An Octanuclear Cobalt Cluster Protected by Macrocyclic Ligand: In Situ Ligand-Transformation-Assisted Assembly and Single-Molecule Magnet Behavior

A Family of Hexacopper Phenylsilsesquioxane/Acetate Complexes: Synthesis, Solvent-Controlled Cage Structures, and Catalytic Activity

Convenient self-assembly synthesis of copper(II) complexes via double (phenylsilsesquioxane and acetate) ligation allows to isolate a family of impressive sandwich-like cage compounds. An intriguing feature of these complexes is the difference in the structure of a pair of silsesquioxane ligands despite identical (Cu6) nuclearity and number (four) of acetate fragments. Formation of particular combination of silsesquioxane ligands (cyclic/cyclic vs condensed/condensed vs cyclic/condensed) was found to be dependent on the synthesis/crystallization media. A combination of Si4-cyclic and Si6-condensed silsesquioxane ligands is a brand new feature of cage metallasilsesquioxanes. A representative Cu6-complex (4) (with cyclic silsesquioxanes) exhibited high catalytic activity in the oxidation of alkanes and alcohols with peroxides. Maximum yield of the products of cyclohexane oxidation attained 30 %. The compound 4 was also tested as catalyst in the Baeyer-Villiger oxidation of cyclohexanone by m-chloroperoxybenzoic acid: maximum yields of 88 % and 100 % of ϵ-caprolactone were achieved upon conventional heating at 50 °C for 4 h and MW irradiation at 70 or 80 °C during 30 min, respectively. It was also possible to obtain the lactone (up to 16 % yield) directly from the cyclohexane via a tandem oxidation/Baeyer-Villiger oxidation reaction using the same oxidant.

Embedding Multiple Magnetic Components in Carbon Nanostructures via Metal-Oxo Cluster Precursor for High-Efficiency Low-/Middle-Frequency Electromagnetic Wave Absorption

With the advent of wireless technology, magnetic-carbon composites with strong electromagnetic wave (EMW) absorption capability in low-/middle-frequency range are highly desirable. However, it remains challenging for rational construction of such absorbers bearing multiple magnetic components that show uniform distribution and favorable magnetic loss. Herein, a facile metal-oxo cluster (MOC) precursor strategy is presented to produce high-efficiency magnetic carbon composites. Nanosized MOC Fe15 shelled with organic ligands is employed as a novel magnetic precursor, thus allowing in situ formation and uniform deposition of multicomponent magnetic Fe/Fe3O4@Fe3C and Fe/Fe3O4 nanoparticles on graphene oxides (GOs) and carbon nanotubes (CNTs), respectively. Owing to the good dispersity and efficient magnetic-dielectric synergy, quaternary Fe/Fe3O4@Fe3C-GO exhibits strong low-frequency absorption with RLmin of -53.5 dB at C-band and absorption bandwidth covering 3.44 GHz, while ultrahigh RLmin of -73.2 dB is achieved at X-band for ternary Fe/Fe3O4-CNT. The high performance for quaternary and ternary composites is further supported by the optimal specific EMW absorption performance (-15.7 dB mm-1 and -31.8 dB mm-1) and radar cross-section reduction (21.72 dB m2 and 34.37 dB m2). This work provides a new avenue for developing lightweight low-/middle-frequency EMW absorbers, and will inspire the investigation of more advanced EMW absorbers with multiple magnetic components and regulated microstructures.

Fe(III)-Based Phenylsilsesquioxane/Acetylacetonate Complexes: Synthesis, Cage-like Structure, and High Catalytic Activity

Unprecedented iron-based silsesquioxane/acetylacetonate complexes were synthesized. The intriguing cage-like structure of compounds is alkaline metal-dependent: the Fe2Li2 complex includes condensed Si6-silsesquioxane and four acetylacetonate ligands; the Fe4Na4 complex exhibits two cyclic Si4-silsesquioxane and eight acetylacetonate ligands, while the Fe3K3 complex features two cyclic Si3-silsesquioxane and six acetylacetonate ligands. The latter case is the very first observation of small trimeric silsesquioxane ligands in the composition of cage-like metallasilsesquioxanes. The Fe4Na4-based complex exhibits a record high activity in the oxidation of inert alkanes with peroxides (55% yield of oxygenates in cyclohexane oxidation). It also acts as a catalyst in the cycloaddition of CO2 with epoxides, leading to cyclic carbonates in good yields (58-96%).

A Family of Cagelike Mn-Silsesquioxane/Bathophenanthroline Complexes: Synthesis, Structure, and Catalytic and Antifungal Activity

This study reports a novel family of cage manganesesilsesquioxanes prepared via complexation with bathophenanthroline (4,7-diphenyl-1,10-phenanthroline). The resulting Mn4-, Mn6Li2-, and Mn4Na-compounds exhibit several unprecedented cage metallasilsesquioxane structural features, including intriguing self-assembly of silsesquioxane ligands. Complexes were tested in vitro for fungicidal activity against seven classes of phytopathogenic fungi. The representative Mn4Na-complex acts as a catalyst in the cycloaddition of CO2 to epoxides under solvent-free conditions to form cyclic carbonates in good yields.

Zn(II)-Siloxane Clusters as Versatile Building Blocks for Carboxylate-Based Metal-Organic Frameworks

Siloxanes have long been known for their highly desirable properties suited for a wide range of practical applications; however, their utilization as modular building blocks for crystalline open frameworks has been limited. In this study, a simple solvothermal pathway has been found to synthesize unprecedented Zn(II)-siloxane clusters supported by acetate ligands, [(RSiO2)8Zn8(CH3CO2)8] (R = Me or Ph). The same reaction using a dicarboxylate ligand such as 1,4-benzenedicarboxylate or 2,6-naphthalenedicarboxylate produces a new type of metal-organic framework, named SiMOF here, based on the [Si8Zn8] units. With the maximum connectivity of 8, the building block is shown to form topologically interesting structures such as octahedral supercages or uninodal 8-connected frameworks. All SiMOFs synthesized possess permanent porosity and high thermal stability and are naturally hydrophobic, as demonstrated by adsorptions of toluene, ethanol, methanol, and water vapor as well as water contact angle measurements. These promising characteristics for well-defined porous solids are attributed to metal-bound siloxane groups in the structural building units.

Cage-like Cu5Cs4-Phenylsilsesquioxanes: Synthesis, Supramolecular Structures, and Catalytic Activity

A small family of nonanuclear Cu5Cs4-based phenylsilsesquioxanes 1-2 were prepared by a convenient self-assembly approach and characterized by X-ray diffraction studies. The compounds 1 and 2 show some unprecedented structural features such as the presence of a [Ph14Si14O28]14- silsesquioxane ligand and a CuII5CsI4 nuclearity in which the metal cations occupy unusual positions within the cluster. Copper ions are "wrapped" into a silsesquioxane matrix, while cesium ions are located in external positions. This resulted in cesium-involved aggregation of coordination polymer structures. Both compounds 1 and 2 realize specific metallocene (cesium-phenyl) linkage between neighboring cages. Compound 2 is evaluated as a catalyst in the Baeyer-Villiger (B-V) oxidation of cyclohexanone and tandem cyclohexane oxidation/B-V oxidation of cyclohexanone with m-chloroperoxybenzoic acid (mCPBA) as an oxidant, in an aqueous acetonitrile medium, and HNO3 as the promoter. A quantitative yield of ε-caprolactone was achieved under conventional heating at 50 °C for 4 h or MW irradiation for 30 min (for cyclohexanone as substrate); 17 and 19% yields of lactone upon MW irradiation at 80 °C for 30 min and heating at 50 °C for 4 h, respectively (for cyclohexane as a substrate), were achieved. Complex 2 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with peroxides at 60 °C in acetonitrile. The maximum yield of cyclohexane oxidation products was 30%. Complex 2 exhibits high activity in the oxidation of alcohols.

Cagelike Octacopper Methylsilsesquioxanes: Self-Assembly in the Focus of Alkaline Metal Ion Influence-Synthesis, Structure, and Catalytic Activity

A family of unusual octacopper cage methylsilsesquioxanes 1-4 were prepared and characterized. Features of their cagelike (prismatic) structure were established using X-ray diffraction studies. Effects of distortion of prismatic cages 1-4 due to variation of (i) additional alkaline metal ions (K, Rb, or Cs), (ii) combination of solvating ligands, and (iii) nature of encapsulating species were found. Opportunities for the design of supramolecular 1D extended structures were found. These opportunities are based on (i) formate linkers between copper centers (in the case of Cu₈K₂-based compound 2) or (ii) crown ether-like contacts between cesium ions and siloxane cycles (in the case of Cu₈Cs₂-based compound 4). Cu₈Cs₂-complex 4 was evaluated in the catalysis of alkanes and alcohols. Complex 4 exhibits high catalytic activity. The yield of cyclohexane oxidation products is 35%. The presence of nitric acid is necessary as a co-catalyst. The oxidation of alcohols with the participation of complex 4 as a catalyst and tert-butyl hydroperoxide as an oxidizer also proceeds in high yields of up to 98%.

Hybrid Silsesquioxane/Benzoate Cu7-Complexes: Synthesis, Unique Cage Structure, and Catalytic Activity

A series of phenylsilsesquioxane-benzoate heptacopper complexes 1-3 were synthesized and characterized by X-ray crystallography. Two parallel routes of toluene spontaneous oxidation (into benzyl alcohol and benzoate) assisted the formation of the cagelike structure 1. A unique multi-ligation of copper ions (from (i) silsesquioxane, (ii) benzoate, (iii) benzyl alcohol, (iv) pyridine, (v) dimethyl-formamide and (vi) water ligands) was found in 1. Directed self-assembly using benzoic acid as a reactant afforded complexes 2-3 with the same main structural features as for 1, namely heptanuclear core coordinated by (i) two distorted pentameric cyclic silsesquioxane and (ii) four benzoate ligands, but featuring other solvate surroundings. Complex 3 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with hydrogen peroxide and tert-butyl hydroperoxide, respectively, at 50 °C in acetonitrile. The maximum yield of cyclohexane oxidation products as high as 32% was attained. The oxidation reaction results in a mixture of cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone. Upon the addition of triphenylphosphine, the cyclohexyl hydroperoxide is completely converted to cyclohexanol. The specific regio- and chemoselectivity in the oxidation of n-heptane and methylcyclohexane, respectively, indicate the involvement of of hydroxyl radicals. Complex 3 exhibits a high activity in the oxidation of alcohols.

A Novel Family of Cage-like (CuLi, CuNa, CuK)-phenylsilsesquioxane Complexes with 8-hydroxyquinoline Ligands: Synthesis, Structure, and Catalytic Activity

The first examples of metallasilsesquioxane complexes, including ligands of the 8-hydroxyquinoline family 1–9, were synthesized, and their structures were established by single crystal X-ray diffraction using synchrotron radiation. Compounds 1–9 tend to form a type of sandwich-like cage of Cu₄M₂ nuclearity (M = Li, Na, K). Each complex includes two cisoid pentameric silsesquioxane ligands and two 8-hydroxyquinoline ligands. The latter coordinates the copper ions and corresponding alkaline metal ions (via the deprotonated oxygen site). A characteristic (size) of the alkaline metal ion and a variation of characteristics of nitrogen ligands (8-hydroxyquinoline vs. 5-chloro-8-hydroxyquinoline vs. 5,7-dibromo-8-hydroxyquinoline vs. 5,7-diiodo-8-hydroxyquinoline) are highly influential for the formation of the supramolecular structure of the complexes 3a, 5, and 7–9. The Cu₆Na₂-based compound 2 exhibits high catalytic activity towards the oxidation of (i) hydrocarbons by H₂O₂ activated with HNO₃, and (ii) alcohols by tert-butyl hydroperoxide. Studies of kinetics and their selectivity has led us to conclude that it is the hydroxyl radicals that play a crucial role in this process.

Acetone Factor in the Design of Cu4-, Cu6-, and Cu9-Based Cage Coppersilsesquioxanes: Synthesis, Structural Features, and Catalytic Functionalization of Alkanes

The present study describes a new feature in the self-assembly of cagelike copperphenylsilsesquioxanes: the strong influence of acetone solvates on cage structure formation. By this simple approach, a series of novel tetra-, hexa-, or nonacoppersilsesquioxanes were isolated and characterized. In addition, several new complexes of Cu₄ or Cu₆ nuclearity bearing additional nitrogen-based ligands (ethylenediamine, 2,2'-bipyridine, phenanthroline, bathophenanthroline, or neocuproine) were produced. Single-crystal X-ray diffraction studies established molecular architectures of all of the synthesized products. Several coppersilsesquioxanes represent a novel feature of cagelike metallasilsesquioxane (CLMS) in terms of molecular topology. A Cu₄-silsesquioxane complex with ethylenediamine (En) ligands was isolated via the unprecedented self-assembly of a partly condensed framework of silsesquioxane ligands, followed by the formation of a sandwich-like cage. Two prismatic Cu₆ complexes represent the different conformers─regular and elliptical hexagonal prisms, "cylinders", determined by the different orientations of the coordinated acetone ligands ("shape-switch effect"). A heterometallic Cu₄Na₄-sandwich-like derivative represents the first example of a metallasilsesquioxane complex with diacetone alcohol ligands formed in situ due to acetone condensation reaction. As a selected example, the compound [(Ph₆Si₆O₁₁)₂Cu₄En₂]·(acetone)₂ was explored in homogeneous oxidation catalysis. It catalyzes the oxidation of alkanes to alkyl hydroperoxides with hydrogen peroxide and the oxidation of alcohols to ketones with tert-butyl hydroperoxide. Radical species take part in the oxidation of alkanes. Besides, [(Ph₆Si₆O₁₁)₂Cu₄En₂]·(acetone)₂ catalyzes the mild oxidative functionalization of gaseous alkanes (ethane, propane, n-butane, and i-butane). Two different model reactions were investigated: (1) the oxidation of gaseous alkanes with hydrogen peroxide to give a mixture of oxygenates (alcohols, ketones, or aldehydes) and (2) the carboxylation of C_n gaseous alkanes with carbon monoxide, water, and potassium peroxodisulfate to give C_n+1 carboxylic acids (main products), along with the corresponding C_n oxygenates. For these reactions, the effects of acid promoter, reaction time, and substrate scope were explored. As expected for free-radical-type reactions, the alkane reactivity follows the trend C₂H₆ < C₃H₈ < n-C₄H₁₀ < i-C₄H₁₀. The highest total product yields were observed in the carboxylation of i-butane (up to 61% based on i-C₄H₁₀). The product yields and catalyst turnover numbers (TONs) are remarkable, given an inertness of gaseous alkanes and very mild reaction conditions applied (low pressures, 50-60 °C temperatures).

A mixed-valence [CoII 4CoIII 2] cluster with defect disk-shaped topology

A mixed-valence Co₆ cluster was synthesized and characterized. It exhibits a defect disk-shaped architecture. DC magnetic property studies in the 2.0–300 K range revealed anti­ferromagnetic inter­actions between the Co^II ions.

The employment of the new Schiff base ligand 2-[(4-chloro-2-hy­droxy­benzyl­idene­amino)­meth­yl]phenol (H₂L) bearing O₂N donors for the preparation of a novel Co₆ cluster is reported. The hexa­nuclear cobalt com­plex, namely, di-μ₂-acetato­tetra­kis­{μ₂-2-[(4-chloro-2-oxido­benzyl­idene­amino)­meth­yl]phenolato}tetra-μ₃-methano­lato-tetra­cobalt(II)dicobalt(III), [Co^II₄Co^III₂(C₁₄H₁₀ClNO₂)₄(CH₃COO)₂(CH₃O)₄], was obtained using Co(CH₃COO)₂·4H₂O and H₂L as starting materials in MeOH under solvothermal conditions. The six metal ions are linked together by the μ₃-O atoms of four deprotonated MeOH mol­ecules, two CH₃COO⁻ units and six phenolate O atoms of four L²⁻ ligands to form a defect disk-shaped topology. DC magnetic susceptibility investigations revealed the existence of anti­ferromagnetic inter­actions in the Co₆ cluster.

Self-assembly of fish-bone and grid-like CoII-based single-molecule magnets using dihydrazone ligands with NNN and NNO pockets

Three Co^II complexes, [Co₂(H₂L¹)₂](ClO₄)₄·4CH₃OH (1), [Co₂(H₄L²)₂](ClO₄)₄ (2) and [Co₄(H₄L²)₄](ClO₄)₈ (3), were constructed by the self-assembly of the symmetrical dihydrazone ligands H2L1 and H4L2 with Co^II ions under different synthetic conditions. The fish-bone-like complex 1 was obtained using the ligand H2L1 in methanol via the solvothermal method, while the self-assembly of H4L2 with Co^II ions is solvent-dependent, producing the fish-bone-like complex 2 and [2 × 2] grid-like complex 3. Magnetic susceptibility measurements and theoretical calculations reveal that the large negative D values for the three complexes stem from their easy-axis magnetic anisotropy. Ac magnetic susceptibility measurements disclosed field-induced slow magnetic relaxation behaviors and the presence of Raman and/or direct processes of the three complexes at various applied dc fields.

Synthesis of Novel Luminescent Double-Decker Silsesquioxanes Based on Partially Condensed TetraSilanolPhenyl POSS and Tb3+/Eu3+ Lanthanide Ions

In this study, novel lanthanide-containing double-decker polyhedral oligomeric silsesquioxanes (POSS) were prepared by combining the partially condensed TetraSilanolPhenyl POSS with terbium (Tb3+) and europium (Eu3+) ions. This open-cage POSS possesses four diametrically opposite silanol groups that are able to coordinate, under mild conditions, different luminescent ions through a simple corner-capping method. The two metal-containing POSS functionalized with Tb3+ and with an equimolar combination of Tb3+ and Eu3+ show a completely condensed structure with different luminescent properties. Their emission features depend on the chemical nature of the metal ions incorporated in the framework. An improved stokes shift was detected in the bimetallic compound containing both the Tb3+ and Eu3+ ions, promoted by the occurrence of a Tb3+→Eu3+ energy transfer mechanism. These characteristics identify this metal-functionalized silica platform as a potential candidate for the development of novel luminescent devices.

Cage-like manganesesilsesquioxanes: features of their synthesis, unique structure, and catalytic activity in oxidative amidations

A family of Mn-based cage-like silsesquioxanes (and complexes with 1,10-phenanthroline) exhibits unique types of molecular architectures and catalytic activity in oxidative amidation reactions.

A Carbonate-Templated Decanuclear Mn Nanocage with Two Different Silsesquioxane Ligands

The mild reaction of the preorganized silsesquioxane precursor with Mn(II) acetate under ambient conditions results in a mixed-valent {Mn^II₆Mn^III₄} nanocage (SD/Mn10) which is protected by both acyclic trimer [Si3] and cyclic tetramer [Si4]. Serendipitous capture of atmospheric CO₂ as a μ₅-carbonate anion placed at the center supports the formation of the cluster. The magnetic analysis reveals the strong antiferromagnetic interactions between Mn ions. Moreover, the drop-casting film of SD/Mn10 shows photoelectric activity indicating its great potential as a semiconductor for photoelectric conversion applications.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity

This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu₆ cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu₈-based (6 and 7) and Cu₆-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu₆ cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C₅-C₈ cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

Template-Induced {Mn2}-Organic Framework with Lewis Acid-Base Canals as a Highly Efficient Heterogeneous Catalyst for Chemical Fixation of CO2 and Knoevenagel Condensation

The target for the self-assembly of functional microporous metal-organic frameworks (MOFs) could be realized by employing ligand-directed and/or template-induced strategies, which prompted us to explore the synthetic technique of d¹⁰ secondary-building-unit-based nanoporous frameworks. Here, the exquisite combination of a paddle-wheel [Mn₂(CO₂)₆(OH₂)₂] cluster and a TDP^6- ligand contributes one robust honeycomb framework of {(Me₂NH₂)₂[Mn₂(TDP)(H₂O)₂]·3H₂O·3DMF}_n (NUC-31; DMF = N,N-dimethylformamide), whose activated state with the removal of associated aqueous molecules characterizes the outstanding physicochemical properties of nanochannels, penta- and tetracoordinated Mn²⁺ serving as highly open metal sites, rich Lewis base sites (rows of C═O groups and N_pyridine atoms), and excellent thermal stability. Moreover, it is worth mentioning that Lewis acid-base sites on the inner surface of the channels in activated NUC-31 successfully form one unprecedented canal-shaped acid-base confined space with evenly distributed open metal sites of Mn²⁺ and N_pyridine atoms as the canal bottom as well as two rows of C═O groups serving as dyke dams. Catalytic experiments displayed that activated NUC-31 could serve as an efficient heterogeneous catalyst for the chemical fixation of CO₂ with epoxides into cyclic carbonates under mild conditions. Furthermore, NUC-31 could effectively catalyze the reaction Knoevenagel condensation, which should be ascribed to the synergistic polarization effect aroused from its plentiful Lewis base sites in the confined channel space. Hence, these results demonstrate that the employment of ligand-directed and template-dependent strategies could overcome the self-assembled barriers of functional microporous MOFs and achieve unexpected frameworks.

V═O Functionalized {Tm2}-Organic Framework Designed by Postsynthesis Modification for Catalytic Chemical Fixation of CO2 and Oxidation of Mustard Gas

In terms of recently documented references, the introduction of V═O units into porous MOF/COF frameworks can greatly improve their original performance and expand their application prospects due to a change in their electronegativity. In this work, by a cation-exchange strategy, a consummate combination of separate 4f [Tm₂(CO₂)₈] SBUs and 3d [V^IVO(H₂O)₂] units generated the functionalized porous metal-organic framework {(Me₂NH₂)₂[VO(H₂O)][Tm₂(BDCP)₂]·3DMF·3H₂O}_n (NUC-11), in which [Tm₂(CO₂)₈] SBUs constitute the fundamental 3D host framework of {[Tm₂](BDCP)₂}_n along with [V^IVO(H₂O)₂] units being further docked on the inner wall of channels by covalent bonds. Significantly, NUC-11 represents the first example of V═O modified porous MOFs, in which uncoordinated carboxylic groups (-CO₂H) further grasp the functional [V^IVO(H₂O)₂] units on the initial basic skeleton along with the formation of covalent bonds as fixed ropes. Furthermore, activated samples of NUC-11 displayed a good catalytic performance for the chemical synthesis of carbonates from related epoxides and CO₂ with high conversion rate. Moreover, by employing NUC-11 as a catalyst, a simulator of mustard gas, 2-chloroethyl ethyl sulfide, could be quickly and efficiently oxidized into low-toxicity products of oxidized sulfoxide (CEESO). Thus, this study offers a brand new view for the design and synthesis of functional-units-modified porous MOFs, which could be potentially applied as an excellent candidate in the growing field of efficient catalysis.

Nanochannel-based heterometallic {ZnIIHoIII}-organic framework with high catalytic activity for the chemical fixation of CO2

The exquisite combination of ZnII and HoIII generated the highly robust [ZnHo(CO2)6(OH2)]-based heterometallic framework of {[ZnHo(TDP)(H2O)]·5H2O·3DMF} n (NUC-30, H6TDP = 2,4,6-tri(2',4'-dicarboxyphenyl)pyridine), which featured outstanding physicochemical properties, including honeycomb nanochannels, high porosity, large specific surface area, the coexistence of highly open Lewis acid-base sites, good thermal and chemical stability, and resistance to most organic solvents. Due to its extremely unsaturated metal tetra-coordinated Zn(ii) ions, hepta-coordinated Ho(iii) and high faveolate void volume (61.3%), the conversion rate of styrene oxide and CO2 into cyclic carbonates in the presence of 2 mol% activated NUC-30 and 5 mol% n-Bu4NBr reached 99% under the mild conditions of 1.0 MPa and 60 °C. Furthermore, the luminescence sensing experiments proved that NUC-30 could be used as a fast, sensitive and highly efficiency sensor for the detection of Fe3+ in aqueous solution. Therefore, these results prove that nanoporous MOFs assembled from pyridine-containing polycarboxylate ligands have wide applications, such as catalysis and as luminescent materials.

A quasilinear hydrazone-based mononuclear dysprosium compound with C4v symmetry exhibiting field-induced complex magnetic relaxation

A C4v symmetrical mononuclear dysprosium(iii) compound has been successfully isolated using a new quasilinear single pyrazinyl hydrazone ligand. Single-ion behavior and the short-range intermolecular magnetic dipolar interaction are essential to the complex magnetic relaxation.

Assembly of {Co14} nanoclusters from adenine-modified Co4-thiacalix[4]arene units

An adenine-modified Co₄-thiacalix[4]arene unit can serve as a second building unit for fabrication of three Co₁₄ clusters with different structures.

New Luminescent Tetranuclear Lanthanide-Based Silsesquioxane Cage-Like Architectures

The synthesis, structure, magnetic, and luminescence properties investigations of four new cage-like lanthanide-based silsesquioxanes (Cat)₂ [(PhSiO_1.5 )₈ (LnO_1.5 )₄ (O)(NO_2.5 )₆ (EtOH)₂ (MeCN)₂ ] (where Cat⁺ =Et₄ N⁺ , PPh₄ P⁺ and Ln³⁺ =Eu³⁺ , Tb³⁺ and (Ph₄ P)₄ [(PhSiO_1.5 )₈ (TbO_1.5 )₄ (O)₂ (NO_2.5 )₈ ]⋅10MeCN are reported. They present an unusual prism-like topology of cage architectures and lanthanide-characteristic emission, which makes them the first luminescent cage-like lanthanide silsesquioxanes. One of the Tb³⁺ -based cages presents a magnetic spin-flip transition.