structures is of great significance to deepen the understanding of the crystal nucleation-growth mechanism and deliver unique structural features to their derived metal oxides with target catalytic applications. In this study, NH₂-Ce-BDC with morphology similar to a second-order magic cube (mc) is facile synthesized via H⁺ mediation in nucleation and growth stages. The pertinent variables that can greatly influence the formation of magic cube-like structures (MCS) were investigated, in which the concentric diffusion field was found to be one of the key factors. Upon calcination, the derived CeO₂ inherits unique gullies and grooves located on the pristine MOFs surface, which is quite useful for atomic layer deposition (ALD) of platinum (Pt) nanoparticles because of strong interaction with MOF-derived CeO₂ (mc-CeO₂). XPS, H₂-TPR, Raman, and in situ DRIFTS characterization results show that there is a stronger interaction between Pt and mc-CeO₂ in mc-Pt/CeO₂ compared with c-Pt/CeO₂ that is derived from the well-developed cubic Ce-MOFs. Furthermore, Pt²⁺ ions, hydroxyl oxygen, and oxygen defects in mc-Pt/CeO₂ account highly for exemplary catalytic activity toward HCHO oxidation.

Trimetallic carbon-based catalysts derived from metal-organic frameworks for electro-Fenton removal of aqueous pesticides

Pesticide overuse has posed a threat to agricultural community as well as aquatic animals. Heterogeneous electro-Fenton (HEF) processes have received considerable attention for aqueous contaminants removal, and metal-organic frameworks (MOFs) serve as promising templates for fabrication of carbon-based HEF catalysts with low Fe leaching and enhanced stability. Herein, multimetallic MOF-derived HEF catalysts CMOFs@PCM have been demonstrated as efficient and stable HEF catalysts for aqueous pesticide degradation and mineralization. The porous carbon monolith (PCM) substrate effectively catalyzed 2-electron oxygen reduction reaction (ORR) over the pH range of 4-10 to in situ generate H₂O₂, which was then activated by the anchored Fe₃O₄, Fe₃C and NiO into OH for pesticide degradation. Fe₈Al₇Ni₅-CMOF@PCM achieved over 90% napropamide degradation within 60 min in the pH range of 4-10, and 96% degradation at neutral condition, 39% higher than monometallic CMIL-88(Fe)@PCM. Meanwhile, the embedded NiO and γ-Al₂O₃ showed synergistic effect in promoting the catalytic activity of Fe sites, resulting in substantially enhanced performance of trimetallic Fe_xAl_yNi_z-CMOF@PCM compared to the monometallic counterparts. On the other hand, the unique core-shell structure and Fe₃C interlayer formed by co-pyrolyzing Fe-containing MOFs-NH₂ with PCM greatly minimized the metal leaching and enhanced the stability of the electrocatalysts.

Derivatives of metal-organic frameworks for heterogeneous Fenton-like processes: From preparation to performance and mechanisms in wastewater purification - A mini review

Organic pollution is an ever-growing issue in aquatic environment, Fenton-like processes have gained widespread acceptance due to their high oxidative potential and environmental compatibility. Derivatives of metal-organic frameworks (MOFs) are emerging heterogeneous Fenton-like catalysts, which have advantages of large surface area, diversity of structures, and abundant active sites. This work focuses on the recent advances in MOFs derivatives including metal compounds and metal incorporated carbons for Fenton-like processes. First, preparation strategies, structures and compositions are introduced. And then, the removal of organic pollutant in Fenton, electro-Fenton, and photo-Fenton process catalyzed by MOFs derivative is summarized, respectively. The contents particularly devote efforts to build connections among preparation, structures, compositions, and performance. Furthermore, the mechanisms of improving performance are discussed in detail. Finally, the perspectives of MOFs derivatives toward Fenton-like applications are proposed.

S-doped MIL-53 as efficient heterogeneous electro-Fenton catalyst for degradation of sulfamethazine at circumneutral pH

The reduced S-modified MIL-53(Fe) was prepared by sulfurizing MIL-53(Fe) at low temperature, which was an efficient electro-Fenton catalyst at wide pH range (3-9) for sulfamethazine (SMT) degradation. The best temperature and MIL-53(Fe)/S ratio were 350 °C and 1:2, at which the BET surface area was much enlarged. The MIL-53(Fe) surface was etched by S to many 2D nanosheets with the thickness of ~50 nm, while S_2-2 replaced OH^- to coordinate with Fe²⁺ and increased the Fe²⁺ content, which improved the catalytic performance. Even at initial pH of 7.0, the SMT removal was 95.8%, and the rate constant (k) in the Hetero-EF process was 16-folds of that in the Homo-EF process. The turnover frequency (TOF_d) value of MIL-53(Fe)/S(1:2)-350 was 0.48 L g^-1 min^-1, which was 6.8 times that of commercial FeS₂. The S_2-2in catalyst adjusted the pH superfast, and promoted the generation of Fe²⁺ and thus efficiently activating H₂O₂ to form surface ^·OH, which was verified to be the main radical by EPR and radical scavenger experiments. This catalyst showed promising prospect for environmental application and could be regenerated by sulfidation method. S-doped MIL-53(Fe) was an excellent pH regulator, thus promoting promising application in Hetero-EF processes.

A comprehensive study on the heterogeneous electro-Fenton degradation of tartrazine in water using CoFe2O4/carbon felt cathode

In this study, cobalt ferrite coated carbon felt (CoFe₂O₄/CF) was synthesized by solvothermal method and applied as cathode for electro-Fenton (EF) treatment of tartrazine (TTZ) in water. The materials were characterized by SEM, XRD, FTIR, CV, and EIS to explore their physical, chemical, and electrical properties. The effects of solvothermal temperature and metal content on the TTZ removal were examined, showing that 220 °C with 2 mM of Co and 4 mM of Fe precursors were the best synthesis condition. Various influencing factors such as applied current density, pH, TTZ concentration, and electrolytes were investigated, and the optimal condition was found at 8.33 mA cm^-2, pH 3, 50 mgTTZ L^-1, and 50 mM of Na₂SO₄, respectively. By radical quenching test, , ¹O₂, and HO were recognized as the key reactive oxygen species and the reaction mechanism was proposed for the EF decolorization of TTZ using CoFe₂O₄/CF cathode. The reusability and stability test showed that the highly efficient CoFe₂O₄/CF cathode is very promising for practical application in wastewater treatment, especially for dyes and other recalcitrant organic compounds to improve its biodegradability.

Co-MOF-74 based Co3O4/cellulose derivative membrane as dual-functional catalyst for colorimetric detection and degradation of phenol

Smart nanomaterials that can simultaneously detect and eliminate contaminants in water environment are significant for health protection. To achieve such goal, Co-MOF-74 was in-situ assembled on regenerated cellulose membranes followed by calcination process, thus achieving dual-functional Co₃O₄/cellulose derivative membrane (Co₃O₄/CDM) catalyst. The Co₃O₄ morphology was readily controlled by further recrystallization of the deposited MOF precursor. Combining the high enrichment ability of cellulose membrane and outstanding peroxidase-active of Co₃O₄, the fast color reaction for phenol was accomplished within 10 min by Co₃O₄/CDM with the assistance of H₂O₂ and 4-aminoantipyrine (4-AAP). Moreover, the Co₃O₄/CDM also portrayed an excellent degradation property for phenol elimination via sulfate radical-advanced oxidation processes (SR-AOPs). The degradation efficiency of phenol reached 93% in 20 min, and the possible mineralization mechanism was proposed based on the XPS and LC-MS analysis. Thus, Co-MOF-74 derived Co₃O₄/CDM shows excellent properties in aiding the colorimetric detection and degradation of phenol in aqueous solutions.

The Surge of Metal-Organic-Framework (MOFs)-Based Electrodes as Key Elements in Electrochemically Driven Processes for the Environment

Metal–organic-frameworks (MOFs) are emerging materials used in the environmental electrochemistry community for Faradaic and non-Faradaic water remediation technologies. It has been concluded that MOF-based materials show improvement in performance compared to traditional (non-)faradaic materials. In particular, this review outlines MOF synthesis and their application in the fields of electron- and photoelectron-Fenton degradation reactions, photoelectrocatalytic degradations, and capacitive deionization physical separations. This work overviews the main electrode materials used for the different environmental remediation processes, discusses the main performance enhancements achieved via the utilization of MOFs compared to traditional materials, and provides perspective and insights for the further development of the utilization of MOF-derived materials in electrified water treatment.

Heterogeneous electro-Fenton catalysis with self-supporting CFP@MnO2-Fe3O4/C cathode for shale gas fracturing flowback wastewater

Self-supporting electrodes have triggered great interests in improving electro-Fenton (EF) system for degradation of refractory organic pollutants. In this work, a novel self-supporting carbon fiber paper (CFP) electrode modified by transition metals, e.g. Fe and Mn, was fabricated and employed as a heterogeneous EF cathode. The prepared electrode exhibited excellent degradation for a number of typical organic pollutants along with superior stability. Remarkably, a high removal efficiency was achieved in the EF treatment of shale gas fracturing flowback wastewater. Results indicated that 65.2% TOC and 74.8% COD were eliminated after 4 h degradation. The residual COD value of the real wastewater was 80 mg L^-1, meeting the emission requirement of the integrated wastewater discharge standard (COD＜100 mg L^-1) with a low specific energy consumption of 6.9kWhkg^-1COD^-1. This work demonstrates a competing alternative for efficient decontamination of real wastewater using an electro-Fenton strategy with a low-cost electrode.

Recent advances on preparation and environmental applications of MOF-derived carbons in catalysis

Carbon materials derived from metal organic frameworks (MOFs) have excellent properties of high surface area, high porosity, adjustable pore size, high conductivity and stability, and their applications in catalysis have become a rapidly expanding research field. In this review, we have summarized the synthesis strategies of MOF-derived carbons with different physical and chemical properties, obtained through direct carbonization, co-pyrolysis and post-treatment. The potential applications of derived carbons, especially monometal-, bimetal-, nonmetal-doped and metal-free carbons in organo-catalysis, photocatalysis and electrocatalysis are analyzed in detail from the environmental perspective. In addition, the improvement of catalytic efficiency is also considered from the aspects of increasing active sites, enhancing the activity of reactants and promoting free electron transfer. The function and synergy of various species of the composites in the catalytic reaction are summarized. The reaction paths and mechanisms are analyzed, and research ideas or trends are proposed for further development.

Fenton/Fenton-like processes with in-situ production of hydrogen peroxide/hydroxyl radical for degradation of emerging contaminants: Advances and prospects

Fenton processes based on the reaction between Fe²⁺ and H₂O₂ to produce hydroxyl radicals, have been widely studied and applied for the degradation of toxic organic contaminants in wastewater due to its high efficiency, mild condition and simple operation. However, H₂O₂ is usually added by bulk feeding, which suffers from the potential risks during the storage and transportation of H₂O₂ as well as its low utilization efficiency. Therefore, Fenton/Fenton-like processes with in-situ production of H₂O₂ have received increasing attention, in which H₂O₂ was in-situ produced through O₂ activation, then decomposed into hydroxyl radicals by Fenton catalysts. In this review, the in situ production of H₂O₂ for Fenton oxidation was introduced, the strategies for activation of O₂ to generate H₂O₂ were summarized, including chemical reduction, electro-catalysis and photo-catalysis, the influencing factors and the mechanisms of the in situ production and utilization of H₂O₂ in various Fenton/Fenton-like processes were analyzed and discussed, and the applications of these processes for the degradation of toxic organic contaminants were summarized. This review will deepen the understanding of the tacit cooperation between the in situ production and utilization of H₂O₂ in Fenton process, and provide the further insight into this promising process for degradation of emerging contaminants in industrial wastewater.

Quasi-MOF derivative-based electrode for efficient electro-Fenton oxidation

Developing efficient and robust materials for emerging electrodegradation of organic pollutants has attracted broad interests. In this study, a novel controlled pyrolysis approach was employed to fabricate a quasi-MOF derivative-based electrode by pyrolyzing MIL-101(Fe) anchored on a polyaniline-modified carbon fiber paper at 400 °C. The construction of the accessible Fe-O sites, and the in situ generation of Fe₃O₄ nanoparticles with graphene-like carbon layers coated, would enhance the electro-Fenton activity of the electrode, which was used as the cathode. The results showed that 100 % of 50 mg L^-1 p-nitrophenol and 52 % total organic carbon were removed in 120 min under a current density of 5 mA cm^-2, suggesting that the prepared electrode had a more efficient mineralization current efficiency and less energy consumption compared with electrodes before pyrolysis. Notably, the stability of the electrode was greatly improved, maintaining its outstanding performance even after ten runs. The plausible reaction mechanism and degradation pathway were also proposed. This new pyrolysis strategy is expected to serve as a paradigm for designing efficient electrode in electro-Fenton remediation field.

Mechanism and stability of an Fe-based 2D MOF during the photoelectro-Fenton treatment of organic micropollutants under UVA and visible light irradiation

This work reports the novel application of an Fe-based 2D metal-organic framework (MOF), prepared with 2,2'-bipyridine-5,5'-dicarboxylate (bpydc) as organic linker, as highly active catalyst for heterogeneous photoelectro-Fenton (PEF) treatment of the lipid regulator bezafibrate in a model matrix and urban wastewater. Well-dispersed 2D structures were successfully synthesized and their morphological, physicochemical and photocatalytic properties were assessed. UV/Vis PEF using an IrO₂/air-diffusion cell with an extremely low catalyst concentration (0.05 g L^-1, tenfold lower than reported 3D MOFs) outperformed electro-oxidation with electrogenerated H₂O₂, electro-Fenton and visible-light PEF. Its excellent performance was explained by: (i) the enhanced mass transport of H₂O₂ (and organic molecules) at the 2D structure, providing active sites for heterogeneous Fenton's reaction and in-situ Fe(II) regeneration; (ii) the ability of photoinduced electrons to reduce H₂O₂ to ^•OH, and Fe(III) to Fe(II); and (iii) the enhanced charge transfer and excitation of Fe-O clusters, which increased the number of electron-hole pairs. LC-QToF-MS and GC-MS allowed the identification of 16 aromatic products of bezafibrate. The complete removal of four micropollutants mixed in urban wastewater at pH 7.4 revealed the great potential of (Fe-bpydc)-catalyzed PEF process.