Dinitrogen as a Universal Electron Acceptor in Solid-State Chemistry: An Example of Uncommon Metallic Compounds Na3(N2)4 and NaN2

Stabilization of N6 and N8 anionic units and 2D polynitrogen layers in high-pressure scandium polynitrides

Nitrogen catenation under high pressure leads to the formation of polynitrogen compounds with potentially unique properties. The exploration of the entire spectrum of poly- and oligo-nitrogen moieties is still in its earliest stages. Here, we report on four novel scandium nitrides, Sc2N6, Sc2N8, ScN5, and Sc4N3, synthesized by direct reaction between yttrium and nitrogen at 78-125 GPa and 2500 K in laser-heated diamond anvil cells. High-pressure synchrotron single-crystal X-ray diffraction reveals that in the crystal structures of the nitrogen-rich Sc2N6, Sc2N8, and ScN5 phases nitrogen is catenated forming previously unknown N66- and N86- units and ∞ 2 ( N 5 3 - ) anionic corrugated 2D-polynitrogen layers consisting of fused N12 rings. Density functional theory calculations, confirming the dynamical stability of the synthesized compounds, show that Sc2N6 and Sc2N8 possess an anion-driven metallicity, while ScN5 is an indirect semiconductor. Sc2N6, Sc2N8, and ScN5 solids are promising high-energy-density materials with calculated volumetric energy density, detonation velocity, and detonation pressure higher than those of TNT.

Defect rocksalt structures in the La-Na-N system

Sodium azide (NaN3) is a versatile nitrogen source that can be used for the synthesis of new nitrides under high-pressure and temperature conditions. Reactions between lanthanum nitride (LaN) and sodium azide (NaN3) at 800°C under 8 GPa pressure have led to the discovery of two defect rocksalt phases which are the first reported ternaries in the La-Na-N system. Preliminary structure assignments have been made based on fits to powder X-ray diffraction profiles. One phase is La1-xNa3xN with vacancies at octahedral La sites and interstitial tetrahedral Na cations. This phase has a tetragonally distorted rocksalt structure (space group I4[Formula: see text]mmm, a = 3.8704(2) and c = 5.2098(3) Å for nominal x = 0.10) and the distortion decreases with increasing Na content (space group I4[Formula: see text]mmm, a = 3.8060(2) Å, c = 5.2470(3) Å for nominal x = 0.14), further giving a cubic phase (a = 5.3055(2) Å) for nominal x = 0.25. This coexists with another cubic [Formula: see text] phase (a = 5.1561 (5) Å), tentatively identified as rocksalt 'NaN1/3' stabilized by a small amount of La; NaLayN(1+3y)/3 with y ≈ 1%. These initial investigations reveal that the high-pressure La-Na-N phase diagram may be rich in defect rocksalt-type materials although further work using neutron diffraction will be needed to confirm the structures. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 1)'.

High-pressure reactions between the pnictogens: the rediscovery of BiN

We explore chemical reactions within pnictogens with an example of bismuth and nitrogen under extreme conditions. Understanding chemical reactions between Bi and N, elements representing the first and the last stable elements of the nitrogen group, and the physical properties of their compounds under ambient and high pressure is far from being complete. Here, we report the high-pressure high-temperature synthesis of orthorhombic Pbcn BiN (S.G. #60) from Bi and N2 precursors at pressures above 40 GPa. Using synchrotron single-crystal X-ray diffraction on the polycrystalline sample, we solved and refined the compound's structure and studied its behavior and compressibility on decompression to ambient pressure. We confirm the stability of Pbcn BiN to pressures as low as 12.5(4) GPa. Below that pressure value, a group-subgroup phase transformation occurs, resulting in the formation of a non-centrosymmetric BiN solid with a space group Pca21 (S.G. #29). We use ab initio calculations to characterize the polymorphs of BiN. They also provide support and explanation for our experimental observations, in particular those corresponding to peculiar Bi-N bond evolution under pressure, resulting in a change in the coordination numbers of Bi and N as a function of pressure within the explored stability field of Pbcn BiN.

Synthesis and crystal structure of silicon pernitride SiN2 at 140 GPa

Silicon pernitride, SiN2, was synthesized from the elements at 140 GPa in a laser-heated diamond anvil cell. Its crystal structure was solved and refined by means of synchrotron-based single-crystal X-ray diffraction data. The title compound crystallizes in the pyrite structure type (space group Pa , No. 205). The Si atom occupies a site with multiplicity 4 (Wyckoff letter b, site symmetry ..), while the N atom is located on a site with multiplicity 8 (Wyckoff letter c, site symmetry .3.). The crystal structure of SiN2 is comprised of slightly distorted [SiN6] octa-hedra inter-connected with each other by sharing vertices. Crystal chemical analysis of bond lengths suggests that Si has a formal oxidation state of +IV, while nitro-gen forms pernitride anions (N-N)4-.

High-Pressure Synthesis and Stability Enhancement of Lithium Pentazolate

The pentazolate anion, cyclo-N₅^-, has received extensive attention as a new generation of energetic species for explosive or propulsion applications. Binary pentazolate compounds have been obtained under high-pressure conditions and their stability enhancement is crucial for obtaining more competitive high energy density materials (HEDMs). Here, we report the synthesis of a new solid phase of lithium pentazolate (space group P2₁/c) through the chemical transformation of pure lithium azide under high-pressure and high-temperature conditions. Upon decompression, the structural transition from P2₁/c-LiN₅ to P2₁/m-LiN₅ at ∼15.6 GPa was observed for the first time. Cyclo-N₅^- can be traced down to ∼5.7 GPa at room temperature and recovered to ambient pressure under a low-temperature condition (80 K). Our results reveal the enhancement of pentazolate anion stability with the increasing content of metal cations and demonstrate that low temperature is an effective route for the recovery of the pentazolate anion.

Stabilization of hexazine rings in potassium polynitride at high pressure

Polynitrogen molecules are attractive for high-energy-density materials due to energy stored in nitrogen-nitrogen bonds; however, it remains challenging to find energy-efficient synthetic routes and stabilization mechanisms for these compounds. Direct synthesis from molecular dinitrogen requires overcoming large activation barriers and the reaction products are prone to inherent inhomogeneity. Here we report the synthesis of planar N₆^2- hexazine dianions, stabilized in K₂N₆, from potassium azide (KN₃) on laser heating in a diamond anvil cell at pressures above 45 GPa. The resulting K₂N₆, which exhibits a metallic lustre, remains metastable down to 20 GPa. Synchrotron X-ray diffraction and Raman spectroscopy were used to identify this material, through good agreement with the theoretically predicted structural, vibrational and electronic properties for K₂N₆. The N₆^2- rings characterized here are likely to be present in other high-energy-density materials stabilized by pressure. Under 30 GPa, an unusual N₂^0.75--containing compound with the formula K₃(N₂)₄ was formed instead.

Low-dimensional magnetism in calcium nitridonickelate(II) Ca2NiN2

Calcium nitridonickelate(II) Ca₂NiN₂ has been prepared through a high-temperature and high-pressure azide-mediated redox reaction, demonstrating that this method can stabilise nitrides of late transition metals in relatively high oxidation states. Ca₂NiN₂ crystallizes in the Na₂HgO₂ structure type and displays low-dimensional antiferromagnetic ordering of Ni²⁺ spins.

Novel High-Pressure Yttrium Carbide γ-Y_{4}C_{5} Containing [C_{2}] and Nonlinear [C_{3}] Units with Unusually Large Formal Charges

Changes in the bonding of carbon under high pressure leads to unusual crystal chemistry and can dramatically alter the properties of transition metal carbides. In this work, the new orthorhombic polymorph of yttrium carbide, γ-Y_{4}C_{5}, was synthesized from yttrium and paraffin oil in a laser-heated diamond anvil cell at ∼50  GPa. The structure of γ-Y_{4}C_{5} was solved and refined using in situ synchrotron single-crystal x-ray diffraction. It includes two carbon groups: [C_{2}] dimers and nonlinear [C_{3}] trimers. Crystal chemical analysis and density functional theory calculations revealed unusually high noninteger charges ([C_{2}]^{5.2-} and [C_{3}]^{6.8-}) and unique bond orders (<1.5). Our results extend the list of possible carbon states at extreme conditions.

Realization of an Ideal Cairo Tessellation in Nickel Diazenide NiN2: High-Pressure Route to Pentagonal 2D Materials

Most of the studied two-dimensional (2D) materials are based on highly symmetric hexagonal structural motifs. In contrast, lower-symmetry structures may have exciting anisotropic properties leading to various applications in nanoelectronics. In this work we report the synthesis of nickel diazenide NiN₂ which possesses atomic-thick layers comprised of Ni₂N₃ pentagons forming Cairo-type tessellation. The layers of NiN₂ are weakly bonded with the calculated exfoliation energy of 0.72 J/m², which is just slightly larger than that of graphene. The compound crystallizes in the space group of the ideal Cairo tiling (P4/mbm) and possesses significant anisotropy of elastic properties. The single-layer NiN₂ is a direct-band-gap semiconductor, while the bulk material is metallic. This indicates the promise of NiN₂ to be a precursor of a pentagonal 2D material with a tunable direct band gap.

High-Pressure Synthesis of Dirac Materials: Layered van der Waals Bonded BeN_{4} Polymorph

High-pressure chemistry is known to inspire the creation of unexpected new classes of compounds with exceptional properties. Here, we employ the laser-heated diamond anvil cell technique for synthesis of a Dirac material BeN_{4}. A triclinic phase of beryllium tetranitride tr-BeN_{4} was synthesized from elements at ∼85  GPa. Upon decompression to ambient conditions, it transforms into a compound with atomic-thick BeN_{4} layers interconnected via weak van der Waals bonds and consisting of polyacetylene-like nitrogen chains with conjugated π systems and Be atoms in square-planar coordination. Theoretical calculations for a single BeN_{4} layer show that its electronic lattice is described by a slightly distorted honeycomb structure reminiscent of the graphene lattice and the presence of Dirac points in the electronic band structure at the Fermi level. The BeN_{4} layer, i.e., beryllonitrene, represents a qualitatively new class of 2D materials that can be built of a metal atom and polymeric nitrogen chains and host anisotropic Dirac fermions.

Stabilization of pentazolate anions in the high-pressure compounds Na2N5 and NaN5 and in the sodium pentazolate framework NaN5·N2

Synthesis and characterization of nitrogen-rich materials is important for the design of novel high energy density materials due to extremely energetic low-order nitrogen-nitrogen bonds. The balance between the energy output and stability may be achieved if polynitrogen units are stabilized by resonance as in cyclo-N5- pentazolate salts. Here we demonstrate the synthesis of three oxygen-free pentazolate salts Na2N5, NaN5 and NaN5·N2 from sodium azide NaN3 and molecular nitrogen N2 at ∼50 GPa. NaN5·N2 is a metal-pentazolate framework (MPF) obtained via a self-templated synthesis method with nitrogen molecules being incorporated into the nanochannels of the MPF. Such self-assembled MPFs may be common in a variety of ionic pentazolate compounds. The formation of Na2N5 demonstrates that the cyclo-N5 group can accommodate more than one electron and indicates the great accessible compositional diversity of pentazolate salts.