Highly Efficient Removal of Cr(VI) on a Stable Metal–Organic Framework Based on Enhanced H-Bond Interaction

Synthesis of a novel cost-effective double-ligand Zr-based MOF via an inverted modulator strategy towards enhanced adsorption and photodegradation of tetracycline

Developing visible-light response photocatalysts with high activity and adsorption alongside sustainability is vitally important to environmental restoration. Here, we fabricated a novel metal organic framework (MOF) with cost-effective double-ligands (fumaric acid and 2-aminoterephthalic acid as ligand precursors, denoted as MA-MOF) via a facile solvothermal method. Specifically, crystalline [Zr6O4(OH)4(fumarate)6] (MOF-801) can be only formed with monocarboxylic acids as modulators. Therefore, in the construction of crystalline double-ligand MA-MOF, the absence of monocarboxylic acid modulators successfully prevents the formation of crystalline MOF-801. Instead, the crystalline double-ligand MA-MOF is formed. Properties of MA-MOFs including the surface area, porosity, charge transfer resistance, and energy level position can be adjusted via altering the ratio of ligands. The optimal sample, MA-MOF2 (prepared with a molar ratio of fumaric acid and 2-aminoterephthalic acid being 2:1), shows a total 94.6% removal of tetracycline via adsorption and photodegradation, far exceeding the corresponding single-ligand counterparts. This work proposes an innovative inverted modulator strategy for constructing double-ligand MOFs.

Superior comprehensive performance of modified activated carbon as a hexavalent chromium adsorbent

The presence of hexavalent chromium species (CrVI) in wastewater from manufacturing industries such as electroplating and leather production can pose serious health hazards. To address these concerns, this study developed a novel adsorbent based on activated carbon as the primary material to attract CrVI. Activated carbon has been modified with several other components to improve its comprehensive performance, including adsorption capacity, chemical stability, collectability, and reusability. Specifically, decoration with magnetite nanoparticles made it possible to collect the adsorbent magnetically and reuse it several times. On the one hand, the addition of chitosan not only increased the chemical stability of activated carbon, especially under acidic conditions, but also enhanced the Cr adsorption capacity at pH higher than 4, where adsorption of only activated carbon was significantly decreased, probably because the protonated amino groups attracted chromate anions. In addition, the co-existence of tannic acid did not increase the adsorption capacity significantly but appeared to promote the reductive adsorption of CrVI, where the reduction of CrVI means lowering the toxicity of Cr species. It was demonstrated that activated carbon modified with magnetite, chitosan, and tannic acid exhibited superior comprehensive performance that could be repeatedly used over a wide pH range as compared to the parent activated carbon.

Electrochemical reconfiguration of iron-modified Ni3S2 surface induced oxygen vacancies to immobilize sulfate for enhanced oxygen evolution reaction

There is an urgent need for highly active, durable, and low-cost electrocatalysts to overcome the shortcomings of high overpotential in the oxygen evolution reaction (OER) process. In this work, the nickel-iron hydroxysulfate rich in sulfate and oxygen vacancies (SO42-@Fe-NiOOH-Ov/NiS) is legitimately constructed. SO42-@Fe-NiOOH-Ov/NiS only requires a low overpotentials of 190 mV and 232 mV at 10 mA cm-2 and 100 mA cm-2 current densities in 1 M KOH, with excellent stability for 200 h at 100 mA cm-2 current density. In situ Raman spectroscopy and Fourier transform infrared spectroscopy demonstrated the stable adsorption of more SO42- on the surface of catalyst. Density functional theory calculations testify surface reconstruction, doped Fe and oxygen vacancies significantly reduced the adsorption energy of sulfate on the surface. More importantly, the formation of *OOH to O2 is facilitated by the highly hydrogen bonding between SO42- and *OOH, accelerating the OER process.

Exploring Synthesis Strategies and Interactions between MOFs and Drugs for Controlled Drug Loading and Release, Characterizing Interactions Through Advanced Techniques

This study explores various aspects of Metal-Organic Frameworks (MOFs), focusing on synthesis techniques to adjust pore size and key ligands and metals for crafting carrier MOFs. It investigates MOF-drug interactions, including hydrogen bonding, van der Waals, and electrostatic interactions, along with kinetic studies. The multifaceted applications of MOFs in drug delivery systems are elucidated. The morphology and structure of MOFs are intricately linked to synthesis methodology, impacting attributes like crystallinity, porosity, and surface area. Hydrothermal synthesis yields MOFs with high crystallinity, suitable for catalytic applications, while solvothermal synthesis generates MOFs with increased porosity, ideal for gas and liquid adsorption. Understanding MOF-drug interactions is crucial for optimizing drug delivery, affecting charge capacity, stability, and therapeutic efficacy. Kinetic studies determine drug release rates and uniformity, vital for controlled drug delivery. Overall, comprehending drug-MOF interactions and kinetics is essential for developing effective and controllable drug delivery systems.

Machine-learning-driven discovery of metal-organic framework adsorbents for hexavalent chromium removal from aqueous environments

HYPOTHESIS

Metal-organic frameworks (MOFs) have been widely studied for Cr(VI) adsorption in water. Theoretically, numerous MOFs can be synthesised by assembling diverse metals and ligands. However, the traditional manual experimentation for screening high-performance MOFs is resource-intensive and inefficient.

EXPERIMENTS

A screening strategy for MOFs based on machine learning was proposed for the adsorption and removal of Cr(VI) from water. By collecting the characteristics of MOFs and the experimental parameters of Cr(VI) adsorption from the literature, a dataset was constructed to predict the adsorption performance. Among the six regression models, the model trained by the extreme gradient boosted tree algorithm had the best performance and was used to simulate the adsorption and screen potential high-performance adsorbents.

FINDINGS

Structure-property analysis indicated that prepared MOF adsorbents with properties of 0.37 < largest cavity diameter < 0.71 nm, 0.18 < pore volume < 0.57 cm3/g, 412 < specific surface area < 1588 m2/g, 0.43 < void fraction < 0.62 will achieve enhanced adsorption of Cr(VI) in water. High-performance adsorbents were successfully screened using a combination of machine-learning prediction and analysis. Experiments were conducted to verify the exceptional adsorption capacity of UiO-66 and MOF-801. This method effectively identified adsorbents and accelerated the development of new MOF adsorbents for contaminant removal, providing a novel approach for the discovery of superior adsorbents.

Selective removal of Cr2O72- in aqueous solution by nonporous pure crystals of cucurbit[6]uril

Cucurbit[6]uril (Q[6]) could serve as a selective absorbent for the toxic anion Cr2O72-, which was demonstrated by the results of UV-vis, ICP, XPS, SEM, and EDS experiments. Single-crystal X-ray diffraction analysis revealed that capture capacity could be attributed to the outer-surface interactions of cucurbit[n]uril between Cr2O72- and the outer surface of Q[6].

Construction of defective zirconium-based metal-organic frameworks for enhanced removal of toxic selenite: performance and mechanism studies

The development of effective adsorbents for the adsorption and removal of toxic selenite (SeO₃^2-) from wastewater is urgently required but challenging. Herein, formic acid (FA), a monocarboxylic acid, was used as a template to construct serial defective Zr-Fumarate (Fum) -FA based on a green and facile preparation method. Physicochemical characterization shows that the defect degree of Zr-Fum-FA can be flexibly controlled by regulating the amount of FA to be added. Owing to rich defect units, the diffusion and mass transfer of guest SeO₃^2- into the channel can be boosted. Particularly, Zr-Fum-FA-6 with the most defects exhibits superior adsorption capacity (519.6 mg g^-1) and rapid adsorption equilibrium (∼200 min). The adsorption isotherms and kinetics can be well described by the Langmuir and pseudo-second-order kinetic models. Moreover, this adsorbent possesses excellent resistance towards co-existing ions, high chemical stability and good applicability in a broad pH range of 3-10. Thus, our study provides a promising adsorbent for SeO₃^2-, and more importantly, it proposes a strategy for rationally tailoring the adsorption behavior of adsorbents via defect construction.

The one-step synthesis of a novel metal-organic frameworks for efficient and selective removal of Cr(VI) and Pb(II) from wastewater: Kinetics, thermodynamics and adsorption mechanisms

The removal of Cr(VI) and Pb(II) from wastewater is one of the methods to ensure water safety. However, it is still a difficult point to design efficient and selective adsorbent. In this work, Cr(VI) and Pb(II) were removed from water by a new metal-organic frameworks material (MOF-DFSA) with numerous adsorption sites. The max adsorption capacities of MOF-DFSA were 188.12 mg/g for Cr(VI) after 120 min and 349.09 mg/g for Pb(II) within 30 min. MOF-DFSA showed good selectivity and reusability after four cycles. The adsorption of MOF-DFSA was an irreversible process with multi-site coordination, and an active site adsorbed 1.798 Cr (VI) and 0.395 Pb (II). Kinetic fitting showed that the adsorption was chemisorption and surface diffusion was the main limiting step. Thermodynamic showed that Cr(VI) adsorption was enhanced at higher temperatures by spontaneous processes while Pb(II) was weakened. The chelation and electrostatic interaction of the hydroxyl and nitrogen-containing groups of MOF-DFSA with Cr(VI) and Pb(II) is the predominant mechanism, while the reduction of Cr(VI) also play an important role in adsorption. In conclusion, MOF-DFSA was a sorbent that can be used for the removal of Cr(VI) and Pb(II).

Robust DUT-67 material for highly efficient removal of the Cr(VI) ion from an aqueous solution

Robust DUT-67 was synthesized by the hydrothermal method and characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). To systematically study the removal of Cr(VI) ion by DUT-67, single-factor, competition ion, material regeneration, kinetic, and thermodynamic experiments were designed. The experimental results show that DUT-67 had a maximum removal rate of 96.1% and a maximum adsorption capacity of 105.42 mg g^-1 with material regeneration and outstanding selective adsorption. In addition, the process of removal of the Cr(VI) ion from an aqueous solution by DUT-67, which accorded with the pseudo-second-order kinetics model and Langmuir model, was studied, and its adsorption mechanism was reasonably explained by the theoretical calculation.

The state of the art review on photocatalytic Cr(VI) reduction over MOFs-based photocatalysts: From batch experiment to continuous operation

This state of the art review presented the photocatalytic reduction from highly toxic Cr(VI) to lowly toxic Cr(III) with metal-organic frameworks (MOFs) and their composites. The construction of composites facilitated the transportation of the photo-induced charges to enhance the Cr(VI) reduction, in which the corresponding mechanisms were clarified by both experimental tests and DFT calculations. The immobilized MOFs onto some substrates accomplished continuous operations toward Cr(VI) reduction even under real solar light. As well, the environmental applications of the Cr(VI) reduction were analyzed, in which the influence factors toward the Cr(VI) reduction were clarified. This review reported that a big breakthrough was achieved from the batch experiment to the continuous operation for Cr(VI) reduction, in which MOFs demonstrated a bright prospective in the field of photocatalytic Cr(VI) reduction.

Preparation of Highly Stable DUT-52 Materials and Adsorption of Dichromate Ions in Aqueous Solution

Highly stable DUT-52 materials were synthesized by the hydrothermal method and well-characterized by X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and X-ray photoelectron spectroscopy (XPS). In order to systematically study the adsorption of dichromate ions in aqueous solution by the DUT-52 materials, a single factor experiment, kinetic experiment, thermodynamic experiment, competition ion experiment, and material regeneration experiment were designed. Based on the H-bond interaction between the dichromate ions and the H atoms of a NDC^2- ligand, the DUT-52 materials showed a maximum removal rate of 96.4% and a maximum adsorption capacity of 120.68 mg·g^-1 with excellent selective adsorption and material regeneration. In addition, the process of adsorption of dichromate ions by the DUT-52 materials is in accordance with the pseudo second-order kinetics and Langmuir models, and the adsorption mechanism and the important role of the H-bond interaction were reasonably explained using the XPS pattern and theoretical calculation. Accordingly, DUT-52 can be regarded as a multifunctional material for efficiently removing dichromate ions from the wastewater.

Metal-organic frameworks/alginate composite beads as effective adsorbents for the removal of hexavalent chromium from aqueous solution

Industrial waste discharge comprising heavy metals into potable water bodies induces many health hazards. This study investigates the role of metal-organic frameworks (MOFs) doped alginate beads (MOFs@ABs) as potential adsorbents for Cr(VI). Effects of pH, stirring rate, temperature, initial chrome concentration, and particles dosage on Cr(VI) adsorption are studied to evaluate adsorption ability of UiO-66@ABs for Cr(VI) removal from aqueous solution. The adsorption kinetics follows pseudo second order and the equilibrium isotherm is consistent with Langmuir isotherm model. The maximum adsorption capacity of UiO-66@ABs calculated from the model conforms to the experimental results. The desorption experiment of Cr(VI) adsorbed UiO-66@ABs (82%) demonstrates satisfactory regeneration efficiency. Based on our findings and comparative controlled experiments, the superiority of UiO-66@ABs promises their potential application in Cr(VI) removal from wastewater.

Advanced applications of Zr-based MOFs in the removal of water pollutants

The global water pollution is caused by the increase of industrial and agricultural activities, which have produced various toxic pollutants. Pollutants in water generally consist of metal ions, pharmaceuticals and personal care products (PPCPs), oil spills, organic dyes, and other organic pollutants. Amongst the adsorbents that have been developed to deal with pollutants in water, Zr-based metal-organic frameworks (MOFs) have drawn scientists' great attention due to their excellent stability and adjustable functionalization. Herein, the present review article introduces the synthetic methods of functionalized Zr-based MOFs and summarizes their applications in water pollution treatment. It also clarifies the interactions and removal mechanisms between pollutants and Zr-based MOFs. The use of these MOFs with eminent adsorption ability and recycling performance have been discussed in detail. Zr-based MOFs also face some challenges such as high cost, lack of real water environment applications, selective removal of pollutants, and low ability to remove composite pollutants. Future research should focus on addressing these issues. Although there is still a blank of the practical utility of Zr-based MOFs on a commercial scale, the research reported to date clearly shows that they are very promising materials for the water treatment.

Removal of Berberine from Wastewater by MIL-101(Fe): Performance and Mechanism

The water contamination from pharmaceuticals and personal care products (PPCPs) has attracted worldwide attention in recent years because of its threat to public health. Berberine is a typical anti-inflammatory medicine and berberine wastewater is difficult to be treated due to its high toxicity, poor biodegradability, and high acidity. Metal-organic frameworks would be a good choice to remove berberine from wastewater due to its advantages of high specific surface area, ultrahigh porosity, and structural and functional tunability. In this study, MIL-101(Fe) was synthesized and used for the removal of berberine from water. Experimental results indicated that MIL-101(Fe) showed promising characteristics when berberine was adsorbed in acidic wastewater. The high concentration of chloride in berberine wastewater could promote the adsorption of berberine by MIL-101(Fe). Fitting of batch equilibrium data showed that MIL-101(Fe) had a maximum adsorption capacity of 163.93 mg/g for berberine removal at pH 7, and the berberine sorption on MIL-101(Fe) followed the pseudo-second-order model. Furthermore, the associate mechanism for berberine removal was proposed by characterizing the material and theoretical calculation. The X-ray power diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis showed that no chemical reaction occurred during the adsorption of berberine by MIL-101(Fe). Also, the theoretical calculation results indicated that π-π interactions may play the main role in the adsorption of berberine onto MIL-101(Fe). The findings of this study suggest that MIL-101(Fe) is a promising sorbent for berberine removal from wastewater.

Adsorption Separation of Cr(VI) from a Water Phase Using Multiwalled Carbon Nanotube-Immobilized Ionic Liquids

Three types of multiwalled carbon nanotubes (MWCNTs, MWCNTs-OH, and MWCNTs-COOH) were used as carriers and five types of ionic liquids (ILs) were immobilized on each carrier by an impregnation method. Boehm titration, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, specific surface area analysis by the Brunauer-Emmett-Teller method, and thermogravimetric analysis were performed to investigate [C4mim]HSO₄ adsorption by the MWCNTs. The MWCNT-immobilized IL was used for Cr(VI) removal from a water phase. The adsorption properties of MWCNTs-COOH-immobilized [C4mim]HSO₄ were investigated by single-factor analysis. The results showed that the Cr(VI) removal rate was 52.14% and the adsorption capacity was 31.29 mg/g. The optimum adsorption conditions were as follows: initial Cr(VI) concentration, 60 mg/L; adsorbent dosage, 50 mg; pH 2.0; adsorption temperature 40 °C; and adsorption time, 200 min. Adsorption isotherm data fitted the Freundlich model, which indicates that the adsorption process was in line with the multimolecular layer adsorption theory. The Cr(VI) adsorption behaviors of the three adsorbents were consistent with a pseudo-second-order dynamic model. Thermodynamic analysis of the reaction systems was also performed. The Cr(VI) removal rates of MWCNTs-3, MWCNTs-OH-3, and MWCNTs-COOH-3 were 27.97, 9.39, and 7.34% lower than the initial removal rates after five cycles.

Highly effective removal of antibiotics from aqueous solution by magnetic ZnFe2O4/activated carbon composite

Water pollution from antibiotics has attracted a lot of attention for its serious threat to human health. In this study, a magnetic adsorbent (zinc ferrite/activated carbon (ZnFe₂O₄/AC) was synthesized via microwave method to effectively remove gemifioxacin mesylate (GEM) and moxifloxacin hydrochloride (MOX). Based on the porosity of AC and the magnetism of ZnFe₂O₄, the resulting ZnFe₂O₄/AC has high adsorption capacities and can be easily separated from the solid-liquid system via a magnetic field. The largest adsorption capacities for GEM and MOX can reach up to 433.4 mg g^-1 and 388.8 mg g^-1, respectively, higher than those of reported adsorbents such as MIL-101 and MOF-808. Fastest adsorptions of GEM and MOX were found at 5 min, and solution pH and coexisting salts do not have a significant influence on the adsorption process. The adsorption mechanism analysis indicates that electrostatic interaction and H-bond interaction contribute to the effective adsorption.