Prussian Blue Decoration on Polyacrylonitrile Nanofibers Using Polydopamine for Effective Cs Ion Removal

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

Rapid separation of the low concentration Pd from Pd-Pt coexisting systems: Cyano-group's monomer-specific affinity

Rapid separation of low concentration palladium (Pd) from Pd-Platinum (Pt) coexisting systems remains a formidable challenge, primarily due to the undifferentiated substitution of ligands in Pd/Pt complexes by adsorption sites. The development of an adsorbent featuring monomer-specific affinity adsorption sites for Pd/Pt could mitigate this drawback. Herein, Manganese hexacyanoferrate (MnHCF) possessing the sensitivity and specificity to Pd ions (Pd(II)) was synthesized via the facile co-precipitation method. MnHCF could rapidly and selectively capture 90.30 % of Pd(II) from a 10 ppm Pd-Pt coexisting system within just 5 min. Spectroscopic analyses and density functional theory (DFT) calculations indicated that cyano-group (CN) in MnHCF exhibited the monomer-specific affinity for targeted capturing Pd via the direct and strong coordination interaction (Fe-CN-PdCl2), which was co-determined by the electron-losing of C (0.06 e) and N (0.07 e) atom. At the same time, CN could neither react directly with the fully coordinated [PtCl6]2- species nor substitute the Cl- ligand, both of which contributed to the non-adsorption of Pt, thus triggering the Pd-Pt separation. This study provides a promising candidate adsorbent for practical applications in platinum group metals recovery by the design of adsorption sites with monomer-specific affinity.

Efficient removal of cesium ions using Prussian blue loaded on magnetic porous biochar synthesized by one-step calcination

Prussian blue (PB) is widely used for the selective removal of radioactive cesium ions (Cs+) from aqueous solutions. Due to its small size and easy dispersion in water, PB requires a carrier that is both inexpensive and easily separable. Magnetic porous biochar (MPBC) was formed by activating starch with FeCl3 through a one-step calcination method. MPBC can be used as a carrier for Prussian blue, which is easily separated from the solution. This composite material (PB/MPBC) has a rich pore structure and maintains effective surface area, which can facilitate the penetration of Cs+ into the adsorbent. Besides, PB/MPBC exhibits high selectivity and good adsorption capacity achieving a large removal capacity of 101.43 mg/g. Thus, this study provides a novel approach for preparing composites with efficient removal of Cs+.

Tannic acid-assisted in-situ interfacial formation of Prussian blue-assembled adsorptive membranes for radioactive cesium removal

There is a growing interest in advanced materials that can effectively treat wastewater contaminated with radioactive cesium (¹³⁷Cs), which is an extremely hazardous material. Here, we report a new class of Cs-adsorptive membranes compactly assembled with Cs-adsorptive Prussian blue (PB) particles. The PB particle assembly was formed via an in-situ interfacial reaction between two PB precursors in the presence of tannic acid (TA) as a binder on a porous support. While the interfacial reaction enabled the formation of a defect-less PB network, TA enhanced the PB-PB and PB-support compatibilities, consequently producing a uniform, densely packed PB assembly near the support surface. The fabricated TA-assisted PB membrane (PB/TA-M) synergistically rejected Cs via a combination of adsorption and membrane filtration, although adsorption predominantly determined Cs rejection initially. Hence, the PB/TA-M membrane showed considerably higher Cs removal performance than commercial nanofiltration (NF) and reverse osmosis (RO) polyamide (PA) membranes for a sufficiently long operation time. Furthermore, the PB/TA-M membrane displayed excellent radioactive ¹³⁷Cs removal performance, significantly exceeding those of commercial NF and RO PA membranes due to its higher radiation stability, indicating its viability for application in treating actual radioactive wastewater.

Highly selective adsorption and lattice process of cesium by cubic cyanide-based functional materials

Cesium (Cs) is a byproduct of nuclear bombs, nuclear weapons testing, and nuclear fission in nuclear reactors. Cs can enter the human body through food or air and cause lasting damage. Highly efficient and selective removal of ¹³⁷Cs from low-level radioactive effluents (LLREs), which contain many radionuclides and dissolved heavy metal species, is imperative for minimizing LLRE volume, and facilitating their final disposal. Prussian blue analogs (PBAs) have received much attention as materials for the removal of radioactive Cs because of their affinity for adsorbing Cs⁺. In this study, an inexpensive and readily available cyanide-based functional material (PBA_Cu) exhibiting high efficiency and excellent selectivity toward Cs capture was designed through a facile low-temperature co-precipitation process. Nano-PBA_Cu, crystallizing in the cubic space group (Fm-3m (225)), has an average pore size of 6.53 nm; consequently, PBA_Cu can offer abundant atomic occupation sites for capturing and incorporating Cs. Here, the pseudo-second-order kinetic model and Langmuir model fitted well with the adsorption of Cs ⁺ on PBA_Cu, with a maximum capture capacity of 95.75 mg/g within 5 min, confirming that PBA_Cu could rapidly capture Cs ions. PBA_Cu strongly and selectively interacted with Cs even in a simulant containing large Na⁺, NH₄⁺, Ca²⁺, and Mg²⁺ ion concentrations in an aqueous solution. The process of Cs ⁺ adsorption by cyanide-based functional crystals was confirmed to involve the entry of Cs⁺ into cyanide-based functional crystals to replace K⁺ and finally achieve the lattice incorporation of Cs. The current results broaden the lattice theory of radionuclide Cs removal and provide a promising alternative for the immobilization of Cs from radioactive wastewater.

Fabrication of a porous polyacrylonitrile nanofiber adsorbent for removing radioactive 60Co

A Co2+ adsorbent was prepared using electrospun porous polyacrylonitrile (PAN) nanofibers, featuring easy recovery for reuse compared with a nanoparticle-based adsorbent. As an efficient ligand for Co2+, ethylenediaminetetraacetic acid (EDTA) was introduced on the surface of porous PAN nanofibers with the aid of a branched polyethyleneimine (PEI) linker to obtain an adsorbent with carboxylic acid groups. On the adsorbent surface, the carboxylic acid and amine groups from EDTA could adsorb Co2+ via ion exchange and chelation, and amine groups from PEI that remained after EDTA functionalization played a role in coordinating Co2+. The amine and carboxylic acid groups were simultaneously involved in the adsorption on the surface, making it possible to remove Co2+ over a wide pH range. An investigation of the adsorption isotherms and kinetics of the nanofibrous adsorbent indicated that monolayer chemisorption was achieved with a maximum Co2+ adsorption capacity of 8.32 mg/g. In addition, radioactive 60Co was efficiently removed by the adsorbent with a removal extent of more than 98%. Considering the easy separation from Co2+ solution and regeneration of the nanofibrous adsorbent and its availability in a wide pH range, the adsorbent has great advantages in practical applications.

Cesium ion adsorption and desorption on electrospun mesoporous silica nanofibers immobilized with Prussian blue

To fabricate an efficient Cs ion adsorbent and prevent unexpected loss of Prussian blue (PB) colloidal particles during use, PB was immobilized on the surface of electrospun mesoporous silica nanofibers (MSFs) via a newly developed method of double exposure to Fe (III) ions. To introduce PB on MSFs, the MSFs were functionalized with ethylenediamine moiety to bind to Fe (III) ions, which would firmly anchor PB. MSFs were pretreated with Fe (III) ions and exposed to K₄ [Fe(II) (CN)₆] to form PB. We found that this process did not provide a sufficient PB amount on the MSFs. To increase the PB amount, after initial PB formation, the MSFs were treated with Fe (III) ions again so that the unreacted K₄ [Fe(II) (CN)₆] remaining on the MSFs could become PB. An investigation of the adsorption isotherms and kinetics of the nanofibrous adsorbent indicated that monolayer chemisorption had occurred. The maximum Cs ion adsorption capacity using the method of double exposure to Fe (III) ions was determined to be 14.66 mg/g, which was higher by a factor of 2.24 than the case that was not prepared by this method. Cs ions were selectively adsorbed over other cations and could be removed in both acidic and basic conditions, presumably because of the robust MSFs.

Prussian Blue: A Safe Pigment with Zeolitic-Like Activity

Prussian blue (PB) and PB analogues (PBA) are coordination network materials that present important similarities with zeolites concretely with their ability of adsorbing cations. Depending on the conditions of preparation, which is cheap and easy, PB can be classified into soluble PB and insoluble PB. The zeolitic-like properties are mainly inherent to insoluble form. This form presents some defects in its cubic lattice resulting in an open structure. The vacancies make PB capable of taking up and trapping ions or molecules into the lattice. Important adsorption characteristics of PB are a high specific area (370 m2 g-1 determined according the BET theory), uniform pore diameter, and large pore width. PB has numerous applications in many scientific and technological fields. PB are assembled into nanoparticles that, due to their biosafety and biocompatibility, can be used for biomedical applications. PB and PBA have been shown to be excellent sorbents of radioactive cesium and radioactive and nonradioactive thallium. Other cations adsorbed by PB are K+, Na+, NH4+, and some divalent cations. PB can also capture gaseous molecules, hydrocarbons, and even luminescent molecules such as 2-aminoanthracene. As the main adsorptive application of PB is the selective removal of cations from the environment, it is important to easily separate the sorbent of the purified solution. To facilitate this, PB is encapsulated into a polymer or coats a support, sometimes magnetic particles. Finally, is remarkable to point out that PB can be recycled and the adsorbed material can be recovered.

Selective adsorption of sodium dodecylbenzenesulfonate from a Cs ion mixture by electrospun mesoporous silica nanofibers

Sodium dodecylbenzenesulfonate (SDBS) is commonly used to remove radioactive nuclides such as Cs ions during decontamination of shut-down nuclear power plants. Potential environmental problems still remain because of the incomplete removal of large amounts of SDBS from radioactive liquid waste. For the first time, mesoporous silica nanofibers (MSFs) were fabricated for an efficient SDBS separation. MSFs were prepared by electrospinning using tetraethyl orthosilicate, a surfactant, and a template polymer; the product had a large surface area, a high pore volume, and a uniform pore size distribution. The internal pores or external surface were modified with quaternary ammonium salt, providing affinity to water and an electrostatic interaction with SDBS. The MSF-based adsorbent had excellent adsorption ability for SDBS (158.98 mg/g) over conventional adsorbents. In addition, the MSF-based adsorbent could selectively adsorb SDBS from a mixed solution of SDBS and Cs ions. Judging from the Freundlich pseuso second-order kinetic adsorption, the adsorption isotherm indicated that the SDBS adsorption was a kind of multilayer physisorption.