General Strategy to Fabricate Metal-Incorporated Pyrolysis-Free Covalent Organic Framework for Efficient Oxygen Evolution Reaction

Flexible Hydrazone-Linked Metal-Covalent Organic Frameworks with Copper Clusters for Efficient Electrocatalytic Oxygen Evolution Reaction

Despite the challenges associated with the synthesis of flexible metal-covalent organic frameworks (MCOFs), these offer the unique advantage of maximizing the atomic utilization efficiency. However, the construction of flexible MCOFs with flexible building units or linkages has rarely been reported. In this study, novel flexible MCOFs are constructed using flexible building blocks and copper clusters with hydrazone linkages. The heterometallic frameworks (Cu, Co) are prepared through the hydrazone linkage coordination method and evaluated as catalysts for the oxygen evolution reaction (OER). Owing to the spatial separation and functional cooperation of the heterometallic MCOF catalysts, the as-synthesized MCOFs exhibited outstanding catalytic activities with an overpotential of 268.8 mV at 10 mA cm-2 for the OER in 1 M KOH, which is superior to those of the reported covalent organic frameworks (COFs)-based OER catalysts. Theoretical calculations further elucidated the synergistic effect of heterometallic active sites within the linkages and frameworks, contributing to the enhanced OER activity. This study thus introduces a novel approach to the fundamental design of flexible MCOF catalysts for the OER, emphasizing their enhanced atomic utilization efficiency.

Rational Design of Organic Electrocatalysts for Hydrogen and Oxygen Electrocatalytic Applications

Efficient electrocatalysts are pivotal for advancing green energy conversion technologies. Organic electrocatalysts, as cost-effective alternatives to noble-metal benchmarks, have garnered attention. However, the understanding of the relationships between their properties and electrocatalytic activities remains ambiguous. Plenty of research articles regarding low-cost organic electrocatalysts started to gain momentum in 2010 and have been flourishing recently though, a review article for both entry-level and experienced researchers in this field is still lacking. This review underscores the urgent need to elucidate the structure-activity relationship and design suitable electrode structures, leveraging the unique features of organic electrocatalysts like controllability and compatibility for real-world applications. Organic electrocatalysts are classified into four groups: small molecules, oligomers, polymers, and frameworks, with specific structural and physicochemical properties serving as activity indicators. To unlock the full potential of organic electrocatalysts, five strategies are discussed: integrated structures, surface property modulation, membrane technologies, electrolyte affinity regulation, and addition of anticorrosion species, all aimed at enhancing charge efficiency, mass transfer, and long-term stability during electrocatalytic reactions. The review offers a comprehensive overview of the current state of organic electrocatalysts and their practical applications, bridging the understanding gap and paving the way for future developments of more efficient green energy conversion technologies.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

Composite materials based on covalent organic frameworks for multiple advanced applications

Covalent organic frameworks (COFs) stand for a class of emerging crystalline porous organic materials, which are ingeniously constructed with organic units through strong covalent bonds. Their excellent design capabilities, and uniform and tunable pore structure make them potential materials for various applications. With the continuous development of synthesis technique and nanoscience, COFs have been successfully combined with a variety of functional materials to form COFs-based composites with superior performance than individual components. This paper offers an overview of the development of different types of COFs-based composites reported so far, with particular focus on the applications of COFs-based composites. Moreover, the challenges and future development prospects of COFs-based composites are presented. We anticipate that the review will provide some inspiration for the further development of COFs-based composites.

One-step achievement of Fe-doped and interfacial Ru nanoclusters co-engineered Ni(OH)2 electrocatalyst on Ni foam for promoted oxygen evolution reaction

The creation of inexpensive, high-performance catalysts to reduce the overpotential of the oxygen evolution reaction (OER) process is critical for the electrolysis of water for hydrogen production. Therefore, we applied a one-step hydrothermal method using cation exchange reaction (CER) to prepare Fe-doped and interfacial Ru nanoclusters co-engineered Ni(OH)₂ nanosheets directly grafted on Ni foam (Ru@Fe-Ni(OH)₂/NF) for OER process. Results of electrochemical tests reveal that Ru@Fe-Ni(OH)₂/NF has excellent OER activity, and its overpotential (η) is only 266.4 mV when the current density is 50 mA cm^-2 in 1 M KOH solution, even lower than that of commercial OER catalyst RuO₂ (355 mV). The Tafel slope also decreases from 133.8 mV dec^-1 for pristine Ni(OH)₂/NF material to 24.1 mV dec^-1 for Ru@Fe-Ni(OH)₂/NF, indicating the higher charge transfer rates and fastest kinetics for water oxidation. At an overpotential of 300 mV the optimal turnover frequency (TOF) of 0.062 s^-1 for Ru@Fe-Ni(OH)₂/NF is achieved compared to that of Ni(OH)₂/NF (0.014 s^-1, NN), demonstrating the fast reaction kinetics of the as-prepared electrocatcalyst. After 24 h stability test, the catalytic activity of Ru@Fe-Ni(OH)₂/NF was only attenuated by 2 %, showing excellent OER stability and durability. Our results show that we have successfully developed an efficient OER catalyst for green and efficient electrocatalytic hydrolysis to produce H₂ and O₂, providing a promising method for clean H₂ production.

An Initial Covalent Organic Polymer with Closed-F Edges Directly for Proton-Exchange-Membrane Fuel Cells

Covalent organic polymers (COPs) are a class of rising electrocatalysts for the oxygen reduction reaction (ORR) due to the atomically metrical control of the organic molecular components along with highly architectural robustness and thermodynamic stability even in acid or alkaline media. However, the direct application of pristine COPs as acidic ORR electrocatalysts, especially in device manner, e.g., in proton-exchange-membrane fuel cells (PEMFCs), remains a big challenge. Currently, the decoration toward electronic structures of active sites is considered a vital pathway to enhancing the acidic ORR activity of carbon-based electrocatalysts. Here, an initial F-decorated fully closed π-conjugated quasi-phthalocyanine COP (denoted as COP_BTC -F) is reported. The introduction of the closed-F edges stepwise drags more electrons from FeN₄ sites in COP_BTC -F into the catalyst margin, which weakens the occupied numbers of bonding orbitals between COP_BTC -F and OH* intermediates at the rate-determining step, exhibiting over five times intrinsic performance beyond the counterpart without F functionalities (termed as COP_BTC ). Significantly, the maximum power density utilizing COP_BTC -F as a cathode catalyst in PEMFCs is remarkably increased by an order of magnitude compared with COP_BTC , which is a stride forward among catalysts based on a pyrolysis-free conjugated-polymer network in device manner to date.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Covalent organic framework-based porous materials for harmful gas purification

Covalent organic frameworks (COFs) with 2D or 3D networks are a class of novel porous crystalline materials, and have attracted more and more attention in the field of gas purification owing to their attractive physicochemical properties, such as high surface area, adjustable functionality and structure, low density, and high stability. However, few systematic reviews about the application statuses of COFs in gas purification are available, especially about non-CO₂ harmful gases. In this review, the recent progress of COFs about the capture, catalysis, and detection of common harmful gases (such as CO₂, NO_x, SO₂, H₂S, NH₃ and volatile pollutants) were comprehensively discussed. The design strategies of COF functional materials from porosity adjustment to surface functionalization (including bottom-up approach, post-synthetic approach, and blending with other materials) for certain application were summarized in detail. Furthermore, the faced challenges and future research directions of COFs in the harmful gas treatment were clearly proposed to inspire the development of COFs.

Porous organic polymers for electrocatalysis

Porous organic polymers (POPs) composed of organic building units linked via covalent bonds are a class of lightweight porous network materials with high surface areas, tuneable pores, and designable components and structures. Owing to their well-preserved characteristics in terms of structure and composition, POPs applied as electrocatalysts have shown promising activity and achieved considerable advances in numerous electrocatalytic reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO₂ reduction reaction, N₂ reduction reaction, nitrate/nitrite reduction reaction, nitrobenzene reduction reaction, hydrogen oxidation reaction, and benzyl alcohol oxidation reaction. Herein, we present a systematic overview of recent advances in the applications of POPs in these electrocatalytic reactions. The synthesis strategies, specific active sites, and catalytic mechanisms of POPs are summarized in this review. The fundamental principles of some electrocatalytic reactions are also concluded. We further discuss the current challenges of and perspectives on POPs for electrocatalytic applications. Meanwhile, the possible future directions are highlighted to afford guidelines for the development of efficient POP electrocatalysts.

An efficient and stable iodine-doped nickel hydroxide electrocatalyst for water oxidation: synthesis, electrochemical performance, and stability

The design of oxygen evolution reaction (OER) catalysts with higher stability and activity by economical and convenient methods is considered particularly important for the energy conversion technology. Herein, a simple hydrothermal method was adopted for the synthesis of iodine-doped nickel hydroxide nanoparticles and their OER performance was explored. The electrocatalysts were structurally characterized by powder X-ray diffraction analysis (P-XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), and BET analysis. The electrochemical performance of the electrocatalysts was assessed by cyclic voltammetry, linear sweep voltammetry, and electrochemical impedance spectroscopy. The abundant catalytic active sites, oxygen vacancies, low charge-transfer resistance, and a high pore diameter to pore size ratio of iodine-doped Ni(OH)₂ were responsible for its excellent catalytic activity, whereby OER was initiated even at 1.52 V (vs. RHE) and a 330 mV overpotential was needed to reach a 40 mV cm⁻² current density in 1 M KOH solution. The material also exhibited a low Tafel slope (46 mV dec⁻¹), which suggests faster charge-transfer kinetics as compared to its counterparts tested under the same electrochemical environment. It is worth noting that this facile and effective approach suggests a new way for the fabrication of metal hydroxides rich in oxygen vacancies, thus with the potential to boost the electrochemical performance of energy-related systems.

Oxygen evolution reaction mechanism under alkaline conditions over the iodine-doped Ni(OH)₂ surface.

Carbonaceous Oxygen Evolution Reaction Catalysts: From Defect and Doping-Induced Activity over Hybrid Compounds to Ordered Framework Structures

Oxygen evolution reaction (OER) is expected to be of great importance for the future energy conversion and storage in form of hydrogen by water electrolysis. Besides the traditional noble-metal or transition metal oxide-based catalysts, carbonaceous electrocatalysts are of great interest due to their huge structural and compositional variety and unrestricted abundance. This review provides a summary of recent advances in the field of carbon-based OER catalysts ranging from "pure" or unintentionally doped carbon allotropes over heteroatom-doped carbonaceous materials and carbon/transition metal compounds to metal oxide composites where the role of carbon is mainly assigned to be a conductive support. Furthermore, the review discusses the recent developments in the field of ordered carbon framework structures (metal organic framework and covalent organic framework structures) that potentially allow a rational design of heteroatom-doped 3D porous structures with defined composition and spatial arrangement of doping atoms to deepen the understanding on the OER mechanism on carbonaceous structures in the future. Besides introducing the structural and compositional origin of electrochemical activity, the review discusses the mechanism of the catalytic activity of carbonaceous materials, their stability under OER conditions, and potential synergistic effects in combination with metal (or metal oxide) co-catalysts.

Nanostructured Carbon Electrocatalysts for Energy Conversions

The growing energy demand worldwide has led to increased use of fossil fuels. This, in turn, is making fossil fuels dwindle faster and cause more negative environmental impacts. Thus, alternative, environmentally friendly energy sources such as fuel cells and electrolyzers are being developed. While significant progress has already been made in this area, such energy systems are still hard to scale up because of their noble metal catalysts. In this concept paper, first, various scalable nanocarbon-based electrocatalysts that are being synthesized for energy conversions in these energy systems are introduced. Next, notable heteroatom-doping and nanostructuring strategies that are applied to produce different nanostructured carbon materials with high electrocatalytic activities for energy conversions are discussed. The concepts used to develop such materials with different structures and large density of dopant-based catalytic functional groups in a sustainable way, and the challenges therein, are emphasized in the discussions. The discussions also include the importance of various analytical, theoretical, and computational methods to probe the relationships between the compositions, structures, dopants, and active catalytic sites in such materials. These studies, coupled with experimental studies, can further guide innovative synthetic routes to efficient nanostructured carbon electrocatalysts for practical, large-scale energy conversion applications.

Covalent Organic Framework (COF)-Based Hybrids for Electrocatalysis: Recent Advances and Perspectives

Developing highly efficient electrocatalysts for renewable energy conversion and environment purification has long been a research priority in the past 15 years. Covalent organic frameworks (COFs) have emerged as a burgeoning family of organic materials internally connected by covalent bonds and have been explored as promising candidates in electrocatalysis. The reticular geometry of COFs can provide an excellent platform for precise incorporation of the active sites in the framework, and the fine-tuning hierarchical porous architectures can enable efficient accessibility of the active sites and mass transportation. Considerable advances are made in rational design and controllable fabrication of COF-based organic-inorganic hybrids, that containing organic frameworks and inorganic electroactive species to induce novel physicochemical properties, and take advantage of the synergistic effect for targeted electrocatalysis with the hybrid system. Branches of COF-based hybrids containing a diversity form of metals, metal compounds, as well as metal-free carbons have come to the fore as highly promising electrocatalysts. This review aims to provide a systematic and profound understanding of the design principles behind the COF-based hybrids for electrocatalysis applications. Particularly, the structure-activity relationship and the synergistic effects in the COF-based hybrid systems are discussed to shed some light on the future design of next-generation electrocatalysts.

Synergistic effects of Co/CoO nanoparticles on imine-based covalent organic frameworks for enhanced OER performance

The development of non-noble metal electrocatalysts toward the oxygen evolution reaction (OER) is a key challenge in advancing electrocatalytic water splitting, which is essential for the commercialization of clean and renewable energy. A covalent organic framework (COF) has a precise and controllable structure, high π-π conjugation, large surface area, and porosity and shows great potential as an OER electrocatalyst. However, the relative conductivity and inherent instability greatly limit the further improvement of its performance. Herein, imine-based COF-supported Co/CoO nanoparticles (Co/CoO@COF) were developed for the high-performance electrocatalytic OER. For the Co/CoO@COF catalyst, Co/CoO could form a conjugation effect with the COF, which can increase the electron cloud density of the delocalized large π bond, then improve the conductivity. The combination of Co/CoO and COF effectively enhances the structural stability of the catalyst and enriches the catalytic active sites. Under alkaline conditions, the Co/CoO@COF shows a very low overpotential of 278 mV at a current density of 10 mA cm^-2, and a Tafel slope of 80.11 mV dec^-1 which is better than that of commercial RuO₂.

Interfacial Engineering of CuCo2S4/g-C3N4 Hybrid Nanorods for Efficient Oxygen Evolution Reaction

Altering the morphology of electrochemically active nanostructured materials could fundamentally influence their subsequent catalytic as well as oxygen evolution reaction (OER) performance. Enhanced OER activity for mixed-metal spinel-type sulfide (CuCo₂S₄) nanorods is generally done by blending the material that has high conductive supports together with those having a high surface volume ratio, for example, graphitic carbon nitrides (g-C₃N₄). Here, we report a noble-metal-free CuCo₂S₄ nanorod-based electrocatalyst appropriate for basic OER and neutral media, through a simple one-step thermal decomposition approach from its molecular precursors pyrrolidine dithiocarbamate-copper(II), Cu[PDTC]₂, and pyrrolidine dithiocarbamate-cobalt(II), Co[PDTC]₂ complexes. Transmission electron microscopy (TEM) images as well as X-ray diffraction (XRD) patterns suggest that as-synthesized CuCo₂S₄ nanorods are highly crystalline in nature and are connected on the g-C₃N₄ support. Attenuated total reflectance-Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy studies affirm the successful formation of bonds that bridge (Co-N/S-C) at the interface of CuCo₂S₄ nanorods and g-C₃N₄. The kinetics of the reaction are expedited, as these bridging bonds function as an electron transport chain, empowering OER electrocatalytically under a low overpotential (242 mV) of a current density at 10 mA cm^-2 under basic conditions, resulting in very high durability. Moreover, CuCo₂S₄/g-C₃N₄ composite nanorods exhibit a high catalytic activity of OER under a neutral medium at an overpotential of 406 mV and a current density of 10 mA cm^-2.

Strategies for Improving the Catalytic Performance of 2D Covalent Organic Frameworks for Hydrogen Evolution and Oxygen Evolution Reactions

Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) have been deemed as clean and sustainable strategies to solve the energy crisis and environmental problems. Various catalysts have been developed to promote the process of HER and OER. Among them, two-dimensional covalent organic frameworks (2D COFs) have received great attention due to their diverse and designable structure. In this minireview, we mainly summarize the diverse linkages of 2D COFs and strategies for enhancing the catalytic performance of 2D COFs for HER and OER, such as introducing active building blocks, metal ions and tailored linkages. Furthermore, a brief outlook for the development directions of COFs in the field of HER and OER is provided, expecting to stimulate new opportunities in future research.

Progress and Perspectives on Covalent-organic Frameworks (COFs) and Composites for Various Energy Applications

Covalent-organic frameworks (COFs), being a new member of the crystalline porous materials family, have emerged as important materials for energy storage/conversion/generation devices. They possess high surface areas, ordered micro/mesopores, designable structures and an ability to precisely control electro-active groups in their pores, which broaden their application window. Thanks to their low weight density, long range crystallinity, reticular nature and tunable synthesis approach towards two and three dimensional (2D and 3D) networks, they have been found suitable for a range of challenging electrochemical applications. Our review focuses on the progress made on the design, synthesis and structure of COFs and their composites for various energy applications, such as metal-ion batteries, supercapacitors, water-splitting and solar cells. Additionally, attempts have been made to correlate the structural and mechanistic characteristics of COFs with their applications.

Enhancing One-Dimensional Charge Transport in Metal-organic Framework Hexagonal Nanorods for Electrocatalytic Oxygen Evolution

Metal-organic frameworks (MOFs) have exhibited huge potential in electrocatalytic fields. However, the intrinsic low conductivity and the blockage of metal active sites by organic linkers still seriously hinder their large-scale application. In this study, as a proof of principle, constructing cofacial π-π stacking in the terminal ligand (4,4'-bipyridine) of a Ni/Fe-chain-based MOF to fabricate strong π-π interaction, in combination with unique hexagonal nanorod (HXR) structure, is found to be an effective strategy to enhance one-dimensional charge carrier efficiency and thus achieve excellent activity in the oxygen evolution reaction (OER). The approach yields a high turnover frequency (4.54 s^-1 ) in well-designed bimetallic chain-based MOFs (NiFe-HXR) at an overpotential of 350 mV, which is about 8.7 and 34.9 times higher than those in Ni-HXR (0.52 s^-1 ) and IrO₂ (0.13 s^-1 ), respectively. This work effectively combines "through-bond" channel in chain-based structure of NiFe-HXR and "through-space" transport between face-to-face terminal ligands, thus resulting in outstanding OER activity. This strategy of modulating the structure chemistry and morphology of MOFs to promote the OER may open a new perspective to synthesize MOFs for energy-relevant electrochemical reactions.

Emerging new-generation hybrids based on covalent organic frameworks for industrial applications

This review highlights the advancement of COF hybrid-based materials for diverse industrial applications.

Surfactant-Free Approach for Engineering an Ultrathin Ti-Doped Ni(OH)2 Nanosheet on Carbon Cloth: Experimental and Theoretical Insight into Boosted Alkaline Water Oxidation Activity

Ti-based layered double hydroxides (LDHs) have enormous potential in photocatalysis, electrocatalysis, and photoelectrocatalysis. However, Ti-based LDHs are rarely reported because of the difficulties of the preparation process, in which the Ti precursors are more prone to hydrolysis into titanium hydroxide. In this work, toward robust, efficient, and earth-abundant electrocatalysts for water oxidation in alkaline environments, we have engineered Ti-doped Ni(OH)₂ nanosheet arrays on carbon cloth [Ti-Ni(OH)₂/CC] with a facile solvothermal and surfactant-free method. The experimental tests show that the activity of Ti-Ni(OH)₂-1/CC (∼12.5 atom % Ti substitution) is optimal among these materials. In addition, the activity is correlated with the Ti substitution ratio and reversed with higher Ti doping level (≥25 atom % Ti substitution). Therein, η₁₀ of Ti-Ni(OH)₂-1/CC is as low as 196 mV, and it is still maintained at 210 mV after a long-term chronopotentiometry (CP) test at a constant current density of 10 mA cm^-2 for 32 h, demonstrating superior activity and long-term durability. Density functional theory calculations further reveal that dilute Ti substitution produces extra active sites and promotes more optimal OH* adsorption to the surface of the electrocatalyst.

A Ni/Fe complex incorporated into a covalent organic framework as a single-site heterogeneous catalyst for efficient oxygen evolution reaction

A solid COF framework served as the seeding of supported single-site catalysts to graft Ni/Fe complex molecular catalyst similar to homogeneous catalysts by one-pot post-synthetic modification.